mirror of https://github.com/torvalds/linux.git
463 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tomas Henzl
|
565d065acd |
ata: ahci: simplify init function
This patch moves all the IRQ vector allocations into a single function. Instead of having the allocations spread out over two separate call sites everything will be handled in ahci_init_irq. Also a direct call into pci(m)_intx will be removed. The main part of this change is done by adding a PCI_IRQ_INTX flag into an already existing pci_alloc_irq_vectors invocation. In the current implementation of the pci_alloc_irq_vectors is the sequence of calls msi-x -> msi -> legacy irq and whatever there succeeds stops the call chain. That makes it impossible to merge all instances into as a single call to pci_alloc_irq_vectors since the order of calls there is: multiple msi-x a single msi a single msi-x a legacy irq. The two last steps can be merged into a single one which are the msi-x and legacy irq option. When PCI_IRQ_INTX flag is set the pci_alloc_irq_vectors succeeds in almost all cases - that makes it possible to convert ahci_init_irq(msi) into a void function. The exception is when dev->irq is zero then the pci_alloc_irq_vectors may return with an error code also pci_intx isn't called from pci_alloc_irq_vectors and thus certain pci calls aren't performed. That's just a negligible issue as later in ahci_init_one the (zero) value of dev->irq is via pci_irq_vector assigned to hpriv->irq. That value is then later tested in ahci_host_activate->ata_host_activate where it is welcomed with a WARN_ON message and fails with setting up irq and then the probe function (ahci_init_one) fails. The special zero value's meaning is that polling mode is being be set up which isn't the case. No functional change. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20250319155030.16410-1-thenzl@redhat.com Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
Huacai Chen
|
0507c777f5 |
ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
We use CD/DVD drives under Marvell 88SE9215 SATA controller on many Loongson-based machines. We found its PIO doesn't work well, and on the opposite its DMA seems work very well. We don't know the detail of the 88SE9215 SATA controller, but we have tested different CD/DVD drives and they all have problems under 88SE9215 (but they all work well under an Intel SATA controller). So, we consider this problem is bound to 88SE9215 SATA controller rather than bound to CD/DVD drives. As a solution, we define a new dedicated AHCI board id which is named board_ahci_yes_fbs_atapi_dma for 88SE9215, and for this id we set the AHCI_HFLAG_ATAPI_DMA_QUIRK and ATA_QUIRK_ATAPI_MOD16_DMA flags on the SATA controller in order to prefer ATAPI DMA. Reported-by: Yuli Wang <wangyuli@uniontech.com> Tested-by: Jie Fan <fanjie@uniontech.com> Tested-by: Erpeng Xu <xuerpeng@uniontech.com> Tested-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250318104314.2160526-1-chenhuacai@loongson.cn Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
Daniel Kral
|
885251dc35 |
ahci: add PCI ID for Marvell 88SE9215 SATA Controller
Add support for Marvell Technology Group Ltd. 88SE9215 SATA 6 Gb/s controller, which is e.g. used in the DAWICONTROL DC-614e RAID bus controller and was not automatically recognized before. Tested with a DAWICONTROL DC-614e RAID bus controller. Signed-off-by: Daniel Kral <d.kral@proxmox.com> Link: https://lore.kernel.org/r/20250304092030.37108-1-d.kral@proxmox.com Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
Philipp Stanner
|
eeda4c86d8 |
ata: Use always-managed version of pci_intx()
pci_intx() is a hybrid function which can sometimes be managed through devres. To remove this hybrid nature from pci_intx(), it is necessary to port users to either an always-managed or a never-managed version. All users in ata enable their PCI devices with pcim_enable_device(). Thus, they need the always-managed version. Replace pci_intx() with pcim_intx(). Link: https://lore.kernel.org/r/20241209130632.132074-10-pstanner@redhat.com Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Niklas Cassel <cassel@kernel.org> |
|
Linus Torvalds
|
1746db26f8 |
pci-v6.13-changes
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
|
|
Philipp Stanner
|
bdcddd0cdc |
ata: ahci: Replace deprecated PCI functions
pcim_iomap_regions_request_all() and pcim_iomap_table() have been
deprecated by the PCI subsystem in commit
|
|
Yan Zhen
|
794007a8c8 |
ata: Fix typos in the comment
Correctly spelled comments make it easier for the reader to understand the code. Fix typos: 'multipe' ==> 'multiple', 'Paremeters' ==> 'Parameters', 'recieved' ==> 'received', 'realted' ==> 'related', 'evaulated' ==> 'evaluated', 'programing' ==> 'programming', 'coninue' ==> 'continue'. Signed-off-by: Yan Zhen <yanzhen@vivo.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240927060056.221977-1-yanzhen@vivo.com Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
Damien Le Moal
|
ca8040b071 |
ata: ahci: Rephrase comment to not use the term blacklist
Rephrase the comment for the eMachines entry in the sysids array of ahci_broken_suspend() to not use the term blacklist. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> |
|
Niklas Cassel
|
f97106b10d |
ata: ahci: Add debug print for external port
Add a debug print that tells us if LPM is not getting enabled because the port is external. Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240703184418.723066-20-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
eeb25a09c5 |
ata: ahci: Clean up sysfs file on error
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes:
|
|
|
Niklas Cassel
|
fa997b0576 |
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
LPM consists of HIPM (host initiated power management) and DIPM
(device initiated power management).
