The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The field parerr_wat_wcp_mask in the structure adf_dev_err_mask enables
the detection and reporting of parity errors for the wireless cipher and
wireless authentication accelerators.
Set the parerr_wat_wcp_mask field, which was inadvertently omitted
during the initial enablement of the qat_420xx driver, to ensure that
parity errors are enabled for those accelerators.
In addition, fix the string used to report such errors that was
inadvertently set to "ath_cph" (authentication and cipher).
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memory requested to hold the image data for authentication will
never exceed `ICP_QAT_CSS_RSA4K_MAX_IMAGE_LEN`. Therefore, we can
simplify the allocation by always requesting the maximum size needed for
any image.
Also introduce the following checks:
* Ensure the allocated memory is 8-byte aligned to meet the
requirements of the authentication firmware.
* Prevent overflow when constructing the authentication descriptor.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The FW image size check is already performed in the function
qat_uclo_check_image() before calling `qat_uclo_map_auth_fw()`.
Therefore, the additional check in `qat_uclo_map_auth_fw()` is redundant
and can be safely removed.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the members `css_key` and `css_signature` which are not used for
doing the firmware authentication.
The signed image pointer can be calculated using the pointer to the CSS
header and the length of the CSS header, making these members redundant.
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the representation of fuses in the accelerator device
structure from a single value to an array.
This allows the structure to accommodate additional fuses that
are required for future generations of QAT hardware.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce the ADF_CSR_WR_LO_HI macro to simplify writing a 64-bit values
to hardware registers.
This macro works by splitting the 64-bit value into two 32-bit segments,
which are then written separately to the specified lower and upper
register offsets.
Update the adf_gen4_set_ssm_wdtimer() function to utilize this newly
introduced macro.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test the correct flags for the MAY_SLEEP bit.
Fixes: 2ec6761df8 ("crypto: iaa - Add support for deflate-iaa compression algorithm")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The service parsing logic is used to parse the configuration string
provided by the user using the attribute qat/cfg_services in sysfs.
The logic relies on hard-coded strings. For example, the service
"sym;asym" is also replicated as "asym;sym".
This makes the addition of new services or service combinations
complex as it requires the addition of new hard-coded strings for all
possible combinations.
This commit addresses this issue by:
* reducing the number of internal service strings to only the basic
service representations.
* modifying the service parsing logic to analyze the service string
token by token instead of comparing a whole string with patterns.
* introducing the concept of a service mask where each service is
represented by a single bit.
* dividing the parsing logic into several functions to allow for code
reuse (e.g. by sysfs-related functions).
* introducing a new, device generation-specific function to verify
whether the requested service combination is supported by the
currently used device.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The symbol `adf_cfg_services` is only used on the intel_qat module.
There is no need to export it.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The objects in the qat_common Makefile are currently listed in a random
order.
Reorder the objects alphabetically to make it easier to find where to
add a new object.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Align with kbuild documentation by using <module_name>-y instead of
<module_name>-objs, following the kernel convention for building modules
from multiple object files.
Link: https://docs.kernel.org/kbuild/makefiles.html#loadable-module-goals-obj-m
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The XP10 algorithm is not supported by any QAT device.
Remove the definition of bit 7 (ICP_QAT_FW_COMP_20_CMD_XP10_COMPRESS)
and bit 8 (ICP_QAT_FW_COMP_20_CMD_XP10_DECOMPRESS) in the firmware
command id enum and rename them as reserved.
Those bits shall not be used in future.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
With the latest mm-unstable, setting the iaa_crypto sync_mode to 'async'
causes crypto testmgr.c test_acomp() failure and dmesg call traces, and
zswap being unable to use 'deflate-iaa' as a compressor:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
[ 255.271030] zswap: compressor deflate-iaa not available
[ 369.960673] INFO: task cryptomgr_test:4889 blocked for more than 122 seconds.
