mirror of https://github.com/torvalds/linux.git
2682 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
49d5759268 |
ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
|
|
|
Linus Torvalds
|
877934769e |
- Cache the AMD debug registers in per-CPU variables to avoid MSR writes
where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmP1RDIACgkQEsHwGGHe VUohBw//ZB9ZRqsrKdm6D9YaP2x4Zb+kqKqo6rjYeWaYqyPyCwDujPwh+pb3Oq1t aj62muDv1t/wEJc8mKNkfXkjEEtBVAOcpb5YIpKreoEvNKyevol83Ih0u5iJcTRE E5qf8HDS8b/JZrcazJJLl6WQmQNH5RiKSu5bbCpRhoeOcyo5pRYR5MztK9vNmAQk GMdwHsUSU+jN8uiE4HnpaOb/luhgFindRwZVTpdjJegQWLABS8cl3CKeTv4+PW45 isvv37XnQP248wsptIEVRHeG6g3g/HtvwRx7DikUw06QwUyUK7H9hJssOoSP8TL9 u4psRwfWnJ1OxU6klL+s0Ii+pjQ97wXmK/oqK7QkdUwhWqR/mQAW2e9kWHAngyDn A6mKbzSM6HFAeSXQpB9cMb6uvYRD44SngDFe3WXtEK8jiiQ70ikUm4E28I5KJOPg s+RyioHk0NFRHYSOOBqNG1NKz6ED7L3GbgbbzxkgMh21AAyI3X351t+PtGoLV5ew eqOsM7lbg9Scg1LvPk1JcoALS8USWqgar397rz9qGUs+OkPWBtEBCmTdMz/Eb+2t g/WHdLS5/ajSs5gNhT99W3DeqZMPDEkgBRSeyBBmY3CUD3gBL2wXEktRXv504zBR RC4oyUPX3c9E2ib6GATLE3kBLbcz9hTWbMxF+X3lLJvTVd/Qc2o= =v/ZC -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid updates from Borislav Petkov: - Cache the AMD debug registers in per-CPU variables to avoid MSR writes where possible, when supporting a debug registers swap feature for SEV-ES guests - Add support for AMD's version of eIBRS called Automatic IBRS which is a set-and-forget control of indirect branch restriction speculation resources on privilege change - Add support for a new x86 instruction - LKGS - Load kernel GS which is part of the FRED infrastructure - Reset SPEC_CTRL upon init to accomodate use cases like kexec which rediscover - Other smaller fixes and cleanups * tag 'x86_cpu_for_v6.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd: Cache debug register values in percpu variables KVM: x86: Propagate the AMD Automatic IBRS feature to the guest x86/cpu: Support AMD Automatic IBRS x86/cpu, kvm: Add the SMM_CTL MSR not present feature x86/cpu, kvm: Add the Null Selector Clears Base feature x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature KVM: x86: Move open-coded CPUID leaf 0x80000021 EAX bit propagation code x86/cpu, kvm: Add support for CPUID_80000021_EAX x86/gsseg: Add the new <asm/gsseg.h> header to <asm/asm-prototypes.h> x86/gsseg: Use the LKGS instruction if available for load_gs_index() x86/gsseg: Move load_gs_index() to its own new header file x86/gsseg: Make asm_load_gs_index() take an u16 x86/opcode: Add the LKGS instruction to x86-opcode-map x86/cpufeature: Add the CPU feature bit for LKGS x86/bugs: Reset speculation control settings on init x86/cpu: Remove redundant extern x86_read_arch_cap_msr() |
|
Greg Kroah-Hartman
|
2c10b61421 |
kvm: initialize all of the kvm_debugregs structure before sending it to userspace
When calling the KVM_GET_DEBUGREGS ioctl, on some configurations, there might be some unitialized portions of the kvm_debugregs structure that could be copied to userspace. Prevent this as is done in the other kvm ioctls, by setting the whole structure to 0 before copying anything into it. Bonus is that this reduces the lines of code as the explicit flag setting and reserved space zeroing out can be removed. Cc: Sean Christopherson <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <x86@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable <stable@kernel.org> Reported-by: Xingyuan Mo <hdthky0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Message-Id: <20230214103304.3689213-1-gregkh@linuxfoundation.org> Tested-by: Xingyuan Mo <hdthky0@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
Paolo Bonzini
|
4bc6dcaa15 |
KVM SVM changes for 6.3:
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move the SVM-specific "host flags" into vcpu_svm (extracted from the
vNMI enabling series)
- A handful for fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEMHr+pfEFOIzK+KY1YJEiAU0MEvkFAmPsH7kSHHNlYW5qY0Bn
b29nbGUuY29tAAoJEGCRIgFNDBL5/dQQAJSVCYA7F7LcfJf+c1ULG0XCd8rHnXdR
EGTygTnWrzwTCRaunOBPE4AJRxKdkwTKy+yfnnQVRdYYfRe1SZKpUQ2XNEDGn0+v
zVfOmSFFcCWXmJeY8y5n1GlDH4ENO3G7nD1ncDQ0I9PazmOsmxChoVZ9afFJ5bpo
73hjcYVfUDYxGkeRLWSSSFtWIGguE8BkpRH3wZ8MGZi+ueoFUJPPBKHeDtxCV2/T
KcJLne8tQVTiWCdMO3EFwxgIvsjQDoT0gZYLYNHJ6KqD9Szc3jA9v2ryTm5IYlpb
akYUqePaD0SGrrfDBrwz3bLu3fehDu7eduXESRlzzb8S4xP7/qXeo9KeVN+b4MBb
nmBBFncvMWbC8Po5wB5OVAfAa7ACmGiXeBV8pfgGI6FTq1fpc4VNm2PevKkDvlqN
O2eZ1KuNkwBnbIPj3JVPPnsJcUjYXFjZyzfpMV1T+ExmL/IYceatX4S7zfgL5nUg
3qFi5mX2Cufk2EBvBu+Dkpt/H4lze+ysZRciMC+v7Q4LWAYZ8HW1a44pnBVUJMPM
bWiJ1/O8RIWM1tWIrlO38+ZZalbu3spIVMBXKzqEGXvpUwJ4UgZM1tFiWvISTVFe
2X6N3d7aT/DQ1PzZU6BsyVZWAFaodHBauMcr9FUkWqqGu3HOhqC4rSJZ9eRR7V5O
WSp1gTVY1JXy
=AVpx
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.3' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.3:
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move the SVM-specific "host flags" into vcpu_svm (extracted from the
vNMI enabling series)
- A handful for fixes and cleanups
|
|
|
Paolo Bonzini
|
157ed9cb04 |
KVM x86 PMU changes for 6.3:
- Add support for created masked events for the PMU filter to allow
userspace to heavily restrict what events the guest can use without
needing to create an absurd number of events
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel SPR
-----BEGIN PGP SIGNATURE-----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=ev5v
