mirror of https://github.com/torvalds/linux.git
1083 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
1e15510b71 |
Including fixes from bluetooth. We didn't get netfilter or wireless PRs
this week, so next week's PR is probably going to be bigger. A healthy
dose of fixes for bugs introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net()
RDMA driver register notifier after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue
with LED support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+Ci7
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
|
|
Stanislav Fomichev
|
18912c5206 |
tcp: devmem: don't write truncated dmabuf CMSGs to userspace
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes:
|
|
Jiayuan Chen
|
36b62df568 |
bpf: Fix wrong copied_seq calculation
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes:
|
|
Pengcheng Yang
|
cf44bd08cd |
tcp: only release congestion control if it has been initialized
Currently, when cleaning up congestion control, we always call the release regardless of whether it has been initialized. There is no need to release when closing TCP_LISTEN and TCP_CLOSE (close immediately after socket()). In this case, tcp_cdg calls kfree(NULL) in release without causing an exception, but for some customized ca, this could lead to unexpected exceptions. We need to ensure that init and release are called in pairs. Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Link: https://patch.msgid.link/1729845944-6003-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Vadim Fedorenko
|
822b5bc6db |
net_tstamp: add SCM_TS_OPT_ID for RAW sockets
The last type of sockets which supports SOF_TIMESTAMPING_OPT_ID is RAW sockets. To add new option this patch converts all callers (direct and indirect) of _sock_tx_timestamp to provide sockcm_cookie instead of tsflags. And while here fix __sock_tx_timestamp to receive tsflags as __u32 instead of __u16. Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Link: https://patch.msgid.link/20241001125716.2832769-3-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Mina Almasry
|
8f0b3cc9a4 |
tcp: RX path for devmem TCP
In tcp_recvmsg_locked(), detect if the skb being received by the user is a devmem skb. In this case - if the user provided the MSG_SOCK_DEVMEM flag - pass it to tcp_recvmsg_devmem() for custom handling. tcp_recvmsg_devmem() copies any data in the skb header to the linear buffer, and returns a cmsg to the user indicating the number of bytes returned in the linear buffer. tcp_recvmsg_devmem() then loops over the unaccessible devmem skb frags, and returns to the user a cmsg_devmem indicating the location of the data in the dmabuf device memory. cmsg_devmem contains this information: 1. the offset into the dmabuf where the payload starts. 'frag_offset'. 2. the size of the frag. 'frag_size'. 3. an opaque token 'frag_token' to return to the kernel when the buffer is to be released. The pages awaiting freeing are stored in the newly added sk->sk_user_frags, and each page passed to userspace is get_page()'d. This reference is dropped once the userspace indicates that it is done reading this page. All pages are released when the socket is destroyed. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240910171458.219195-10-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Mina Almasry
|
65249feb6b |
net: add support for skbs with unreadable frags
For device memory TCP, we expect the skb headers to be available in host memory for access, and we expect the skb frags to be in device memory and unaccessible to the host. We expect there to be no mixing and matching of device memory frags (unaccessible) with host memory frags (accessible) in the same skb. Add a skb->devmem flag which indicates whether the frags in this skb are device memory frags or not. __skb_fill_netmem_desc() now checks frags added to skbs for net_iov, and marks the skb as skb->devmem accordingly. Add checks through the network stack to avoid accessing the frags of devmem skbs and avoid coalescing devmem skbs with non devmem skbs. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-9-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Mina Almasry
|
9f6b619edf |
net: support non paged skb frags
Make skb_frag_page() fail in the case where the frag is not backed by a page, and fix its relevant callers to handle this case. Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-8-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Jason Xing
|
be8e9eb375 |
net-timestamp: introduce SOF_TIMESTAMPING_OPT_RX_FILTER flag
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter out rx software timestamp report, especially after a process turns on netstamp_needed_key which can time stamp every incoming skb. Previously, we found out if an application starts first which turns on netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE could also get rx timestamp. Now we handle this case by introducing this new flag without breaking users. Quoting Willem to explain why we need the flag: "why a process would want to request software timestamp reporting, but not receive software timestamp generation. The only use I see is when the application does request SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE." Similarly, this new flag could also be used for hardware case where we can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive hardware receive timestamp. Another thing about errqueue in this patch I have a few words to say: In this case, we need to handle the egress path carefully, or else reporting the tx timestamp will fail. Egress path and ingress path will finally call sock_recv_timestamp(). We have to distinguish them. Errqueue is a good indicator to reflect the flow direction. Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Jakub Kicinski
|
3cbd2090d3 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/faraday/ftgmac100.c |
|
Xueming Feng
|
bac76cf898 |
tcp: fix forever orphan socket caused by tcp_abort
We have some problem closing zero-window fin-wait-1 tcp sockets in our
environment. This patch come from the investigation.
