Add selftests for both atomic replace and non atomic replace
livepatches. The result is as follows,
TEST: sysfs test ... ok
TEST: sysfs test object/patched ... ok
TEST: sysfs test replace enabled ... ok
TEST: sysfs test replace disabled ... ok
Suggested-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Tested-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20240625151123.2750-3-laoar.shao@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add testcase where 7th argument is struct for architectures with 8 argument
registers, and increase the complexity of the struct.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-4-pulehui@huaweicloud.com
Factor out many args tests from tracing_struct and rename some function names
to make more sense. Meanwhile, remove unnecessary skeleton detach operation
as it will be covered by skeleton destroy operation.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-3-pulehui@huaweicloud.com
Introduce dynamic adjustment capabilities for fill_size and comp_size
parameters to support larger batch sizes beyond the previous 2K limit.
Update HW_SW_MAX_RING_SIZE test cases to evaluate AF_XDP's robustness by
pushing hardware and software ring sizes to their limits. This test
ensures AF_XDP's reliability amidst potential producer/consumer throttling
due to maximum ring utilization.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240702055916.48071-3-tushar.vyavahare@intel.com
Previously, HW_SW_MIN_RING_SIZE and HW_SW_MAX_RING_SIZE test cases were
not validating Tx/Rx traffic at all due to early return after changing HW
ring size in testapp_validate_traffic().
Fix the flow by checking return value of set_ring_size() and act upon it
rather than terminating the test case there.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240702055916.48071-2-tushar.vyavahare@intel.com
- Fix no cxl_nvd during pmem region auto-assemble
- Avoid NULLL pointer dereference in region lookup
- Add missing checks to interleave capability
- Add cxl kdoc fix to address document compilation error
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmaC5f0ACgkQYGjFFmlT
OEpjug/8DxnDA/hxi45kQHz0iwtMNFPv87qpC5MQ5XEXG0RLY4xka5UI7SKDPuo8
JZGWCi/wObUU0iAtG9tBji3aMkx9BM0PYj3LIMkQaZccUtS47xgzQius4c4KpPCC
gGDGEXc1oMVIIBzh7/ZXU6PTd4a3+8c6DZoSIUEyyt1j72R8ef9lans/w4Dl39FI
c+SVE4GdlnVe5/34CUTe+It8vn8bV/a9YXwjadIuXnOFxsPym2CdeADssj8IZUOS
pmDU5CdGPJAnL9jT+/NtuY312wrGi7ImxhLtD9/3pJhluqs/OMW4OWcIgDoDAP13
Ndn/eLoO2zgZtVAoCeMMuEQcRBZGwCcrIbN1CBVJ2HR+n6XlO7ICmABcOoZvhG0b
wdK6ukNnWLoP0xXRpqYWcTsGfjWTadKqom1hs6jJqMeJcK8HcQNzb8xNzoXdk0QR
wT8AKYRupwQuAY90mSp4aAlo8aJypAXB6tJzzp05QcgbTd+uif0STiiOzkG9FCAE
1v1snUjjkrIjUwODzX4Me2xw0AxSZdOvk//5mKB3fSQdXYxQUNfRunAI02qIM+8M
XPM/QxA+DeJEyD8BTnDo5J5SK5XhoMHaCPrOPYMm5bPYKS0TxHHCY4tMRAQTfhW+
QVcbkqi+WSAvVibl0OcwYmR64TnGMtCwhQrPFqaX+aWBpvhc+1c=
=6MV8
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Fix no cxl_nvd during pmem region auto-assemble
- Avoid NULLL pointer dereference in region lookup
- Add missing checks to interleave capability
- Add cxl kdoc fix to address document compilation error
* tag 'cxl-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: documentation: add missing files to cxl driver-api
cxl/region: check interleave capability
cxl/region: Avoid null pointer dereference in region lookup
cxl/mem: Fix no cxl_nvd during pmem region auto-assembling
In the same way than commit ae7487d112 ("selftests/hid: ensure we can
compile the tests on kernels pre-6.3") we should expose struct hid_bpf_ops
when it's not available in vmlinux.h.
So unexpose an eventual struct hid_bpf_ops, include vmlinux.h, and
re-export struct hid_bpf_ops.
Fixes: d7696738d6 ("selftests/hid: convert the hid_bpf selftests with struct_ops")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202406270328.bscLN1IF-lkp@intel.com/
Link: https://patch.msgid.link/20240701-fix-cki-v2-1-20564e2e1393@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Building the sigaltstack test with GCC on 64-bit powerpc errors with:
gcc -Wall sas.c -o /home/michael/linux/.build/kselftest/sigaltstack/sas
In file included from sas.c:23:
current_stack_pointer.h:22:2: error: #error "implement current_stack_pointer equivalent"
22 | #error "implement current_stack_pointer equivalent"
| ^~~~~
sas.c: In function ‘my_usr1’:
sas.c:50:13: error: ‘sp’ undeclared (first use in this function); did you mean ‘p’?
50 | if (sp < (unsigned long)sstack ||
| ^~
This happens because GCC doesn't define __ppc__ for 64-bit builds, only
32-bit builds. Instead use __powerpc__ to detect powerpc builds, which
is defined by clang and GCC for 64-bit and 32-bit builds.
Fixes: 05107edc91 ("selftests: sigaltstack: fix -Wuninitialized")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240520062647.688667-1-mpe@ellerman.id.au
-----BEGIN PGP SIGNATURE-----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=0BtN
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
nolibc gained an implementation of strerror() recently.
Use it and drop the ifdeffery.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
strerror() is commonly used.
For example in kselftest which currently needs to do an #ifdef NOLIBC to
handle the lack of strerror().
Keep it simple and reuse the output format of perror() for strerror().
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Some tests only make sense on nolibc. To avoid gaps in the test numbers
do to inline "#ifdef NOLIBC", add a condition to formally skip these
tests.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The implementation always works on uintmax_t values.
This is inefficient when only 32bit are needed.
However for all functions this only happens for strtol() on 32bit
platforms.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240425-nolibc-strtol-v1-2-bfeef7846902@weissschuh.net
run-tests.sh hides the output from the compiler unless the compilation
fails. To recognize newly introduced warnings use -Werror by default.
Also add a switch to disable -Werror in case the warnings are expected.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240423-nolibc-werror-v1-1-e6f0bd66eb45@weissschuh.net
On musl calls to brk() and sbrk() always fail with ENOMEM.
Detect this and skip the tests on musl.
Tested on glibc 2.39 and musl 1.2.5 in addition to nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240424-nolibc-musl-brk-v1-1-b49882dd9a93@weissschuh.net
Userspace builds of the radix-tree testing suite fails because of patch
KUnit: add missing MODULE_DESCRIPTION() macros for lib/test_*.ko. Add the
proper defines to tools/testing/radix-tree/idr-test.c so
MODULE_DESCRIPTION has a definition. This allows the build to succeed.
Link: https://lkml.kernel.org/r/20240626232100.306130-1-sidhartha.kumar@oracle.com
Fixes: f069e33daf ("KUnit: add missing MODULE_DESCRIPTION() macros for lib/test_*.ko")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This implements what I was describing in [1]. When writing a test
author can schedule cleanup / undo actions right after the creation
completes, eg:
cmd("touch /tmp/file")
defer(cmd, "rm /tmp/file")
defer() takes the function name as first argument, and the rest are
arguments for that function. defer()red functions are called in
inverse order after test exits. It's also possible to capture them
and execute earlier (in which case they get automatically de-queued).
undo = defer(cmd, "rm /tmp/file")
# ... some unsafe code ...
undo.exec()
As a nice safety all exceptions from defer()ed calls are captured,
printed, and ignored (they do make the test fail, however).
This addresses the common problem of exceptions in cleanup paths
often being unhandled, leading to potential leaks.
There is a global action queue, flushed by ksft_run(). We could support
function level defers too, I guess, but there's no immediate need..
Link: https://lore.kernel.org/all/877cedb2ki.fsf@nvidia.com/ # [1]
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exception handlers print the result and use continue
to skip the non-exception result printing. This makes
inserting common post-test code hard. Refactor to
avoid the continues and have only one ktap_result() call.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the existing test to exercise UDP GSO egress through devices with
various offload capabilities, including lack of checksum offload, which is
the default case for TUN/TAP devices.
Test against a dummy device because it is simpler to set up then TUN/TAP.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626-linux-udpgso-v2-2-422dfcbd6b48@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test if KVM emulates the APIC bus clock at the expected frequency when
userspace configures the frequency via KVM_CAP_X86_APIC_BUS_CYCLES_NS.
Set APIC timer's initial count to the maximum value and busy wait for 100
msec (largely arbitrary) using the TSC. Read the APIC timer's "current
count" to calculate the actual APIC bus clock frequency based on TSC
frequency.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/2fccf35715b5ba8aec5e5708d86ad7015b8d74e6.1718214999.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add udelay() for x86 tests to allow busy waiting in the guest for a
specific duration, and to match ARM and RISC-V's udelay() in the hopes
of eventually making udelay() available on all architectures.
Get the guest's TSC frequency using KVM_GET_TSC_KHZ and expose it to all
VMs via a new global, guest_tsc_khz. Assert that KVM_GET_TSC_KHZ returns
a valid frequency, instead of simply skipping tests, which would require
detecting which tests actually need/want udelay(). KVM hasn't returned an
error for KVM_GET_TSC_KHZ since commit cc578287e3 ("KVM: Infrastructure
for software and hardware based TSC rate scaling"), which predates KVM
selftests by 6+ years (KVM_GET_TSC_KHZ itself predates KVM selftest by 7+
years).
Note, if the GUEST_ASSERT() in udelay() somehow fires and the test doesn't
check for guest asserts, then the test will fail with a very cryptic
message. But fixing that, e.g. by automatically handling guest asserts,
is a much larger task, and practically speaking the odds of a test afoul
of this wart are infinitesimally small.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/5aa86285d1c1d7fe1960e3fe490f4b22273977e6.1718214999.git.reinette.chatre@intel.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure that a dead thread leader doesn't prevent installing new filters
with SECCOMP_FILTER_FLAG_TSYNC from other threads.
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20240628021014.231976-5-avagin@google.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Add a new test case to check that SECCOMP_IOCTL_NOTIF_RECV returns when all
tasks have gone.
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://lore.kernel.org/r/20240628021014.231976-4-avagin@google.com
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Kees Cook <kees@kernel.org>
commit a9af47e382 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
added tests covering edge cases in the boundaries of iova bitmap. Although
it used buffer sizes thinking in PAGE_SIZE (4K) as opposed to the
MOCK_PAGE_SIZE (2K) that is used in iommufd mock selftests. This meant that
isn't correctly exercising everything specifically the u32 and 4K bitmap
test cases. Fix selftests buffer sizes to be based on mock page size.
Link: https://lore.kernel.org/r/20240627110105.62325-5-joao.m.martins@oracle.com
Reported-by: Kevin Tian <kevin.tian@intel.com>
Closes: https://lore.kernel.org/linux-iommu/96efb6cf-a41c-420f-9673-2f0b682cac8c@oracle.com/
Fixes: a9af47e382 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add more tests for bitmaps smaller than or equal to an u8, though skip the
tests if the IOVA buffer size is smaller than the mock page size.
Link: https://lore.kernel.org/r/20240627110105.62325-4-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With 64k base pages, the first 128k iova length test requires less than a
byte for a bitmap, exposing a bug in the tests that assume that bitmaps are
at least a byte.
Rather than dealing with bytes, have _test_mock_dirty_bitmaps() pass the
number of bits. The caller functions are adjusted to also use bits as well,
and converting to bytes when clearing, allocating and freeing the bitmap.
Link: https://lore.kernel.org/r/20240627110105.62325-2-joao.m.martins@oracle.com
Reported-by: Matt Ochs <mochs@nvidia.com>
Fixes: a9af47e382 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Matt Ochs <mochs@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If userspace program exits while the queue its subscribed to has packets
those need to be discarded.
commit dc21c6cc3d ("netfilter: nfnetlink_queue: acquire rcu_read_lock()
in instance_destroy_rcu()") fixed a (harmless) rcu splat that could be
triggered in this case.
Add a test case to cover this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the PMU counters test does a single CLFLUSH{,OPT} on the loop's
code, but due to speculative execution this might not cause LLC misses
within the measured section.
Instead of doing a single flush before the loop, do a cache flush on each
iteration of the loop to confuse the prediction and ensure that at least
one cache miss occurs within the measured section.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: keep MFENCE, massage changelog]
Link: https://lore.kernel.org/r/20240628005558.3835480-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tweak the macros in the PMU counters test to prepare for moving the
CLFLUSH+MFENCE instructions into the loop body, to fix an issue where
a single CLFUSH doesn't guarantee an LLC miss.
Link: https://lore.kernel.org/r/20240628005558.3835480-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
We cannot use CLONE_VFORK because we also need to wait for the timeout
signal.
Restore tests timeout by using the original fork() call in __run_test()
but also in __TEST_F_IMPL(). Also fix a race condition when waiting for
the test child process.
Because test metadata are shared between test processes, only the
parent process must set the test PID (child). Otherwise, t->pid may be
set to zero, leading to inconsistent error cases:
# RUN layout1.rule_on_mountpoint ...
# rule_on_mountpoint: Test ended in some other way [127]
# OK layout1.rule_on_mountpoint
ok 20 layout1.rule_on_mountpoint
As safeguards, initialize the "status" variable with a valid exit code,
and handle unknown test exits as errors.
The use of fork() introduces a new race condition in landlock/fs_test.c
which seems to be specific to hostfs bind mounts, but I haven't found
the root cause and it's difficult to trigger. I'll try to fix it with
another patch.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/r/9341d4db-5e21-418c-bf9e-9ae2da7877e1@sirena.org.uk
Fixes: a86f18903d ("selftests/harness: Fix interleaved scheduling leading to race conditions")
Fixes: 24cf65a622 ("selftests/harness: Share _metadata between forked processes")
Link: https://lore.kernel.org/r/20240621180605.834676-1-mic@digikod.net
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This test is unusual in that overriding TESTS does not change the tests to
be run. Split the individual tests into several functions and invoke them
through tests_run() as appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing calls these.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These functions are not used anymore.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The selftest does not use functions from mirror_gre_lib, ditch the import.
It does not use arping either, so drop the require_command as well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, the function test_span_failable() is always
called with should_fail=1. Drop the argument and streamline the code.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirroring tests are currently run in a skip_hw and optionally a skip_sw
mode. The former tests the SW datapath, the latter the HW datapath, if
available. In order to be able to test SW datapath on HW loopbacks, traps
are installed on ingress to get traffic from the HW datapath to the SW one.
This adds an unnecessary complexity when it would be much simpler to just
use a veth-based topology to test the SW datapath. Thus drop all the code
that supports this dual testing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirroring selftests work by sending ICMP traffic between two hosts.
Along the way, this traffic is mirrored to a gretap netdevice, and counter
taps are then installed strategically along the path of the mirrored
traffic to verify the mirroring took place.
The problem with this is that besides mirroring the primary traffic, any
other service traffic is mirrored as well. At the same time, because the
tests need to work in HW-offloaded scenarios, the ability of the device to
do arbitrary packet inspection should not be taken for granted. Most tests
therefore simply use matchall, one uses flower to match on IP address.
As a result, the selftests are noisy, because besides the primary ICMP
traffic, any amount of other service traffic is mirrored as well.
mirror_test() accommodated this noisiness by giving the counters an
allowance of several packets. But in the previous patch, where possible,
counter taps were changed to match only on an exact ICMP message. At least
in those cases, we can demand an exact number of packets to match.
Where the tap is installed on a connective netdevice, the exact matching is
not practical (though with u32, anything is possible). In those places,
there should still be some leeway -- and probably bigger than before,
because experience shows that these tests are very noisy.
To that end, change mirror_test() so that it can be either called with an
exact number to expect, or with an expression. Where leeway is needed,
adjust callers to pass a ">= 10" instead of mere 10.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirroring selftests work by sending ICMP traffic between two hosts.
Along the way, this traffic is mirrored to a gretap netdevice, and counter
taps are then installed strategically along the path of the mirrored
traffic to verify the mirroring took place.
The problem with this is that besides mirroring the primary traffic, any
other service traffic is mirrored as well. At the same time, because the
tests need to work in HW-offloaded scenarios, the ability of the device to
do arbitrary packet inspection should not be taken for granted. Most tests
therefore simply use matchall, one uses flower to match on IP address.
As a result, the selftests are noisy, because besides the primary ICMP
traffic, any amount of other service traffic is mirrored as well.
However, often the counter tap is installed at the remote end of the gretap
tunnel. Since this is a SW-datapath scenario anyway, we can make the filter
arbitrarily accurate.
Thus in this patch, add parameters forward_type and backward_type to
several mirroring test helpers, as some other helpers already have. Then
change do_test_span_dir_ips() to instead of installing one generic tap and
using it for test in both directions, install the tap for each direction
separately, matching on the ICMP type given by these parameters.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test works by sending packets through a tunnel, whence they are
forwarded to a LAG. One of the LAG children is removed from the LAG prior
to the exercise, and the test then counts how many packets pass through the
other one. The issue with this is that it counts all packets, not just the
encapsulated ones.
So instead add a second gretap endpoint to receive the sent packets, and
check reception counters there.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The argument $dir has a fallback value of "ingress". Move the fallback from
the usage site to the argument definition block to make the fact clearer.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The argument is not used by these functions except to propagate it for
ultimately no purpose.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some functions, argument-forwarding through "$@" without listing the
individual arguments explicitly is fundamental to the operation of a
function. E.g. xfail_on_veth() should be able to run various tests in the
fail-to-xfail regime, and usage of "$@" is appropriate as an abstraction
mechanism. For functions such as simple_if_init(), $@ is a handy way to
pass an array.
In other functions, it's merely a mechanism to save some typing, which
however ends up obscuring the real arguments and makes life hard for those
that end up reading the code.
This patch adds some of the implicit function arguments and correspondingly
expands $@'s. In several cases this will come in handy as following patches
adjust the parameter lists.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pmtu testing will require that the OVS module is installed,
so do that.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-8-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current pmtu test infrastucture requires an installed copy of the
ovs-vswitchd userspace. This means that any automated or constrained
environments may not have the requisite tools to run the tests. However,
the pmtu tests don't require any special classifier processing. Indeed
they are only using the vswitchd in the most basic mode - as a NORMAL
switch.
However, the ovs-dpctl kernel utility can now program all the needed basic
flows to allow traffic to traverse the tunnels and provide support for at
least testing some basic pmtu scenarios. More complicated flow pipelines
can be added to the internal ovs test infrastructure, but that is work for
the future. For now, enable the most common cases - wide mega flows with
no other prerequisites.
Enhance the pmtu testing to try testing using the internal utility, first.
As a fallback, if the internal utility isn't running, then try with the
ovs-vswitchd userspace tools.
Additionally, make sure that when the pyroute2 package is not available
the ovs-dpctl utility will error out to properly signal an error has
occurred and skip using the internal utility.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-7-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current iteration of IPv6 support requires explicit fields to be set
in addition to not properly support the actual IPv6 addresses properly.
With this change, make it so that the ipv6() bare option is usable to
create wildcarded flows to match broad swaths of ipv6 traffic.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-6-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will be used when setting details about the tunnel to use as
transport. There is a difference between the ODP format between tunnel():
the 'key' flag is not actually a flag field, so we don't support it in the
same way that the vswitchd userspace supports displaying it.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240625172245.233874-5-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These will be used in upcoming commits to set specific attributes for
interacting with tunnels. Since set() will use the key parsing routine, we
also make sure to prepend it with an open paren, for the action parsing to
properly understand it.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-4-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Until recently, the ovs-dpctl utility was used with a limited actions set
and didn't need to have support for multiple similar actions. However,
when adding support for tunnels, it will be important to support multiple
set() actions in a single flow. When printing these actions, the existing
code will be unable to print all of the sets - it will only print the
first.
Refactor this code to be easier to read and support multiple actions of the
same type in an action list.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The OVS module can operate in conjunction with various types of
tunnel ports. These are created as either explicit tunnel vport
types, OR by creating a tunnel interface which acts as an anchor
for the lightweight tunnel support.
This patch adds the ability to add tunnel ports to an OVS
datapath for testing various scenarios with tunnel ports. With
this addition, the vswitch "plumbing" will at least be able to
push packets around using the tunnel vports. Future patches
will add support for setting required tunnel metadata for lwts
in the datapath. The end goal will be to push packets via these
tunnels, and will be used in an upcoming commit for testing the
path MTU.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240625172245.233874-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
- batman-adv: fix RCU race at module unload time
Current release - new code bugs:
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not confirmed
- eth: bonding: fix incorrect software timestamping report
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset.
- fix the corner case with may_goto and jump to the 1st insn.
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=BYgZ
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bpf and netfilter.
There are a bunch of regressions addressed here, but hopefully nothing
spectacular. We are still waiting the driver fix from Intel, mentioned
by Jakub in the previous networking pull.
Current release - regressions:
- core: add softirq safety to netdev_rename_lock
- tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed
TFO
- batman-adv: fix RCU race at module unload time
Previous releases - regressions:
- openvswitch: get related ct labels from its master if it is not
confirmed
- eth: bonding: fix incorrect software timestamping report
- eth: mlxsw: fix memory corruptions on spectrum-4 systems
- eth: ionic: use dev_consume_skb_any outside of napi
Previous releases - always broken:
- netfilter: fully validate NFT_DATA_VALUE on store to data registers
- unix: several fixes for OoB data
- tcp: fix race for duplicate reqsk on identical SYN
- bpf:
- fix may_goto with negative offset
- fix the corner case with may_goto and jump to the 1st insn
- fix overrunning reservations in ringbuf
- can:
- j1939: recover socket queue on CAN bus error during BAM
transmission
- mcp251xfd: fix infinite loop when xmit fails
- dsa: microchip: monitor potential faults in half-duplex mode
- eth: vxlan: pull inner IP header in vxlan_xmit_one()
- eth: ionic: fix kernel panic due to multi-buffer handling
Misc:
- selftest: unix tests refactor and a lot of new cases added"
* tag 'net-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: mana: Fix possible double free in error handling path
selftest: af_unix: Check SIOCATMARK after every send()/recv() in msg_oob.c.
af_unix: Fix wrong ioctl(SIOCATMARK) when consumed OOB skb is at the head.
selftest: af_unix: Check EPOLLPRI after every send()/recv() in msg_oob.c
selftest: af_unix: Check SIGURG after every send() in msg_oob.c
selftest: af_unix: Add SO_OOBINLINE test cases in msg_oob.c
af_unix: Don't stop recv() at consumed ex-OOB skb.
selftest: af_unix: Add non-TCP-compliant test cases in msg_oob.c.
af_unix: Don't stop recv(MSG_DONTWAIT) if consumed OOB skb is at the head.
af_unix: Stop recv(MSG_PEEK) at consumed OOB skb.
selftest: af_unix: Add msg_oob.c.
selftest: af_unix: Remove test_unix_oob.c.
tracing/net_sched: NULL pointer dereference in perf_trace_qdisc_reset()
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
net: usb: qmi_wwan: add Telit FN912 compositions
tcp: fix tcp_rcv_fastopen_synack() to enter TCP_CA_Loss for failed TFO
ionic: use dev_consume_skb_any outside of napi
net: dsa: microchip: fix wrong register write when masking interrupt
Fix race for duplicate reqsk on identical SYN
ibmvnic: Add tx check to prevent skb leak
...
Print the guest's random seed during VM creation if and only if the seed
has changed since the seed was last printed. The vast majority of tests,
if not all tests at this point, set the seed during test initialization
and never change the seed, i.e. printing it every time a VM is created is
useless noise.
Snapshot and print the seed during early selftest init to play nice with
tests that use the kselftests harness, at the cost of printing an unused
seed for tests that change the seed during test-specific initialization,
e.g. dirty_log_perf_test. The kselftests harness runs each testcase in a
separate process that is forked from the original process before creating
each testcase's VM, i.e. waiting until first VM creation will result in
the seed being printed by each testcase despite it never changing. And
long term, the hope/goal is that setting the seed will be handled by the
core framework, i.e. that the dirty_log_perf_test wart will naturally go
away.
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240627021756.144815-2-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.
Without fix:
# RUN msg_oob.no_peek.oob ...
# msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
# oob: Test terminated by assertion
# FAIL msg_oob.no_peek.oob
not ok 2 msg_oob.no_peek.oob
With fix:
# RUN msg_oob.no_peek.oob ...
# OK msg_oob.no_peek.oob
ok 2 msg_oob.no_peek.oob
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.
This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).
This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.
This patch adds some test cases for SO_OOBINLINE.
Note the new test cases found two bugs in TCP.
1) After reading OOB data with non-inline mode, we can re-read
the data by setting SO_OOBINLINE.
# RUN msg_oob.no_peek.inline_oob_ahead_break ...
# msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
# msg_oob.c:147:inline_oob_ahead_break:TCP :oworld
# OK msg_oob.no_peek.inline_oob_ahead_break
ok 14 msg_oob.no_peek.inline_oob_ahead_break
2) The head OOB data is dropped if SO_OOBINLINE is disabled
if a new OOB data is queued.
# RUN msg_oob.no_peek.inline_ex_oob_drop ...
# msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
# msg_oob.c:172:inline_ex_oob_drop:TCP :y
# msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:inline_ex_oob_drop:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.inline_ex_oob_drop
ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.
>>> from socket import *
>>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hellowor', MSG_OOB)
8
>>> c2.recv(1, MSG_OOB) # consume OOB data stays at middle of recvq.
b'r'
>>> c1.send(b'ld', MSG_OOB)
2
>>> c2.recv(10) # recv() stops at the old consumed OOB
b'hellowo' # should be 'hellowol'
manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.
Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.
Without fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
# msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
# msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
# ex_oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ahead_break
not ok 11 msg_oob.no_peek.ex_oob_ahead_break
With fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
# msg_oob.c:147:ex_oob_ahead_break:TCP :helloworl
# OK msg_oob.no_peek.ex_oob_ahead_break
ok 11 msg_oob.no_peek.ex_oob_ahead_break
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While testing, I found some weird behaviour on the TCP side as well.
For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.
# RUN msg_oob.no_peek.ex_oob_drop ...
# msg_oob.c:146:ex_oob_drop:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop:TCP :Resource temporarily unavailable
# msg_oob.c:146:ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:ex_oob_drop:TCP :Invalid argument
# OK msg_oob.no_peek.ex_oob_drop
ok 9 msg_oob.no_peek.ex_oob_drop
# RUN msg_oob.no_peek.ex_oob_drop_2 ...
# msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop_2:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.ex_oob_drop_2
ok 10 msg_oob.no_peek.ex_oob_drop_2
This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
and its peer recv()s "hell" and "o".
>>> c2.recv(10)
b'hell'
>>> c2.recv(1, MSG_OOB)
b'o'
Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.
Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.
>>> c2.setblocking(False) # This causes -EAGAIN even with available data
>>> c2.recv(5)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
However, next recv() will return the following available data, "world".
>>> c2.recv(5)
b'world'
When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.
Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().
This patch also adds a test case that covers the issue.
Without fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
# msg_oob.c:135:ex_oob_break:Expected:ld
# msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
# ex_oob_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_break
not ok 8 msg_oob.no_peek.ex_oob_break
With fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# OK msg_oob.no_peek.ex_oob_break
ok 8 msg_oob.no_peek.ex_oob_break
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.
Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
>>> c2.recv(1, MSG_OOB)
b'o'
>>> c2.recv(9, MSG_PEEK) # This should return b'hell'
b'hellworld' # even with enough buffer.
Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.
This patch also adds test cases that add recv(MSG_PEEK) before each recv().
Without fix:
# RUN msg_oob.peek.oob_ahead_break ...
# msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
# msg_oob.c:135:oob_ahead_break:Expected:hell
# msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
# oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.peek.oob_ahead_break
not ok 13 msg_oob.peek.oob_ahead_break
With fix:
# RUN msg_oob.peek.oob_ahead_break ...
# OK msg_oob.peek.oob_ahead_break
ok 13 msg_oob.peek.oob_ahead_break
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.
The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.
This patch adds only a few tests with basic send() and recv() that
do not fail.
The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.
Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.
Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to test_multiply_events_wq: we receive one event and inject a
new one. But given that this time we are already in the event hook, we
can use hid_bpf_try_input_report() directly as this function will not
sleep.
Note that the injected event gets processed before the original one this
way.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-12-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Now that bpf_wq is available, we can write a test with it. Having
hid_bpf_input_report() waiting for the device means that we can
directly call it, and we get that event when the device is ready.
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-10-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We add 3 new tests:
- first, we make sure we can prevent the output_report to happen
- second, we make sure that we can detect that a given hidraw client
was actually doing the request, and for that client only, call ourself
hid_bpf_hw_output_report(), returning a custom value
- last, we ensure that we can not loop between hooks for
hid_hw_output_report() and manual calls to hid_bpf_hw_output_report()
from that same hook
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-8-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We add 3 new tests:
- first, we make sure we can prevent the raw_request to happen
- second, we make sure that we can detect that a given hidraw client
was actually doing the request, and for that client only, call ourself
hid_bpf_hw_request(), returning a custom value
- last, we ensure that we can not loop between hooks for
hid_hw_raw_request() and manual calls to hid_bpf_hw_request() from that
hook
Link: https://patch.msgid.link/20240626-hid_hw_req_bpf-v2-6-cfd60fb6c79f@kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Inside of test_pcm_time() arguments are printed via printf
but '%d' is used to print @flags (of type unsigned int).
Use '%u' instead, just like we do everywhere else.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240626084859.4350-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Teach the load generator how to wait for at least given number
of packets to be received. This will be useful for filtering
where we'll want to send a non-trivial number of packets and
make sure they landed in right queues.
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devices DMA stats to the host periodically. Add a helper
which can wait for that to happen, based on frequency reported
by the driver in ethtool.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We use random ports for communication. As Willem predicted
this leads to occasional failures. Try to check if port is
already in use by opening a socket and binding to that port.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ARRAY_SIZE is used on multiple places, move its definition in
bpf_misc.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240626134719.3893748-1-jolsa@kernel.org
Add new negative selftests which are intended to cover the
out-of-bounds memory access that could be performed on a
CONST_PTR_TO_DYNPTR within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY as an argument, and acceptance of invalid register types
i.e. PTR_TO_BTF_ID within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY.
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240625062857.92760-2-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The non-contiguous CBM test fails on AMD with:
Starting L3_NONCONT_CAT test ...
Mounting resctrl to "/sys/fs/resctrl"
CPUID output doesn't match 'sparse_masks' file content!
not ok 5 L3_NONCONT_CAT: test
AMD always supports non-contiguous CBM but does not report it via CPUID.
Fix the non-contiguous CBM test to use CPUID to discover non-contiguous
CBM support only on Intel.
Fixes: ae638551ab ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.
In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.
Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.
Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.
Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
eIW means encoded Interleave Ways.
eIG means encoded Interleave Granularity.
in HPA:
if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
the interleave bits are none, the following check is ignored.
if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.
if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
start at bit position eIG + 8 and end at eIG + eIW - 1.
if the interleave mask is insufficient to cover the required interleave
bits, the target cannot be attached to the region.
Fixes: 384e624bb2 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
It seems that there is no definition for config IP_GRE, and it is not a
dependency of other configs, so remove it.
linux$ find -name Kconfig | xargs grep "IP_GRE"
<-- nothing
There is a IPV6_GRE config defined in net/ipv6/Kconfig. It only depends
on NET_IPGRE_DEMUX but not IP_GRE.
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240624055539.2092322-1-yujie.liu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Userspace builds of the radix-tree testing suite fails because of commit
test_maple_tree: add the missing MODULE_DESCRIPTION() macro. Add the
proper defines to tools/testing/radix-tree/maple.c and
tools/testing/radix-tree/xarray.c so MODULE_DESCRIPTION has a definition.
This allows the build to succeed.
Link: https://lkml.kernel.org/r/20240617195221.106565-1-sidhartha.kumar@oracle.com
Fixes: 9f8090e8c4d1 ("test_maple_tree: add the missing MODULE_DESCRIPTION() macro")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
/proc/${pid}/status got Kthread field recently.
Test that userspace program is not reported as kernel thread.
Test that kernel thread is reported as kernel thread.
Use kthreadd with pid 2 for this.
Link: https://lkml.kernel.org/r/818c4c41-8668-4566-97a9-7254abf819ee@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Chunguang Wu <fullspring2018@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add several new test cases which assert corner cases on the eventfd
mechanism, for example, the supplied buffer is less than 8 bytes,
attempting to write a value that is too large, etc.
./eventfd_test
# Starting 9 tests from 1 test cases.
# RUN global.eventfd_check_flag_rdwr ...
# OK global.eventfd_check_flag_rdwr
ok 1 global.eventfd_check_flag_rdwr
# RUN global.eventfd_check_flag_cloexec ...
# OK global.eventfd_check_flag_cloexec
ok 2 global.eventfd_check_flag_cloexec
# RUN global.eventfd_check_flag_nonblock ...
# OK global.eventfd_check_flag_nonblock
ok 3 global.eventfd_check_flag_nonblock
# RUN global.eventfd_chek_flag_cloexec_and_nonblock ...
# OK global.eventfd_chek_flag_cloexec_and_nonblock
ok 4 global.eventfd_chek_flag_cloexec_and_nonblock
# RUN global.eventfd_check_flag_semaphore ...
# OK global.eventfd_check_flag_semaphore
ok 5 global.eventfd_check_flag_semaphore
# RUN global.eventfd_check_write ...
# OK global.eventfd_check_write
ok 6 global.eventfd_check_write
# RUN global.eventfd_check_read ...
# OK global.eventfd_check_read
ok 7 global.eventfd_check_read
# RUN global.eventfd_check_read_with_nonsemaphore ...
# OK global.eventfd_check_read_with_nonsemaphore
ok 8 global.eventfd_check_read_with_nonsemaphore
# RUN global.eventfd_check_read_with_semaphore ...
# OK global.eventfd_check_read_with_semaphore
ok 9 global.eventfd_check_read_with_semaphore
# PASSED: 9 / 9 tests passed.
# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20240527000200.5615-1-wen.yang@linux.dev
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Tim Bird <tim.bird@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about several cases of using a signed integer for the
priority argument to mq_receive(3), which expects an unsigned int.
Fix this by declaring the type as unsigned int in all cases.
Link: https://lkml.kernel.org/r/20240527200835.143682-1-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Valentin Obst <kernel@valentinobst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After calling fork() in test_prctl_fork_exec(), the global variable
ksm_full_scans_fd is initialized to 0 in the child process upon entering
the main function of ./ksm_functional_tests.
In the function call chain test_child_ksm() -> __mmap_and_merge_range ->
ksm_merge-> ksm_get_full_scans, start_scans = ksm_get_full_scans() will
return an error. Therefore, the value of ksm_full_scans_fd needs to be
initialized before calling test_child_ksm in the child process.
Link: https://lkml.kernel.org/r/20240617052934.5834-1-shechenglong001@gmail.com
Signed-off-by: aigourensheng <shechenglong001@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a set of tests to validate that stack traces captured from or in the
presence of active uprobes and uretprobes are valid and complete.
For this we use BPF program that are installed either on entry or exit
of user function, plus deep-nested USDT. One of target funtions
(target_1) is recursive to generate two different entries in the stack
trace for the same uprobe/uretprobe, testing potential edge conditions.
If there is no fixes, we get something like this for one of the scenarios:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb3 (in target_4)
ENTRY #1: 0x758fd3 (in target_2)
ENTRY #2: 0x758ffd (in target_1)
ENTRY #3: 0x7fffffffe000
ENTRY #4: 0x7fffffffe000
ENTRY #5: 0x6f8f39
ENTRY #6: 0x6fa6f0
ENTRY #7: 0x7f403f229590
Entry #3 and #4 (0x7fffffffe000) are uretprobe trampoline addresses
which obscure actual target_1 and another target_1 invocations. Also
note that between entry #0 and entry #1 we are missing an entry for
target_3.
With fixes, we get desired full stack traces:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb7 (in target_4)
ENTRY #1: 0x758fc8 (in target_3)
ENTRY #2: 0x758fd3 (in target_2)
ENTRY #3: 0x758ffd (in target_1)
ENTRY #4: 0x758ff3 (in target_1)
ENTRY #5: 0x75922c (in caller)
ENTRY #6: 0x6f8f39
ENTRY #7: 0x6fa6f0
ENTRY #8: 0x7f986adc4cd0
Now there is a logical and complete sequence of function calls.
Link: https://lore.kernel.org/all/20240522013845.1631305-5-andrii@kernel.org/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZnlmXgAKCRDbK58LschI
g2ovAP9iynwwFEjMSxHjQVXSq1J1PMqF4966vmy30RCKJMMN/QD/SRsRRKcfsPis
BzKOdsOVbWlDl2CUqvBrPZGT6laKoQc=
=6/0V
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-24
We've added 12 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 412 insertions(+), 16 deletions(-).
The main changes are:
1) Fix a BPF verifier issue validating may_goto with a negative offset,
from Alexei Starovoitov.
2) Fix a BPF verifier validation bug with may_goto combined with jump to
the first instruction, also from Alexei Starovoitov.
3) Fix a bug with overrunning reservations in BPF ring buffer,
from Daniel Borkmann.
4) Fix a bug in BPF verifier due to missing proper var_off setting related
to movsx instruction, from Yonghong Song.
5) Silence unnecessary syzkaller-triggered warning in __xdp_reg_mem_model(),
from Daniil Dulov.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: Remove WARN() from __xdp_reg_mem_model()
selftests/bpf: Add tests for may_goto with negative offset.
bpf: Fix may_goto with negative offset.
selftests/bpf: Add more ring buffer test coverage
bpf: Fix overrunning reservations in ringbuf
selftests/bpf: Tests with may_goto and jumps to the 1st insn
bpf: Fix the corner case with may_goto and jump to the 1st insn.
bpf: Update BPF LSM maintainer list
bpf: Fix remap of arena.
selftests/bpf: Add a few tests to cover
bpf: Add missed var_off setting in coerce_subreg_to_size_sx()
bpf: Add missed var_off setting in set_sext32_default_val()
====================
Link: https://patch.msgid.link/20240624124330.8401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 606af8293c ("KVM: selftests: arm64: Test vCPU-scoped feature ID
registers") intended to test that MPIDR_EL1 is unchanged across vCPU
reset but failed at actually doing so.
Add the missing assertion.
Link: https://lore.kernel.org/r/20240621225045.2472090-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
* Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
* Allow getting/setting MSRs for SEV-ES guests, if they're using the pre-6.9
KVM_SEV_ES_INIT API.
* Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old routing
table requested that.
Generic:
* Avoid __fls(0)
* Fix reference leak on hwpoisoned page
* Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
* Fix bug in __kvm_handle_hva_range() where KVM calls a function pointer
that was intended to be a marker only (nothing bad happens but kind of
a mine and also technically undefined behavior)
* Do not bother accounting allocations that are small and freed before
getting back to userspace.
Selftests:
* Fix compilation for RISC-V.
* Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
* Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZ1sNwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO8Rwf/ZH+zVOkKdrA0XT71nToc9AkqObPO
mBpV5p+E4boVHSWNQgY7R0yu1ViLc+HotTYf7MoQGeobm60YtDkWHlxcKrQD672C
cLRdl02iRRDGMTRAhpr9jvT/yMHB5kYDxEYmO44nPJKwodcb4/4RJQpt8wyslT2G
uUDpnYMFmSZ8/Zt7IznSEcSx1D+4WFqLT2AZPsJ55w45BFiI+5uRQ/kRaM9iM0+r
yuOQCCK3+pV4CqA+ckbZ6j6+RufcovjEdYCoxLQDOdK6tQTD9aqwJFQ/o2tc+fJT
Hj1MRRsqmdOePdjguBMsfDrEnjXoBveAt96BVheavbpC1UaWp5n0r8p2sA==
=Egkk
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
add simple kfuncs to create/destroy a context type to bpf_testmod,
register them and add a kfunc_call test to use them. This provides
test coverage for registration of dtor kfuncs from modules.
By transferring the context pointer to a map value as a __kptr
we also trigger the map-based dtor cleanup logic, improving test
coverage.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-7-alan.maguire@oracle.com
Adding selftest to verify that struct_ops maps are auto attached by
bpf skeleton's `*__attach` function.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240621180324.238379-1-yatsenko@meta.com
This patch changes a few tests to make use of regular expressions.
Fixed tests otherwise fail when compiled with GCC.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240617141458.471620-3-cupertino.miranda@oracle.com
Add support for __regex and __regex_unpriv macros to check the test
execution output against a regular expression. This is similar to __msg
and __msg_unpriv, however those expect do substring matching.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240617141458.471620-2-cupertino.miranda@oracle.com
This reverts [1] and changes return value for bpf_session_cookie
in bpf selftests. Having long * might lead to problems on 32-bit
architectures.
Fixes: 2b8dd87332 ("bpf: Make bpf_session_cookie() kfunc return long *")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240619081624.1620152-1-jolsa@kernel.org
amt.sh is written in bash, not sh.
So, shebang should be bash.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diag_uid selftest failed on NIPA where the received nlmsg_type is
NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default
and sock_diag_lock_handler() failed to load the module.
# # Starting 2 tests from 2 test cases.
# # RUN diag_uid.uid.1 ...
# # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20)
# # 1: Test terminated by assertion
# # FAIL diag_uid.uid.1
# not ok 1 diag_uid.uid.1
Let's add all AF_UNIX Kconfig to the config file under af_unix dir
so that NIPA consumes it.
Fixes: ac011361bd ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/104-diag-uid/stdout [0]
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/config [1]
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617073033.0cbb829d@kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since start_server_str() is added now, it can be used in mptcp.c in
start_mptcp_server() instead of using helpers make_sockaddr() and
start_server_addr() to simplify the code.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/16fb3e2cd60b64b5470b0e69f1aa233feaf2717c.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In test_bpf_ip_check_defrag_ok(), the new helper client_socket() can be
used to replace connect_to_fd_opts() with "noconnect" opts, and the strcut
member "noconnect" of network_helper_opts can be dropped now, always
connect to server in connect_to_fd_opts().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f45760becce51986e4e08283c7df0f933eb0da14.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch extracts a new helper client_socket() from connect_to_fd_opts()
to create the client socket, but don't connect to the server. Then
connect_to_fd_opts() can be implemented using client_socket() and
connect_fd_to_addr(). This helper can be used in connect_to_addr() too,
and make "noconnect" opts useless.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/4169c554e1cee79223feea49a1adc459d55e1ffe.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch moves "post_socket_cb" and "noconnect" into connect_to_addr(),
then connect_to_fd_opts() can be implemented by getsockname() and
connect_to_addr(). This change makes connect_to_* interfaces more unified.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/4569c30533e14c22fae6c05070aad809720551c1.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The opts.{type, noconnect} is at least a bit non intuitive or unnecessary.
The only use case now is in test_bpf_ip_check_defrag_ok which ends up
bypassing most (or at least some) of the connect_to_fd_opts() logic. It's
much better that test should have its own connect_to_fd_opts() instead.
This patch adds a new "type" parameter for connect_to_fd_opts(), then
opts->type and getsockopt(SO_TYPE) can be replaced by "type" parameter in
it.
In connect_to_fd(), use getsockopt(SO_TYPE) to get "type" value and pass
it to connect_to_fd_opts().
In bpf_tcp_ca.c and cgroup_v1v2.c, "SOCK_STREAM" types are passed to
connect_to_fd_opts(), and in ip_check_defrag.c, different types "SOCK_RAW"
and "SOCK_DGRAM" are passed to it.
With these changes, the strcut member "type" of network_helper_opts can be
dropped now.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/cfd20b5ad4085c1d1af5e79df3b09013a407199f.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZ0VAAACgkQMUZtbf5S
IrtMnQ//b0YNnC2PduSn6fDnDamyZW3vjqwXQ6K0DsgSzEIiAtEd6LbkPN4vAcpp
k634dHseQjTuAcsTZxisIs32nC2up9q/t/+6XD8VSaQbSzKhB+rFDviUxfGJWjt4
MZRK0mDcmib2tXAEfYnMi+QjvC5S+ZSHLpemDdzTI3AyKcPynqLcM1PcC0CGS5GS
6MpvRAtEgTAkXd2rc4WAbOcmd8NLJN80f/srRDXFVqrXy8f6adaULvCvzSXSiQy8
peUaPhI6BYNBL2Tzjp3D+Nh54ks3Ol8MeqaGYsuJHtgd+/I+/YWzYc74an8BuEwR
C6fszbH7i64WaQUI5ZhX/1Da0CTesNxzsPgeAFP3qEe20r53vN0NiFjRrHpO02El
lew9Hrx27Zzt9k3eSdtC3GGj/S93PYjE5RRuSClQrW8fUqETZ8dFocbrNAraHGMv
rDOqIT3XMg/BIBw9ADxizAgsrFC0QbBShQPs2iMuuVwmrWj9DEC0GKlt3KxyPT36
fl4w3gGRdIDz/ZTXKQZtta3Z4ckaKiTw8jbNXxteBDEHErFYYND+4XDzK/uIqHCe
0IoVWVUnhVfKOuGBIDGIFDsAvbgqTcVd+wZTB4SxZsbXISzpfYLcrM4qXf4YQNNb
MeIQg0Zwjm+xdLGXVCt8wBBGmj4EK9uMa3wjYu3lGREgxyH42eI=
=Lb9b
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bpf and netfilter.
Happy summer solstice! The line count is a bit inflated by a selftest
and update to a driver's FW interface header, in reality this is
slightly below average for us. We are expecting one driver fix from
Intel, but there are no big known issues.
Current release - regressions:
- ipv6: bring NLM_DONE out to a separate recv() again
Current release - new code bugs:
- wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API
Previous releases - regressions:
- wifi: mac80211: fix monitor channel setting with chanctx emulation
(probably most awaited of the fixes in this PR, tracked by Thorsten)
- usb: ax88179_178a: bring back reset on init, if PHY is disconnected
- bpf: fix UML x86_64 compile failure with BPF
- bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
with malicious BPF
- eth: mvpp2: use slab_build_skb() for packets in slab, driver was
missed during API refactoring
- wifi: iwlwifi: add missing unlock of mvm mutex
Previous releases - always broken:
- ipv6: add a number of missing null-checks for in6_dev_get(), in case
IPv6 disabling races with the datapath
- bpf: fix reg_set_min_max corruption of fake_reg
- sched: act_ct: add netns as part of the key of tcf_ct_flow_table"
* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
selftests: virtio_net: add forgotten config options
bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
bnxt_en: Set TSO max segs on devices with limits
bnxt_en: Update firmware interface to 1.10.3.44
net: stmmac: Assign configured channel value to EXTTS event
net: do not leave a dangling sk pointer, when socket creation fails
net/tcp_ao: Don't leak ao_info on error-path
ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
ipv6: bring NLM_DONE out to a separate recv() again
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
selftests: openvswitch: Set value to nla flags.
octeontx2-pf: Fix linking objects into multiple modules
octeontx2-pf: Add error handling to VLAN unoffload handling
virtio_net: fixing XDP for fully checksummed packets handling
virtio_net: checksum offloading handling fix
...
Introduce a new 'of-fullname-regex' property that takes a regular
expression and matches against the OF_FULLNAME property. It allows
matching controllers that don't have a unique DT address across sibling
controllers, and thus dt-mmio can't be used.
One particular example of where this is needed is on MT8195 which has
multiple USB controllers described by two level deep nodes and using the
ranges property:
ssusb2: usb@112a1000 {
reg = <0 0x112a1000 0 0x2dff>, <0 0x112a3e00 0 0x0100>;
ranges = <0 0 0 0x112a0000 0 0x3f00>;
xhci2: usb@0 {
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240613-kselftest-discoverable-probe-mt8195-kci-v1-2-7b396a9b032d@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Test that CTR_EL0 is modifiable from userspace, that changes are
visible to guests, and that they are preserved across a vCPU reset.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The p_align values in PT_LOAD were ignored for static PIE executables
(i.e. ET_DYN without PT_INTERP). This is because there is no way to
request a non-fixed mmap region with a specific alignment. ET_DYN with
PT_INTERP uses a separate base address (ELF_ET_DYN_BASE) and binfmt_elf
performs the ASLR itself, which means it can also apply alignment. For
the mmap region, the address selection happens deep within the vm_mmap()
implementation (when the requested address is 0).
The earlier attempt to implement this:
commit 9630f0d60f ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
commit 925346c129 ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders")
did not take into account the different base address origins, and were
eventually reverted:
aeb7923733 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"")
In order to get the correct alignment from an mmap base, binfmt_elf must
perform a 0-address load first, then tear down the mapping and perform
alignment on the resulting address. Since this is slightly more overhead,
only do this when it is needed (i.e. the alignment is not the default
ELF alignment). This does, however, have the benefit of being able to
use MAP_FIXED_NOREPLACE, to avoid potential collisions.
With this fixed, enable the static PIE self tests again.
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215275
Link: https://lore.kernel.org/r/20240508173149.677910-3-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
After commit 4d1cd3b2c5 ("tools/testing/selftests/exec: fix link
error"), the load address alignment tests tried to build statically.
This was silently ignored in some cases. However, after attempting to
further fix the build by switching to "-static-pie", the test started
failing. This appears to be due to non-PT_INTERP ET_DYN execs ("static
PIE") not doing alignment correctly, which remains unfixed[1]. See commit
aeb7923733 ("revert "fs/binfmt_elf: use PT_LOAD p_align values for
static PIE"") for more details.
Provide rules to build both static and non-static PIE binaries, improve
debug reporting, and perform several test steps instead of a single
all-or-nothing test. However, do not actually enable static-pie tests;
alignment specification is only supported for ET_DYN with PT_INTERP
("regular PIE").
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215275 [1]
Link: https://lore.kernel.org/r/20240508173149.677910-1-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
Unlike the list of isolated CPUs, it is not easy to programamatically
determine what sched domains are being created by the scheduler just
by examinng the data in various kernfs filesystems. The easiest way
to get this information is by enabling /sys/kernel/debug/sched/verbose
file to make those information displayed in the console. This is also
what the test_cpuset_prs.sh script is doing when the -v flag is given.
It is rather hard to fetch the data from the console and compare it to
the expected result. An easier way is to dump the expected sched-domain
information out to the console so that they can be visually compared
with the actual sched domain data. However, this have to be done manually
by visual inspection and so will only be done once in a while.
Moreover the preceding cpuset commits also change the cpuset behavior
requiring corresponding chanages in some test cases as well as new test
cases to test the newly added functionality.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The test robot reported two different problems when running the
test_cpuset_prs.sh test.
# ./test_cpuset_prs.sh: line 106: echo: write error: Input/output error
# :
# Effective cpus changed to 0-1,4-7 after test 4!
The write error is caused by writing to /dev/console. It looks like
some systems may not have /dev/console configured or in a writeable
state. Fix this by checking the existence of /dev/console before
attempting to write it.
After the completion of each test run, the script will check if the
cpuset state is reset back to the original state. That usually takes a
while to happen. The test script inserts some artificial delay to make
sure that the reset has completed. The current setting is about 80ms.
That may not be enough in some cases especially if the test system is
slow. Double it to 160ms to minimize the chance of this type of failure.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406141712.dbbaa8fd-oliver.sang@intel.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
this selftest is designed for evaluating the SRv6 End.DX6 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv6 L3 VPN use cases.
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
this selftest is designed for evaluating the SRv6 End.DX4 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv4 L3 VPN use cases.
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Netlink flags, although they don't have payload at the netlink level,
are represented as having "True" as value in pyroute2.
Without it, trying to add a flow with a flag-type action (e.g: pop_vlan)
fails with the following traceback:
Traceback (most recent call last):
File "[...]/ovs-dpctl.py", line 2498, in <module>
sys.exit(main(sys.argv))
^^^^^^^^^^^^^^
File "[...]/ovs-dpctl.py", line 2487, in main
ovsflow.add_flow(rep["dpifindex"], flow)
File "[...]/ovs-dpctl.py", line 2136, in add_flow
reply = self.nlm_request(
^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 822, in nlm_request
return tuple(self._genlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/generic/__init__.py", line 126, in
nlm_request
return tuple(super().nlm_request(*argv, **kwarg))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/nlsocket.py", line 1124, in nlm_request
self.put(msg, msg_type, msg_flags, msg_seq=msg_seq)
File "[...]/pyroute2/netlink/nlsocket.py", line 389, in put
self.sendto_gate(msg, addr)
File "[...]/pyroute2/netlink/nlsocket.py", line 1056, in sendto_gate
msg.encode()
File "[...]/pyroute2/netlink/__init__.py", line 1245, in encode
offset = self.encode_nlas(offset)
^^^^^^^^^^^^^^^^^^^^^^^^
File "[...]/pyroute2/netlink/__init__.py", line 1560, in encode_nlas
nla_instance.setvalue(cell[1])
File "[...]/pyroute2/netlink/__init__.py", line 1265, in setvalue
nlv.setvalue(nla_tuple[1])
~~~~~~~~~^^^
IndexError: list index out of range
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.
# dash -c 'ns=client; echo "${ns:0:1}"' 2>error
# cat error
dash: 1: Bad substitution
# bash -c 'ns=client; echo "${ns:0:1}"' 2>error
c
# cat error
This leads to tests that neither pass nor fail.
F.e.
TEST: arp_ping [START]
adding sandbox 'test_arp_ping'
Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
create namespaces
./openvswitch.sh: 282: eval: Bad substitution
TEST: ct_connect_v4 [START]
adding sandbox 'test_ct_connect_v4'
Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
./openvswitch.sh: 322: eval: Bad substitution
create namespaces
Resolve this by making openvswitch.sh a bash script.
Fixes: 918423fda9 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KVM_SET_BOOT_CPU_ID ioctl missed to reject invalid vCPU IDs. Verify
this no longer works and gets rejected with an appropriate error code.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-6-minipli@grsecurity.net
[sean: add test for MAX_VCPU_ID+1, always do negative test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The KVM_CREATE_VCPU ioctl ABI had an implicit integer truncation bug,
allowing 2^32 aliases for a vCPU ID by setting the upper 32 bits of a 64
bit ioctl() argument.
It also allowed excluding a once set boot CPU ID.
Verify this no longer works and gets rejected with an error.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240614202859.3597745-5-minipli@grsecurity.net
[sean: tweak assert message+comment for 63:32!=0 testcase]
Signed-off-by: Sean Christopherson <seanjc@google.com>
When validating writes to controls we check that whatever value we wrote
actually appears in the control. For volatile controls we cannot assume
that this will be the case, the value may be changed at any time
including between our write and read. Handle this by moving the check
for volatile controls that we currently do for events to a separate
block and just verifying that whatever value we read is valid for the
control.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240614-alsa-selftest-volatile-v1-1-3874f02964b1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-5-tiwai@suse.de
Adapt the current test-livepatch.sh script to account the number of
applied livepatches and ensure that an atomic replace livepatch disables
all previously applied livepatches.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20240603-lp-atomic-replace-v3-1-9f3b8ace5c9f@suse.com
[mbenes@suse.cz: Fixed typo in a comment.]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.
Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.
Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.
Fixes: f589234e1a ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with W=1 the following errors are seen:
WARNING: modpost: missing MODULE_DESCRIPTION() in tools/testing/nvdimm/test/nfit_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in tools/testing/nvdimm/test/ndtest.o
Add the required MODULE_DESCRIPTION() to the test platform device
drivers.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/r/20240611-nvdimm-test-mod-warn-v1-1-4a583be68c17@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Ensure relocated BTF looks as expected; in this case identical to
original split BTF, with a few duplicate anonymous types added to
split BTF by the relocation process. Also add relocation tests
for edge cases like missing type in base BTF and multiple types
of the same name.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-5-alan.maguire@oracle.com
Test generation of split+distilled base BTF, ensuring that
- named base BTF STRUCTs and UNIONs are represented as 0-vlen sized
STRUCT/UNIONs
- named ENUM[64]s are represented as 0-vlen named ENUM[64]s
- anonymous struct/unions are represented in full in split BTF
- anonymous enums are represented in full in split BTF
- types unreferenced from split BTF are not present in distilled
base BTF
Also test that with vmlinux BTF and split BTF based upon it,
we only represent needed base types referenced from split BTF
in distilled base.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-3-alan.maguire@oracle.com
Mainly MM singleton fixes. And a couple of ocfs2 regression fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZnCEQAAKCRDdBJ7gKXxA
jmgSAQDk3BYs1n67cnwx/Zi04yMYDyfYTCYg2udPfT2a+GpmbwD+N5dJd/vCztXH
5eLpP11xd/yr2+I9FefyZeUuA80KtgQ=
=2agY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Mainly MM singleton fixes. And a couple of ocfs2 regression fixes"
* tag 'mm-hotfixes-stable-2024-06-17-11-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kcov: don't lose track of remote references during softirqs
mm: shmem: fix getting incorrect lruvec when replacing a shmem folio
mm/debug_vm_pgtable: drop RANDOM_ORVALUE trick
mm: fix possible OOB in numa_rebuild_large_mapping()
mm/migrate: fix kernel BUG at mm/compaction.c:2761!
selftests: mm: make map_fixed_noreplace test names stable
mm/memfd: add documentation for MFD_NOEXEC_SEAL MFD_EXEC
mm: mmap: allow for the maximum number of bits for randomizing mmap_base by default
gcov: add support for GCC 14
zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING
mm: huge_memory: fix misused mapping_large_folio_support() for anon folios
lib/alloc_tag: fix RCU imbalance in pgalloc_tag_get()
lib/alloc_tag: do not register sysctl interface when CONFIG_SYSCTL=n
MAINTAINERS: remove Lorenzo as vmalloc reviewer
Revert "mm: init_mlocked_on_free_v3"
mm/page_table_check: fix crash on ZONE_DEVICE
gcc: disable '-Warray-bounds' for gcc-9
ocfs2: fix NULL pointer dereference in ocfs2_abort_trigger()
ocfs2: fix NULL pointer dereference in ocfs2_journal_dirty()
Add three unit tests in verifier_movsx.c to cover
cases where missed var_off setting can cause
unexpected verification success or failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240615174637.3995589-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KTAP parsers interpret the output of ksft_test_result_*() as being the
name of the test. The map_fixed_noreplace test uses a dynamically
allocated base address for the mmap()s that it tests and currently
includes this in the test names that it logs so the test names that are
logged are not stable between runs. It also uses multiples of PAGE_SIZE
which mean that runs for kernels with different PAGE_SIZE configurations
can't be directly compared. Both these factors cause issues for CI
systems when interpreting and displaying results.
Fix this by replacing the current test names with fixed strings describing
the intent of the mappings that are logged, the existing messages with the
actual addresses and sizes are retained as diagnostic prints to aid in
debugging.
Link: https://lkml.kernel.org/r/20240605-kselftest-mm-fixed-noreplace-v1-1-a235db8b9be9@kernel.org
Fixes: 4838cf70e5 ("selftests/mm: map_fixed_noreplace: conform test to TAP format output")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add cases to check minimum and maximum MTU which are exposed via
"ip -d link show". Test configuration and traffic. Use VLAN devices as
usually VLAN header (4 bytes) is not included in the MTU, and drivers
should configure hardware correctly to send maximum MTU payload size
in VLAN tagged packets.
$ ./min_max_mtu.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: Test maximum MTU configuration [ OK ]
TEST: Test traffic, packet size is maximum MTU [ OK ]
TEST: Test minimum MTU configuration [ OK ]
TEST: Test traffic, packet size is minimum MTU [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/89de8be8989db7a97f3b39e3c9da695673e78d2e.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmykPwAKCRDbK58LschI
g7LOAQDVPkJ9k50/xrWIBtgvkGq1jCrMlpwEh49QYO0xoqh1IgEA+6Xje9jCIsdp
AHz9WmZ6G0EpTuDgFq50K1NVZ7MgSQE=
=zKfv
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-14
We've added 8 non-merge commits during the last 2 day(s) which contain
a total of 9 files changed, 92 insertions(+), 11 deletions(-).
The main changes are:
1) Silence a syzkaller splat under CONFIG_DEBUG_NET=y in pskb_pull_reason()
triggered via __bpf_try_make_writable(), from Florian Westphal.
2) Fix removal of kfuncs during linking phase which then throws a kernel
build warning via resolve_btfids about unresolved symbols,
from Tony Ambardar.
3) Fix a UML x86_64 compilation failure from BPF as pcpu_hot symbol
is not available on User Mode Linux, from Maciej Żenczykowski.
4) Fix a register corruption in reg_set_min_max triggering an invariant
violation in BPF verifier, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Harden __bpf_kfunc tag against linker kfunc removal
compiler_types.h: Define __retain for __attribute__((__retain__))
bpf: Avoid splat in pskb_pull_reason
bpf: fix UML x86_64 compile failure
selftests/bpf: Add test coverage for reg_set_min_max handling
bpf: Reduce stack consumption in check_stack_write_fixed_off
bpf: Fix reg_set_min_max corruption of fake_reg
MAINTAINERS: mailmap: Update Stanislav's email address
====================
Link: https://lore.kernel.org/r/20240614203223.26500-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve arena based tests and add several C and asm tests
with specific pattern.
These tests would have failed without add_const verifier support.
Also add several loop_inside_iter*() tests that are not related to add_const,
but nice to have.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240613013815.953-5-alexei.starovoitov@gmail.com
Compilers can generate the code
r1 = r2
r1 += 0x1
if r2 < 1000 goto ...
use knowledge of r2 range in subsequent r1 operations
So remember constant delta between r2 and r1 and update r1 after 'if' condition.
Unfortunately LLVM still uses this pattern for loops with 'can_loop' construct:
for (i = 0; i < 1000 && can_loop; i++)
The "undo" pass was introduced in LLVM
https://reviews.llvm.org/D121937
to prevent this optimization, but it cannot cover all cases.
Instead of fighting middle end optimizer in BPF backend teach the verifier
about this pattern.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613013815.953-3-alexei.starovoitov@gmail.com
We drop the need for the attach() bpf syscall, but we need to set up
the hid_id field before calling __load().
The .bpf.c part is mechanical: we create one struct_ops per HID-BPF
program, as all the tests are for one program at a time.
Link: https://lore.kernel.org/r/20240608-hid_bpf_struct_ops-v3-4-6ac6ade58329@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Add special test to be sure that only __nullable BTF params can be
replaced by NULL. This patch adds fake kfuncs in bpf_testmod to
properly test different params.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-6-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust selftests to use nullable option for state and IV arg.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240613211817.1551967-4-vadfed@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When selftests are built with a new enough clang, the arena selftests
opt-in to use LLVM address_space attribute annotations for arena
pointers.
These annotations are not emitted by kfunc prototype generation. This
causes compilation errors when clang sees conflicting prototypes.
Fix by opting arena selftests out of using generated kfunc prototypes.
Fixes: 770abbb5a2 ("bpftool: Support dumping kfunc prototypes from BTF")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202406131810.c1B8hTm8-lkp@intel.com/
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/fc59a617439ceea9ad8dfbb4786843c2169496ae.1718295425.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- Revert "igc: fix a log entry using uninitialized netdev",
it traded lack of netdev name in a printk() for a crash
Previous releases - regressions:
- Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- geneve: fix incorrectly setting lengths of inner headers in the skb,
confusing the drivers and causing mangled packets
- sched: initialize noop_qdisc owner to avoid false-positive recursion
detection (recursing on CPU 0), which bubbles up to user space as
a sendmsg() error, while noop_qdisc should silently drop
- netdevsim: fix backwards compatibility in nsim_get_iflink()
Previous releases - always broken:
- netfilter: ipset: fix race between namespace cleanup and gc
in the list:set type
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cyRR
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Slim pickings this time, probably a combination of summer, DevConf.cz,
and the end of first half of the year at corporations.
Current release - regressions:
- Revert "igc: fix a log entry using uninitialized netdev", it traded
lack of netdev name in a printk() for a crash
Previous releases - regressions:
- Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- geneve: fix incorrectly setting lengths of inner headers in the
skb, confusing the drivers and causing mangled packets
- sched: initialize noop_qdisc owner to avoid false-positive
recursion detection (recursing on CPU 0), which bubbles up to user
space as a sendmsg() error, while noop_qdisc should silently drop
- netdevsim: fix backwards compatibility in nsim_get_iflink()
Previous releases - always broken:
- netfilter: ipset: fix race between namespace cleanup and gc in the
list:set type"
* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
gve: Clear napi->skb before dev_kfree_skb_any()
ionic: fix use after netif_napi_del()
Revert "igc: fix a log entry using uninitialized netdev"
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
net/ipv6: Fix the RT cache flush via sysctl using a previous delay
net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
gve: ignore nonrelevant GSO type bits when processing TSO headers
net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
mailmap: map Geliang's new email address
mptcp: pm: update add_addr counters after connect
mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
mptcp: ensure snd_una is properly initialized on connect
...
There are two spelling mistakes in some error messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240613073429.1797451-1-colin.i.king@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a selftest that exercises the sysctl added in the previous patches.
Test that set/get works as expected; that across seeds we eventually hit
all NHs (test_mpath_seed_*); and that a given seed keeps hitting the same
NHs even across seed changes (test_mpath_seed_stability_*).
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-6-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to be able to save the current value of a sysctl without changing
it, split the relevant bit out of sysctl_set() into a new helper.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-5-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xfrm_info selftest locally defines an aliased type such that folks
with CONFIG_XFRM_INTERFACE=m/n configs can still build the selftests.
See commit aa67961f32 ("selftests/bpf: Allow building bpf tests with CONFIG_XFRM_INTERFACE=[m|n]").
Thus, it is simpler if this selftest opts out of using enerated kfunc
prototypes. The preprocessor macro this commit uses will be introduced
in the final commit.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/afe0bb1c50487f52542cdd5230c4aef9e36ce250.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf-nf selftests play various games with aliased types such that
folks with CONFIG_NF_CONNTRACK=m/n configs can still build the
selftests. See commits:
1058b6a78d ("selftests/bpf: Do not fail build if CONFIG_NF_CONNTRACK=m/n")
92afc5329a ("selftests/bpf: Fix build errors if CONFIG_NF_CONNTRACK=m")
Thus, it is simpler if these selftests opt out of using generated kfunc
prototypes. The preprocessor macro this commit uses will be introduced
in the final commit.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/044a5b10cb3abd0d71cb1c818ee0bfc4a2239332.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, kfunc declarations in bpf_kfuncs.h (and others) used "user
facing" types for kfuncs prototypes while the actual kfunc definitions
used "kernel facing" types. More specifically: bpf_dynptr vs
bpf_dynptr_kern, __sk_buff vs sk_buff, and xdp_md vs xdp_buff.
It wasn't an issue before, as the verifier allows aliased types.
However, since we are now generating kfunc prototypes in vmlinux.h (in
addition to keeping bpf_kfuncs.h around), this conflict creates
compilation errors.
Fix this conflict by using "user facing" types in kfunc definitions.
This results in more casts, but otherwise has no additional runtime
cost.
Note, similar to 5b268d1ebc ("bpf: Have bpf_rdonly_cast() take a const
pointer"), we also make kfuncs take const arguments where appropriate in
order to make the kfunc more permissive.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/b58346a63a0e66bc9b7504da751b526b0b189a67.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The prototype in progs/map_percpu_stats.c is not in line with how the
actual kfuncs are defined in kernel/bpf/map_iter.c. This causes
compilation errors when kfunc prototypes are generated from BTF.
Fix by aligning with actual kfunc definitions.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/0497e11a71472dcb71ada7c90ad691523ae87c3b.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The prototype in progs/nested_trust_common.h is not in line with how the
actual kfuncs are defined in kernel/bpf/cpumask.c. This causes compilation
errors when kfunc prototypes are generated from BTF.
Fix by aligning with actual kfunc definitions.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/437936a4e554b02e04566dd6e3f0a5d08370cc8c.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some prototypes in progs/get_func_ip_test.c were not in line with how the
actual kfuncs are defined in net/bpf/test_run.c. This causes compilation
errors when kfunc prototypes are generated from BTF.
Fix by aligning with actual kfunc definitions.
Also remove two unused prototypes.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/1e68870e7626b7b9c6420e65076b307fc404a2f0.1718207789.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, we are writing the same value as we read into the TLS
register, hence we cannot confirm update of the register, making the
testcase "verify_tpidr_one" redundant. Fix this.
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240605115448.640717-1-dev.jain@arm.com
[catalin.marinas@arm.com: remove the increment style change]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Define a maximum allowable number of pids that can be livepatched in
test-syscall.sh as with extremely large machines the output from a
large number of processes overflows the dev/kmsg "expect" buffer in
the "check_result" function and causes a false error.
Reported-by: CKI Project <cki-project@redhat.com>
Signed-off-by: Ryan Sullivan <rysulliv@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Link: https://lore.kernel.org/r/20240606135348.4708-1-rysulliv@redhat.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Currently fp-stress only covers userspace use of floating point, it does
not cover any kernel mode uses. Since currently kernel mode floating
point usage can't be preempted and there are explicit preemption points in
the existing implementations this isn't so important for fp-stress but
when we readd preemption it will be good to try to exercise it.
When the arm64 accelerated crypto operations are implemented we can
relatively straightforwardly trigger kernel mode floating point usage by
using the crypto userspace API to hash data, using the splice() support
in an effort to minimise copying. We use /proc/crypto to check which
accelerated implementations are available, picking the first symmetric
hash we find. We run the kernel mode test unconditionally, replacing the
second copy of the FPSIMD testcase for systems with FPSIMD only. If we
don't think there are any suitable kernel mode implementations we fall back
to running another copy of fpsimd-stress.
There are a number issues with this approach, we don't actually verify
that we are using an accelerated (or even CPU) implementation of the
algorithm being tested and even with attempting to use splice() to
minimise copying there are sizing limits on how much data gets spliced
at once.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240521-arm64-fp-stress-kernel-v1-1-e38f107baad4@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch includes net_helper.sh into mptcp_lib.sh, uses the helper
wait_local_port_listen() defined in it to implement the similar mptcp
helper. This can drop some duplicate code.
It looks like this helper from net_helper.sh was originally coming from
MPTCP, but MPTCP selftests have not been updated to use it from this
shared place.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-6-e36986faac94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch includes lib.sh into mptcp_lib.sh, uses setup_ns helper
defined in lib.sh to set up namespaces in mptcp_lib_ns_init(), and
uses cleanup_ns to delete namespaces in mptcp_lib_ns_exit().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-5-e36986faac94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The helper setup_ns() doesn't work when a net namespace named "ns" is
passed to it.
For example, in net/mptcp/diag.sh, the name of the namespace is "ns". If
"setup_ns ns" is used in it, diag.sh fails with errors:
Invalid netns name "./mptcp_connect"
Cannot open network namespace "10000": No such file or directory
Cannot open network namespace "10000": No such file or directory
That is because "ns" is also a local variable in setup_ns, and it will
not set the value for the global variable that has been giving in
argument. To solve this, we could rename the variable, but it sounds
better to drop it, as we can resolve the name using the variable passed
in argument instead.
The other local variables -- "ns_list" and "ns_name" -- are more
unlikely to conflict with existing global variables. They don't seem to
be currently used in any other net selftests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-4-e36986faac94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It sounds good to mark the global netns variable as 'readonly', but Bash
doesn't allow the creation of local variables with the same name.
Because it looks like 'readonly' is mainly used here to check if a netns
with that name has already been set, it sounds fine to check if a
variable with this name has already been set instead. By doing that, we
avoid having to modify helpers from MPTCP selftests using the same
variable name as the one used to store the created netns name.
While at it, also avoid an unnecessary call to 'eval' to set a local
variable.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-3-e36986faac94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of only appending items to the list, removing them when the
netns has been deleted.
By doing that, we can make sure 'cleanup_all_ns()' is not trying to
remove already deleted netns.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-2-e36986faac94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding test to verify that when called from outside of the
trampoline provided by kernel, the uretprobe syscall will cause
calling process to receive SIGILL signal and the attached bpf
program is not executed.
Link: https://lore.kernel.org/all/20240611112158.40795-8-jolsa@kernel.org/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Adding test that creates uprobe consumer on uretprobe which changes some
of the registers. Making sure the changed registers are propagated to the
user space when the ureptobe syscall trampoline is used on x86_64.
To be able to do this, adding support to bpf_testmod to create uprobe via
new attribute file:
/sys/kernel/bpf_testmod_uprobe
This file is expecting file offset and creates related uprobe on current
process exe file and removes existing uprobe if offset is 0. The can be
only single uprobe at any time.
The uprobe has specific consumer that changes registers used in ureprobe
syscall trampoline and which are later checked in the test.
Link: https://lore.kernel.org/all/20240611112158.40795-7-jolsa@kernel.org/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add uretprobe syscall test that compares register values before
and after the uretprobe is hit. It also compares the register
values seen from attached bpf program.
Link: https://lore.kernel.org/all/20240611112158.40795-6-jolsa@kernel.org/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Adding return uprobe test for shadow stack and making sure it's
working properly. Borrowed some of the code from bpf selftests.
Link: https://lore.kernel.org/all/20240611112158.40795-5-jolsa@kernel.org/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
gcc requires -static-libasan in order to ensure that Address Sanitizer's
library is the first one loaded. However, this leads to build failures
on clang, when building via:
make LLVM=1 -C tools/testing/selftests
However, clang already does the right thing by default: it statically
links the Address Sanitizer if -fsanitize is specified. Therefore,
simply omit -static-libasan for clang builds. And leave behind a
comment, because the whole reason for static linking might not be
obvious.
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building with clang via:
make LLVM=1 -C tools/testing/selftests
two distinct failures occur:
1) gcc requires -static-libasan in order to ensure that Address
Sanitizer's library is the first one loaded. However, this leads to
build failures on clang, when building via:
make LLVM=1 -C tools/testing/selftests
However, clang already does the right thing by default: it statically
links the Address Sanitizer if -fsanitize is specified. Therefore, fix
this by simply omitting -static-libasan for clang builds. And leave
behind a comment, because the whole reason for static linking might not
be obvious.
2) clang won't accept invocations of this form, but gcc will:
$(CC) file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix the following warnings by adding return check and error messages.
statmount_test.c: In function ‘cleanup_namespace’:
statmount_test.c:128:9: warning: ignoring return value of ‘fchdir’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
128 | fchdir(orig_root);
| ^~~~~~~~~~~~~~~~~
statmount_test.c:129:9: warning: ignoring return value of ‘chroot’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
129 | chroot(".");
| ^~~~~~~~~~~
Signed-off-by: Amer Al Shanawany <amer.shanawany@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmIsRAAKCRDbK58LschI
g4SSAP0bkl6rPMn7zp1h+/l7hlvpp2aVOmasBTe8hIhAGUbluwD/TGq4sNsGgXFI
i4tUtFRhw8pOjy2guy6526qyJvBs8wY=
=WMhY
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-06-06
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).
The main changes are:
1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.
2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.
3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.
4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.
5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.
6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.
7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.
8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.
9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.
10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.
11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.
12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================
Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When detecting AMD PMU support for encoding "branch instructions retired"
as event 0xc2,0, simply check for Family 17h+ as all Zen CPUs support said
encoding, and AMD will maintain the encoding for backwards compatibility
on future CPUs.
Note, the kernel proper also interprets Family 17h+ as Zen (see the sole
caller of init_amd_zen_common()).
Suggested-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20240605050835.30491-1-manali.shukla@amd.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Do not create PT_LOAD program header for the kenel image when
the virtual memory informaton in OS_INFO data is not available.
That fixes stand-alone dump failures against kernels that do not
provide the virtual memory informaton
- Add KVM s390 shared zeropage selftest
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZmMO4xccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8ErcAQDLfDjQsjL3pJOaCuRqK2KyCgnD
azZSDzjKZ/C03MX/vgEA505txGFI5UthiVRHLR/GEZs6E7q+C5fuHexFPbG1XQg=
=dIuv
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Do not create PT_LOAD program header for the kenel image when the
virtual memory informaton in OS_INFO data is not available. That
fixes stand-alone dump failures against kernels that do not provide
the virtual memory informaton
- Add KVM s390 shared zeropage selftest
* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390x: selftests: Add shared zeropage test
s390/crash: Do not use VM info if os_info does not have it
bpf_map_lookup_elem() has been removed from do_test(), it makes the
sk_stg_map argument of do_test() useless. In addition, two exactly the
same opts are passed in all the places where do_test() is invoked, so
cli_opts argument can be dropped too.
This patch drops these two useless arguments of do_test() in bpf_tcp_ca.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7056eab111d78a05bce29d2821228dc93f240de4.1717054461.git.tanggeliang@kylinos.cn
The newly added helper start_test() can be used in test_dctcp_fallback()
too, to replace start_server_str() and connect_to_fd_opts(). In that
way, two network_helper_opts srv_opts and cli_opts are used instead of
the previously shared opts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/792ca3bb013fa06e618176da02d75e4f79a76733.1717054461.git.tanggeliang@kylinos.cn
This patch uses connect_to_fd_opts() instead of using connect_fd_to_fd()
and settcpca() in do_test() in prog_tests/bpf_tcp_ca.c to accept a struct
network_helper_opts argument.
Then define a dctcp dedicated post_socket_cb callback stg_post_socket_cb(),
invoking both settcpca() and bpf_map_update_elem() in it, and set it in
test_dctcp(). For passing map_fd into stg_post_socket_cb() callback, a new
member map_fd is added in struct cb_opts.
Add another "const struct network_helper_opts *cli_opts" to do_test() to
separate it from the server "opts".
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/876ec90430865bc468e3b7f6fb2648420b075548.1717054461.git.tanggeliang@kylinos.cn
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
and drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the same
UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the old
behavior for two cases where we started coalescing those messages with
normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting
to 6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mwEJ
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
Without this, the 'i' variable declared before could be overridden by
accident, e.g.
for i in "${@}"; do
__ksft_status_merge "${i}" ## 'i' has been modified
foo "${i}" ## using 'i' with an unexpected value
done
After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.
Fixes: 596c8819cb ("selftests: forwarding: Have RET track kselftest framework constants")
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.
The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.
Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-2-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If errexit is enabled ('set -e'), loopy_wait -- or busywait and others
using it -- will stop after the first failure.
Note that if the returned status of loopy_wait is checked, and even if
errexit is enabled, Bash will not stop at the first error.
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-1-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to commit 2b7deea3ec ("Revert "kvm: selftests: move base
kvm_util.h declarations to kvm_util_base.h"") kvm selftests now
requires explicitly including ucall_common.h when needed. The commit
added the directives everywhere they were needed at the time, but, by
merge time, new places had been merged for RISC-V. Add those now to
fix RISC-V's compilation.
Fixes: dee7ea42a1 ("Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240603122045.323064-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Fixed MAC addresses help with debugging as last four bytes identify the
network namespace.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240603093322.3150030-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixed MAC addresses help with debugging as last four bytes identify the
network namespace.
Moreover, it allows to mimic the real life setup with for example bridge
having the same MAC address on each port.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240603093322.3150030-2-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmAYPgAKCRDbK58LschI
g2XdAP9M8zYLRw4IG8DUFug7F+oqRPqgbs+Gvsf9YNl5/PSiTQEA6WKa/ObaG/W9
vre9VxhMWKgcMfzqZyztNHAiDm8R+QI=
=l7gV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-05
We've added 8 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 34 insertions(+), 35 deletions(-).
The main changes are:
1) Fix a potential use-after-free in bpf_link_free when the link uses
dealloc_deferred to free the link object but later still tests for
presence of link->ops->dealloc, from Cong Wang.
2) Fix BPF test infra to set the run context for rawtp test_run callback
where syzbot reported a crash, from Jiri Olsa.
3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude
it for the case of !CONFIG_FPROBE, also from Jiri Olsa.
4) Fix a Coverity static analysis report to not close() a link_fd of -1
in the multi-uprobe feature detector, from Andrii Nakryiko.
5) Revert support for redirect to any xsk socket bound to the same umem
as it can result in corrupted ring state which can lead to a crash when
flushing rings. A different approach will be pursued for bpf-next to
address it safely, from Magnus Karlsson.
6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused
BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko.
7) Fix a coccicheck warning in BPF devmap that iterator variable cannot
be NULL, from Thorsten Blum.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
Revert "xsk: Document ability to redirect to any socket bound to the same umem"
Revert "xsk: Support redirect to any socket bound to the same umem"
bpf: Set run context for rawtp test_run callback
bpf: Fix a potential use-after-free in bpf_link_free()
bpf, devmap: Remove unnecessary if check in for loop
libbpf: don't close(-1) in multi-uprobe feature detector
bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list
selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c
====================
Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pid filtering test will set the pid filters and make sure that both
function and function_graph tracing honors the filters. But the
function_graph tracer test was failing because the PID was not being
filtered properly. That's because the funcgraph-proc option wasn't getting
set. Without that option the PID is not shown.
Instead we get:
+ cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
3) ! 143.685 us | kernel_clone();
3) ! 127.055 us | kernel_clone();
1) ! 127.170 us | kernel_clone();
3) ! 126.840 us | kernel_clone();
When we should be getting:
+ cat trace
# tracer: function_graph
#
# CPU TASK/PID DURATION FUNCTION CALLS
# | | | | | | | | |
4) bash-939 | # 1070.009 us | kernel_clone();
4) bash-939 | # 1116.903 us | kernel_clone();
5) bash-939 | ! 976.133 us | kernel_clone();
5) bash-939 | ! 954.012 us | kernel_clone();
The test looks for the pids it is filtering and will fail if it can not
find them. Without fungraph-proc option set, it will not be displayed and
the test will fail.
Link: https://lore.kernel.org/all/Zl9JFnzKGuUM10X2@J2N7QTR9R3/
Link: https://lore.kernel.org/linux-trace-kernel/20240604152550.0c01d7cd@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35b944a997 ("selftests/ftrace: Add function_graph tracer to func-filter-pid test")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Let's test that we can have shared zeropages in our process as long as
storage keys are not getting used, that shared zeropages are properly
unshared (replaced by anonymous pages) once storage keys are enabled,
and that no new shared zeropages are populated after storage keys
were enabled.
We require the new pagemap interface to detect the shared zeropage.
On an old kernel (zeropages always disabled):
# ./s390x/shared_zeropage_test
TAP version 13
1..3
not ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
On a fixed kernel:
# ./s390x/shared_zeropage_test
TAP version 13
1..3
ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Testing of UFFDIO_ZEROPAGE can be added later.
[ agordeev: Fixed checkpatch complaint, added ucall_common.h include ]
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20240412084329.30315-1-david@redhat.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use the max mappable GPA via GuestPhysBits advertised by KVM to calculate
max_gfn. Currently some selftests (e.g. access_tracking_perf_test,
dirty_log_test...) add RAM regions close to max_gfn, so guest may access
GPA beyond its mappable range and cause infinite loop.
Adjust max_gfn in vm_compute_max_gfn() since x86 selftests already
overrides vm_compute_max_gfn() specifically to deal with goofy edge cases.
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240513014003.104593-1-tao1.su@linux.intel.com
[sean: tweak name, add comment and sanity check]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currrentl a 32 bit 1u value is being shifted more than 32 bits causing
overflow and incorrect checking of bits 32-63. Fix this by using the
BIT_ULL macro for shifting bits.
Detected by cppcheck:
sev_init2_tests.c:108:34: error: Shifting 32-bit value by 63 bits is
undefined behaviour [shiftTooManyBits]
Fixes: dfc083a181 ("selftests: kvm: add tests for KVM_SEV_INIT2")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240523154102.2236133-1-colin.i.king@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
hsr_redbox.sh test need to create bridge for testing. Add the missing
config CONFIG_BRIDGE in config file.
Fixes: eafbf0574e ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This may trigger the case fixed by commit 48c3b583bb ("mm/memblock:
fix overlapping allocation when doubling reserved array").
This is done by adding the 129th reserve region into memblock.memory. If
memblock_double_array() use this reserve region as new array, it fails.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240507075833.6346-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
The dummy entry is introduced in the initial implementation of lmb in
commit 7c8c6b9776 ("powerpc: Merge lmb.c and make MM initialization
use it.").
As the comment says the empty dummy entry is to simplify the code.
/* Create a dummy zero size LMB which will get coalesced away later.
* This simplifies the lmb_add() code below...
*/
While current code is reimplemented by Tejun in commit 784656f9c6
("memblock: Reimplement memblock_add_region()"). This empty dummy entry
seems not benefit the code any more.
Let's remove it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Paul Mackerras <paulus@ozlabs.org>
CC: Tejun Heo <tj@kernel.org>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240405015821.13411-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
I hit the following failure when running selftests with
internal backported upstream kernel:
test_ksyms:PASS:kallsyms_fopen 0 nsec
test_ksyms:FAIL:ksym_find symbol 'bpf_link_fops' not found
#123 ksyms:FAIL
In /proc/kallsyms, we have
$ cat /proc/kallsyms | grep bpf_link_fops
ffffffff829f0cb0 d bpf_link_fops.llvm.12608678492448798416
The CONFIG_LTO_CLANG_THIN is enabled in the kernel which is responsible
for bpf_link_fops.llvm.12608678492448798416 symbol name.
In prog_tests/ksyms.c we have
kallsyms_find("bpf_link_fops", &link_fops_addr)
and kallsyms_find() compares "bpf_link_fops" with symbols
in /proc/kallsyms in order to find the entry. With
bpf_link_fops.llvm.<hash> in /proc/kallsyms, the kallsyms_find()
failed.
To fix the issue, in kallsyms_find(), if a symbol has suffix
.llvm.<hash>, that suffix will be ignored for comparison.
This fixed the test failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240604180034.1356016-1-yonghong.song@linux.dev
bpf_cookie and find_vma are flaky in nested VMs, which is used by some CI
systems. It turns out these failures are caused by unreliable perf event
in nested VM. Fix these by:
1. Use PERF_COUNT_SW_CPU_CLOCK in find_vma;
2. Increase sample_freq in bpf_cookie.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org
This kselftest fixes update consists of fixes to build warnings
in several tests and fixes to ftrace tests.
-----BEGIN PGP SIGNATURE-----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=AsE4
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings in several tests and fixes to ftrace tests"
* tag 'linux_kselftest-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/futex: don't pass a const char* to asprintf(3)
selftests/futex: don't redefine .PHONY targets (all, clean)
selftests/tracing: Fix event filter test to retry up to 10 times
selftests/futex: pass _GNU_SOURCE without a value to the compiler
selftests/overlayfs: Fix build error on ppc64
selftests/openat2: Fix build warnings on ppc64
selftests: cachestat: Fix build warnings on ppc64
tracing/selftests: Fix kprobe event name test for .isra. functions
selftests/ftrace: Update required config
selftests/ftrace: Fix to check required event file
kselftest/alsa: Ensure _GNU_SOURCE is defined
Add a test that creates 3 instances and enables function_graph tracer in
each as well as the top instance, where each will enable a filter (but one
that traces all functions) and check that they are filtering properly.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190825.252845939@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function tracer is tested to see if pid filtering works. Add a test to
test function_graph tracer as well, but only if the function_graph tracer
is enabled for the top level or instance.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190825.083048115@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make sure global arrays of bpf_list_heads and fields of bpf_list_heads in
nested struct types work correctly.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-10-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure global arrays of bpf_rb_root and fields of bpf_rb_root in nested
struct types work correctly.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-9-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure that BPF programs can declare global kptr arrays and kptr fields
in struct types that is the type of a global variable or the type of a
nested descendant field in a global variable.
An array with only one element is special case, that it treats the element
like a non-array kptr field. Nested arrays are also tested to ensure they
are handled properly.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240523174202.461236-8-thinker.li@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Compile fix for cxl-test from missing linux/vmalloc.h
- Fix for memregion leaks in devm_cxl_add_region()
-----BEGIN PGP SIGNATURE-----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=GuxH
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
- Compile fix for cxl-test from missing linux/vmalloc.h
- Fix for memregion leaks in devm_cxl_add_region()
* tag 'cxl-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Fix memregion leaks in devm_cxl_add_region()
cxl/test: Add missing vmalloc.h for tools/testing/cxl/test/mem.c
bpf_map_lookup_elem is invoked in bpf_prog3() already, no need to invoke
it again. This patch drops it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/ea8458462b876ee445173e3effb535fd126137ed.1716446893.git.tanggeliang@kylinos.cn
The value of recv in msg_loop may be negative, like EWOULDBLOCK, so it's
necessary to check if it is positive before accumulating it to bytes_recvd.
Fixes: 16962b2404 ("bpf: sockmap, add selftests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/5172563f7c7b2a2e953cef02e89fc34664a7b190.1716446893.git.tanggeliang@kylinos.cn
The array size of map_fd[] is 9, not 8. This patch changes it as a more
general form: ARRAY_SIZE(map_fd).
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/0972529ee01ebf8a8fd2b310bdec90831c94be77.1716446893.git.tanggeliang@kylinos.cn
The program fds can be got by using bpf_program__fd(progs[]), then
prog_fd becomes useless. This patch drops it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/9a6335e4d8dbab23c0d8906074457ceddd61e74b.1716446893.git.tanggeliang@kylinos.cn
bpf_program__attach_sockmap() needs to take a parameter of type bpf_program
instead of an fd, so tx_prog_fd becomes useless. This patch uses a pointer
tx_prog to point to an item in progs[] array.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/23b37f932c547dd1ebfe154bbc0b0e957be21ee6.1716446893.git.tanggeliang@kylinos.cn
Switch attachments to bpf_link using bpf_program__attach_sockmap() instead
of bpf_prog_attach().
This patch adds a new array progs[] to replace prog_fd[] array, set in
populate_progs() for each program in bpf object.
And another new array links[] to save the attached bpf_link. It is
initalized as NULL in populate_progs, set as the return valuses of
bpf_program__attach_sockmap(), and detached by bpf_link__detach().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/32cf8376a810e2e9c719f8e4cfb97132ed2d1f9c.1716446893.git.tanggeliang@kylinos.cn
There's already a definition of i in run_options() at the beginning, no
need to define a new one in "if (tx_prog_fd > 0)" block.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/8d690682330a59361562bca75d6903253d16f312.1716446893.git.tanggeliang@kylinos.cn
The values of tx_prog_fd in run_options() should not be 0, so set it as -1
in else branch, and test it using "if (tx_prog_fd > 0)" condition, not
"if (tx_prog_fd)" or "if (tx_prog_fd >= 0)".
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/08b20ffc544324d40939efeae93800772a91a58e.1716446893.git.tanggeliang@kylinos.cn
'memslot_antagonist_args' is unused since the original
commit f73a344625 ("KVM: selftests: Add memslot modification stress
test").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240602235529.228204-1-linux@treblig.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
'key_t' is unused in a couple of files since the original commit 60dd49ea65
("selftests/bpf: Add test for bpf array map iterators"). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240602234112.225107-3-linux@treblig.org
'scale_test_def' is unused since commit 3762a39ce8 ("selftests/bpf: Split out
bpf_verif_scale selftests into multiple tests"). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240602234112.225107-2-linux@treblig.org
Add a selftest which checks that the sysctl is present in a netns,
that the value is read from the init one, and that it's readonly.
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://lore.kernel.org/r/20240530232722.45255-3-technoboy85@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZlntgBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbShXAA/3ecCnZWTkgHKSKQiS+t1nUkQmAgZ1Zzmm6v
UaJDCOBnAP9nAEfgEgMHZO1LVL38N6EWzexjnglFkZFHpT8gFwKtCw==
=R5nh
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang issues this warning:
futex_requeue_pi.c:403:17: warning: passing 'const char **' to parameter
of type 'char **' discards qualifiers in nested pointer types
[-Wincompatible-pointer-types-discards-qualifiers]
This warning fires because test_name is passed into asprintf(3), which
then changes it.
Fix this by simply removing the const qualifier. This is a local
automatic variable in a very short function, so there is not much need
to use the compiler to enforce const-ness at this scope.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: f17d8a87ec ("selftests: fuxex: Report a unique test name per run of futex_requeue_pi")
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The .PHONY targets "all" and "clean" are both already defined in the
file that is included in the very next line:
../lib.mk.
Remove this duplicate code.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add tests to check error codes when linking or renaming a mount root
directory. This previously triggered a kernel warning, but it is fixed
with the previous commit.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240516181935.1645983-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Commit eb50d0f250 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Verify whether a user space program is informed through epoll with EPOLLHUP
when a struct_ops object is detached.
The BPF code in selftests/bpf/progs/struct_ops_module.c has become
complex. Therefore, struct_ops_detach.c has been added to segregate the BPF
code for detachment tests from the BPF code for other tests based on the
recommendation of Andrii Nakryiko.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-6-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Yafang Shao
Pu Lehui
Tushar Vyavahare
Linus Torvalds
Zhu Jun
Lorenzo Bianconi
Benjamin Tissoires
Greg Kroah-Hartman
Michael Ellerman
David S. Miller
Thomas Weißschuh
Amer Al Shanawany
Sidhartha Kumar
Jakub Kicinski
Jakub Sitnicki
Isaku Yamahata
Reinette Chatre
Andrei Vagin
Joao Martins
Florian Westphal
Maxim Levitsky
Sean Christopherson
Mickaël Salaün
Josef Bacik
Petr Machata
Aaron Conole
Kuniyuki Iwashima
Jiri Olsa
Ma Ke
Matt Bobrowski
Takashi Iwai
Babu Moger
Clément Léger
Yao Xingtao
Yujie Liu
Alexey Dobriyan
Wen Yang
John Hubbard
aigourensheng
Andrii Nakryiko
Alexei Starovoitov
Daniel Borkmann
Oliver Upton
Alan Maguire
Mykyta Yatsenko
Cupertino Miranda
Paolo Bonzini
Taehee Yoo
Geliang Tang
Nícolas F. R. A. Prado
Sebastian Ott
Jiri Pirko
Kees Cook
Waiman Long
Jianguo Wu
Adrian Moreno
Simon Horman
Mathias Krause
Mark Brown
Marcos Paulo de Souza
Matthieu Baerts (NGI0)
Ira Weiny
Jeff Johnson
Mark Rutland
Yonghong Song
Amit Cohen
Vadim Fedorenko
Daniel Xu
Colin Ian King
Dev Jain
Ryan Sullivan
YonglongLi
Manali Shukla
Ido Schimmel
Andrew Jones
Lukasz Majewski
Steven Rostedt (Google)
David Hildenbrand
Tao Su
Hangbin Liu
Wei Yang
Song Liu
Kui-Feng Lee
Dr. David Alan Gilbert
Matteo Croce
Masami Hiramatsu (Google)