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.3' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.3:
- Add support for created masked events for the PMU filter to allow
userspace to heavily restrict what events the guest can use without
needing to create an absurd number of events
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel SPR
|
|
Tom Lendacky
|
6f0f2d5ef8 |
KVM: x86: Mitigate the cross-thread return address predictions bug
By default, KVM/SVM will intercept attempts by the guest to transition out of C0. However, the KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change this behavior. To mitigate the cross-thread return address predictions bug (X86_BUG_SMT_RSB), a VMM must not be allowed to override the default behavior to intercept C0 transitions. Use a module parameter to control the mitigation on processors that are vulnerable to X86_BUG_SMT_RSB. If the processor is vulnerable to the X86_BUG_SMT_RSB bug and the module parameter is set to mitigate the bug, KVM will not allow the disabling of the HLT, MWAIT and CSTATE exits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <4019348b5e07148eb4d593380a5f6713b93c9a16.1675956146.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
Michal Luczaj
|
e73ba25fdc |
KVM: x86: Simplify msr_io()
As of commit
|
|
|
Michal Luczaj
|
4559e6cf45 |
KVM: x86: Remove unnecessary initialization in kvm_vm_ioctl_set_msr_filter()
Do not initialize the value of `r`, as it will be overwritten. Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://lore.kernel.org/r/20230107001256.2365304-6-mhal@rbox.co Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Michal Luczaj
|
1fdefb8bd8 |
KVM: x86: Explicitly state lockdep condition of msr_filter update
Replace `1` with the actual mutex_is_locked() check. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://lore.kernel.org/r/20230107001256.2365304-5-mhal@rbox.co [sean: delete the comment that explained the hardocded '1'] Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Michal Luczaj
|
4d85cfcaa8 |
KVM: x86: Simplify msr_filter update
Replace srcu_dereference()+rcu_assign_pointer() sequence with a single rcu_replace_pointer(). Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://lore.kernel.org/r/20230107001256.2365304-4-mhal@rbox.co Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Michal Luczaj
|
708f799d22 |
KVM: x86: Optimize kvm->lock and SRCU interaction (KVM_X86_SET_MSR_FILTER)
Reduce time spent holding kvm->lock: unlock mutex before calling synchronize_srcu(). There is no need to hold kvm->lock until all vCPUs have been kicked, KVM only needs to guarantee that all vCPUs will switch to the new filter before exiting to userspace. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://lore.kernel.org/r/20230107001256.2365304-3-mhal@rbox.co [sean: expand changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Maxim Levitsky
|
32e69f232d |
KVM: x86: Use emulator callbacks instead of duplicating "host flags"
Instead of re-defining the "host flags" bits, just expose dedicated helpers for each of the two remaining flags that are consumed by the emulator. The emulator never consumes both "is guest" and "is SMM" in close proximity, so there is no motivation to avoid additional indirect branches. Also while at it, garbage collect the recently removed host flags. No functional change is intended. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Tested-by: Santosh Shukla <Santosh.Shukla@amd.com> Link: https://lore.kernel.org/r/20221129193717.513824-6-mlevitsk@redhat.com [sean: fix CONFIG_KVM_SMM=n builds, tweak names of wrappers] Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Sean Christopherson
|
2de154f541 |
KVM: x86/pmu: Provide "error" semantics for unsupported-but-known PMU MSRs
Provide "error" semantics (read zeros, drop writes) for userspace accesses to MSRs that are ultimately unsupported for whatever reason, but for which KVM told userspace to save and restore the MSR, i.e. for MSRs that KVM included in KVM_GET_MSR_INDEX_LIST. Previously, KVM special cased a few PMU MSRs that were problematic at one point or another. Extend the treatment to all PMU MSRs, e.g. to avoid spurious unsupported accesses. Note, the logic can also be used for non-PMU MSRs, but as of today only PMU MSRs can end up being unsupported after KVM told userspace to save and restore them. Link: https://lore.kernel.org/r/20230124234905.3774678-7-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Like Xu
|
e33b6d79ac |
KVM: x86/pmu: Don't tell userspace to save MSRs for non-existent fixed PMCs
Limit the set of MSRs for fixed PMU counters based on the number of fixed counters actually supported by the host so that userspace doesn't waste time saving and restoring dummy values. Signed-off-by: Like Xu <likexu@tencent.com> [sean: split for !enable_pmu logic, drop min(), write changelog] Link: https://lore.kernel.org/r/20230124234905.3774678-6-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Sean Christopherson
|
c3531edc79 |
KVM: x86/pmu: Don't tell userspace to save PMU MSRs if PMU is disabled
Omit all PMU MSRs from the "MSRs to save" list if the PMU is disabled so that userspace doesn't waste time saving and restoring dummy values. KVM provides "error" semantics (read zeros, drop writes) for such known-but- unsupported MSRs, i.e. has fudged around this issue for quite some time. Keep the "error" semantics as-is for now, the logic will be cleaned up in a separate patch. Cc: Aaron Lewis <aaronlewis@google.com> Cc: Weijiang Yang <weijiang.yang@intel.com> Link: https://lore.kernel.org/r/20230124234905.3774678-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Sean Christopherson