ata_eh_set_lpm() will only enable HIPM if both the HBA and the device
supports it.
However, DIPM will be enabled as long as the device supports it.
The HBA will later reject the device's request to enter a power state
that it does not support (Slumber/Partial/DevSleep) (DevSleep is never
initiated by the device).
For a HBA that doesn't support any LPM states, simply don't set a LPM
policy such that all the HIPM/DIPM probing/enabling will be skipped.
Not enabling HIPM or DIPM in the first place is safer than relying on
the device following the AHCI specification and respecting the NAK.
(There are comments in the code that some devices misbehave when
receiving a NAK.)
Performing this check in ahci_update_initial_lpm_policy() also has the
advantage that a HBA that doesn't support any LPM states will take the
exact same code paths as a port that is external/hot plug capable.
Side note: the port in ata_port_dbg() has not been given a unique id yet,
but this is not overly important as the debug print is disabled unless
explicitly enabled using dynamic debug. A follow-up series will make sure
that the unique id assignment will be done earlier. For now, the important
thing is that the function returns before setting the LPM policy.
Fixes:
|
|
Jason Nader
|
9e2f46cd87 |
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
Commit |
|
|
Damien Le Moal
|
24cfd86433 |
ata: ahci: Add mask_port_map module parameter
Commits |
|
Conrad Kostecki
|
6cd8adc3e1 |
ahci: asm1064: asm1166: don't limit reported ports
Previously, patches have been added to limit the reported count of SATA ports for asm1064 and asm1166 SATA controllers, as those controllers do report more ports than physically having. While it is allowed to report more ports than physically having in CAP.NP, it is not allowed to report more ports than physically having in the PI (Ports Implemented) register, which is what these HBAs do. (This is a AHCI spec violation.) Unfortunately, it seems that the PMP implementation in these ASMedia HBAs is also violating the AHCI and SATA-IO PMP specification. What these HBAs do is that they do not report that they support PMP (CAP.SPM (Supports Port Multiplier) is not set). Instead, they have decided to add extra "virtual" ports in the PI register that is used if a port multiplier is connected to any of the physical ports of the HBA. Enumerating the devices behind the PMP as specified in the AHCI and SATA-IO specifications, by using PMP READ and PMP WRITE commands to the physical ports of the HBA is not possible, you have to use the "virtual" ports. This is of course bad, because this gives us no way to detect the device and vendor ID of the PMP actually connected to the HBA, which means that we can not apply the proper PMP quirks for the PMP that is connected to the HBA. Limiting the port map will thus stop these controllers from working with SATA Port Multipliers. This patch reverts both patches for asm1064 and asm1166, so old behavior is restored and SATA PMP will work again, but it will also reintroduce the (minutes long) extra boot time for the ASMedia controllers that do not have a PMP connected (either on the PCIe card itself, or an external PMP). However, a longer boot time for some, is the lesser evil compared to some other users not being able to detect their drives at all. Fixes: |
|
|
Linus Torvalds
|
57aaf9134c |
ata changes for 6.9-rc1
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled. (from me)
- Drop the board type board_ahci_low_power. Now when we make sure that we
won't enable LPM for external ports, we can always set the LPM policy to
CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is thus no
longer any need for the board type board_ahci_low_power, so it can be
removed. (As before, LPM features not supported by the HBA and/or the
device will not be enabled, regardless of the LPM policy Kconfig.)
