* The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed.
* The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings.
* Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling.
* Support for relocatable !MMU kernels builds.
* Support for hpge pfnmaps, which should improve TLB utilization.
* Support for runtime constants, which improves the d_hash()
performance.
* Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm.
* Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU.
- Fix ftrace panics by saving the registers as expected by ftrace.
- Fix a couple of stimecmp usage related to cpu hotplug.
- purgatory_start is now aligned as per the STVEC requirements.
- A fix for hugetlb when calculating the size of non-present PTEs.
-----BEGIN PGP SIGNATURE-----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=nCJo
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Added quirks for enabling multi-cluster mode on EyeQ6
Added DTS clocks for ralink
Cleanup realtek DTS
Other cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=hUDw
-----END PGP SIGNATURE-----
Merge tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- Add support for multi-cluster configuration
- Add quirks for enabling multi-cluster mode on EyeQ6
- Add DTS clocks for ralink
- Cleanup realtek DTS
- Other cleanups and fixes
* tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (35 commits)
MIPS: config: omega2+, vocore2: enable CLK_MTMIPS
arch: mips: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
MIPS: cm: Fix warning if MIPS_CM is disabled
MIPS: Fix Macro name
MIPS: ds1287: Match ds1287_set_base_clock() function types
MIPS: cevt-ds1287: Add missing ds1287.h include
MIPS: dec: Declare which_prom() as static
MIPS: Loongson2ef: Replace deprecated strncpy() with strscpy()
mips: dts: ralink: mt7628a: update system controller node and its consumers
mips: dts: ralink: mt7620a: update system controller node and its consumers
mips: dts: ralink: rt3883: update system controller node and its consumers
mips: dts: ralink: rt3050: update system controller node and its consumers
mips: dts: ralink: rt2880: update system controller node and its consumers
dt-bindings: clock: add clock definitions for Ralink SoCs
MIPS: Use arch specific syscall name match function
mips: dts: realtek: Add restart to Cisco SG220-26P
mips: dts: realtek: Add RTL838x SoC peripherals
mips: dts: realtek: Replace uart clock property
mips: dts: realtek: Correct uart interrupt-parent
mips: dts: realtek: Add SoC IRQ node for RTL838x
...
- Add support for suspend/resume in the STM32 LP-Timer driver with a
follow up fix, which uses the proper method to setup the timer as a
optional wakeup source instead of trying to force it as mandatory
wakeup source.
- The usual device tree updates to enable new SoC models in existing
drivers.
- Trivial spelling, style and indentation fixes
-----BEGIN PGP SIGNATURE-----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=hwyg
-----END PGP SIGNATURE-----
Merge tag 'timers-clocksource-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource/event updates from Thomas Gleixner:
- Add support for suspend/resume in the STM32 LP-Timer driver with a
follow up fix, which uses the proper method to setup the timer as a
optional wakeup source instead of trying to force it as mandatory
wakeup source.
- The usual device tree updates to enable new SoC models in existing
drivers.