|
2374b7310b |
KVM: x86/pmu: Use separate array for defining "PMU MSRs to save"
Move all potential to-be-saved PMU MSRs into a separate array so that a future patch can easily omit all PMU MSRs from the list when the PMU is disabled. No functional change intended. Link: https://lore.kernel.org/r/20230124234905.3774678-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Sean Christopherson
|
e76ae52747 |
KVM: x86/pmu: Gate all "unimplemented MSR" prints on report_ignored_msrs
Add helpers to print unimplemented MSR accesses and condition all such
prints on report_ignored_msrs, i.e. honor userspace's request to not
print unimplemented MSRs. Even though vcpu_unimpl() is ratelimited,
printing can still be problematic, e.g. if a print gets stalled when host
userspace is writing MSRs during live migration, an effective stall can
result in very noticeable disruption in the guest.
E.g. the profile below was taken while calling KVM_SET_MSRS on the PMU
counters while the PMU was disabled in KVM.
- 99.75% 0.00% [.] __ioctl
- __ioctl
- 99.74% entry_SYSCALL_64_after_hwframe
do_syscall_64
sys_ioctl
- do_vfs_ioctl
- 92.48% kvm_vcpu_ioctl
- kvm_arch_vcpu_ioctl
- 85.12% kvm_set_msr_ignored_check
svm_set_msr
kvm_set_msr_common
printk
vprintk_func
vprintk_default
vprintk_emit
console_unlock
call_console_drivers
univ8250_console_write
serial8250_console_write
uart_console_write
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230124234905.3774678-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
|
Sean Christopherson
|
8911ce6669 |
KVM: x86/pmu: Cap kvm_pmu_cap.num_counters_gp at KVM's internal max
Limit kvm_pmu_cap.num_counters_gp during kvm_init_pmu_capability() based on the vendor PMU capabilities so that consuming num_counters_gp naturally does the right thing. This fixes a mostly theoretical bug where KVM could over-report its PMU support in KVM_GET_SUPPORTED_CPUID for leaf 0xA, e.g. if the number of counters reported by perf is greater than KVM's hardcoded internal limit. Incorporating input from the AMD PMU also avoids over-reporting MSRs to save when running on AMD. Link: https://lore.kernel.org/r/20230124234905.3774678-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Kim Phillips
|
8c19b6f257 |
KVM: x86: Propagate the AMD Automatic IBRS feature to the guest
Add the AMD Automatic IBRS feature bit to those being propagated to the guest, and enable the guest EFER bit. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20230124163319.2277355-9-kim.phillips@amd.com |
|
ye xingchen
|
2eb398df77 |
KVM: x86: Replace IS_ERR() with IS_ERR_VALUE()
Avoid type casts that are needed for IS_ERR() and use IS_ERR_VALUE() instead. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202211161718436948912@zte.com.cn Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Aaron Lewis
|
14329b825f |
KVM: x86/pmu: Introduce masked events to the pmu event filter
When building a list of filter events, it can sometimes be a challenge to fit all the events needed to adequately restrict the guest into the limited space available in the pmu event filter. This stems from the fact that the pmu event filter requires each event (i.e. event select + unit mask) be listed, when the intention might be to restrict the event select all together, regardless of it's unit mask. Instead of increasing the number of filter events in the pmu event filter, add a new encoding that is able to do a more generalized match on the unit mask. Introduce masked events as another encoding the pmu event filter understands. Masked events has the fields: mask, match, and exclude. When filtering based on these events, the mask is applied to the guest's unit mask to see if it matches the match value (i.e. umask & mask == match). The exclude bit can then be used to exclude events from that match. E.g. for a given event select, if it's easier to say which unit mask values shouldn't be filtered, a masked event can be set up to match all possible unit mask values, then another masked event can be set up to match the unit mask values that shouldn't be filtered. Userspace can query to see if this feature exists by looking for the capability, KVM_CAP_PMU_EVENT_MASKED_EVENTS. This feature is enabled by setting the flags field in the pmu event filter to KVM_PMU_EVENT_FLAG_MASKED_EVENTS. Events can be encoded by using KVM_PMU_ENCODE_MASKED_ENTRY(). It is an error to have a bit set outside the valid bits for a masked event, and calls to KVM_SET_PMU_EVENT_FILTER will return -EINVAL in such cases, including the high bits of the event select (35:32) if called on Intel. With these updates the filter matching code has been updated to match on a common event. Masked events were flexible enough to handle both event types, so they were used as the common event. This changes how guest events get filtered because regardless of the type of event used in the uAPI, they will be converted to masked events. Because of this there could be a slight performance hit because instead of matching the filter event with a lookup on event select + unit mask, it does a lookup on event select then walks the unit masks to find the match. This shouldn't be a big problem because I would expect the set of common event selects to be small, and if they aren't the set can likely be reduced by using masked events to generalize the unit mask. Using one type of event when filtering guest events allows for a common code path to be used. Signed-off-by: Aaron Lewis <aaronlewis@google.com> Link: https://lore.kernel.org/r/20221220161236.555143-5-aaronlewis@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Paul Durrant