[ 369.970127] Not tainted 6.13.0-rc1-mm-unstable-12-16-2024+ #324
[ 369.977411] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 369.986246] task:cryptomgr_test state:D stack:0 pid:4889 tgid:4889 ppid:2 flags:0x00004000
[ 369.986253] Call Trace:
[ 369.986256] <TASK>
[ 369.986260] __schedule+0x45c/0xfa0
[ 369.986273] schedule+0x2e/0xb0
[ 369.986277] schedule_timeout+0xe7/0x100
[ 369.986284] ? __prepare_to_swait+0x4e/0x70
[ 369.986290] wait_for_completion+0x8d/0x120
[ 369.986293] test_acomp+0x284/0x670
[ 369.986305] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986312] alg_test_comp+0x263/0x440
[ 369.986315] ? sched_balance_newidle+0x259/0x430
[ 369.986320] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986323] alg_test.part.27+0x103/0x410
[ 369.986326] ? __schedule+0x464/0xfa0
[ 369.986330] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986333] cryptomgr_test+0x20/0x40
[ 369.986336] kthread+0xda/0x110
[ 369.986344] ? __pfx_kthread+0x10/0x10
[ 369.986346] ret_from_fork+0x2d/0x40
[ 369.986355] ? __pfx_kthread+0x10/0x10
[ 369.986358] ret_from_fork_asm+0x1a/0x30
[ 369.986365] </TASK>
This happens because the only async polling without interrupts that
iaa_crypto currently implements is with the 'sync' mode. With 'async',
iaa_crypto calls to compress/decompress submit the descriptor and return
-EINPROGRESS, without any mechanism in the driver to poll for
completions. Hence callers such as test_acomp() in crypto/testmgr.c or
zswap, that wrap the calls to crypto_acomp_compress() and
crypto_acomp_decompress() in synchronous wrappers, will block
indefinitely. Even before zswap can notice this problem, the crypto
testmgr.c's test_acomp() will fail and prevent registration of
"deflate-iaa" as a valid crypto acomp algorithm, thereby disallowing the
use of "deflate-iaa" as a zswap compress (zswap will fall-back to the
default compressor in this case).
To fix this issue, this patch modifies the iaa_crypto sync_mode set
function to treat 'async' equivalent to 'sync', so that the correct and
only supported driver async polling without interrupts implementation is
enabled, and zswap can use 'deflate-iaa' as the compressor.
Hence, with this patch, this is what will happen:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
cat /sys/bus/dsa/drivers/crypto/sync_mode
sync
There are no crypto/testmgr.c test_acomp() errors, no call traces and zswap
can use 'deflate-iaa' without any errors. The iaa_crypto documentation has
also been updated to mention this caveat with 'async' and what to expect
with this fix.
True iaa_crypto async polling without interrupts is enabled in patch
"crypto: iaa - Implement batch_compress(), batch_decompress() API in
iaa_crypto." [1] which is under review as part of the "zswap IAA compress
batching" patch-series [2]. Until this is merged, we would appreciate it if
this current patch can be considered for a hotfix.
[1]: https://patchwork.kernel.org/project/linux-mm/patch/20241221063119.29140-5-kanchana.p.sridhar@intel.com/
[2]: https://patchwork.kernel.org/project/linux-mm/list/?series=920084
Fixes: 09646c98d ("crypto: iaa - Add irq support for the crypto async interface")
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
init_ixp_crypto() calls of_parse_phandle_with_fixed_args() multiple
times, but does not release all the obtained refcounts. Fix it by adding
of_node_put() calls.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 76f24b4f46 ("crypto: ixp4xx - Add device tree support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
The adf_init_aer() won't destroy device_reset_wq when alloc_workqueue()
for device_sriov_wq failed. Add destroy_workqueue for device_reset_wq to
fix this issue.
Fixes: 4469f9b234 ("crypto: qat - re-enable sriov after pf reset")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pcim_iomap_table() and pcim_iomap_regions_request_all() have been
deprecated by the PCI subsystem in commit e354bb84a4 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with their successors, pcim_iomap() and
pcim_request_all_regions().