Previously tcp_abort only sends out reset and calls tcp_done when the
socket is not SOCK_DEAD, aka orphan. For orphan socket, it will only
purging the write queue, but not close the socket and left it to the
timer.
While purging the write queue, tp->packets_out and sk->sk_write_queue
is cleared along the way. However tcp_retransmit_timer have early
return based on !tp->packets_out and tcp_probe_timer have early
return based on !sk->sk_write_queue.
This caused ICSK_TIME_RETRANS and ICSK_TIME_PROBE0 not being resched
and socket not being killed by the timers, converting a zero-windowed
orphan into a forever orphan.
This patch removes the SOCK_DEAD check in tcp_abort, making it send
reset to peer and close the socket accordingly. Preventing the
timer-less orphan from happening.
According to Lorenzo's email in the v1 thread, the check was there to
prevent force-closing the same socket twice. That situation is handled
by testing for TCP_CLOSE inside lock, and returning -ENOENT if it is
already closed.
The -ENOENT code comes from the associate patch Lorenzo made for
iproute2-ss; link attached below, which also conform to RFC 9293.
At the end of the patch, tcp_write_queue_purge(sk) is removed because it
was already called in tcp_done_with_error().
p.s. This is the same patch with v2. Resent due to mis-labeled "changes
requested" on patchwork.kernel.org.
Link: https://patchwork.ozlabs.org/project/netdev/patch/1450773094-7978-3-git-send-email-lorenzo@google.com/
Fixes:
|
|
|
Jason Xing
|
c026c6562f |
tcp: rstreason: introduce SK_RST_REASON_TCP_DISCONNECT_WITH_DATA for active reset
When user tries to disconnect a socket and there are more data written into tcp write queue, we should tell users about this reset reason. Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Jason Xing
|
edefba66d9 |
tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset
Introducing a new type TCP_STATE to handle some reset conditions appearing in RFC 793 due to its socket state. Actually, we can look into RFC 9293 which has no discrepancy about this part. Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Jason Xing
|
8407994f0c |
tcp: rstreason: introduce SK_RST_REASON_TCP_ABORT_ON_MEMORY for active reset
Introducing a new type TCP_ABORT_ON_MEMORY for tcp reset reason to handle out of memory case. Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Jason Xing
|
edc92b48ab |
tcp: rstreason: introduce SK_RST_REASON_TCP_ABORT_ON_LINGER for active reset
Introducing a new type TCP_ABORT_ON_LINGER for tcp reset reason to handle negative linger value case. Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Jason Xing
|
90c36325c7 |
tcp: rstreason: introduce SK_RST_REASON_TCP_ABORT_ON_CLOSE for active reset
Introducing a new type TCP_ABORT_ON_CLOSE for tcp reset reason to handle the case where more data is unread in closing phase. Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
Dmitry Safonov
|
78b1b27db9 |
net/tcp: Remove tcp_hash_fail()
Now there are tracepoints, that cover all functionality of tcp_hash_fail(), but also wire up missing places They are also faster, can be disabled and provide filtering. This potentially may create a regression if a userspace depends on dmesg logs. Fingers crossed, let's see if anyone complains in reality. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Dmitry Safonov
|
96be3dcd01 |
net/tcp: Add tcp-md5 and tcp-ao tracepoints
Instead of forcing userspace to parse dmesg (that's what currently is happening, at least in codebase of my current company), provide a better way, that can be enabled/disabled in runtime. Currently, there are already tcp events, add hashing related ones there, too. Rasdaemon currently exercises net_dev_xmit_timeout, devlink_health_report, but it'll be trivial to teach it to deal with failed hashes. Otherwise, BGP may trace/log them itself. Especially exciting for possible investigations is key rotation (RNext_key requests). Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Dmitry Safonov
|
811efc06e5 |
net/tcp: Move tcp_inbound_hash() from headers
Two reasons: 1. It's grown up enough 2. In order to not do header spaghetti by including <trace/events/tcp.h>, which is necessary for TCP tracepoints. While at it, unexport and make static tcp_inbound_ao_hash(). Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Jakub Kicinski
|
62b5bf58b9 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/pensando/ionic/ionic_txrx.c |
|
Eric Dumazet
|
b4cb4a1391 |
net: use unrcu_pointer() helper
Toke mentioned unrcu_pointer() existence, allowing to remove some of the ugly casts we have when using xchg() for rcu protected pointers. Also make inet_rcv_compat const. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20240604111603.45871-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
|
Kevin Yang
|
f086edef71 |
tcp: add sysctl_tcp_rto_min_us
Adding a sysctl knob to allow user to specify a default rto_min at socket init time, other than using the hard coded 200ms default rto_min. Note that the rto_min route option has the highest precedence for configuring this setting, followed by the TCP_BPF_RTO_MIN socket option, followed by the tcp_rto_min_us sysctl. Signed-off-by: Kevin Yang <yyd@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Jason Xing
|
a46d0ea5c9 |
tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB
According to RFC 1213, we should also take CLOSE-WAIT sockets into
consideration:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
After this, CurrEstab counter will display the total number of
ESTABLISHED and CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) if we change the state to ESTABLISHED.