|
f422f853af |
KVM: x86/xen: update Xen CPUID Leaf 4 (tsc info) sub-leaves, if present
The scaling information in subleaf 1 should match the values set by KVM in the 'vcpu_info' sub-structure 'time_info' (a.k.a. pvclock_vcpu_time_info) which is shared with the guest, but is not directly available to the VMM. The offset values are not set since a TSC offset is already applied. The TSC frequency should also be set in sub-leaf 2. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20230106103600.528-3-pdurrant@amazon.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
David Matlack
|
ee661d8ea9 |
KVM: x86: Replace cpu_dirty_logging_count with nr_memslots_dirty_logging
Drop cpu_dirty_logging_count in favor of nr_memslots_dirty_logging. Both fields count the number of memslots that have dirty-logging enabled, with the only difference being that cpu_dirty_logging_count is only incremented when using PML. So while nr_memslots_dirty_logging is not a direct replacement for cpu_dirty_logging_count, it can be combined with enable_pml to get the same information. Signed-off-by: David Matlack <dmatlack@google.com> Link: https://lore.kernel.org/r/20230105214303.2919415-1-dmatlack@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
|
Paolo Bonzini
|
f15a87c006 |
Merge branch 'kvm-lapic-fix-and-cleanup' into HEAD
The first half or so patches fix semi-urgent, real-world relevant APICv and AVIC bugs. The second half fixes a variety of AVIC and optimized APIC map bugs where KVM doesn't play nice with various edge cases that are architecturally legal(ish), but are unlikely to occur in most real world scenarios Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
b3f257a846 |
KVM: x86: Track required APICv inhibits with variable, not callback
Track the per-vendor required APICv inhibits with a variable instead of calling into vendor code every time KVM wants to query the set of required inhibits. The required inhibits are a property of the vendor's virtualization architecture, i.e. are 100% static. Using a variable allows the compiler to inline the check, e.g. generate a single-uop TEST+Jcc, and thus eliminates any desire to avoid checking inhibits for performance reasons. No functional change intended. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230106011306.85230-32-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
2008fab345 |
KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled
Free the APIC access page memslot if any vCPU enables x2APIC and SVM's
AVIC is enabled to prevent accesses to the virtual APIC on vCPUs with
x2APIC enabled. On AMD, if its "hybrid" mode is enabled (AVIC is enabled
when x2APIC is enabled even without x2AVIC support), keeping the APIC
access page memslot results in the guest being able to access the virtual
APIC page as x2APIC is fully emulated by KVM. I.e. hardware isn't aware
that the guest is operating in x2APIC mode.
Exempt nested SVM's update of APICv state from the new logic as x2APIC
can't be toggled on VM-Exit. In practice, invoking the x2APIC logic
should be harmless precisely because it should be a glorified nop, but
play it safe to avoid latent bugs, e.g. with dropping the vCPU's SRCU
lock.
Intel doesn't suffer from the same issue as APICv has fully independent
VMCS controls for xAPIC vs. x2APIC virtualization. Technically, KVM
should provide bus error semantics and not memory semantics for the APIC
page when x2APIC is enabled, but KVM already provides memory semantics in
other scenarios, e.g. if APICv/AVIC is enabled and the APIC is hardware
disabled (via APIC_BASE MSR).
Note, checking apic_access_memslot_enabled without taking locks relies
it being set during vCPU creation (before kvm_vcpu_reset()). vCPUs can
race to set the inhibit and delete the memslot, i.e. can get false
positives, but can't get false negatives as apic_access_memslot_enabled
can't be toggled "on" once any vCPU reaches KVM_RUN.
Opportunistically drop the "can" while updating avic_activate_vmcb()'s
comment, i.e. to state that KVM _does_ support the hybrid mode. Move
the "Note:" down a line to conform to preferred kernel/KVM multi-line
comment style.
Opportunistically update the apicv_update_lock comment, as it isn't
actually used to protect apic_access_memslot_enabled (which is protected
by slots_lock).
Fixes:
|
|
Chao Gao
|
e4aa7f88af |
KVM: Disable CPU hotplug during hardware enabling/disabling
Disable CPU hotplug when enabling/disabling hardware to prevent the
corner case where if the following sequence occurs:
1. A hotplugged CPU marks itself online in cpu_online_mask
2. The hotplugged CPU enables interrupt before invoking KVM's ONLINE
callback
3 hardware_{en,dis}able_all() is invoked on another CPU
the hotplugged CPU will be included in on_each_cpu() and thus get sent
through hardware_{en,dis}able_nolock() before kvm_online_cpu() is called.
start_secondary { ...
set_cpu_online(smp_processor_id(), true); <- 1
...
local_irq_enable(); <- 2
...