(from Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we will
wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel platforms
use it. The Intel PCS quirk was being applied to basically all Intel
platforms, which caused some issues (the device failing to come back
after a reset), when being applied to newer Intel platforms where it
shouldn't have been applied. Add board type board_ahci_pcs_quirk and
make legacy Intel platforms use it. New platforms can be added using
board type board_ahci (which will not have the quirk applied).
(from me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more clearly
highlight that it applies two different quirks. (from me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk). (from me)
- Drop unused board_ahci_noncq board type. (from me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types. (from me)
- Make pata_parport_bus_type const. (from Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not used
by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema.
(from Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing the
maximum number of ports supported by the HBA silicon. (from me)
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZe70AhIcY2Fzc2VsQGtl
cm5lbC5vcmcACgkQyWQxo5nGTXJfQQD/TjC4nEAWRiV3qz0iqyXt89T7DZUGP7aP
AZDxv2ST0rAA/j2VK6G1VHoxxN3fghfCF+D8zCzZ8w/gsOqjKMvbIEoI
=sNec
-----END PGP SIGNATURE-----
Merge tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled (me)
- Drop the board type board_ahci_low_power. Now when we make sure that
we won't enable LPM for external ports, we can always set the LPM
policy to CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is
thus no longer any need for the board type board_ahci_low_power, so
it can be removed. (As before, LPM features not supported by the HBA
and/or the device will not be enabled, regardless of the LPM policy
Kconfig) (Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we
will wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel
platforms use it. The Intel PCS quirk was being applied to basically
all Intel platforms, which caused some issues (the device failing to
come back after a reset), when being applied to newer Intel platforms
where it shouldn't have been applied.
New platforms can be added using board type board_ahci, which will
not have the quirk applied (me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more
clearly highlight that it applies two different quirks (me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk) (me)
- Drop unused board_ahci_noncq board type (me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types (me)
- Make pata_parport_bus_type const (Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not
used by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema (Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing
the maximum number of ports supported by the HBA silicon (me)
* tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: print the number of implemented ports
dt-bindings: ata: convert MediaTek controller to the json-schema
ahci: rename board_ahci_nomsi
ahci: drop unused board_ahci_noncq
ahci: clean up ahci_broken_devslp quirk
ahci: rename board_ahci_nosntf
ahci: clean up intel_pcs_quirk
ata: ahci: Drop low power policy board type
ata: ahci: do not enable LPM on external ports
ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy()
ata: ahci: a hotplug capable port is an external port
ata: ahci: move marking of external port earlier
dt-bindings: ata: atmel: remove at91 compact flash documentation
ata: pata_parport: make pata_parport_bus_type const
|
|
Andrey Jr. Melnikov
|
9815e39617 |
ahci: asm1064: correct count of reported ports
The ASM1064 SATA host controller always reports wrongly, that it has 24 ports. But in reality, it only has four ports. before: ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst after: ahci 0000:04:00.0: ASM1064 has only four ports ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst Signed-off-by: "Andrey Jr. Melnikov" <temnota.am@gmail.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
8731215112 |
ahci: rename board_ahci_nomsi
The naming format of the board_ahci_no* boards are: board_ahci_no_debounce_delay board_ahci_pcs_quirk_no_devslp board_ahci_pcs_quirk_no_sntf Rename board_ahci_nomsi to board_ahci_no_msi to match the other boards. Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
8d6cfedec1 |
ahci: drop unused board_ahci_noncq
Since commit
|
|
|
Niklas Cassel
|
bf6f1581d1 |
ahci: clean up ahci_broken_devslp quirk
Most quirks are applied using a specific board type board_ahci_no* (e.g. board_ahci_nomsi, board_ahci_noncq), which then sets a flag representing the specific quirk. ahci_pci_tbl (which is the table of all supported PCI devices), then uses that board type for the PCI vendor and device IDs which need to be quirked. The ahci_broken_devslp quirk is not implemented in this standard way. Modify the ahci_broken_devslp quirk to be implemented like the other quirks. This way, we will not have the same PCI device and vendor ID scattered over ahci.c. It will simply be defined in a single location. Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
f2b70a264b |