b) if we change the state from SYN-RECEIVED to CLOSE-WAIT.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Please note: there are two chances that old state of socket can be changed
to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED.
So we have to take care of the former case.
Fixes:
|
|
|
Jakub Kicinski
|
a535d59432 |
net: tls: fix marking packets as decrypted
For TLS offload we mark packets with skb->decrypted to make sure
they don't escape the host without getting encrypted first.
The crypto state lives in the socket, so it may get detached
by a call to skb_orphan(). As a safety check - the egress path
drops all packets with skb->decrypted and no "crypto-safe" socket.
The skb marking was added to sendpage only (and not sendmsg),
because tls_device injected data into the TCP stack using sendpage.
This special case was missed when sendpage got folded into sendmsg.
Fixes:
|
|
|
Eric Dumazet
|
5ce4645c23 |
tcp: fix races in tcp_abort()
tcp_abort() has the same issue than the one fixed in the prior patch
in tcp_write_err().
In order to get consistent results from tcp_poll(), we must call
sk_error_report() after tcp_done().
We can use tcp_done_with_error() to centralize this logic.
Fixes:
|
|
|
Eric Dumazet
|
5e514f1cba |
tcp: add tcp_done_with_error() helper
tcp_reset() ends with a sequence that is carefuly ordered. We need to fix [e]poll bugs in the following patches, it makes sense to use a common helper. Suggested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20240528125253.1966136-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
Matthieu Baerts (NGI0)
|
c084ebd77a |
tcp: socket option to check for MPTCP fallback to TCP
A way for an application to know if an MPTCP connection fell back to TCP is to use getsockopt(MPTCP_INFO) and look for errors. The issue with this technique is that the same errors -- EOPNOTSUPP (IPv4) and ENOPROTOOPT (IPv6) -- are returned if there was a fallback, *or* if the kernel doesn't support this socket option. The userspace then has to look at the kernel version to understand what the errors mean. It is not clean, and it doesn't take into account older kernels where the socket option has been backported. A cleaner way would be to expose this info to the TCP socket level. In case of MPTCP socket where no fallback happened, the socket options for the TCP level will be handled in MPTCP code, in mptcp_getsockopt_sol_tcp(). If not, that will be in TCP code, in do_tcp_getsockopt(). So MPTCP simply has to set the value 1, while TCP has to set 0. If the socket option is not supported, one of these two errors will be reported: - EOPNOTSUPP (95 - Operation not supported) for MPTCP sockets - ENOPROTOOPT (92 - Protocol not available) for TCP sockets, e.g. on the socket received after an 'accept()', when the client didn't request to use MPTCP: this socket will be a TCP one, even if the listen socket was an MPTCP one. With this new option, the kernel can return a clear answer to both "Is this kernel new enough to tell me the fallback status?" and "If it is new enough, is it currently a TCP or MPTCP socket?" questions, while not breaking the previous method. Acked-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240509-upstream-net-next-20240509-mptcp-tcp_is_mptcp-v1-1-f846df999202@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Jakub Kicinski
|
e7073830cc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c |
|
|
Eric Dumazet
|
94062790ae |
tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
TCP_SYN_RECV state is really special, it is only used by
cross-syn connections, mostly used by fuzzers.
In the following crash [1], syzbot managed to trigger a divide
by zero in tcp_rcv_space_adjust()
A socket makes the following state transitions,
without ever calling tcp_init_transfer(),
meaning tcp_init_buffer_space() is also not called.
TCP_CLOSE
connect()
TCP_SYN_SENT
TCP_SYN_RECV
shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN)
TCP_FIN_WAIT1
To fix this issue, change tcp_shutdown() to not
perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition,
which makes no sense anyway.
When tcp_rcv_state_process() later changes socket state
from TCP_SYN_RECV to TCP_ESTABLISH, then look at
sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state,
and send a FIN packet from a sane socket state.
This means tcp_send_fin() can now be called from BH
context, and must use GFP_ATOMIC allocations.
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767
Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48
RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246
RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7
R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30
R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da
FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0
Call Trace:
<TASK>
tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513
tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578
inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680
sock_recvmsg_nosec net/socket.c:1046 [inline]
sock_recvmsg+0x109/0x280 net/socket.c:1068
____sys_recvmsg+0x1db/0x470 net/socket.c:2803
___sys_recvmsg net/socket.c:2845 [inline]
do_recvmmsg+0x474/0xae0 net/socket.c:2939
__sys_recvmmsg net/socket.c:3018 [inline]
__do_sys_recvmmsg net/socket.c:3041 [inline]
__se_sys_recvmmsg net/socket.c:3034 [inline]
__x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7faeb6363db9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001
Fixes:
|
|
|
Eric Dumazet
|
f3d93817fb |
net: add <net/proto_memory.h>
Move some proto memory definitions out of <net/sock.h> Very few files need them, and following patch will include <net/hotdata.h> from <net/proto_memory.h> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240429134025.1233626-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Eric Dumazet
|
dda4d96acb |
tcp: move tcp_out_of_memory() to net/ipv4/tcp.c
tcp_out_of_memory() has a single caller: tcp_check_oom(). Following patch will also make sk_memory_allocated() not anymore visible from <net/sock.h> and <net/tcp.h> Add const qualifier to sock argument of tcp_out_of_memory() and tcp_check_oom(). Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240429134025.1233626-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Eric Dumazet
|
a86a0661b8 |
net: move sysctl_max_skb_frags to net_hotdata
sysctl_max_skb_frags is used in TCP and MPTCP fast paths, move it to net_hodata for better cache locality. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240429134025.1233626-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Jason Xing
|
5691276b39 |
rstreason: prepare for active reset
Like what we did to passive reset: only passing possible reset reason in each active reset path. No functional changes. Signed-off-by: Jason Xing <kernelxing@tencent.com> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
|
Jon Maloy
|
05ea491641 |
tcp: add support for SO_PEEK_OFF socket option
When reading received messages from a socket with MSG_PEEK, we may want to read the contents with an offset, like we can do with pread/preadv() when reading files. Currently, it is not possible to do that. In this commit, we add support for the SO_PEEK_OFF socket option for TCP, in a similar way it is done for Unix Domain sockets. In the iperf3 log examples shown below, we can observe a throughput improvement of 15-20 % in the direction host->namespace when using the protocol splicer 'pasta' (https://passt.top). This is a consistent result. pasta(1) and passt(1) implement user-mode networking for network namespaces (containers) and virtual machines by means of a translation layer between Layer-2 network interface and native Layer-4 sockets (TCP, UDP, ICMP/ICMPv6 echo). Received, pending TCP data to the container/guest is kept in kernel buffers until acknowledged, so the tool routinely needs to fetch new data from socket, skipping data that was already sent. At the moment this is implemented using a dummy buffer passed to recvmsg(). With this change, we don't need a dummy buffer and the related buffer copy (copy_to_user()) anymore. passt and pasta are supported in KubeVirt and libvirt/qemu. jmaloy@freyr:~/passt$ perf record -g ./pasta --config-net -f SO_PEEK_OFF not supported by kernel. jmaloy@freyr:~/passt# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.122.1, port 44822 [ 5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 44832 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 1.02 GBytes 8.78 Gbits/sec [ 5] 1.00-2.00 sec 1.06 GBytes 9.08 Gbits/sec [ 5] 2.00-3.00 sec 1.07 GBytes 9.15 Gbits/sec [ 5] 3.00-4.00 sec 1.10 GBytes 9.46 Gbits/sec [ 5] 4.00-5.00 sec 1.03 GBytes 8.85 Gbits/sec [ 5] 5.00-6.00 sec 1.10 GBytes 9.44 Gbits/sec [ 5] 6.00-7.00 sec 1.11 GBytes 9.56 Gbits/sec [ 5] 7.00-8.00 sec 1.07 GBytes 9.20 Gbits/sec [ 5] 8.00-9.00 sec 667 MBytes 5.59 Gbits/sec [ 5] 9.00-10.00 sec 1.03 GBytes 8.83 Gbits/sec [ 5] 10.00-10.04 sec 30.1 MBytes 6.36 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.04 sec 10.3 GBytes 8.78 Gbits/sec receiver ----------------------------------------------------------- Server listening on 5201 (test #2) ----------------------------------------------------------- ^Ciperf3: interrupt - the server has terminated jmaloy@freyr:~/passt# logout [ perf record: Woken up 23 times to write data ] [ perf record: Captured and wrote 5.696 MB perf.data (35580 samples) ] jmaloy@freyr:~/passt$ jmaloy@freyr:~/passt$ perf record -g ./pasta --config-net -f SO_PEEK_OFF supported by kernel. jmaloy@freyr:~/passt# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.122.1, port 52084 [ 5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 52098 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 1.32 GBytes 11.3 Gbits/sec [ 5] 1.00-2.00 sec 1.19 GBytes 10.2 Gbits/sec [ 5] 2.00-3.00 sec 1.26 GBytes 10.8 Gbits/sec [ 5] 3.00-4.00 sec 1.36 GBytes 11.7 Gbits/sec [ 5] 4.00-5.00 sec 1.33 GBytes 11.4 Gbits/sec [ 5] 5.00-6.00 sec 1.21 GBytes 10.4 Gbits/sec [ 5] 6.00-7.00 sec 1.31 GBytes 11.2 Gbits/sec [ 5] 7.00-8.00 sec 1.25 GBytes 10.7 Gbits/sec [ 5] 8.00-9.00 sec 1.33 GBytes 11.5 Gbits/sec [ 5] 9.00-10.00 sec 1.24 GBytes 10.7 Gbits/sec [ 5] 10.00-10.04 sec 56.0 MBytes 12.1 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.04 sec 12.9 GBytes 11.0 Gbits/sec receiver ----------------------------------------------------------- Server listening on 5201 (test #2) ----------------------------------------------------------- ^Ciperf3: interrupt - the server has terminated logout [ perf record: Woken up 20 times to write data ] [ perf record: Captured and wrote 5.040 MB perf.data (33411 samples) ] jmaloy@freyr:~/passt$ The perf record confirms this result. Below, we can observe that the CPU spends significantly less time in the function ____sys_recvmsg() when we have offset support. Without offset support: ---------------------- jmaloy@freyr:~/passt$ perf report -q --symbol-filter=do_syscall_64 \ -p ____sys_recvmsg -x --stdio -i perf.data | head -1 46.32% 0.00% passt.avx2 [kernel.vmlinux] [k] do_syscall_64 ____sys_recvmsg With offset support: ---------------------- jmaloy@freyr:~/passt$ perf report -q --symbol-filter=do_syscall_64 \ -p ____sys_recvmsg -x --stdio -i perf.data | head -1 28.12% 0.00% passt.avx2 [kernel.vmlinux] [k] do_syscall_64 ____sys_recvmsg Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jon Maloy <jmaloy@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240409152805.913891-1-jmaloy@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Eric Dumazet
|
9b9fd45869 |
tcp: tweak tcp_sock_write_txrx size assertion
I forgot 32bit arches might have 64bit alignment for u64
fields.
tcp_sock_write_txrx group does not contain pointers,
but two u64 fields. It is possible that on 32bit kernel,
a 32bit hole is before tp->tcp_clock_cache.
I will try to remember a group can be bigger on 32bit
kernels in the future.
With help from Vladimir Oltean.
Fixes:
|
|
|
Eric Dumazet
|
41eecbd712 |
tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field
TCP can transform a TIMEWAIT socket into a SYN_RECV one from
a SYN packet, and the ISN of the SYNACK packet is normally
generated using TIMEWAIT tw_snd_nxt :
tcp_timewait_state_process()
...
u32 isn = tcptw->tw_snd_nxt + 65535 + 2;
if (isn == 0)
isn++;
TCP_SKB_CB(skb)->tcp_tw_isn = isn;
return TCP_TW_SYN;
This SYN packet also bypasses normal checks against listen queue
being full or not.
tcp_conn_request()
...