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); <- 3
}
KVM currently fudges around this race by keeping track of which CPUs have
done hardware enabling (see commit
|
|
|
Chao Gao
|
aaf12a7b43 |
KVM: Rename and move CPUHP_AP_KVM_STARTING to ONLINE section
The CPU STARTING section doesn't allow callbacks to fail. Move KVM's hotplug callback to ONLINE section so that it can abort onlining a CPU in certain cases to avoid potentially breaking VMs running on existing CPUs. For example, when KVM fails to enable hardware virtualization on the hotplugged CPU. Place KVM's hotplug state before CPUHP_AP_SCHED_WAIT_EMPTY as it ensures when offlining a CPU, all user tasks and non-pinned kernel tasks have left the CPU, i.e. there cannot be a vCPU task around. So, it is safe for KVM's CPU offline callback to disable hardware virtualization at that point. Likewise, KVM's online callback can enable hardware virtualization before any vCPU task gets a chance to run on hotplugged CPUs. Drop kvm_x86_check_processor_compatibility()'s WARN that IRQs are disabled, as the ONLINE section runs with IRQs disabled. The WARN wasn't intended to be a requirement, e.g. disabling preemption is sufficient, the IRQ thing was purely an aggressive sanity check since the helper was only ever invoked via SMP function call. Rename KVM's CPU hotplug callbacks accordingly. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chao Gao <chao.gao@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Yuan Yao <yuan.yao@intel.com> [sean: drop WARN that IRQs are disabled] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-42-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Chao Gao
|
c82a5c5c53 |
KVM: x86: Do compatibility checks when onlining CPU
Do compatibility checks when enabling hardware to effectively add compatibility checks when onlining a CPU. Abort enabling, i.e. the online process, if the (hotplugged) CPU is incompatible with the known good setup. At init time, KVM does compatibility checks to ensure that all online CPUs support hardware virtualization and a common set of features. But KVM uses hotplugged CPUs without such compatibility checks. On Intel CPUs, this leads to #GP if the hotplugged CPU doesn't support VMX, or VM-Entry failure if the hotplugged CPU doesn't support all features enabled by KVM. Note, this is little more than a NOP on SVM, as SVM already checks for full SVM support during hardware enabling. Opportunistically add a pr_err() if setup_vmcs_config() fails, and tweak all error messages to output which CPU failed. Signed-off-by: Chao Gao <chao.gao@intel.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Acked-by: Kai Huang <kai.huang@intel.com> Message-Id: <20221130230934.1014142-41-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
d83420c2d7 |
KVM: x86: Move CPU compat checks hook to kvm_x86_ops (from kvm_x86_init_ops)
Move the .check_processor_compatibility() callback from kvm_x86_init_ops to kvm_x86_ops to allow a future patch to do compatibility checks during CPU hotplug. Do kvm_ops_update() before compat checks so that static_call() can be used during compat checks. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-Id: <20221130230934.1014142-40-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
d419313249 |
KVM: x86: Do VMX/SVM support checks directly in vendor code
Do basic VMX/SVM support checks directly in vendor code instead of implementing them via kvm_x86_ops hooks. Beyond the superficial benefit of providing common messages, which isn't even clearly a net positive since vendor code can provide more precise/detailed messages, there's zero advantage to bouncing through common x86 code. Consolidating the checks will also simplify performing the checks across all CPUs (in a future patch). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-37-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
8d20bd6381 |
KVM: x86: Unify pr_fmt to use module name for all KVM modules
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks use consistent formatting across common x86, Intel, and AMD code. In addition to providing consistent print formatting, using KBUILD_MODNAME, e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and SGX and ...) as technologies without generating weird messages, and without causing naming conflicts with other kernel code, e.g. "SEV: ", "tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems. Opportunistically move away from printk() for prints that need to be modified anyways, e.g. to drop a manual "kvm: " prefix. Opportunistically convert a few SGX WARNs that are similarly modified to WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good that they would fire repeatedly and spam the kernel log without providing unique information in each print. Note, defining pr_fmt yields undesirable results for code that uses KVM's printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's wrappers is relatively limited in KVM x86 code. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20221130230934.1014142-35-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
81a1cf9f89 |
KVM: Drop kvm_arch_check_processor_compat() hook
Drop kvm_arch_check_processor_compat() and its support code now that all architecture implementations are nops. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390 Acked-by: Anup Patel <anup@brainfault.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-Id: <20221130230934.1014142-33-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
3045c483ee |
KVM: x86: Do CPU compatibility checks in x86 code
Move the CPU compatibility checks to pure x86 code, i.e. drop x86's use of the common kvm_x86_check_cpu_compat() arch hook. x86 is the only architecture that "needs" to do per-CPU compatibility checks, moving the logic to x86 will allow dropping the common code, and will also give x86 more control over when/how the compatibility checks are performed, e.g. TDX will need to enable hardware (do VMXON) in order to perform compatibility checks. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-Id: <20221130230934.1014142-32-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
a578a0a9e3 |
KVM: Drop kvm_arch_{init,exit}() hooks
Drop kvm_arch_init() and kvm_arch_exit() now that all implementations are nops. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390 Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Anup Patel <anup@brainfault.org> Message-Id: <20221130230934.1014142-30-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