ahci: rename board_ahci_nosntf
Commit |
|
|
Niklas Cassel
|
7edbb60592 |
ahci: clean up intel_pcs_quirk
The comment in front of board_ahci_pcs7 is completely wrong. It claims that board_ahci_pcs7 is needing the quirk, but in fact, the logic implemented in ahci_intel_pcs_quirk() is the exact opposite, only board_ahci_pcs7 is _excluded_ from the quirk. This way of implementing a quirk is unconventional in several ways: First of all because it has a board ID for which the quirk should _not_ be applied (board_ahci_pcs7), instead of the usual way where we have a board ID for which the quirk should be applied. The second reason is that other than only excluding board_ahci_pcs7 from the quirk, PCI devices that make use of the generic entry in ahci_pci_tbl (which matches on AHCI class code) are also excluded. This can of course lead to very subtle breakage, and did indeed do so in: commit |
|
Mario Limonciello
|
7627a0edef |
ata: ahci: Drop low power policy board type
The low power policy board type was introduced to allow systems to get into deep states reliably. Before it was introduced `min_power` was causing problems for a number of drives. New power policies `min_power_with_partial` and `med_power_with_dipm` have been introduced which provide a more stable baseline for systems. Tested-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Jian-Hong Pan <jhp@endlessos.org> Acked-by: Jian-Hong Pan <jhp@endlessos.org> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> [cassel: rebase patch and fix trivial conflicts] Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
ae1f3db006 |
ata: ahci: do not enable LPM on external ports
AHCI 1.3.3, 7.3.1.1 Software Flow for Hot Plug Removal Detection states: "To reliably detect hot plug removals, software must disable interface power management. Software should perform the following initialization on a port after a device is attached: -Set PxSCTL.IPM to 3h to disable interface power management state transitions. -Set PxCMD.ALPE to ‘0’ to disable aggressive power management. -Ensure PxIE.PRCE is set to ‘1’ to enable interrupts on hot plug removals. -Disable device initiated interface power management by issuing the appropriate SET FEATURES command." Further, AHCI 1.3.3, 7.3 Native Hot Plug Support states: "The HBA shall set the PxSERR.DIAG.X bit to ‘1’ when a COMINIT is received from the device. Hot plug insertions are detected via the PxIS.PCS bit that directly reflects the PxSERR.DIAG.X bit. The HBA shall set the PxSERR.DIAG.N bit to ‘1’ when the HBA’s internal PhyRdy signal changes state. Hot plug removals are detected via the PxIS.PRCS bit that directly reflects the PxSERR.DIAG.N bit. Note that PxSERR.DIAG.N is also set to ‘1’ on insertions and during interface power management entry/exit." ahci_set_lpm() already disables the PxIS.PRCS interrupt if setting a LPM policy != ATA_LPM_MAX_POWER, so we cannot detect hot plug removals when LPM policy != ATA_LPM_MAX_POWER. We do have PxIS.PCS interrupt enabled even for LPM policy != ATA_LPM_MAX_POWER, so we should theoretically still be able to detect hot plug insertions even when LPM is enabled. However, in practise, for LPM policy ATA_LPM_MED_POWER_WITH_DIPM, ATA_LPM_MIN_POWER_WITH_PARTIAL, and ATA_LPM_MIN_POWER, if there is no link enabled, sata_link_scr_lpm() will set SControl.DET = 0x4, which will transition the port to the "P:Offline" state. The P:Offline mode is described in SATA Gold 3.5a: 4.1.1.103 Phy offline: "In this mode the host Phy is forced off and the host Phy does not recognize nor respond to COMINIT or COMWAKE. This mode is entered by setting the DET field of the SControl register to 0100b. This is a mechanism for the host to turn off its Phy." So in the P:Offline state the PHY does not recognize the unsolicited COMINIT which is sent on a hot plug insertion. While we could change sata_link_scr_lpm() to never power off an external port for LPM policy != ATA_LPM_MAX_POWER (in order be able to handle hot plug insertions), we still would not be able to handle hot plug removals. Thus, simply modify ahci_update_initial_lpm_policy() to not enable LPM if the port advertises itself as an external port, as this function is already being used to set/override the initial LPM policy. Tested-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Jian-Hong Pan <jhp@endlessos.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
04d5fb7fbc |
ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy()
There is no need for ahci_update_initial_lpm_policy() to take hpriv as a parameter, it can easily be derived from the ata_port. Tested-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Jian-Hong Pan <jhp@endlessos.org> Acked-by: Jian-Hong Pan <jhp@endlessos.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
45b96d65ec |
ata: ahci: a hotplug capable port is an external port
A hotplug capable port is an external port, so mark it as such. We even say this ourselves in libata-scsi.c: /* set scsi removable (RMB) bit per ata bit, or if the * AHCI port says it's external (Hotplug-capable, eSATA). */ This also matches the terminology used in AHCI 1.3.1 (the keyword to search for is "externally accessible"). Tested-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Jian-Hong Pan <jhp@endlessos.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
