-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmktxl0ACgkQiiy9cAdy
T1HI7AwAtnKyyIWfKwSnsGNTTc3LrT6ucx0DpCw1tqU7TBDLJtNPbQlgzL2rNCiv
cL6TTxn+qWTLfgJChQnypsCpoiQXwtqNBpfxQaoCOcwG+fUaa9G1JXxEmgv/Ob7j
KTrYHrnPS6YCQMDLMrEJh8tnI9jHcTgLtYCtDC+psYRzcbs/8Wfgs1Ek/vKW5Ui1
u0nKYf189KZA9UErTY7NhizyYNkifKD0n+DQPzR1FH6JWusWNRtj9MZPgoEsexXK
NxfDoc8krWwM7O+6X10ER7Snzd9EUtnbgwIqCFhDS6igfz+w+7Hm/XevOhK+DQqX
ApmFZL3n6yEUCnOZTQCqHutlChu1j8gWmEAnoGSmBJ3y99NvNqxBfedGDA8DGgFM
wkX6bxCJjpBMrMeLqVv0QXaXLkRycZASz5zVgb/ly3Zu6DnDlFzRYFUBNvXHb+M/
WFMtzV2Jzd4I09J460b0qU18iuSVxxyJNGVp6xzo++zdNUSt07UYXK/R7NCIaCXO
buCHlQll
=QmyI
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rc-smb-fixes' of git://git.samba.org/ksmbd
Pull smb client and server updates from Steve French:
- server fixes:
- IPC use after free locking fix
- fix locking bug in delete paths
- fix use after free in disconnect
- fix underflow in locking check
- error mapping improvement
- socket listening improvement
- return code mapping fixes
- crypto improvements (use default libraries)
- cleanup patches:
- netfs
- client checkpatch cleanup
- server cleanup
- move server/client duplicate code to common code
- fix some defines to better match protocol specification
- smbdirect (RDMA) fixes
- client debugging improvements for leases
* tag 'v6.19-rc-smb-fixes' of git://git.samba.org/ksmbd: (44 commits)
cifs: Use netfs_alloc/free_folioq_buffer()
smb: client: show smb lease key in open_dirs output
smb: client: show smb lease key in open_files output
ksmbd: ipc: fix use-after-free in ipc_msg_send_request
smb: client: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smbd_conn_upcall()
smb: server: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smb_direct_cm_handler()
smb: smbdirect: introduce SMBDIRECT_CHECK_STATUS_{WARN,DISCONNECT}()
smb: smbdirect: introduce SMBDIRECT_DEBUG_ERR_PTR() helper
ksmbd: vfs: fix race on m_flags in vfs_cache
ksmbd: Replace strcpy + strcat to improve convert_to_nt_pathname
smb: move FILE_SYSTEM_ATTRIBUTE_INFO to common/fscc.h
ksmbd: implement error handling for STATUS_INFO_LENGTH_MISMATCH in smb server
ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency
ksmbd: server: avoid busy polling in accept loop
smb: move create_durable_reconn to common/smb2pdu.h
smb: fix some warnings reported by scripts/checkpatch.pl
smb: do some cleanups
smb: move FILE_SYSTEM_SIZE_INFO to common/fscc.h
smb: move some duplicate struct definitions to common/fscc.h
smb: move list of FileSystemAttributes to common/fscc.h
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
op9tAQCJ//STOkvYHfqgsdRD+cW9MRg/gPzfVZgnV1FTyf8sMgEA0IsY5zCZB9eh
9FdD0E57P8PlWRwWZ+LktnWBzRAUqwI=
=MOVR
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory locking updates from Christian Brauner:
"This contains the work to add centralized APIs for directory locking
operations.
This series is part of a larger effort to change directory operation
locking to allow multiple concurrent operations in a directory. The
ultimate goal is to lock the target dentry(s) rather than the whole
parent directory.
To help with changing the locking protocol, this series centralizes
locking and lookup in new helper functions. The helpers establish a
pattern where it is the dentry that is being locked and unlocked
(currently the lock is held on dentry->d_parent->d_inode, but that can
change in the future).