- Trivial spelling, style and indentation fixes
* tag 'timers-clocksource-2025-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: timer: Add SiFive CLINT2
clocksource/drivers/stm32-lptimer: Use wakeup capable instead of init wakeup
clocksource/drivers/exynos_mct: Fixed a spelling error
clocksource/drivers/stm32-lptimer: Add support for suspend / resume
dt-bindings: timer: exynos4210-mct: add samsung,exynos2200-mct-peris compatible
dt-bindings: timer: exynos4210-mct: Add samsung,exynos990-mct compatible
dt-bindings: timer: Correct indentation and style in DTS example
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmfhlLATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgchCADOz33rSm4G4w4r0qT05dTDi/lZkEdK
64dQq322XXP/C9FfR66d30243gsAmuM5a0SvzFHLXAOu6yqM270Xehd/Rud+Um2s
lSVnc0Ux0AWBgksqFd0t577aN7zmJEukosEYO5lBNop+zOcadrm3S6Th/AoL2h/D
yphPkhH13bsCK+Wll/eBOQLIhC9iA0konYbBLuEQ5MqvUbrzc6Rmb5gxsHHZKOqg
vLjkrYR/d3s2gIpKxiFp0RwvzGyffZEHxvU/YF3hTenPMlTlnXWbyspBSTVmWggP
13IFLzqxDdW9RgUnGB4xRc424AC1LKqEr42QPQE7zGvl2jdJriA2Q1LT
=BXqj
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Add support for running as the root partition in Hyper-V (Microsoft
Hypervisor) by exposing /dev/mshv (Nuno and various people)
- Add support for CPU offlining in Hyper-V (Hamza Mahfooz)
- Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael
Kelley, Thorsten Blum)
* tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: fix an indentation issue in mshyperv.h
x86/hyperv: Add comments about hv_vpset and var size hypercall input args
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs
hyperv: Add definitions for root partition driver to hv headers
x86: hyperv: Add mshv_handler() irq handler and setup function
Drivers: hv: Introduce per-cpu event ring tail
Drivers: hv: Export some functions for use by root partition module
acpi: numa: Export node_to_pxm()
hyperv: Introduce hv_recommend_using_aeoi()
arm64/hyperv: Add some missing functions to arm64
x86/mshyperv: Add support for extended Hyper-V features
hyperv: Log hypercall status codes as strings
x86/hyperv: Fix check of return value from snp_set_vmsa()
x86/hyperv: Add VTL mode callback for restarting the system
x86/hyperv: Add VTL mode emergency restart callback
hyperv: Remove unused union and structs
hyperv: Add CONFIG_MSHV_ROOT to gate root partition support
hyperv: Change hv_root_partition into a function
hyperv: Convert hypercall statuses to linux error codes
drivers/hv: add CPU offlining support
...
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Nick Hu <nick.hu@sifive.com> says:
When the cpu is going to be hotplug, stop the stimecmp to prevent pending
interrupt.
When the cpu is going to be suspended, save the stimecmp before entering
the suspend state and restore it in the resume path.
* patches from https://lore.kernel.org/r/20250219114135.27764-1-nick.hu@sifive.com:
clocksource/drivers/timer-riscv: Stop stimecmp when cpu hotplug
riscv: Add stimecmp save and restore
Link: https://lore.kernel.org/r/20250219114135.27764-1-nick.hu@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Add support for power management on STM32 LPTIMER clocksource driver:
- Upon clockevents_suspend(), shutdown the LPTIMER, and balance the
clk_prepare_enable() from the probe routine.
- Upon clockevents_resume(), restore the prescaler that may have been lost
during low power mode, and restore the clock.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250224172101.3448398-1-fabrice.gasnier@foss.st.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
These changes lay the groundwork for adding support for guest kernels,
allowing them to leverage target CPU implementations provided by the
VMM.
No functional changes intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250221140229.12588-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Introduce hv_curr_partition_type to store the partition type
as an enum.
Right now this is limited to guest or root partition, but there will
be other kinds in future and the enum is easily extensible.
Set up hv_curr_partition_type early in Hyper-V initialization with
hv_identify_partition_type(). hv_root_partition() just queries this
value, and shouldn't be called before that.
Making this check into a function sets the stage for adding a config
option to gate the compilation of root partition code. In particular,
hv_root_partition() can be stubbed out always be false if root
partition support isn't desired.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-3-git-send-email-nunodasneves@linux.microsoft.com>
In multi-cluster MIPS I6500 systems there is a GIC in each cluster,
each with its own counter. When a cluster powers up the counter will
be stopped, with the COUNTSTOP bit set in the GIC_CONFIG register.
In single cluster systems, it has been fine to clear COUNTSTOP once
in gic_clocksource_of_init() to start the counter. In multi-cluster
systems, this will only have started the counter in the boot cluster,
and any CPUs in other clusters will find their counter stopped which
will break the GIC clock_event_device.