Link: https://lore.kernel.org/r/20241030112743.104395-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
There is a spelling mistake of 'accelaration' in comments which
should be 'acceleration'.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'struct pm_status_row' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security.
Update the prototype of some functions accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4400 1059 0 5459 1553 drivers/crypto/intel/qat/qat_common/adf_gen4_pm_debugfs.o
After:
=====
text data bss dec hex filename
5216 243 0 5459 1553 drivers/crypto/intel/qat/qat_common/adf_gen4_pm_debugfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/crypto to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Resetting the service arbiter config can cause potential issues
related to response ordering and ring flow control check in the
event of AER or device hang. This is because it results in changing
the default response ring size from 32 bytes to 16 bytes. The service
arbiter config reset also disables response ring flow control check.
Thus, by removing this reset we can prevent the service arbiter from
being configured inappropriately, which leads to undesired device
behaviour in the event of errors.
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
adf_devmgr_get_first has been unused since commit
4a4b0bad06 ("crypto: qat - fix crypto_get_instance_node function")
Remove it.
(Build tested only, I don't own the hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fw_objs[] array has "num_objs" elements so the > needs to be >= to
prevent an out of bounds read.
Fixes: 10484c647a ("crypto: qat - refactor fw config logic for 4xxx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is called from uof_get_name_420xx() where "num_objs" is the
ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of
bounds access.
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For iaa_crypto operations, it's assumed that if an operation doesn't
make progress, the IAA watchdog timer will kick in and set the
completion status bit to failure and the reason to completion timeout.
Some systems may have broken hardware that doesn't even do that, which
can result in an infinite status-checking loop. Add a check for that
in the loop, and disable the driver if it occurs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The debugfs functions are guaranteed to return a valid error code
instead of NULL upon failure. Consequently, the driver can directly
propagate any error returned without additional checks.
Remove the unnecessary `if` statement after debugfs_create_dir(). If
this function fails, the error code is stored in accel_dev->debugfs_dir
and utilized in subsequent debugfs calls.
Additionally, since accel_dev->debugfs_dir is assured to be non-NULL,
remove the superfluous NULL pointer checks within the adf_dbgfs_add()
and adf_dbgfs_rm().
Fixes: 9260db6640 ("crypto: qat - move dbgfs init to separate file")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a extraneous space after a newline in a pr_err message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The macro `ADF_RP_INT_SRC_SEL_F_RISE_MASK` is currently set to the value
`0100b` which means "Empty Going False". This might cause an incorrect
restore of the bank state during live migration.
Fix the definition of the macro to properly represent the "Full Going
True" state which is encoded as `0011b`.
Fixes: bbfdde7d19 ("crypto: qat - add bank save and restore flows")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Reviewed-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 140e4c85d5 ("crypto: qat - Avoid -Wflex-array-member-not-at-end
warnings") introduced tagged `struct qat_alg_buf_list_hdr`. We want to
ensure that when new members need to be added to the flexible structure,
they are always included within this tagged struct.
So, we use `static_assert()` to ensure that the memory layout for
both the flexible structure and the tagged struct is the same after
any changes.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The free_device_compression_mode(iaa_device, device_mode) function frees
"device_mode" but it iss passed to iaa_compression_modes[i]->free() a few
lines later resulting in a use after free.
The good news is that, so far as I can tell, nothing implements the
->free() function and the use after free happens in dead code. But, with
this fix, when something does implement it, we'll be ready. :)
Fixes: b190447e0f ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT driver allows enabling SR-IOV VFs but does not allow them to be
disabled through a write to sysfs.
Disabling SR-IOV VFs can be only achieved by bringing down and up a
device using the attribute /sys/bus/pci/devices/<BDF>/qat/state.
The documentation for the sysfs attribute `sriov_numvfs` specifies
that "a userspace application wanting to disable the VFs would write a
zero to this file".