This also changes vfs_mkdir() to unlock the parent on failure, as well
as dput()ing the dentry. This allows end_creating() to only require
the target dentry (which may be IS_ERR() after vfs_mkdir()), not the
parent"
* tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nfsd: fix end_creating() conversion
VFS: introduce end_creating_keep()
VFS: change vfs_mkdir() to unlock on failure.
ecryptfs: use new start_creating/start_removing APIs
Add start_renaming_two_dentries()
VFS/ovl/smb: introduce start_renaming_dentry()
VFS/nfsd/ovl: introduce start_renaming() and end_renaming()
VFS: add start_creating_killable() and start_removing_killable()
VFS: introduce start_removing_dentry()
smb/server: use end_removing_noperm for for target of smb2_create_link()
VFS: introduce start_creating_noperm() and start_removing_noperm()
VFS/nfsd/cachefiles/ovl: introduce start_removing() and end_removing()
VFS/nfsd/cachefiles/ovl: add start_creating() and end_creating()
VFS: tidy up do_unlinkat()
VFS: introduce start_dirop() and end_dirop()
debugfs: rename end_creating() to debugfs_end_creating()
Add STATUS_INFO_LENGTH_MISMATCH mapping to EMSGSIZE.
Currently, STATUS_INFO_LENGTH_MISMATCH has no mapping to any error code,
making it difficult to distinguish between invalid parameters and length
mismatch.
Map STATUS_INFO_LENGTH_MISMATCH to EMSGSIZE while keeping the EINVAL for
invalid parameters. Although the buf_len check only checks for buf_size
being less than required, there was no error code for lower buf_size.
Hence, EMSGSIZE is used.
Signed-off-by: Aaditya Kansal <aadityakansal390@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Under high concurrency, A tree-connection object (tcon) is freed on
a disconnect path while another path still holds a reference and later
executes *_put()/write on it.
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Reported-by: Zhitong Liu <liuzhitong1993@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The fields in struct create_durable_reconn_req and struct create_durable
are exactly the same, so remove create_durable_reconn_req from server,
and use typedef to define both create_durable_req_t and
create_durable_reconn_t for a single struct.
Rename the following places:
- struct create_durable -> create_durable_req_t
- struct create_durable_reconn_req -> create_durable_reconn_t
The documentation references are:
- SMB2_CREATE_DURABLE_HANDLE_REQUEST in MS-SMB2 2.2.13.2.3
- SMB2_CREATE_DURABLE_HANDLE_RECONNECT in MS-SMB2 2.2.13.2.4
- SMB2_FILEID in MS-SMB2 2.2.14.1
Descriptions of the struct fields:
- __u8 Reserved[16]: DurableRequest field of SMB2_CREATE_DURABLE_HANDLE_REQUEST.
A 16-byte field that MUST be reserved.
- __u64 PersistentFileId: Persistent field of 2.2.14.1 SMB2_FILEID
- __u64 VolatileFileId: Volatile field of 2.2.14.1 SMB2_FILEID
- struct Fid: Data field of SMB2_CREATE_DURABLE_HANDLE_RECONNECT.
An SMB2_FILEID structure, as specified in section 2.2.14.1.
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Rename the following places:
- struct filesystem_info -> FILE_SYSTEM_SIZE_INFO
- FILE_SYSTEM_INFO -> FILE_SYSTEM_SIZE_INFO
- FreeAllocationUnits -> AvailableAllocationUnits: consistent with MS-FSCC 2.5.8
Then move duplicate definitions to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Modify the following places:
- smb2_file_ntwrk_info -> smb2_file_network_open_info
- struct filesystem_device_info -> FILE_SYSTEM_DEVICE_INFO
- struct file_directory_info -> FILE_DIRECTORY_INFO
- struct file_full_directory_info -> FILE_FULL_DIRECTORY_INFO
- struct file_both_directory_info -> FILE_BOTH_DIRECTORY_INFO
- struct file_id_full_dir_info -> FILE_ID_FULL_DIR_INFO
- struct filesystem_posix_info -> FILE_SYSTEM_POSIX_INFO
The fields of these structures are exactly the same on both client and
server, so move duplicate definitions to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to maintain the code more easily, move duplicate definitions to
common header file.
