mirror of https://github.com/torvalds/linux.git
477 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
ecd83bcbed |
x86/cpu changes for v6.10:
- Rework the x86 CPU vendor/family/model code: introduce the 'VFM'
value that is an 8+8+8 bit concatenation of the vendor/family/model
value, and add macros that work on VFM values. This simplifies the
addition of new Intel models & families, and simplifies existing
enumeration & quirk code.
- Add support for the AMD 0x80000026 leaf, to better parse topology
information.
- Optimize the NUMA allocation layout of more per-CPU data structures
- Improve the workaround for AMD erratum 1386
- Clear TME from /proc/cpuinfo as well, when disabled by the firmware
- Improve x86 self-tests
- Extend the mce_record tracepoint with the ::ppin and ::microcode fields
- Implement recovery for MCE errors in TDX/SEAM non-root mode
- Misc cleanups and fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Zrlk
-----END PGP SIGNATURE-----
Merge tag 'x86-cpu-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
- Rework the x86 CPU vendor/family/model code: introduce the 'VFM'
value that is an 8+8+8 bit concatenation of the vendor/family/model
value, and add macros that work on VFM values. This simplifies the
addition of new Intel models & families, and simplifies existing
enumeration & quirk code.
- Add support for the AMD 0x80000026 leaf, to better parse topology
information
- Optimize the NUMA allocation layout of more per-CPU data structures
- Improve the workaround for AMD erratum 1386
- Clear TME from /proc/cpuinfo as well, when disabled by the firmware
- Improve x86 self-tests
- Extend the mce_record tracepoint with the ::ppin and ::microcode fields
- Implement recovery for MCE errors in TDX/SEAM non-root mode
- Misc cleanups and fixes
* tag 'x86-cpu-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/mm: Switch to new Intel CPU model defines
x86/tsc_msr: Switch to new Intel CPU model defines
x86/tsc: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/resctrl: Switch to new Intel CPU model defines
x86/microcode/intel: Switch to new Intel CPU model defines
x86/mce: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/cpu/intel_epb: Switch to new Intel CPU model defines
x86/aperfmperf: Switch to new Intel CPU model defines
x86/apic: Switch to new Intel CPU model defines
perf/x86/msr: Switch to new Intel CPU model defines
perf/x86/intel/uncore: Switch to new Intel CPU model defines
perf/x86/intel/pt: Switch to new Intel CPU model defines
perf/x86/lbr: Switch to new Intel CPU model defines
perf/x86/intel/cstate: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/cpu/vfm: Update arch/x86/include/asm/intel-family.h
x86/cpu/vfm: Add new macros to work with (vendor/family/model) values
...
|
|
|
Linus Torvalds
|
9d8e0d52a2 |
x86/boot changes for v6.10:
- Move the kernel cmdline setup earlier in the boot process (again),
to address a split_lock_detect= boot parameter bug.
- Ignore relocations in .notes sections
- Simplify boot stack setup
- Re-introduce a bootloader quirk wrt. CR4 handling
- Miscellaneous cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=p7K3
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Move the kernel cmdline setup earlier in the boot process (again),
to address a split_lock_detect= boot parameter bug
- Ignore relocations in .notes sections
- Simplify boot stack setup
- Re-introduce a bootloader quirk wrt CR4 handling
- Miscellaneous cleanups & fixes
* tag 'x86-boot-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Clear most of CR4 in startup_64(), except PAE, MCE and LA57
x86/boot: Move kernel cmdline setup earlier in the boot process (again)
x86/build: Clean up arch/x86/tools/relocs.c a bit
x86/boot: Ignore relocations in .notes sections in walk_relocs() too