Add support for disabling SR-IOV VFs by writing '0' to the
'sriov_numvfs' attribute in sysfs.
Enabling or disabling SR-IOV always requires adf_dev_down() to be
called. This action subsequently leads to the deletion of the
ADF_KERNEL_SEC configuration section. The keys ADF_NUM_CY and ADF_NUM_DC
within that section must be set to '0', otherwise, the driver will
register into the Linux Crypto Framework. Because of this, the
configuration in the ADF_KERNEL_SEC section must be added before every
sriov_enable.
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the process of sending the ADF_PF2VF_MSGTYPE_RESTARTING message to
Virtual Functions (VFs), the Physical Function (PF) should set the
`vf->restarting` flag to true before dispatching the message.
This change is necessary to prevent a race condition where the handling
of the ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE message (which sets the
`vf->restarting` flag to false) runs immediately after the message is sent,
but before the flag is set to true.
Set the `vf->restarting` to true before sending the message
ADF_PF2VF_MSGTYPE_RESTARTING, if supported by the version of the
protocol and if the VF is started.
Fixes: ec26f8e6c7 ("crypto: qat - update PFVF protocol for recovery")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the PFVF protocol was updated to support version 5, i.e.
ADF_PFVF_COMPAT_FALLBACK, the compatibility version for the VF was
updated without supporting the message RESTARTING_COMPLETE required for
such version.
Add support for the ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE message in the
VF drivers. This message is sent by the VF driver to the PF to notify
the completion of the shutdown flow.
Fixes: ec26f8e6c7 ("crypto: qat - update PFVF protocol for recovery")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Disabling IOV has the side effect of re-enabling the AEs that might
attempt to do DMAs into the heartbeat buffers.
Move the disable_iov() function in adf_dev_stop() before the AEs are
stopped.
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ADF_GENERAL_SEC configuration section contains values that must be
preserved during state transitions (down -> up, up -> down).
This patch modifies the logic in adf_dev_shutdown() to maintain all
key values within this section, rather than selectively saving and
restoring only the ADF_SERVICES_ENABLED attribute.
To achieve this, a new function has been introduced that deletes all
configuration sections except for the one specified by name.
This function is invoked during adf_dev_down(), with ADF_GENERAL_SEC
as the argument. Consequently, the adf_dev_shutdown_cache_cfg() function
has been removed as it is now redundant.
Additionally, this patch eliminates the cache_config parameter from
the adf_dev_down() function since ADF_GENERAL_SEC should always be
retained. This change does not cause any side effects because all
entries in the key-value store are cleared when a module is unloaded.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Co-developed-by: Michal Witwicki <michal.witwicki@intel.com>
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Test setkey in no-SIMD context.
- Add skcipher speed test for user-specified algorithm.
Algorithms:
- Add x25519 support on ppc64le.
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86.
- Remove sm2 algorithm.
Drivers:
- Add Allwinner H616 support to sun8i-ce.
- Use DMA in stm32.