|
Niklas Cassel
|
f713193523 |
ata: ahci: move marking of external port earlier
Move the marking of an external port earlier in the call chain. This is needed for further cleanups. No functional change intended. Tested-by: Damien Le Moal <dlemoal@kernel.org> Tested-by: Jian-Hong Pan <jhp@endlessos.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
Lennert Buytenhek
|
51af8f255b |
ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts
ASMedia have confirmed that all ASM106x parts currently listed in
ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran
into on the ASM1061, and therefore, we need to apply the quirk added by
commit
|
|
|
Lennert Buytenhek
|
20730e9b27 |
ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an
ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was
observed that was immediately preceded by the following kernel
messages:
ahci 0000:28:00.0: Using 64-bit DMA addresses
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00000 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00300 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00380 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00400 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00680 flags=0x0000]
ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00700 flags=0x0000]
The first message is produced by code in drivers/iommu/dma-iommu.c
which is accompanied by the following comment that seems to apply:
/*
* Try to use all the 32-bit PCI addresses first. The original SAC vs.
* DAC reasoning loses relevance with PCIe, but enough hardware and
* firmware bugs are still lurking out there that it's safest not to
* venture into the 64-bit space until necessary.
*
* If your device goes wrong after seeing the notice then likely either
* its driver is not setting DMA masks accurately, the hardware has
* some inherent bug in handling >32-bit addresses, or not all the
* expected address bits are wired up between the device and the IOMMU.
*/
Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual
address 0xffffffff00000000 produces the following I/O page faults:
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000000 flags=0x0010]
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000500 flags=0x0010]
Note that the upper 21 bits of the logged DMA address are zero. (When
asking a different PCIe device in the same PCIe slot to DMA to the
same I/O virtual address, we do see all the upper 32 bits of the DMA
address as 1, so this is not an issue with the chipset or IOMMU
configuration on the test system.)
Also, hacking libahci to always set the upper 21 bits of all DMA
addresses to 1 produces no discernible effect on the behavior of the
ASM1061, and mkfs/mount/scrub/etc work as without this hack.
This all strongly suggests that the ASM1061 has a 43 bit DMA address
limit, and this commit therefore adds a quirk to deal with this limit.
This issue probably applies to (some of) the other supported ASMedia
parts as well, but we limit it to the PCI IDs known to refer to
ASM1061 parts, as that's the only part we know for sure to be affected
by this issue at this point.
Link: https://lore.kernel.org/linux-ide/ZaZ2PIpEId-rl6jv@wantstofly.org/
Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org>
[cassel: drop date from error messages in commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
|
Conrad Kostecki
|
0077a504e1 |
ahci: asm1166: correct count of reported ports
The ASM1166 SATA host controller always reports wrongly, that it has 32 ports. But in reality, it only has six ports. This seems to be a hardware issue, as all tested ASM1166 SATA host controllers reports such high count of ports. Example output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode. By adjusting the port_map, the count is limited to six ports. New output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0x3f impl SATA mode. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=211873 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218346 Signed-off-by: Conrad Kostecki <conikost@gentoo.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> |
|
Mika Westerberg
|
b8b8b4e0c0 |
ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
Intel Alder Lake-P AHCI controller needs to be added to the mobile chipsets list in order to have link power management enabled. Without this the CPU cannot enter lower power C-states making idle power consumption high. Cc: Koba Ko <koba.ko@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> |
|
Szuying Chen
|
3bf6141060 |
ata: ahci: add identifiers for ASM2116 series adapters
Add support for PCIe SATA adapter cards based on Asmedia 2116 controllers. These cards can provide up to 10 SATA ports on PCIe card. Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> |
|
Niklas Cassel
|
24e0e61db3 |
ata: libata: disallow dev-initiated LPM transitions to unsupported states
In AHCI 1.3.1, the register description for CAP.SSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Slumber state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Slumber requests."