3af4a9e61e |
KVM: x86: Serialize vendor module initialization (hardware setup)
Acquire a new mutex, vendor_module_lock, in kvm_x86_vendor_init() while doing hardware setup to ensure that concurrent calls are fully serialized. KVM rejects attempts to load vendor modules if a different module has already been loaded, but doesn't handle the case where multiple vendor modules are loaded at the same time, and module_init() doesn't run under the global module_mutex. Note, in practice, this is likely a benign bug as no platform exists that supports both SVM and VMX, i.e. barring a weird VM setup, one of the vendor modules is guaranteed to fail a support check before modifying common KVM state. Alternatively, KVM could perform an atomic CMPXCHG on .hardware_enable, but that comes with its own ugliness as it would require setting .hardware_enable before success is guaranteed, e.g. attempting to load the "wrong" could result in spurious failure to load the "right" module. Introduce a new mutex as using kvm_lock is extremely deadlock prone due to kvm_lock being taken under cpus_write_lock(), and in the future, under under cpus_read_lock(). Any operation that takes cpus_read_lock() while holding kvm_lock would potentially deadlock, e.g. kvm_timer_init() takes cpus_read_lock() to register a callback. In theory, KVM could avoid such problematic paths, i.e. do less setup under kvm_lock, but avoiding all calls to cpus_read_lock() is subtly difficult and thus fragile. E.g. updating static calls also acquires cpus_read_lock(). Inverting the lock ordering, i.e. always taking kvm_lock outside cpus_read_lock(), is not a viable option as kvm_lock is taken in various callbacks that may be invoked under cpus_read_lock(), e.g. x86's kvmclock_cpufreq_notifier(). The lockdep splat below is dependent on future patches to take cpus_read_lock() in hardware_enable_all(), but as above, deadlock is already is already possible. ====================================================== WARNING: possible circular locking dependency detected 6.0.0-smp--7ec93244f194-init2 #27 Tainted: G O ------------------------------------------------------ stable/251833 is trying to acquire lock: ffffffffc097ea28 (kvm_lock){+.+.}-{3:3}, at: hardware_enable_all+0x1f/0xc0 [kvm] but task is already holding lock: ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2a/0xa0 __cpuhp_setup_state+0x2b/0x60 __kvm_x86_vendor_init+0x16a/0x1870 [kvm] kvm_x86_vendor_init+0x23/0x40 [kvm] 0xffffffffc0a4d02b do_one_initcall+0x110/0x200 do_init_module+0x4f/0x250 load_module+0x1730/0x18f0 __se_sys_finit_module+0xca/0x100 __x64_sys_finit_module+0x1d/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (kvm_lock){+.+.}-{3:3}: __lock_acquire+0x16f4/0x30d0 lock_acquire+0xb2/0x190 __mutex_lock+0x98/0x6f0 mutex_lock_nested+0x1b/0x20 hardware_enable_all+0x1f/0xc0 [kvm] kvm_dev_ioctl+0x45e/0x930 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug_lock); lock(kvm_lock); lock(cpu_hotplug_lock); lock(kvm_lock); *** DEADLOCK *** 1 lock held by stable/251833: #0: ffffffffa2456828 (cpu_hotplug_lock){++++}-{0:0}, at: hardware_enable_all+0xf/0xc0 [kvm] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-16-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
4f8396b96a |
KVM: x86: Move guts of kvm_arch_init() to standalone helper
Move the guts of kvm_arch_init() to a new helper, kvm_x86_vendor_init(), so that VMX can do _all_ arch and vendor initialization before calling kvm_init(). Calling kvm_init() must be the _very_ last step during init, as kvm_init() exposes /dev/kvm to userspace, i.e. allows creating VMs. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-14-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
63a1bd8ad1 |
KVM: Drop arch hardware (un)setup hooks
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that all implementations are nops. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390 Acked-by: Anup Patel <anup@brainfault.org> Message-Id: <20221130230934.1014142-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Sean Christopherson
|
b7483387e3 |
KVM: x86: Move hardware setup/unsetup to init/exit
Now that kvm_arch_hardware_setup() is called immediately after
kvm_arch_init(), fold the guts of kvm_arch_hardware_(un)setup() into
kvm_arch_{init,exit}() as a step towards dropping one of the hooks.
To avoid having to unwind various setup, e.g registration of several
notifiers, slot in the vendor hardware setup before the registration of
said notifiers and callbacks. Introducing a functional change while
moving code is less than ideal, but the alternative is adding a pile of
unwinding code, which is much more error prone, e.g. several attempts to
move the setup code verbatim all introduced bugs.
Add a comment to document that kvm_ops_update() is effectively the point
of no return, e.g. it sets the kvm_x86_ops.hardware_enable canary and so
needs to be unwound.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
|
Sean Christopherson
|
1935542a04 |
KVM: x86: Do timer initialization after XCR0 configuration
Move kvm_arch_init()'s call to kvm_timer_init() down a few lines below the XCR0 configuration code. A future patch will move hardware setup into kvm_arch_init() and slot in vendor hardware setup before the call to kvm_timer_init() so that timer initialization (among other stuff) doesn't need to be unwound if vendor setup fails. XCR0 setup on the other hand needs to happen before vendor hardware setup. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Paolo Bonzini
|
fc471e8310 |
Merge branch 'kvm-late-6.1' into HEAD
x86: * Change tdp_mmu to a read-only parameter * Separate TDP and shadow MMU page fault paths * Enable Hyper-V invariant TSC control selftests: * Use TAP interface for kvm_binary_stats_test and tsc_msrs_test Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
Vitaly Kuznetsov
|
2be1bd3a70 |
KVM: x86: Hyper-V invariant TSC control
Normally, genuine Hyper-V doesn't expose architectural invariant TSC
(CPUID.80000007H:EDX[8]) to its guests by default. A special PV MSR
(HV_X64_MSR_TSC_INVARIANT_CONTROL, 0x40000118) and corresponding CPUID
feature bit (CPUID.0x40000003.EAX[15]) were introduced. When bit 0 of the
PV MSR is set, invariant TSC bit starts to show up in CPUID. When the
feature is exposed to Hyper-V guests, reenlightenment becomes unneeded.