There are only 4 different definitions, the client uses cpu_to_le16()
but the server does not:
- RSS_CAPABLE
- RDMA_CAPABLE
- INTERNETWORK
- INTERNETWORKV6
The other definitions are exactly the same on both client and server.
The struct smb_hdr is defined in MS-CIFS and MS-SMB, but it's also used by
SMB2 and SMB3, so move it to the common smb2pdu.h.
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Modify the following places:
- some fields in "struct create_durable_reconn_v2_req" ->
struct durable_reconnect_context_v2
- create_durable_reconn_v2_req -> create_durable_handle_reconnect_v2
Then move duplicate definitions to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Modify the following places:
- some fields in "struct create_durable_req_v2" ->
struct durable_context_v2
- durable_context_v2 -> durable_context_v2_req
- create_durable_v2 -> create_durable_req_v2
Then move duplicate definitions to common header file.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Rename 2 places:
- resume_key_req -> resume_key_ioctl_rsp
- server: ResumeKey -> ResumeKeyU64
Merge the struct members of the server and the client, then move duplicate
definitions to common header file.
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Rename 3 places:
- copychunk_ioctl -> copychunk_ioctl_req
- copychunk -> srv_copychunk
- server: ResumeKey -> SourceKeyU64
Merge the struct members of the server and the client, then move duplicate
definitions to common header file.
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Merge the struct members of the server and the client:
- req_capabilities: from client
- header_preamble_size: from client
- cap_unicode: from client
- capabilities: from server, rename to req_capabilities
- max_read_size: from server
- max_write_size: from server
- max_trans_size: from server
- max_credits: from server
- create_durable_size: from server
- create_durable_v2_size: from server
- create_mxac_size: from server
- create_disk_id_size: from server
- create_posix_size: from server
Then move duplicate definitions to common header file.
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
These functions return error code rather than always returning 0.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_oplock_break() should return error code when an error occurs,
__process_request() will print the error messages.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
__process_request() will not print error messages if smb2_ioctl()
always returns 0.
Fix this by returning the correct value at the end of function.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
__process_request() will not print error messages if smb2_query_dir()
always returns 0.
Fix this by returning the correct value at the end of function.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_notify() should return error code when an error occurs,
__process_request() will print the error messages.
I may implement the SMB2 CHANGE_NOTIFY response (see MS-SMB2 2.2.36)
in the future.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
STATUS_END_OF_FILE maps to the linux error -ENODATA. Perhaps in the future
we can move client/smb2maperror.c into common/ and then call
map_smb2_to_linux_error() to get the linux error.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert ksmbd_sign_smb2_pdu() and generate_key() to use the HMAC-SHA256
library instead of a "hmac(sha256)" crypto_shash. This is simpler and
faster. With the library there's no need to allocate memory, no need to
handle errors, and the HMAC-SHA256 code is accessed directly without
inefficient indirect calls and other unnecessary API overhead.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Sometimes smb2_create_link() needs to remove the target before creating
the link.
It uses ksmbd_vfs_kern_locked(), and is the only user of that interface.
To match the new naming, that function is changed to
ksmbd_vfs_kern_start_removing(), and related functions or flags are also
renamed.
The lock actually happens in ksmbd_vfs_path_lookup() and that is changed
to use start_removing_noperm() - permission to perform lookup in the
parent was already checked in vfs_path_parent_lookup().
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-8-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit 305853cce3 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
Fixes: 305853cce3 ("ksmbd: Fix race condition in RPC handle list access")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reference count of ksmbd_session will leak when session need reconnect.
Fix this by adding the missing ksmbd_user_session_put().
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Memory leak occurs when ksmbd_vfs_read() fails.
Fix this by adding the missing kvfree().
Co-developed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace connection list with hash table to improve lookup performance.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If client doesn't negotiate with SMB3.1.1 POSIX Extensions,
then proper error code won't be returned due to overwriting.
Return error immediately.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We should use the per connection value.
And for TCP return NT_STATUS_INVALID_PARAMETER if any
SMB2_CHANNEL_RDMA_V1* is used.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Meetakshi Setiya <meetakshisetiyaoss@gmail.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the client sends SMB2_CREATE_POSIX_CONTEXT to ksmbd, allow the filename
to contain a colon (':'). This requires disabling the support for Alternate
Data Streams (ADS), which are denoted by a colon-separated suffix to the
filename on Windows. This should not be an issue, since this concept is not
known to POSIX anyway and the client has to explicitly request a POSIX
context to get this behavior.