Resolve this by having CPUs clear the COUNTSTOP bit when they come
online, using the existing gic_starting_cpu() CPU hotplug callback. This
will allow CPUs in secondary clusters to ensure that the cluster's GIC
counter is running as expected.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu
Switch to using hvhdk.h everywhere in the kernel. This header
includes all the new Hyper-V headers in include/hyperv, which form a
superset of the definitions found in hyperv-tlfs.h.
This makes it easier to add new Hyper-V interfaces without being
restricted to those in the TLFS doc (reflected in hyperv-tlfs.h).
To be more consistent with the original Hyper-V code, the names of
some definitions are changed slightly. Update those where needed.
Update comments in mshyperv.h files to point to include/hyperv for
adding new definitions.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/1732577084-2122-5-git-send-email-nunodasneves@linux.microsoft.com
Link: https://lore.kernel.org/r/20250108222138.1623703-3-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is
bigger than the variable hv_sched_clock_offset, which is cached during
early boot, but depending on the timing this assumption may be false
when a hibernated VM starts again (the clock counter starts from 0
again) and is resuming back (Note: hv_init_tsc_clocksource() is not
called during hibernation/resume); consequently,
read_hv_sched_clock_tsc() may return a negative integer (which is
interpreted as a huge positive integer since the return type is u64)
and new kernel messages are prefixed with huge timestamps before
read_hv_sched_clock_tsc() grows big enough (which typically takes
several seconds).
Fix the issue by saving the Hyper-V clock counter just before the
suspend, and using it to correct the hv_sched_clock_offset in
resume. This makes hv tsc page based sched_clock continuous and ensures
that post resume, it starts from where it left off during suspend.
Override x86_platform.save_sched_clock_state and
x86_platform.restore_sched_clock_state routines to correct this as soon
as possible.
Note: if Invariant TSC is available, the issue doesn't happen because
1) we don't register read_hv_sched_clock_tsc() for sched clock:
See commit e5313f1c54 ("clocksource/drivers/hyper-v: Rework
clocksource and sched clock setup");
2) the common x86 code adjusts TSC similarly: see
__restore_processor_state() -> tsc_verify_tsc_adjust(true) and
x86_platform.restore_sched_clock_state().
Cc: stable@vger.kernel.org
Fixes: 1349401ff1 ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation")
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241104190505.272805-2-robh@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In the function gxp_timer_init, the 'int' type cast in front of the
PTR_ERR() macro is redundant, thus remove it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241107074619.2714-1-tangbin@cmss.chinamobile.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
of_find_compatible_node() increments the node's refcount, and it must be
decremented again with a call to of_node_put() when the pointer is no
longer required to avoid leaking the resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'arm_timer' by means of the
__free() macro, which automatically calls of_node_put() when the
variable goes out of scope.
Fixes: 25de4ce5ed ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241031-timer-ti-dm-systimer-of_node_put-v3-1-063ee822b73a@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
System Tick Counter is present on Ralink SoCs RT3352 and MT7620. This
driver has been in 'arch/mips/ralink' directory since the beggining of
Ralink architecture support. However, it can be moved into a more proper
place in 'drivers/clocksource'. Hence add it here adding also support for
compile test targets and reducing LOC in architecture code folder.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20241028203643.191268-2-sergio.paracuellos@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In a multi-cluster MIPS system, there are multiple GICs - one in each
cluster - each of which has its independent counter. The counters in
each GIC are not synchronized in any way, so they can drift relative
to one another through the lifetime of the system. This is problematic
for a clock source which ought to be global.
Avoid problems by always accessing cluster 0's counter, using
cross-cluster register access. This adds overhead so it is applied only
on multi-cluster systems.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <arikalo@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20241019071037.145314-6-arikalo@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Some timers may not have an interrupt routed to the A53 GIC, but the
timer PWM functionality can still be used by Linux Kernel. Therefore,
do not fail probe if interrupt is not found and ti,timer-pwm exists.
