The adr is u64.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250204033134.92332-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The adr is u64.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250204033134.92332-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a match entry for using all the amps on a CDB35L56-EIGHT-C board
without the CS42L43 codec. Configuration is:
SDW0: 4x CS35L56 (OUT1, OUT2, OUT3, OUT4)
SDW1: 4x CS35L56 (OUT5, OUT6, OUT7, OUT8)
Speaker playback and amp feedback are aggregated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241216032721.131227-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a match for the CDB35L56-EIGHT-C board with SmartCodec and
SmartAmp speakers aggregated.
The configuration is:
SDW0: CS35L56 x2 (SmartAmp) using OUT1 and OUT2
SDW1: CS35L56 x2 (SmartAmp) using OUT7 and OUT8
SDW3: CS42L43 (SmartJack, SmartMic, SmartAmp)
CS35L56 and CS42L43 Speaker playback is aggregated across all 3 buses.
The device addresses and reset arrangements of the EIGHT-C board are
quirky hence the use of non-contiguous outputs OUT1,2,7,8.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241216032721.131227-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds match entries for the eight CS35L56 amps on the Cirrus Logic
CDB35L56-EIGHT-C board. Speaker playback and amp feedback are aggregated
across all amps on both SoundWire buses.
The mapping of SoundWire addresses to AMPn numbers matches the actual
order of amps on the EIGHT-C board. The SoundWire unique ID is in reverse
order for amps 1..4 on these boards, and the amp resets are paired
1+8, 2+7, 3+6, 4+5.
This then makes the entries from cs35l56_sdw_eight_1_4_fb_adr and
cs35l56_sdw_eight_5_8_fb_adr match the way the amp resets are paired on
the EIGHT-C board.
[0] = 1 + 8
[1] = 2 + 7
[3] = 3 + 6
[4] = 4 + 5
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241216032721.131227-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Arrowlake for some coming cs42l43
laptops.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As there are many combinations these follow a naming scheme to make
the content of link structures clearer:
cs35l56_<controller link>_<l or r><unique instance id>_adr
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add rt713_vb on SoundWire link 2 and rt1320 on SoundWire link 1 and 3
configuration support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add rt713_vb on SoundWire link 2 and rt1320 on SoundWire link 1 and 3
configuration support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add rt712_vb on SDW link 2 and 1 rt1320 on SDW link 1 configuration
support.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241206075903.195730-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") changes the arguments for various module symbol macros
including some that we've aded new uses for. Merge the commit up to
avoid problems in -next.
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch splits the SoundWire capture DP into a separate DAI so that
it can be independently routed and/or aggregated. It also makes
corresponding changes to the SOF SoundWire machine driver.
The playback and capture over SoundWire are separate DPs so don't have to
route to the same place. They could also be aggregated differently - for
example the playback DP could be aggregated with a playback-only DAI on
a codec.
No production device currently uses the capture path and their topologies
do not connect it. So there is no need to change the machine driver match
table entries for these. They will simply drop the unused capture DAI.
There is one hookup used for a non-production development board that was
added by commit 05fe628428 ("ASoC: Intel: soc-acpi-intel-mtl-match: add
acpi match table for cdb35l56-eight-c") This is the only hookup using a
topology that connects the SoundWire DP for capture, so this hookup has
been changed to include an aggregated endpoint for the capture DAI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241203104534.56719-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Realtek Gen6 AIOC supports rt712_vb on SoundWire link 2 and rt1320 on
SoundWire link 1.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241113064418.162592-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the rt722 multi-function codec and the
rt1320 amplifier in the ARL board configuration.
Link 0: RT722 codec with three endpoints: Headset, Speaker, and DMIC.
Link 2: RT1320 amplifier.
Note:
The Speaker endpoint on the RT722 codec is not used.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241028072631.15536-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a filter to skip the RT172 VB configuration if a SmartMic Function
is not found in the SDCA descriptors.
If the ACPI information is incorrect this can only be quirked further
with DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new match table entry on Lunarlake for the TM2 laptops
with rt713 and rt1318.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016030703.13669-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After removal of Skylake driver there is no users left for sst-dsp and
sst-ipc interfaces. Remove them.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20241009083419.319038-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Patch adds driver data & match table for rt721
multi-function codec on PTL-RVP at sdw link3.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241007075955.12575-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for rt5682 codec on SSP0 and
max98360a speaker amplifiers on SSP1 for PTL platform.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241004030135.67968-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added match table entry on mtl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241004030135.67968-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Fixes: 65ab45b906 ("ASoC: Intel: soc-acpi: Add match entries for some cs42l43 laptops")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241001061738.34854-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the ARL products which doesn't have
onboard I2S codec. But need to support HDMI-In capture via I2S and
audio playback through HDMI/DP monitor.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added match table entry on arl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240912120308.134762-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Fixes: f77ae7fcdc ("ASoC: Intel: soc-acpi-intel-mtl-match: add cs42l43 only support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20240906060224.2241212-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Fixes: dd3bd9dc47 ("ASoC: Intel: soc-acpi-intel-lnl-match: add cs42l43 only support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20240906060224.2241212-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Lunarlake for some coming cs42l43
laptops.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Alderlake for some coming cs42l43
laptops.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Arrowlake for some coming cs42l43
laptops.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in ARL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding ES83x6 codec support for ARL platforms and entry in match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move I2S mach's topology name fixup code to the end of machine driver
enumeration flow so HDA mach could also use same code to fixup its
topology file name as well. No functional change in this commit.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823074305.16873-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A spiritual successor to haswell/baytrail removal series [1].
The avs-driver found in sound/soc/intel/avs is a direct replacement to
the existing skylake-driver. It covers all features supported by it and
more and aligns with the recommended flows and requirements based on
Windows driver equivalent.
The skylake-driver related UAPI has been removed with "ASoC: Drop
soc-topology ABI v4 support" [2].
For the official kernel tree the deprecation begun with v6.0. Most
skylake-drivers users moved to avs- or SOF-driver when AudioDSP
capabilities are available on the platform or to snd-hda-intel
(sound/pci/hda) when such capabilities are not.
For the supported trees the deprecation begun with v5.4 with v5.15 being
the first where the skylake-driver is disabled entirely.
All machine board drivers that consume this DSP driver have their
replacements present within sound/soc/intel/avs/boards/ directory.
[1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@intel.com/
[2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@intel.com/
Preparation step in the skylake-driver removal process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240814083929.1217319-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds match table for rt722 multiple function codec on link
0 and link3.
The topology does not internally refer to link0 or link3, so we can
simplify and use the same topology file name. We do need different
tables though.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240802124011.173820-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For now the tables are basic for mockup devices and headset codec support
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240802124011.173820-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
the Intel kbuild bot reports a link failure when IOSF_MBI is built-in
but the Merrifield driver is configured as a module. The
soc-intel-quirks.h is included for Merrifield platforms, but IOSF_MBI
is not selected for that platform.
ld.lld: error: undefined symbol: iosf_mbi_read
>>> referenced by atom.c
>>> sound/soc/sof/intel/atom.o:(atom_machine_select) in archive vmlinux.a
This patch forces the use of the fallback static inline when IOSF_MBI is not reachable.
Fixes: 536cfd2f37 ("ASoC: Intel: use common helpers to detect CPUs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407160704.zpdhJ8da-lkp@intel.com/
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240722083002.10800-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 8efcd48646 ("ASoC: Intel: sof_rt5682: use common module for
sof_card_private initialization") migrated the pin assignment in the
context struct up to soc-acpi-intel-ssp-common.c. This uses a lookup
table to see if a device has a amp/codec before assigning the pin. The
issue here arises when combination parts that serve both (with 2 ports)
are used.
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.3/adl_rt5682_def/SSP0-Codec'
CPU: 1 PID: 2079 Comm: udevd Tainted: G U 6.6.36-03391-g744739e00023 #1 3be1a2880a0970f65545a957db7d08ef4b3e2c0d
Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.552.0 05/07/2024
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
sysfs_warn_dup+0x5b/0x70
sysfs_create_dir_ns+0xb0/0x100
kobject_add_internal+0x133/0x3c0
kobject_add+0x66/0xb0
? device_add+0x65/0x780
device_add+0x164/0x780
snd_soc_add_pcm_runtimes+0x2fa/0x800
snd_soc_bind_card+0x35e/0xc20
devm_snd_soc_register_card+0x48/0x90
platform_probe+0x7b/0xb0
really_probe+0xf7/0x2a0
...
kobject: kobject_add_internal failed for SSP0-Codec with -EEXIST, don't try to register things with the same name in the same directory.
The issue is that the ALC5650 was only defined in the codec table and
not the amp table which left the pin unassigned but the dai link was
still created by the machine driver.
Also patch the suffix filename code for the topology to prevent double
suffix names as a result of this change.
Fixes: 8efcd48646 ("ASoC: Intel: sof_rt5682: use common module for sof_card_private initialization")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240716084012.299257-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi
Bard Liao
Richard Fitzgerald
Simon Trimmer
Mark Brown
Peter Zijlstra
Mac Chiang
Pierre-Louis Bossart
Derek Fang
Amadeusz Sławiński
Naveen Manohar
Dharageswari R
Balamurugan C
Charles Keepax
Takashi Iwai
Hans de Goede
Cezary Rojewski
Curtis Malainey