Link: https://lore.kernel.org/all/f9401718e2be2ab22058b45a6817db912784ef61.camel@rx2.rx-server.de/
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
If client send multiple session setup requests to ksmbd,
Preauh_HashValue race condition could happen.
There is no need to free sess->Preauh_HashValue at session setup phase.
It can be freed together with session at connection termination phase.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27661
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
xa_store() may fail so check its return value and return error code if
error occurred.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If client send two session setups with krb5 authenticate to ksmbd,
null pointer dereference error in generate_encryptionkey could happen.
sess->Preauth_HashValue is set to NULL if session is valid.
So this patch skip generate encryption key if session is valid.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27654
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The function ksmbd_vfs_kern_path_locked() seems to serve two functions
and as a result has an odd interface.
On success it returns with the parent directory locked and with write
access on that filesystem requested, but it may have crossed over a
mount point to return the path, which makes the lock and the write
access irrelevant.
This patches separates the functionality into two functions:
- ksmbd_vfs_kern_path() does not lock the parent, does not request
write access, but does cross mount points
- ksmbd_vfs_kern_path_locked() does not cross mount points but
does lock the parent and request write access.
The parent_path parameter is no longer needed. For the _locked case
the final path is sufficient to drop write access and to unlock the
parent (using path->dentry->d_parent which is safe while the lock is
held).
There were 3 caller of ksmbd_vfs_kern_path_locked().
- smb2_create_link() needs to remove the target if it existed and
needs the lock and the write-access, so it continues to use
ksmbd_vfs_kern_path_locked(). It would not make sense to
cross mount points in this case.
- smb2_open() is the only user that needs to cross mount points
and it has no need for the lock or write access, so it now uses
ksmbd_vfs_kern_path()
- smb2_creat() does not need to cross mountpoints as it is accessing
a file that it has just created on *this* filesystem. But also it
does not need the lock or write access because by the time
ksmbd_vfs_kern_path_locked() was called it has already created the
file. So it could use either interface. It is simplest to use
ksmbd_vfs_kern_path().
ksmbd_vfs_kern_path_unlock() is still needed after
ksmbd_vfs_kern_path_locked() but it doesn't require the parent_path any
more. After a successful call to ksmbd_vfs_kern_path(), only path_put()
is needed to release the path.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smb2_create_link() is called with ReplaceIfExists set and the name
does exist then a deadlock will happen.
ksmbd_vfs_kern_path_locked() will return with success and the parent
directory will be locked. ksmbd_vfs_remove_file() will then remove the
file. ksmbd_vfs_link() will then be called while the parent is still
locked. It will try to lock the same parent and will deadlock.
This patch moves the ksmbd_vfs_kern_path_unlock() call to *before*
ksmbd_vfs_link() and then simplifies the code, removing the file_present
flag variable.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In process_query_dir_entries(), instead of locking the directory,
performing a lookup, then unlocking, we can simply call
lookup_one_unlocked(). That takes locks the directory only when needed.
This removes the only users of lock_dir() and unlock_dir() so they can
be removed.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit cc34acd577 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If ksmbd_iov_pin_rsp return error, use-after-free can happen by
accessing opinfo->state and opinfo_put and ksmbd_fd_put could
called twice.
Reported-by: Ziyan Xu <research@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The bug only appears when:
- windows 11 copies a file that has an alternate data stream
- streams_xattr is enabled on the share configuration.
Microsoft Edge adds a ZoneIdentifier data stream containing the URL
for files it downloads.
Another way to create a test file:
- open cmd.exe
- echo "hello from default data stream" > hello.txt
- echo "hello again from ads" > hello.txt:ads.txt
If you open the file using notepad, we'll see the first message.
If you run "notepad hello.txt:ads.txt" in cmd.exe, we should see
the second message.
dir /s /r should least all streams for the file.
The truncation happens because the windows 11 client sends
a SetInfo/EndOfFile message on the ADS, but it is instead applied
on the main file, because we don't check fp->stream.