In AHCI 1.3.1, the register description for CAP.PSC:
"When cleared to ‘0’, software must not allow the HBA to initiate
transitions to the Partial state via agressive link power management nor
the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port
must be programmed to disallow device initiated Partial requests."
Ensure that we always set the corresponding bits in PxSCTL.IPM, such that
a device is not allowed to initiate transitions to power states which are
unsupported by the HBA.
DevSleep is always initiated by the HBA, however, for completeness, set the
corresponding bit in PxSCTL.IPM such that agressive link power management
cannot transition to DevSleep if DevSleep is not supported.
sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp.
However, only libahci has the ability to read the CAP/CAP2 register to see
if these features are supported. Therefore, in order to not introduce any
regressions on ata_piix or libata-pmp, create flags that indicate that the
respective feature is NOT supported. This way, the behavior for ata_piix
and libata-pmp should remain unchanged.
This change is based on a patch originally submitted by Runa Guo-oc.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Fixes:
|
|
Werner Fischer
|
2a2df98ec5 |
ata: ahci: Add Elkhart Lake AHCI controller
Elkhart Lake is the successor of Apollo Lake and Gemini Lake. These CPUs and their PCHs are used in mobile and embedded environments. With this patch I suggest that Elkhart Lake SATA controllers [1] should use the default LPM policy for mobile chipsets. The disadvantage of missing hot-plug support with this setting should not be an issue, as those CPUs are used in embedded environments and not in servers with hot-plug backplanes. We discovered that the Elkhart Lake SATA controllers have been missing in ahci.c after a customer reported the throttling of his SATA SSD after a short period of higher I/O. We determined the high temperature of the SSD controller in idle mode as the root cause for that. Depending on the used SSD, we have seen up to 1.8 Watt lower system idle power usage and up to 30°C lower SSD controller temperatures in our tests, when we set med_power_with_dipm manually. I have provided a table showing seven different SATA SSDs from ATP, Intel/Solidigm and Samsung [2]. Intel lists a total of 3 SATA controller IDs (4B60, 4B62, 4B63) in [1] for those mobile PCHs. This commit just adds 0x4b63 as I do not have test systems with 0x4b60 and 0x4b62 SATA controllers. I have tested this patch with a system which uses 0x4b63 as SATA controller. [1] https://sata-io.org/product/8803 [2] https://www.thomas-krenn.com/en/wiki/SATA_Link_Power_Management#Example_LES_v4 Signed-off-by: Werner Fischer <devlists@wefi.net> Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> |
|
Sergey Shtylyov
|
d14d41cc5a |
ata: fix debounce timings type
sata_deb_timing_{hotplug|long|normal}[] store 'unsigned long' debounce
timeouts in ms, while sata_link_debounce() eventually uses those timeouts
by calling ata_{deadline|msleep}( which take just 'unsigned int'. Change
the debounce timeout table element's type to 'unsigned int' -- all these
timeouts happily fit into 'unsigned int'...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Bart Van Assche
|
25df73d933 |
scsi: ata: Declare SCSI host templates const
Make it explicit that ATA host templates are not modified. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> (for DWC AHCI SATA) Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> (for Tegra) Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
Damien Le Moal
|
6210038aea |
ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"
Commit
|
|
Simon Gaiser
|
104ff59af7 |
ata: ahci: Add Tiger Lake UP{3,4} AHCI controller
Mark the Tiger Lake UP{3,4} AHCI controller as "low_power". This enables
S0ix to work out of the box. Otherwise this isn't working unless the
user manually sets /sys/class/scsi_host/*/link_power_management_policy.