__u32 isn = TCP_SKB_CB(skb)->tcp_tw_isn;
...
/* TW buckets are converted to open requests without
* limitations, they conserve resources and peer is
* evidently real one.
*/
if ((syncookies == 2 || inet_csk_reqsk_queue_is_full(sk)) && !isn) {
want_cookie = tcp_syn_flood_action(sk, rsk_ops->slab_name);
if (!want_cookie)
goto drop;
}
This was using TCP_SKB_CB(skb)->tcp_tw_isn field in skb.
Unfortunately this field has been accidentally cleared
after the call to tcp_timewait_state_process() returning
TCP_TW_SYN.
Using a field in TCP_SKB_CB(skb) for a temporary state
is overkill.
Switch instead to a per-cpu variable.
As a bonus, we do not have to clear tcp_tw_isn in TCP receive
fast path.
It is temporarily set then cleared only in the TCP_TW_SYN dance.
Fixes:
|
|
|
Eric Dumazet
|
d2c3a7eb1a |
tcp: more struct tcp_sock adjustments
tp->recvmsg_inq is used from tcp recvmsg() thus should be in tcp_sock_read_rx group. tp->tcp_clock_cache and tp->tcp_mstamp are written both in rx and tx paths, thus are better placed in tcp_sock_write_txrx group. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Eric Dumazet
|
f410cbea9f |
tcp: annotate data-races around tp->window_clamp
tp->window_clamp can be read locklessly, add READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/r/20240404114231.2195171-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Eric Dumazet
|
151c9c724d |
tcp: properly terminate timers for kernel sockets
We had various syzbot reports about tcp timers firing after the corresponding netns has been dismantled. Fortunately Josef Bacik could trigger the issue more often, and could test a patch I wrote two years ago. When TCP sockets are closed, we call inet_csk_clear_xmit_timers() to 'stop' the timers. inet_csk_clear_xmit_timers() can be called from any context, including when socket lock is held. This is the reason it uses sk_stop_timer(), aka del_timer(). This means that ongoing timers might finish much later. For user sockets, this is fine because each running timer holds a reference on the socket, and the user socket holds a reference on the netns. For kernel sockets, we risk that the netns is freed before timer can complete, because kernel sockets do not hold reference on the netns. This patch adds inet_csk_clear_xmit_timers_sync() function that using sk_stop_timer_sync() to make sure all timers are terminated before the kernel socket is released. Modules using kernel sockets close them in their netns exit() handler. Also add sock_not_owned_by_me() helper to get LOCKDEP support : inet_csk_clear_xmit_timers_sync() must not be called while socket lock is held. It is very possible we can revert in the future commit |
|
|
Jason Xing
|
683a67da95 |
tcp: annotate a data-race around sysctl_tcp_wmem[0]
When reading wmem[0], it could be changed concurrently without READ_ONCE() protection. So add one annotation here. Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
Gavrilov Ilia
|
716edc9706 |
tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function
The 'len' variable can't be negative when assigned the result of
'min_t' because all 'min_t' parameters are cast to unsigned int,
and then the minimum one is chosen.
To fix the logic, check 'len' as read from 'optlen',
where the types of relevant variables are (signed) int.
Fixes:
|
|
|
Eric Dumazet
|
490a79faf9 |
net: introduce include/net/rps.h
Move RPS related structures and helpers from include/linux/netdevice.h and include/net/sock.h to a new include file. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Eric Dumazet
|
345a6e2631 |
tcp: align tcp_sock_write_rx group
Stephen Rothwell and kernel test robot reported that some arches
(parisc, hexagon) and/or compilers would not like blamed commit.
Lets make sure tcp_sock_write_rx group does not start with a hole.
While we are at it, correct tcp_sock_write_tx CACHELINE_ASSERT_GROUP_SIZE()
since after the blamed commit, we went to 105 bytes.
Fixes:
|
|
|
Eric Dumazet
|
119ff04864 |
tcp: move tp->scaling_ratio to tcp_sock_read_txrx group
tp->scaling_ratio is a read mostly field, used in rx and tx fast paths.
Fixes:
|
|
|
Eric Dumazet
|
577e4432f3 |
tcp: add sanity checks to rx zerocopy
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.
This patch adds to can_map_frag() these additional checks:
- Page must not be a compound one.