When receiving set/get info file for a stream file, Change to process
requests using stream position and size.
Truncate is unnecessary for stream files, so we skip
set_file_allocation_info and set_end_of_file_info operations.
Reported-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If client set ->PreviousSessionId on kerberos session setup stage,
NULL pointer dereference error will happen. Since sess->user is not
set yet, It can pass the user argument as NULL to destroy_previous_session.
sess->user will be set in ksmbd_krb5_authenticate(). So this patch move
calling destroy_previous_session() after ksmbd_krb5_authenticate().
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27391
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=DKRi
-----END PGP SIGNATURE-----
Merge tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
"Four smb3 server fixes:
- Fix for special character handling when mounting with "posix"
- Fix for mounts from Mac for fs that don't provide unique inode
numbers
- Two cleanup patches (e.g. for crypto calls)"
* tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: allow a filename to contain special characters on SMB3.1.1 posix extension
ksmbd: provide zero as a unique ID to the Mac client
ksmbd: remove unnecessary softdep on crc32
ksmbd: use SHA-256 library API instead of crypto_shash API
If client send SMB2_CREATE_POSIX_CONTEXT to ksmbd, Allow a filename
to contain special characters.
Reported-by: Philipp Kerling <pkerling@casix.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The Mac SMB client code seems to expect the on-disk file identifier
to have the semantics of HFS+ Catalog Node Identifier (CNID).
ksmbd provides the inode number as a unique ID to the client,
but in the case of subvolumes of btrfs, there are cases where different
files have the same inode number, so the mac smb client treats it
as an error. There is a report that a similar problem occurs
when the share is ZFS.
Returning UniqueId of zero will make the Mac client to stop using and
trusting the file id returned from the server.
Reported-by: Justin Turner Arthur <justinarthur@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBN6wAKCRCRxhvAZXjc
ok32AQD9DTiSCAoVg+7s+gSBuLTi8drPTN++mCaxdTqRh5WpRAD9GVyrGQT0s6LH
eo9bm8d1TAYjilEWM0c0K0TxyQ7KcAA=
=IW7H
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs directory lookup updates from Christian Brauner:
"This contains cleanups for the lookup_one*() family of helpers.
We expose a set of functions with names containing "lookup_one_len"
and others without the "_len". This difference has nothing to do with
"len". It's rater a historical accident that can be confusing.
The functions without "_len" take a "mnt_idmap" pointer. This is found
in the "vfsmount" and that is an important question when choosing
which to use: do you have a vfsmount, or are you "inside" the
filesystem. A related question is "is permission checking relevant
here?".
nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
functions. They pass nop_mnt_idmap and refuse to work on filesystems
which have any other idmap.
This work changes nfsd and cachefile to use the lookup_one family of
functions and to explictily pass &nop_mnt_idmap which is consistent
with all other vfs interfaces used where &nop_mnt_idmap is explicitly
passed.
The remaining uses of the "_one" functions do not require permission
checks so these are renamed to be "_noperm" and the permission
checking is removed.
This series also changes these lookup function to take a qstr instead
of separate name and len. In many cases this simplifies the call"
* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: change lookup_one_common and lookup_noperm_common to take a qstr
Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
VFS: rename lookup_one_len family to lookup_noperm and remove permission check
cachefiles: Use lookup_one() rather than lookup_one_len()
nfsd: Use lookup_one() rather than lookup_one_len()
VFS: improve interface for lookup_one functions
Client can send empty newname string to ksmbd server.
It will cause a kernel oops from d_alloc.
This patch return the error when attempting to rename
a file or directory with an empty new name string.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The sess->user object can currently be in use by another thread, for
example if another connection has sent a session setup request to
bind to the session being free'd. The handler for that connection could
be in the smb2_sess_setup function which makes use of sess->user.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
xa_store() may fail so check its return value and return error code if
error occurred.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds
ChenXiaoSong
Aaditya Kansal
Namjae Jeon
ZhangGuoDong
Eric Biggers
NeilBrown
Marios Makassikis
Matvey Kovalev
Stefan Metzmacher
Philipp Kerling
Stanislav Fomichev
Sean Heelan
Salah Triki