x86: Rename __{start,end}_init_task to __{start,end}_init_stack
x86/boot: Simplify boot stack setup
|
|
|
Linus Torvalds
|
d791a4da6b |
x86/asm changes for v6.10:
- Clean up & fix asm() operand modifiers & constraints - Misc cleanups Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmZBtWERHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jRoBAAlADXtYYBExQvD0dFRzgnAlm8c7Tr1HRg F+fGfUJLZEItfw2NW2SvuM4kuHVH84hleifiLSRVUUdWE6hvsa9WjdE1Pca5Za7H 80LaFUbHJxs5/iOUMn/2NpCb5QnSxEpNzS857hR44zvXnigISH71SMhAi4metp2p H14FSZ1l8iJf9ZxPzgCCrou+2OBfvPhMEY43r7yPeqO2MOT2TiB2C+IH8Evr3QSL YS2jCyLq7YhLax1kgGNzb+O2ICdWJC7W9H4729wv+HCzaUdmAmGY1f3aFwV2zPRJ pD87DJOX8eryJinws6jI7DBjHoIm+thLhvT0YE9JOxII//tvs3/sJ2jB1SQqMjrn IOADKMRkKhJUy/47Y0vaqwJPNa+XtVtONiJG6QEw0A0ynnSBIioFkjIN/vJkeupM bBK/dnKtAhCzOe3Z2cpIUp1fwaUvf56ssBpfHQSqb5mRmiXVeBu2Y1w7lTyBM2dx 1DQZlEbYOI6YAyOyv2R05pvR3Oe6uPYJhr7LkR3BaRLtqiaUHgM/C1RllIPnMuuV o9lSfCzzL0gUKEIGZBV0jXrnO0lfqPM8wu3FNdJ1ATJSDVscSRVP5ptT3qaXmkAT Vo0iOfJpP4FcJ4qjzWunbx+KmhfNnwgzz1MlMtd2NvBV+oBuJiLL/yOnGLWiFpVv kk7Qy8dm/CU= =gHFt -----END PGP SIGNATURE----- Merge tag 'x86-asm-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: - Clean up & fix asm() operand modifiers & constraints - Misc cleanups * tag 'x86-asm-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Remove a superfluous newline in _static_cpu_has() x86/asm/64: Clean up memset16(), memset32(), memset64() assembly constraints in <asm/string_64.h> x86/asm: Use "m" operand constraint in WRUSSQ asm template x86/asm: Use %a instead of %P operand modifier in asm templates x86/asm: Use %c/%n instead of %P operand modifier in asm templates x86/asm: Remove %P operand modifier from altinstr asm templates |
|
|
Linus Torvalds
|
02b670c1f8 |
x86/mm: Remove broken vsyscall emulation code from the page fault code
The syzbot-reported stack trace from hell in this discussion thread
actually has three nested page faults:
https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com
... and I think that's actually the important thing here:
- the first page fault is from user space, and triggers the vsyscall
emulation.
- the second page fault is from __do_sys_gettimeofday(), and that should
just have caused the exception that then sets the return value to
-EFAULT
- the third nested page fault is due to _raw_spin_unlock_irqrestore() ->
preempt_schedule() -> trace_sched_switch(), which then causes a BPF
trace program to run, which does that bpf_probe_read_compat(), which
causes that page fault under pagefault_disable().
It's quite the nasty backtrace, and there's a lot going on.
The problem is literally the vsyscall emulation, which sets
current->thread.sig_on_uaccess_err = 1;
and that causes the fixup_exception() code to send the signal *despite* the
exception being caught.
And I think that is in fact completely bogus. It's completely bogus
exactly because it sends that signal even when it *shouldn't* be sent -
like for the BPF user mode trace gathering.
In other words, I think the whole "sig_on_uaccess_err" thing is entirely
broken, because it makes any nested page-faults do all the wrong things.
Now, arguably, I don't think anybody should enable vsyscall emulation any
more, but this test case clearly does.
I think we should just make the "send SIGSEGV" be something that the
vsyscall emulation does on its own, not this broken per-thread state for
something that isn't actually per thread.
The x86 page fault code actually tried to deal with the "incorrect nesting"
by having that:
if (in_interrupt())
return;
which ignores the sig_on_uaccess_err case when it happens in interrupts,
but as shown by this example, these nested page faults do not need to be
about interrupts at all.
IOW, I think the only right thing is to remove that horrendously broken
code.
The attached patch looks like the ObviouslyCorrect(tm) thing to do.