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20241011175203.1040568-1-jm@ti.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The sp804 is currently only user selectable if COMPILE_TEST, this was
done by commit dfc82faad7 ("clocksource/drivers/sp804: Add
COMPILE_TEST to CONFIG_ARM_TIMER_SP804") in order to avoid it being
spuriously offered on platforms that won't have the hardware since it's
generally only seen on Arm based platforms. This config is overly
restrictive, while platforms that rely on the SP804 do select it in
their Kconfig there are others such as the Arm fast models which have a
SP804 available but currently unused by Linux. Relax the dependency to
allow it to be user selectable on arm and arm64 to avoid surprises and
in case someone comes up with a use for extra timer hardware.
Fixes: dfc82faad7 ("clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804")
Reported-by: Ross Burton <ross.burton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-vexpress-sp804-v3-1-0a2d3f7883e4@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
dw_apb_clockevent_pause(), dw_apb_clockevent_resume() and
dw_apb_clockevent_stop() have been unused since 2021's
commit 1b79fc4f2b ("x86/apb_timer: Remove driver for deprecated
platform")
Remove them.
(Some of the other clockevent functions are still called by
dw_apb_timer_of.c so I guess it is still in use?)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241025203101.241709-1-linux@treblig.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
- Use the topology information of number of packages for making the
decision about TSC trust instead of using the number of online nodes
which is not reflecting the real topology.
- Stop the PIT timer 0 when its not in use as to stop pointless emulation
in the VMM.
- Fix the PIT timer stop sequence for timer 0 so it truly stops both real
hardware and buggy VMM emulations.
-----BEGIN PGP SIGNATURE-----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=1vKt
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
- Use the topology information of number of packages for making the
decision about TSC trust instead of using the number of online nodes
which is not reflecting the real topology.
- Stop the PIT timer 0 when its not in use as to stop pointless
emulation in the VMM.
- Fix the PIT timer stop sequence for timer 0 so it truly stops both
real hardware and buggy VMM emulations.
* tag 'x86-timers-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Check for sockets instead of CPUs to make code match comment
clockevents/drivers/i8253: Fix stop sequence for timer 0
x86/i8253: Disable PIT timer 0 when not in use
x86/tsc: Use topology_max_packages() to get package number
- Core:
- Overhaul of posix-timers in preparation of removing the
workaround for periodic timers which have signal delivery
ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep
time since the large rewrite to a non-cascading wheel, but the
extra jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack
for real time tasks and enforce it at the core level instead of
having inconsistent individual checks in various timer setup
functions.
- The usual set of updates and enhancements all over the place.
- Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers
-----BEGIN PGP SIGNATURE-----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=jE0N
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmbeRpsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXsDDB/4oL6ypxiF3/yo+xR6bt8HlzIfcVeTx
EuDR+a/hDRQdShMbNtgaF2OxovMO1W5Se2hCoNrKbVxrPRHL6gUuZASdm93l75eh
l8I0muQif1q9rEXNbwQxe/ydE0860OgmE/ZGv944BXBtirG1fGHei1DNKkdL6VJy
iEmmURwz7Ykg5neqwzYBY9SV7P/wwWZNR8GIRTWHhWU+ok1cYpehAs1dpQleAxsz
WZCQLfIMXdSJBSDB/YO7JAlykZ1DkkTkI8pfbe2diReaDSw2QYsnsPXD6MVZArLO
73kDojwb0LitLyWYEjm07ipOApkzYrEGTXjlLNdUVVF1Fx20nohu8jRd
=k5P6
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20240908' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Add a documentation overview of Confidential Computing VM support
(Michael Kelley)
- Use lapic timer in a TDX VM without paravisor (Dexuan Cui)
- Set X86_FEATURE_TSC_KNOWN_FREQ when Hyper-V provides frequency
(Michael Kelley)
- Fix a kexec crash due to VP assist page corruption (Anirudh
Rayabharam)
- Python3 compatibility fix for lsvmbus (Anthony Nandaa)
- Misc fixes (Rachel Menge, Roman Kisel, zhang jiao, Hongbo Li)
* tag 'hyperv-fixes-signed-20240908' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv: vmbus: Constify struct kobj_type and struct attribute_group
tools: hv: rm .*.cmd when make clean
x86/hyperv: fix kexec crash due to VP assist page corruption
Drivers: hv: vmbus: Fix the misplaced function description
tools: hv: lsvmbus: change shebang to use python3
x86/hyperv: Set X86_FEATURE_TSC_KNOWN_FREQ when Hyper-V provides frequency
Documentation: hyperv: Add overview of Confidential Computing VM support
clocksource: hyper-v: Use lapic timer in a TDX VM without paravisor
Drivers: hv: Remove deprecated hv_fcopy declarations
Add the missing clk_disable_unprepare() before return in
ttc_setup_clockevent().