- Add Exynos850 hwrng support to exynos.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmaZFsgACgkQxycdCkmx
i6f76Q//ej7akY9fo6/qsn8UFK16O0SCEMkx7TrkxqHV8R6uwy4ret3+b5dbckY6
hBjDabiL/BAdNzo8hvta+BOtN6ToEqquSVwNCpX0U3YMLf9dIzcMA4Uri3LbxUHi
x9Qa8klI5x62Kg+RW+ovaJC4C11oKTpjVeDn4S57MudlBnhEa3DYcEADKiUowkEz
aigtLx8HrZYjwkQxwgWeS0xzeojhW1P20yaghOd6hTCD7vKw18JaKdD8r4YFGOBu
39eDaM/0vR+wWokk3NNl6NmXieBT8qLFt+OIbQs6b3gX9K37daahRs1VoShcL+ix
l8GaqLpo1n1llVrV1OWzyVLVLtYK849QEo6OmlusnbK7e5pQKEOXoACQ0VB8ElNE
1u7KNW6CBWGzr33dWPgl9yYBrT3BmMXABIK4dNmTicJsK2zk2FPKbLDZNi8fWah/
D46mv7Rb8EtTdhN56EzceUJpd1ZfmP9S4vY1Hu8YdmI1pxex11US/XppKLoyymqp
vNOzf85VuZ/GkUPfHdyWAFBnTaCjXtSBrlXD6+0nxavU9KGli0PLLX5tKNNWGw0l
51Z0tbNsDbo3Z+sMmtfvBXR2V8NwiAT5f775W0lLvpq/44mbDpdN3jGvfy9y9C7u
1DUC6F0XtUhZjR7e6/EhvHh3lB/a3w/m3+XC+XzDeox/VYTrC3Q=
=x80X
-----END PGP SIGNATURE-----
Merge tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Test setkey in no-SIMD context
- Add skcipher speed test for user-specified algorithm
Algorithms:
- Add x25519 support on ppc64le
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86
- Remove sm2 algorithm
Drivers:
- Add Allwinner H616 support to sun8i-ce
- Use DMA in stm32
- Add Exynos850 hwrng support to exynos"
* tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (81 commits)
hwrng: core - remove (un)register_miscdev()
crypto: lib/mpi - delete unnecessary condition
crypto: testmgr - generate power-of-2 lengths more often
crypto: mxs-dcp - Ensure payload is zero when using key slot
hwrng: Kconfig - Do not enable by default CN10K driver
crypto: starfive - Fix nent assignment in rsa dec
crypto: starfive - Align rsa input data to 32-bit
crypto: qat - fix unintentional re-enabling of error interrupts
crypto: qat - extend scope of lock in adf_cfg_add_key_value_param()
Documentation: qat: fix auto_reset attribute details
crypto: sun8i-ce - add Allwinner H616 support
crypto: sun8i-ce - wrap accesses to descriptor address fields
dt-bindings: crypto: sun8i-ce: Add compatible for H616
hwrng: core - Fix wrong quality calculation at hw rng registration
hwrng: exynos - Enable Exynos850 support
hwrng: exynos - Add SMC based TRNG operation
hwrng: exynos - Implement bus clock control
hwrng: exynos - Use devm_clk_get_enabled() to get the clock
hwrng: exynos - Improve coding style
dt-bindings: rng: Add Exynos850 support to exynos-trng
...
The logic that detects pending VF2PF interrupts unintentionally clears
the section of the error mask register(s) not related to VF2PF.
This might cause interrupts unrelated to VF2PF, reported through
errsou3 and errsou5, to be reported again after the execution
of the function disable_pending_vf2pf_interrupts() in dh895xcc
and GEN2 devices.
Fix by updating only section of errmsk3 and errmsk5 related to VF2PF.
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_cfg_add_key_value_param() attempts to access and modify
the key value store of the driver without locking.
Extend the scope of cfg->lock to avoid a potential race condition.
Fixes: 92bf269fbf ("crypto: qat - change behaviour of adf_cfg_add_key_value_param()")
Signed-off-by: Nivas Varadharajan Mugunthakumar <nivasx.varadharajan.mugunthakumar@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu
Bairavi Alagappan
Jack Xu
Suman Kumar Chakraborty
Małgorzata Mielnik
Giovanni Cabiddu
Krzysztof Kozlowski
Linus Torvalds
Al Viro
Kanchana P Sridhar
Joe Hattori
Masahiro Yamada
Peter Zijlstra
Wang Hai
Philipp Stanner
WangYuli
Christophe JAILLET
Uwe Kleine-König
Ahsan Atta
Dr. David Alan Gilbert
Dan Carpenter
Zanussi, Tom
Colin Ian King
Svyatoslav Pankratov
Liao Chen
Gustavo A. R. Silva
Michal Witwicki
Adam Guerin
Hareshx Sankar Raj
Nivas Varadharajan Mugunthakumar
Jiwei Sun