- page->mapping must be NULL.
This fixes the panic reported by ZhangPeng.
syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.
r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
&(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
Fixes:
|
|
Salvatore Dipietro
|
7267e8dcad |
tcp: Add memory barrier to tcp_push()
On CPUs with weak memory models, reads and updates performed by tcp_push to the sk variables can get reordered leaving the socket throttled when it should not. The tasklet running tcp_wfree() may also not observe the memory updates in time and will skip flushing any packets throttled by tcp_push(), delaying the sending. This can pathologically cause 40ms extra latency due to bad interactions with delayed acks. Adding a memory barrier in tcp_push removes the bug, similarly to the previous commit |
|
|
Linus Torvalds
|
3e7aeb78ab |
Networking changes for 6.8.
Core & protocols
----------------
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up
build time warnings to safeguard against future header changes.
This improves TCP performances with many concurrent connections
up to 40%.
- Add page-pool netlink-based introspection, exposing the
memory usage and recycling stats. This helps indentify
bad PP users and possible leaks.
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set.
This lowers the time taken by connect() for hosts having
many active connections to the same destination.
- Refactor the TCP bind conflict code, shrinking related socket
structs.
- Refactor TCP SYN-Cookie handling, as a preparation step to
allow arbitrary SYN-Cookie processing via eBPF.
- Tune optmem_max for 0-copy usage, increasing the default value
to 128KB and namespecifying it.
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations.
- Reduce extension header parsing overhead at GRO time.
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries.
- Reorder nftables struct members, to keep data accessed by the
datapath first.
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer.
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex).
- More data-race annotations.
- Extend the diag interface to dump TCP bound-only sockets.
- Conditional notification of events for TC qdisc class and actions.
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID.
- Implement SMCv2.1 virtual ISM device support.
- Add support for Batman-avd mulicast packet type.
BPF
---
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers. It
improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload.
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y.
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques.
- Support uid/gid options when mounting bpffs.
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is identified
by its id.
- Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext.
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter.
- Support for VLAN tag in XDP hints.
- Remove deprecated bpfilter kernel leftovers given the project
is developed in user-space (https://github.com/facebook/bpfilter).
Misc
----
- Support for parellel TC self-tests execution.
- Increase MPTCP self-tests coverage.
- Updated the bridge documentation, including several so-far
undocumented features.
- Convert all the net self-tests to run in unique netns, to
avoid random failures due to conflict and allow concurrent
runs.
- Add TCP-AO self-tests.
- Add kunit tests for both cfg80211 and mac80211.
- Autogenerate Netlink families documentation from YAML spec.
- Add yml-gen support for fixed headers and recursive nests, the
tool can now generate user-space code for all genetlink families
for which we have specs.
- A bunch of additional module descriptions fixes.
- Catch incorrect freeing of pages belonging to a page pool.
Driver API
----------
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust.
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship.
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances.
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host.
- Add support for ethtool symmetric-xor RSS hash.
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform.
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute.
- Convert older drivers to platform remove callback returning void.
- Add support for PHY package MMD read/write.
New hardware / drivers
----------------------
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed
-------
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will allow
in future releases combining multiple PFs devices attached to
different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring param,
coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1bW6
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
|
Linus Torvalds
|
5db8752c3b |
vfs-6.8.iov_iter
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZUzBQAKCRCRxhvAZXjc ot+3AQCZw1PBD4azVxFMWH76qwlAGoVIFug4+ogKU/iUa4VLygEA2FJh1vLJw5iI LpgBEIUTPVkwtzinAW94iJJo1Vr7NAI= =p6PB -----END PGP SIGNATURE----- Merge tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs iov_iter cleanups from Christian Brauner: "This contains a minor cleanup. The patches drop an unused argument from import_single_range() allowing to replace import_single_range() with import_ubuf() and dropping import_single_range() completely" * tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: iov_iter: replace import_single_range() with import_ubuf() iov_iter: remove unused 'iov' argument from import_single_range() |
|
|
Jakub Kicinski
|
2483e7f04c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h |
|
Dmitry Safonov
|
965c00e4ea |
net/tcp: Limit TCP_AO_REPAIR to non-listen sockets
Listen socket is not an established TCP connection, so
setsockopt(TCP_AO_REPAIR) doesn't have any impact.
Restrict this uAPI for listen sockets.
Fixes:
|