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240803064253.331946-3-cuigaosheng1@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add the missing iounmap() when clock frequency fails to get read by the
of_property_read_u32() call, or if the call to msm_timer_init() fails.
Fixes: 6e3321631a ("ARM: msm: Add DT support to msm_timer")
Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
Link: https://lore.kernel.org/r/20240820094603.103598-1-link@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Provides the capability to register an external callback for the ACPI PM
timer, which is called during the suspend and resume processes.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240812184150.1079924-1-mmaslanka@google.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
for_each_available_child_of_node_scoped() can put the device_node
automatically. So, using it to make the code logic more simple and
remove the device_node clean up code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240807074655.52157-1-zhangzekun11@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The value written into the TPM CnV can only be updated into the hardware
when the counter increases. Additional writes to the CnV write buffer are
ignored until the register has been updated. Therefore, we need to check
if the CnV has been updated before continuing. This may require waiting for
1 counter cycle in the worst case.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta
is larger than INT_MAX.
For example:
tpm_set_next_event(delta = 0xffff_fffe)
{
...
next = tpm_read_counter(); // assume next is 0x10
next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e
now = tpm_read_counter(); // now is 0x10
...
return (int)(next - now) <= 0 ? -ETIME : 0;
^^^^^^^^^^
0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when
cast to int. So return -ETIME.
}
To fix this, introduce a 'prev' variable and check if 'now - prev' is
larger than delta.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
GCC's named address space checks errors out with:
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’:
drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of
‘free_percpu_irq’ from pointer to non-enclosed address space
29 | free_percpu_irq(of_irq->irq, clkevt);
| ^~~~~~
In file included from drivers/clocksource/timer-of.c:8:
./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
201 | extern void free_percpu_irq(unsigned int, void __percpu *);
| ^~~~~~~~~~~~~~~
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’:
drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of
‘request_percpu_irq’ from pointer to non-enclosed address space
74 | np->full_name, clkevt) :
| ^~~~~~
./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
190 | const char *devname, void __percpu *percpu_dev_id)
Sparse warns about:
timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces)
timer-of.c:29:46: expected void [noderef] __percpu *
timer-of.c:29:46: got struct clock_event_device *clkevt
timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces)
timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id
timer-of.c:74:51: got struct clock_event_device *clkevt
It appears the code is incorrect as reported by Uros Bizjak:
"The referred code is questionable as it tries to reuse
the clkevent pointer once as percpu pointer and once as generic
pointer, which should be avoided."
This change removes the percpu related code as no drivers is using it.
[Daniel: Fixed the description]
Fixes: dc11bae785 ("clocksource/drivers: Add timer-of common init routine")
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
According to the data sheet, writing the MODE register should stop the
counter (and thus the interrupts). This appears to work on real hardware,
at least modern Intel and AMD systems. It should also work on Hyper-V.