Add the feature to KVM. Keep CPUID output intact when the feature
wasn't exposed to L1 and implement the required logic for hiding
invariant TSC when the feature was exposed and invariant TSC control
MSR wasn't written to. Copy genuine Hyper-V behavior and forbid to
disable the feature once it was enabled.
For the reference, for linux guests, support for the feature was added
in commit
|
|
|
Paolo Bonzini
|
a5496886eb |
Merge branch 'kvm-late-6.1-fixes' into HEAD
x86: * several fixes to nested VMX execution controls * fixes and clarification to the documentation for Xen emulation * do not unnecessarily release a pmu event with zero period * MMU fixes * fix Coverity warning in kvm_hv_flush_tlb() selftests: * fixes for the ucall mechanism in selftests * other fixes mostly related to compilation with clang |
|
|
Vitaly Kuznetsov
|
4e5bf89f27 |
KVM: x86: Hyper-V invariant TSC control
Normally, genuine Hyper-V doesn't expose architectural invariant TSC
(CPUID.80000007H:EDX[8]) to its guests by default. A special PV MSR
(HV_X64_MSR_TSC_INVARIANT_CONTROL, 0x40000118) and corresponding CPUID
feature bit (CPUID.0x40000003.EAX[15]) were introduced. When bit 0 of the
PV MSR is set, invariant TSC bit starts to show up in CPUID. When the
feature is exposed to Hyper-V guests, reenlightenment becomes unneeded.
Add the feature to KVM. Keep CPUID output intact when the feature
wasn't exposed to L1 and implement the required logic for hiding
invariant TSC when the feature was exposed and invariant TSC control
MSR wasn't written to. Copy genuine Hyper-V behavior and forbid to
disable the feature once it was enabled.
For the reference, for linux guests, support for the feature was added
in commit
|
|
|
Sean Christopherson
|
77b1908e10 |
KVM: x86: Sanity check inputs to kvm_handle_memory_failure()
Add a sanity check in kvm_handle_memory_failure() to assert that a valid x86_exception structure is provided if the memory "failure" wants to propagate a fault into the guest. If a memory failure happens during a direct guest physical memory access, e.g. for nested VMX, KVM hardcodes the failure to X86EMUL_IO_NEEDED and doesn't provide an exception pointer (because the exception struct would just be filled with garbage). Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221220153427.514032-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Linus Torvalds
|
8fa590bf34 |
ARM64:
* Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
* Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
* Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option,
which multi-process VMMs such as crosvm rely on (see merge commit 382b5b87a97d:
"Fix a number of issues with MTE, such as races on the tags being
initialised vs the PG_mte_tagged flag as well as the lack of support
for VM_SHARED when KVM is involved. Patches from Catalin Marinas and
Peter Collingbourne").
* Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
* Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
* Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
* Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
* Second batch of the lazy destroy patches
* First batch of KVM changes for kernel virtual != physical address support
* Removal of a unused function
x86:
* Allow compiling out SMM support
* Cleanup and documentation of SMM state save area format
* Preserve interrupt shadow in SMM state save area
* Respond to generic signals during slow page faults
* Fixes and optimizations for the non-executable huge page errata fix.
* Reprogram all performance counters on PMU filter change
* Cleanups to Hyper-V emulation and tests
* Process Hyper-V TLB flushes from a nested guest (i.e. from a L2 guest
running on top of a L1 Hyper-V hypervisor)
* Advertise several new Intel features
* x86 Xen-for-KVM:
** Allow the Xen runstate information to cross a page boundary
** Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
** Add support for 32-bit guests in SCHEDOP_poll
* Notable x86 fixes and cleanups:
** One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
** Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few
years back when eliminating unnecessary barriers when switching between
vmcs01 and vmcs02.
** Clean up vmread_error_trampoline() to make it more obvious that params
must be passed on the stack, even for x86-64.
** Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective
of the current guest CPUID.
** Fudge around a race with TSC refinement that results in KVM incorrectly
thinking a guest needs TSC scaling when running on a CPU with a
constant TSC, but no hardware-enumerated TSC frequency.
** Advertise (on AMD) that the SMM_CTL MSR is not supported
** Remove unnecessary exports
Generic:
* Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
* Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
* Fix build errors that occur in certain setups (unsure exactly what is
unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
* Introduce actual atomics for clear/set_bit() in selftests
* Add support for pinning vCPUs in dirty_log_perf_test.
* Rename the so called "perf_util" framework to "memstress".
* Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress tests.
* Add a common ucall implementation; code dedup and pre-work for running
SEV (and beyond) guests in selftests.
* Provide a common constructor and arch hook, which will eventually be
used by x86 to automatically select the right hypercall (AMD vs. Intel).
* A bunch of added/enabled/fixed selftests for ARM64, covering memslots,
breakpoints, stage-2 faults and access tracking.
* x86-specific selftest changes:
** Clean up x86's page table management.
** Clean up and enhance the "smaller maxphyaddr" test, and add a related
test to cover generic emulation failure.
** Clean up the nEPT support checks.
** Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
** Fix an ordering issue in the AMX test introduced by recent conversions
to use kvm_cpu_has(), and harden the code to guard against similar bugs
in the future. Anything that tiggers caching of KVM's supported CPUID,
kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if
the caching occurs before the test opts in via prctl().