Intel lists a total of 4 SATA controller IDs in [1] for those mobile
PCHs. This commit just adds the "AHCI" variant since I only tested
those.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/631119
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Adam Vodopjan
|
37e14e4f37 |
ata: ahci: Fix PCS quirk application for suspend
Since kernel 5.3.4 my laptop (ICH8M controller) does not see Kingston SV300S37A60G SSD disk connected into a SATA connector on wake from suspend. The problem was introduced in |
|
Thomas Gleixner
|
6c57e74e6e |
ata: ahci: Remove linux/msi.h include
Nothing in this file needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: linux-ide@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
Serge Semin
|
7cbbfbe01a |
ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments
The port base address may be required even before the ata_host instance is initialized and activated, for instance in the ahci_save_initial_config() method which we are about to update (consider this modification as a preparation for that one). Seeing the __ahci_port_base() function isn't used much it's the best candidate to provide the required functionality. So let's convert it to accepting the ahci_host_priv structure pointer. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
|
Serge Semin
|
88589772e8 |
ata: libahci: Discard redundant force_port_map parameter
Currently there are four port-map-related fields declared in the ahci_host_priv structure and used to setup the HBA ports mapping. First the ports-mapping is read from the PI register and immediately stored in the saved_port_map field. If forced_port_map is initialized with non-zero value then its value will have greater priority over the value read from PI, thus it will override the saved_port_map field. That value will be then masked by a non-zero mask_port_map field and after some sanity checks it will be stored in the ahci_host_priv.port_map field as a final port mapping. As you can see the logic is a bit too complicated for such a simple task. We can freely get rid from at least one of the fields with no change to the implemented semantic. The force_port_map field can be replaced with taking non-zero saved_port_map value into account. So if saved_port_map is pre-initialized by the low level drivers (platform drivers) then it will have greater priority over the value read from PI register and will be used as actual HBA ports mapping later on. Thus the ports map forcing task will be just transferred from force_port_map to the saved_port_map field. This modification will perfectly fit into the feature of having OF-based initialization of the HW-init HBA CSR fields we are about to introduce in the next commit. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
Rafael J. Wysocki
|
fee6073051 |
ata: ahci: Do not check ACPI_FADT_LOW_POWER_S0
The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to use low-power S0 idle on the given platform than S3 (provided that the latter is supported) and it doesn't preclude using either of them (which of them will be used depends on the choices made by user space). For this reason, there is no benefit from checking that flag in ahci_update_initial_lpm_policy(). First off, it cannot be a bug to do S3 with policy set to either ATA_LPM_MIN_POWER_WITH_PARTIAL or ATA_LPM_MIN_POWER, because S3 can be used on systems with ACPI_FADT_LOW_POWER_S0 set and it must work if really supported, so the ACPI_FADT_LOW_POWER_S0 check is not needed to protect the S3-capable systems from failing. Second, suspend-to-idle can be carried out on a system with ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting policy to either ATA_LPM_MIN_POWER_WITH_PARTIAL or ATA_LPM_MIN_POWER is needed to handle that case correctly, it should be done regardless of the ACPI_FADT_LOW_POWER_S0 value. Accordingly, replace the ACPI_FADT_LOW_POWER_S0 check in ahci_update_initial_lpm_policy() with pm_suspend_default_s2idle() which is more general and also takes the user's preference into account and drop the CONFIG_ACPI #ifdef around it that is not necessary any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
Dan Williams
|
5716fb0d40 |
ahci: Add a generic 'controller2' RAID id
Intel server platforms that support 'RAID', i.e. have platform firmware support for software-RAID metadata + features that the kernel also understands, maintain the same device-ids for RAID from generation to generation. This is in contrast to client platforms that have tended to roll new device-ids every platform generation. However, even though server platform keep the ids there are still unique device-ids per controller instance. To date there have only been 2 controllers on these platforms, but platforms code named Emmitsburg add a third controller. Add the device-id for this third controller and collect it with the other generic server RAID ids. As mentioned here [1], the pain of continuing add new and different device-ids for RAID mode to this file [2] has been heard. Ideally this device-id would not matter and the class code would remain PCI_CLASS_STORAGE_SATA_AHCI regardless of the RAID mode, but other operating systems depend on the class code *not* being AHCI when the device is in RAID mode. That said, going forward there is little reason for new server RAID ids to be added as they can simply reuse one of the existing ids even for a new controller. Server software RAID features continue to be supported on Linux. Client software RAID features continue to be not supported and the recommendation there remains to set the device to AHCI mode in platform firmware. Link: https://lore.kernel.org/all/8e61fb0104422e8d70701e2ddc7b1ca53f009797.camel@intel.com [1] Link: https://lore.kernel.org/all/20201119165022.GA3582@infradead.org/ [2] Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
|
Mario Limonciello
|
55b014159e |
ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item back
CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in
commit
|
|
|
Mario Limonciello
|
4dd4d3deb5 |
ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item
`CONFIG_SATA_LPM_MOBILE_POLICY` reflects a configuration to apply only to mobile chipsets. As some desktop boards may want to use this policy by default as well, rename the configuration item to `SATA_LPM_POLICY`. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
|
Mario Limonciello
|
e5c894791e |
ata: ahci: Rename `AHCI_HFLAG_IS_MOBILE`
`AHCI_HFLAG_IS_MOBILE` designates that a chipset should be using the default link power management policy from a kernel configuration item. As desktop chipsets may also be interested in this default policy configuration, rename the flag to `AHCI_HFLAG_USE_LPM_POLICY` to more accurately reflect that a chipset doesn't have to be mobile to adopt it. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
|
Mario Limonciello
|
099849af27 |
ata: ahci: Rename board_ahci_mobile
This board definition was originally created for mobile devices to designate default link power managmeent policy to influence runtime power consumption. As this is interesting for more than just mobile designs, rename the board to `board_ahci_low_power` to make it clear it is about default policy. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
|
Sergey Shtylyov
|
efcef265fd |
ata: add/use ata_taskfile::{error|status} fields
Add the explicit error and status register fields to 'struct ata_taskfile'
using the anonymous *union*s ('struct ide_taskfile' had that for ages!) and
update the libata taskfile code accordingly. There should be no object code
changes resulting from that...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
|
Sergey Shtylyov
|
ec87cf3782 |
ata: libata: make ata_host_suspend() *void*
ata_host_suspend() always returns 0, so the result checks in many drivers look pointless. Let's make this function return *void* instead of *int*. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> |
|
Paul Menzel
|
f4a8d4f2b6 |
ata: ahci: Skip 200 ms debounce delay for Marvell 88SE9235
The 200 ms delay before debouncing the PHY in `sata_link_resume()` is
not needed for the Marvell 88SE9235.
$ lspci -nn -s 0021:0e:00.0
0021:0e:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11)
So, remove it using the board_ahci_no_debounce_delay board definition.
Tested on IBM S822LC with current Linux 5.17-rc1:
Currently, without this patch (with 200 ms delay), device probe for ata1
takes 485 ms:
[ 3.358158] ata1: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000100 irq 39
[ 3.358175] ata2: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000180 irq 39
[ 3.358191] ata3: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000200 irq 39
[ 3.358207] ata4: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3fe881000280 irq 39
[…]
[ 3.677542] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.677719] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.839242] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.839828] ata2.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133
[ 3.840029] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 3.841796] ata2.00: configured for UDMA/133
[ 3.843231] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.844083] ata1.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133
[ 3.844313] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 3.846043] ata1.00: configured for UDMA/133
With this patch (no delay) device probe for ata1 takes 273 ms:
[ 3.624259] ata1: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000100 irq 39
[ 3.624436] ata2: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000180 irq 39
[ 3.624452] ata3: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000200 irq 39
[ 3.624468] ata4: SATA max UDMA/133 abar m2048@0x3fe881000000 port 0x3f e881000280 irq 39
[…]
[ 3.731966] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.732069] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.897448] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.897678] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.898140] ata1.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133
[ 3.898175] ata2.00: ATA-10: ST1000NX0313 00LY266 00LY265IBM, BE33, max UDMA/133
[ 3.898287] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 3.898349] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 3.900070] ata1.00: configured for UDMA/133
[ 3.900166] ata2.00: configured for UDMA/133
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|