However, on some buggy virtual machines the mode change doesn't have any
effect until the counter is subsequently loaded (or perhaps when the IRQ
next fires).
So, set MODE 0 and then load the counter, to ensure that those buggy VMs
do the right thing and the interrupts stop. And then write MODE 0 *again*
to stop the counter on compliant implementations too.
Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero
when it should only happen once, but the second MODE write stops that too.
Userspace test program (mostly written by tglx):
=====
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdint.h>
#include <sys/io.h>
static __always_inline void __out##bwl(type value, uint16_t port) \
{ \
asm volatile("out" #bwl " %" #bw "0, %w1" \
: : "a"(value), "Nd"(port)); \
} \
\
static __always_inline type __in##bwl(uint16_t port) \
{ \
type value; \
asm volatile("in" #bwl " %w1, %" #bw "0" \
: "=a"(value) : "Nd"(port)); \
return value; \
}
BUILDIO(b, b, uint8_t)
#define inb __inb
#define outb __outb
#define PIT_MODE 0x43
#define PIT_CH0 0x40
#define PIT_CH2 0x42
static int is8254;
static void dump_pit(void)
{
if (is8254) {
// Latch and output counter and status
outb(0xC2, PIT_MODE);
printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0));
} else {
// Latch and output counter
outb(0x0, PIT_MODE);
printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0));
}
}
int main(int argc, char* argv[])
{
int nr_counts = 2;
if (argc > 1)
nr_counts = atoi(argv[1]);
if (argc > 2)
is8254 = 1;
if (ioperm(0x40, 4, 1) != 0)
return 1;
dump_pit();
printf("Set oneshot\n");
outb(0x38, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
printf("Set periodic\n");
outb(0x34, PIT_MODE);
outb(0x00, PIT_CH0);
outb(0x0F, PIT_CH0);
dump_pit();
usleep(1000);
dump_pit();
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set stop (%d counter writes)\n", nr_counts);
outb(0x30, PIT_MODE);
while (nr_counts--)
outb(0xFF, PIT_CH0);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
printf("Set MODE 0\n");
outb(0x30, PIT_MODE);
dump_pit();
usleep(100000);
dump_pit();
usleep(100000);
dump_pit();
return 0;
}
=====
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org
Leaving the PIT interrupt running can cause noticeable steal time for
virtual guests. The VMM generally has a timer which toggles the IRQ input
to the PIC and I/O APIC, which takes CPU time away from the guest. Even
on real hardware, running the counter may use power needlessly (albeit
not much).
Make sure it's turned off if it isn't going to be used.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-1-dwmw2@infradead.org
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The timer/counter block on the Realtek SoCs provides up to 5 timers. It
also includes a watchdog timer which is handled by the
realtek_otto_wdt.c driver.
One timer will be used per CPU as a local clock event generator. An
additional timer will be used as an overal stable clocksource.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240710043524.1535151-8-chris.packham@alliedtelesis.co.nz
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Counter width of GIC is configurable and can be read from a
register.
Use width value from the register for sched_clock.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240612-mips-clks-v2-7-a57e6f49f3db@flygoat.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Linus Torvalds
Oliver Upton
Alexandre Ghiti
Nick Hu
Alexandre Torgue
Anindya Sundar Gayen
Fabrice Gasnier
Shameer Kolothum
Nuno Das Neves
Paul Burton
Artur Rojek
Naman Jain
Rob Herring (Arm)
Tang Bin
Javier Carrasco
Sergio Paracuellos
Judith Mendez
Mark Brown
Dr. David Alan Gilbert
Frederic Weisbecker
Thomas Gleixner
Uros Bizjak
Gaosheng Cui
Ankit Agrawal
Huan Yang
Marek Maslanka
Zhang Zekun
Jacky Bai
Daniel Lezcano
David Woodhouse
Luca Ceresoli
Chris Packham
Jiaxun Yang