Documentation:
* Remove deleted ioctls from documentation
* Clean up the docs for the x86 MSR filter.
* Various fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOaFrcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPemQgAq49excg2Cc+EsHnZw3vu/QWdA0Rt
KhL3OgKxuHNjCbD2O9n2t5di7eJOTQ7F7T0eDm3xPTr4FS8LQ2327/mQePU/H2CF
mWOpq9RBWLzFsSTeVA2Mz9TUTkYSnDHYuRsBvHyw/n9cL76BWVzjImldFtjYjjex
yAwl8c5itKH6bc7KO+5ydswbvBzODkeYKUSBNdbn6m0JGQST7XppNwIAJvpiHsii
Qgpk0e4Xx9q4PXG/r5DedI6BlufBsLhv0aE9SHPzyKH3JbbUFhJYI8ZD5OhBQuYW
MwxK2KlM5Jm5ud2NZDDlsMmmvd1lnYCFDyqNozaKEWC1Y5rq1AbMa51fXA==
=QAYX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a97d: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
|
|
|
Paolo Bonzini
|
9352e7470a |
Merge remote-tracking branch 'kvm/queue' into HEAD
x86 Xen-for-KVM: * Allow the Xen runstate information to cross a page boundary * Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured * add support for 32-bit guests in SCHEDOP_poll x86 fixes: * One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). * Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. * Clean up the MSR filter docs. * Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. * Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. * Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. * Advertise (on AMD) that the SMM_CTL MSR is not supported * Remove unnecessary exports Selftests: * Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. * Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). * Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. * Introduce actual atomics for clear/set_bit() in selftests Documentation: * Remove deleted ioctls from documentation * Various fixes |
|
|
Paolo Bonzini
|
eb5618911a |
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on. - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Add/Enable/Fix a bunch of selftests covering memslots, breakpoints, stage-2 faults and access tracking. You name it, we got it, we probably broke it. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. As a side effect, this tag also drags: - The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring series - A shared branch with the arm64 tree that repaints all the system registers to match the ARM ARM's naming, and resulting in interesting conflicts -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmOODb0PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDztsQAInRnsgLl57/SpqhZzExNCllN6AT/bdeB3uz rnw3ScJOV174uNKp8lnPWoTvu2YUGiVtBp6tFHhDI8le7zHX438ZT8KE5mcs8p5i KfFKnb8SHV2DDpqkcy24c0Xl/6vsg1qkKrdfJb49yl5ZakRITDpynW/7tn6dXsxX wASeGFdCYeW4g2xMQzsCbtx6LgeQ8uomBmzRfPrOtZHYYxAn6+4Mj4595EC1sWxM AQnbp8tW3Vw46saEZAQvUEOGOW9q0Nls7G21YqQ52IA+ZVDK1LmAF2b1XY3edjkk pX8EsXOURfqdasBxfSfF3SgnUazoz9GHpSzp1cTVTktrPp40rrT7Ldtml0ktq69d 1malPj47KVMDsIq0kNJGnMxciXFgAHw+VaCQX+k4zhIatNwviMbSop2fEoxj22jc 4YGgGOxaGrnvmAJhreCIbr4CkZk5CJ8Zvmtfg+QM6npIp8BY8896nvORx/d4i6tT H4caadd8AAR56ANUyd3+KqF3x0WrkaU0PLHJLy1tKwOXJUUTjcpvIfahBAAeUlSR qEFrtb+EEMPgAwLfNOICcNkPZR/yyuYvM+FiUQNVy5cNiwFkpztpIctfOFaHySGF K07O2/a1F6xKL0OKRUg7hGKknF9ecmux4vHhiUMuIk9VOgNTWobHozBDorLKXMzC aWa6oGVC =iIPT -----END PGP SIGNATURE----- Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.2 - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on. - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Add/Enable/Fix a bunch of selftests covering memslots, breakpoints, stage-2 faults and access tracking. You name it, we got it, we probably broke it. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. As a side effect, this tag also drags: - The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring series - A shared branch with the arm64 tree that repaints all the system registers to match the ARM ARM's naming, and resulting in interesting conflicts |
|
Marc Zyngier
|
a937f37d85 |
Merge branch kvm-arm64/dirty-ring into kvmarm-master/next
* kvm-arm64/dirty-ring: : . : Add support for the "per-vcpu dirty-ring tracking with a bitmap : and sprinkles on top", courtesy of Gavin Shan. : : This branch drags the kvmarm-fixes-6.1-3 tag which was already : merged in 6.1-rc4 so that the branch is in a working state. : . KVM: Push dirty information unconditionally to backup bitmap KVM: selftests: Automate choosing dirty ring size in dirty_log_test KVM: selftests: Clear dirty ring states between two modes in dirty_log_test KVM: selftests: Use host page size to map ring buffer in dirty_log_test KVM: arm64: Enable ring-based dirty memory tracking KVM: Support dirty ring in conjunction with bitmap KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL Signed-off-by: Marc Zyngier <maz@kernel.org> |
|
|
Paolo Bonzini
|
5656374b16 |
Merge branch 'gpc-fixes' of git://git.infradead.org/users/dwmw2/linux into HEAD
Pull Xen-for-KVM changes from David Woodhouse: * add support for 32-bit guests in SCHEDOP_poll * the rest of the gfn-to-pfn cache API cleanup "I still haven't reinstated the last of those patches to make gpc->len immutable." Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |