patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmaRQh0ACgkQqDIjiipP
6E+rfQgAqkAWZ9BjswxV8Fg+Hj+a1cSohKjDczqitQF5rJm25X5VvMwlXVa3XQGm
yemh4tKPpll02LOiYCTyqOWzNrkVS9VsoBd5rrYjRX5aSv7UD35EXklLj4P/INwX
O9CRGD6aK4Xbw66xxheYHSSh+2iRs2x2mq61+/VdcIBlAwpQo+vx7McRoJZZI+2t
NFIXw8RF5dDlmmAaqiB0WnPAtcOK3SDo9fu1LEAX1ZAzvbZriLo7XLnL7ibySWVe
BW1n7Ore6PN5Dvz7jMfTsOQsgAlVv6MPfp/s4EDqMfBLVqXNirzXrdhiee/ahnYP
vyzQyU5HPCMiIYS45mhJF0OyDd3wyw==
=wuYA
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.11-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event driver updates from Daniel Lezcano:
- Remove unnecessary local variables initialization as they will be
initialized in the code path anyway right after on the ARM arch
timer and the ARM global timer (Li kunyu)
- Fix a race condition in the interrupt leading to a deadlock on the
SH CMT driver. Note that this fix was not tested on the platform
using this timer but the fix seems reasonable enough to be picked
confidently (Niklas Söderlund)
- Increase the rating of the gic-timer and use the configured width
clocksource register on the MIPS architecture (Jiaxun Yang)
- Add the DT bindings for the TMU on the Renesas platforms (Geert
Uytterhoeven)
- Add the DT bindings for the SOPHGO SG2002 clint on RiscV (Thomas
Bonnefille)
- Add the rtl-otto timer driver along with the DT bindings for the
Realtek platform (Chris Packham)
Link: https://lore.kernel.org/all/91cd05de-4c5d-4242-a381-3b8a4fe6a2a2@linaro.org
Since the kernel's 'ethtool_keee' structure is in use, the internal
'eee_advert' field becomes pointless and can be removed.
This patch comes to clean up this redundant code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We are moving away from the Sourceforge email address. Rather than
removing or updating the email for the affected entries, remove the
MODULE_AUTHOR altogether as its usage is incorrect [1].
Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 01cf893bf0 ("net: intel: i40e/igc: Remove setting Autoneg in
EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate
ethtool_keee structure initialization. When "ethtool --show <device>"
(get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden.
Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE
specification that allows reporting Energy Efficient Ethernet capabilities.
Examples:
Before fix:
ethtool --show-eee enp174s0
EEE settings for enp174s0:
EEE status: not supported
After fix:
EEE settings for enp174s0:
EEE status: disabled
Tx LPI: disabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Fixes: 01cf893bf0 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core code now provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
Replace the direct conversion by filling in the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-5-lakshmi.sowjanya.d@intel.com
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
-----BEGIN PGP SIGNATURE-----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=Pa8W
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
During successful probe, igc logs this:
[ 5.133667] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The reason is that igc_ptp_init() is called very early, even before
register_netdev() has been called. So the netdev_info() call works
on a partially uninitialized netdev.
Fix this by calling igc_ptp_init() after register_netdev(), right
after the media autosense check, just as in igb. Add a comment,
just as in igb.
Now the log message is fine:
[ 5.200987] igc 0000:01:00.0 eth0: PHC added
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
XSk infra's been using its own DMA sync shortcut to try avoiding
redundant function calls. Now that there is a generic one, remove
the custom implementation and rely on the generic helpers.
xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore,
remove it.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support to per-packet Tx hardware timestamp request to
AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
user needs to enable Tx HW timestamp capability via igc_ioctl() with
SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request.
Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
(adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
four sets of timestamping registers. *skb and *xsk_tx_buffer pointers
are used to indicate whether the timestamping register is already occupied.
Furthermore, a boolean variable named xsk_pending_ts is used to hold the
transmit completion until the tx hardware timestamp is ready. This is
because, for i225/i226, the timestamp notification event comes some time
after the transmit completion event. The driver will retrigger hardware irq
to clean the packet after retrieve the tx hardware timestamp.
Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook
to the metadata location of the transmit packet. When the Tx timestamp
interrupt is fired, the interrupt handler will copy the value of Tx hwts
into metadata location via xsk_tx_metadata_complete().
This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel ADL-S platform. Below are the test steps and results.
Test Step 1: Run xdp_hw_metadata app
./xdp_hw_metadata <iface> > /dev/shm/result.log
Test Step 2: Enable Tx hardware timestamp
hwstamp_ctl -i <iface> -t 1 -r 1
Test Step 3: Run ptp4l and phc2sys for time synchronization
Test Step 4: Generate UDP packets with 1ms interval for 10s
trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000
Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic
Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic
Based on iperf3 results below, the impact of holding tx completion to
throughput is not observable.
Result of last UDP packet (no. 10000) in Step 4:
poll: 1 (0) skip=99 fail=0 redir=10000
xsk_ring_cons__peek: 1
0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP
rx_hash: 0x2049BE1D with RSS type:0x1
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6
0x5640a37972d0: complete tx idx=9999 addr=f010
HW TX-complete-time: 1679819246793036971 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec)
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec)
0x5640a37972d0: complete rx idx=10127 addr=f2110
Result of iperf3 without tx hwts request in step 5:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.05 sec 2.74 GBytes 2.34 Gbits/sec receiver
Result of iperf3 running parallel with trafgen command in step 6:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 2.74 GBytes 2.34 Gbits/sec receiver
Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240424210256.3440903-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Roman reports a deadlock on unplug of a Thunderbolt docking station
containing an Intel I225 Ethernet adapter.
The root cause is that led_classdev's for LEDs on the adapter are
registered such that they're device-managed by the netdev. That
results in recursive acquisition of the rtnl_lock() mutex on unplug:
When the driver calls unregister_netdev(), it acquires rtnl_lock(),
then frees the device-managed resources. Upon unregistering the LEDs,
netdev_trig_deactivate() invokes unregister_netdevice_notifier(),
which tries to acquire rtnl_lock() again.
Avoid by using non-device-managed LED registration.
Stack trace for posterity:
schedule+0x6e/0xf0
schedule_preempt_disabled+0x15/0x20
__mutex_lock+0x2a0/0x750
unregister_netdevice_notifier+0x40/0x150
netdev_trig_deactivate+0x1f/0x60 [ledtrig_netdev]
led_trigger_set+0x102/0x330
led_classdev_unregister+0x4b/0x110
release_nodes+0x3d/0xb0
devres_release_all+0x8b/0xc0
device_del+0x34f/0x3c0
unregister_netdevice_many_notify+0x80b/0xaf0
unregister_netdev+0x7c/0xd0
igc_remove+0xd8/0x1e0 [igc]
pci_device_remove+0x3f/0xb0
Fixes: ea578703b0 ("igc: Add support for LEDs on i225/i226")
Reported-by: Roman Lozko <lozko.roma@gmail.com>
Closes: https://lore.kernel.org/r/CAEhC_B=ksywxCG_+aQqXUrGEgKq+4mqnSV8EBHOKbC3-Obj9+Q@mail.gmail.com/
Reported-by: "Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/r/ZhRD3cOtz5i-61PB@mail-itl/
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240422204503.225448-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8c5ad0dae9 ("igc: Add ethtool support") added ethtool_ops.begin() and
.complete(), which used pm_runtime_get_sync() to resume suspended devices
before any ethtool_ops callback and allow suspend after it completed.
Subsequently, f32a213765 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.
Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Following the corresponding discussion [1] and [2] refactor the 'igc_open'
method and avoid taking the rtnl_lock() during the 'igc_resume' method.
The rtnl_lock is held by the upper layer and could lead to the deadlock
during resuming from a runtime power management flow. Notify the stack of
the actual queue counts 'netif_set_real_num_*_queues' outside the
'_igc_open' wrapper. This notification doesn't have to be called on each
resume.
Test:
1. Disconnect the ethernet cable
2. Enable the runtime power management via file system:
echo auto > /sys/devices/pci0000\.../power/control
3. Check the device state (lspci -s <device> -vvv | grep -i Status)
Link: https://lore.kernel.org/netdev/20231206113934.8d7819857574.I2deb5804
ef1739a2af307283d320ef7d82456494@changeid/#r [1]
Link: https://lore.kernel.org/netdev/20211125074949.5f897431@kicinski-fedo
ra-pc1c0hjn.dhcp.thefacebook.com/t/ [2]
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Switch the Intel networking drivers to use the new power management ops
declaration formats and macros, which allows us to drop __maybe_unused,
as well as a bunch of ifdef checking CONFIG_PM.
This is safe to do because the compiler drops the unused functions,
verified by checking for any of the power management function symbols
being present in System.map for a build without CONFIG_PM.
If a driver has runtime PM, define the ops with pm_ptr(), and if the
driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of
the macros for declaring the members of the pm_ops structs.
Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on
x64_64.
Reviewed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility
of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is
implied. The only practical choice the caller has is whether to
set __GFP_NOWARN. But that's a false choice, too, allocation failures
in atomic context will happen, and printing warnings in logs,
effectively for a packet drop, is both too much and very likely
non-actionable.
This leads me to a conclusion that most uses of napi_alloc_skb()
are simply misguided, and should use __GFP_NOWARN in the first
place. We also have a "standard" way of reporting allocation
failures via the queue stat API (qstats::rx-alloc-fail).
The direct motivation for this patch is that one of the drivers
used at Meta calls napi_alloc_skb() (so prior to this patch without
__GFP_NOWARN), and the resulting OOM warning is the top networking
warning in our fleet.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The initial igc Tx timestamping implementation used only one register for
retrieving Tx timestamps. Commit 3ed247e789 ("igc: Add support for
multiple in-flight TX timestamps") added support for utilizing all four of
them e.g., for multiple domain support. Remove the stale comment/FIXME.
Fixes: 3ed247e789 ("igc: Add support for multiple in-flight TX timestamps")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix "double" clearing of interrupts, which can cause external events
or timestamps to be missed.
The IGC_TSIRC Time Sync Interrupt Cause register can be cleared in two
ways, by either reading it or by writing '1' into the specific cause
bit. This is documented in section 8.16.1.
The following flow was used:
1. read IGC_TSIRC into 'tsicr';
2. handle the interrupts present in 'tsirc' and mark them in 'ack';
3. write 'ack' into IGC_TSICR;
As both (1) and (3) will clear the interrupt cause, if the same
interrupt happens again between (1) and (3) it will be ignored,
causing events to be missed.
Remove the extra clear in (3).
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp
Fixes: 4ff3203610 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
struct net_device poll_dev in struct igc_q_vector was added
in one of the initial commits, but never used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Energy Efficient Ethernet should always be negotiated with the link
peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for
supported, advertised or lp_advertised, since it is
assumed. Additionally, ethtool(1) ignores the set bit, and no other
driver sets this.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for LEDs on i225/i226. The LEDs can be controlled via sysfs
from user space using the netdev trigger. The LEDs are named as
igc-<bus><device>-<led> to be easily identified.
Offloading link speed and activity are supported. Other modes are simulated
in software by using on/off. Tested on Intel i225.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213184138.1483968-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PHY_CONTROL register works as defined in the IEEE 802.3 specification
(IEEE 802.3-2008 22.2.4.1). Tidy up the temporary workaround.
User impact: PHY can now be powered down when the ethernet link is down.
Testing hints: ip link set down <device> (or just disconnect the
ethernet cable).
Oldest tested NVM version is: 1045:740.
Fixes: 5586838fe9 ("igc: Add code for PHY support")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All filtering parameters such as EtherType and VLAN TCI are stored in host
byte order except for the VLAN EtherType. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All igc filter implementations use netdev_*() printing functions except for
the flex filters. Unify it.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use reverse xmas tree coding style convention in igc_add_flex_filter().
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This is in preparation of using the existing names for linkmode
bitmaps.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc)
This series contains updates to i40e, ice, and igc drivers.
Ke Xiao fixes use after free for unicast filters on i40e.
Andrii restores VF MSI-X flag after PCI reset on i40e.
Paul corrects admin queue link status structure to fulfill firmware
expectations for ice.
Rodrigo Cataldo corrects value used for hicredit calculations on igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
====================
Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.
Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.
Update hicredit accordingly.
Fixes: 1ab011b0bf ("igc: Add support for CBS offloading")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Rodrigo Cataldo <rodrigo.cadore@l-acoustics.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.
For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 2b477d057e ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x0 mask: 0xffff
| VLAN: 0x1 mask: 0x1fff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 7991487ecb ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.
Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
Fixes: 2b477d057e ("igc: Integrate flex filter into ethtool ops")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor the igc driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@get@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor igc driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This series is introducing the use of FIELD_GET and FIELD_PREP which
requires bitfield.h to be included. Fix all the includes in this one
change, and rearrange includes into alphabetical order to ease
readability and future maintenance.
virtchnl.h and it's usage was modified to have it's own includes as it
should. This required including bits.h for virtchnl.h.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch converts some basic cases of ethtool_sprintf() to
ethtool_puts().
The conversions are used in cases where ethtool_sprintf() was being used
with just two arguments:
| ethtool_sprintf(&data, buffer[i].name);
or when it's used with format string: "%s"
| ethtool_sprintf(&data, "%s", buffer[i].name);
which both now become:
| ethtool_puts(&data, buffer[i].name);
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds
Jakub Kicinski
Kory Maincent
Thomas Gleixner
Sasha Neftin
Tony Nguyen
Andy Shevchenko
Corinna Vinschen
Alexander Lobakin
Eric Dumazet
Song Yoong Siang
Lukas Wunner
Bjorn Helgaas
Jesse Brandeburg
Kurt Kanzenbach
Vinicius Costa Gomes
Florian Kauer
Andrew Lunn
Heiner Kallweit
Rodrigo Cataldo
Ahmed Zaki
justinstitt@google.com