NOTE! This broken code goes back to this commit in 2011:
|
|
Tony Luck
|
a9d0adce69 |
x86/cpu/vfm: Add/initialize x86_vfm field to struct cpuinfo_x86
Refactor struct cpuinfo_x86 so that the vendor, family, and model fields are overlaid in a union with a 32-bit field that combines all three (together with a one byte reserved field in the upper byte). This will make it easy, cheap, and reliable to check all three values at once. See https://lore.kernel.org/r/Zgr6kT8oULbnmEXx@agluck-desk3 for why the ordering is (low-to-high bits): (vendor, family, model) [ bp: Move comments over the line, add the backstory about the particular order of the fields. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240416211941.9369-2-tony.luck@intel.com |
|
Brian Gerst
|
2cb16181a1 |
x86/boot: Simplify boot stack setup
Define the symbol __top_init_kernel_stack instead of duplicating the offset from __end_init_task in multiple places. Signed-off-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20240321180506.89030-1-brgerst@gmail.com |
|
Uros Bizjak
|
a3ff53167c |
x86/asm: Remove %P operand modifier from altinstr asm templates
The "P" asm operand modifier is a x86 target-specific modifier. For x86_64, when used with a symbol reference, the "%P" modifier emits "sym" instead of "sym(%rip)". This property is currently used to prevent %RIP-relative addressing in .altinstr sections. %RIP-relative addresses are nowadays correctly handled in .altinstr sections, so remove %P operand modifier from altinstr asm templates. Also note that unlike GCC, clang emits %rip-relative symbol reference with "P" asm operand modifier, so the patch also unifies symbol handling with both compilers. No functional changes intended. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lore.kernel.org/r/20240319104418.284519-2-ubizjak@gmail.com |
|
|
Linus Torvalds
|
685d982112 |
Core x86 changes for v6.9:
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmXvB0gRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1jUqRAAqnEQPiabF5acQlHrwviX+cjSobDlqtH5
9q2AQy9qaEHapzD0XMOxvFye6XIvehGOGxSPvk6CoviSxBND8rb56lvnsEZuLeBV
Bo5QSIL2x42Zrvo11iPHwgXZfTIusU90sBuKDRFkYBAxY3HK2naMDZe8MAsYCUE9
nwgHF8DDc/NYiSOXV8kosWoWpNIkoK/STyH5bvTQZMqZcwyZ49AIeP1jGZb/prbC
e/rbnlrq5Eu6brpM7xo9kELO0Vhd34urV14KrrIpdkmUKytW2KIsyvW8D6fqgDBj
NSaQLLcz0pCXbhF+8Nqvdh/1coR4L7Ymt08P1rfEjCsQgb/2WnSAGUQuC5JoGzaj
ngkbFcZllIbD9gNzMQ1n4Aw5TiO+l9zxCqPC/r58Uuvstr+K9QKlwnp2+B3Q73Ft
rojIJ04NJL6lCHdDgwAjTTks+TD2PT/eBWsDfJ/1pnUWttmv9IjMpnXD5sbHxoiU
2RGGKnYbxXczYdq/ALYDWM6JXpfnJZcXL3jJi0IDcCSsb92xRvTANYFHnTfyzGfw
EHkhbF4e4Vy9f6QOkSP3CvW5H26BmZS9DKG0J9Il5R3u2lKdfbb5vmtUmVTqHmAD
Ulo5cWZjEznlWCAYSI/aIidmBsp9OAEvYd+X7Z5SBIgTfSqV7VWHGt0BfA1heiVv
F/mednG0gGc=
=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
|
|
Linus Torvalds
|
fcc196579a |
Misc cleanups, including a large series from Thomas Gleixner to
cure Sparse warnings. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmXvAFQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hkDRAAwASVCQ88kiGqNQtHibXlK54mAFGsc0xv T8OPds15DUzoLg/y8lw0X0DHly6MdGXVmygybejNIw2BN4lhLjQ7f4Ria7rv7LDy FcI1jfvysEMyYRFHGRefb/GBFzuEfKoROwf+QylGmKz0ZK674gNMngsI9pwOBdbe wElq3IkHoNuTUfH9QA4BvqGam1n122nvVTop3g0PMHWzx9ky8hd/BEUjXFZhfINL zZk3fwUbER2QYbhHt+BN2GRbdf2BrKvqTkXpKxyXTdnpiqAo0CzBGKerZ62H82qG n737Nib1lrsfM5yDHySnau02aamRXaGvCJUd6gpac1ZmNpZMWhEOT/0Tr/Nj5ztF lUAvKqMZn/CwwQky1/XxD0LHegnve0G+syqQt/7x7o1ELdiwTzOWMCx016UeodzB yyHf3Xx9J8nt3snlrlZBaGEfegg9ePLu5Vir7iXjg3vrloUW8A+GZM62NVxF4HVV QWF80BfWf8zbLQ/OS1382t1shaioIe5pEXzIjcnyVIZCiiP2/5kP2O6P4XVbwVlo Ca5eEt8U1rtsLUZaCzI2ZRTQf/8SLMQWyaV+ZmkVwcVdFoARC31EgdE5wYYoZOf6 7Vl+rXd+rZCuTWk0ZgznCZEm75aaqukaQCBa2V8hIVociLFVzhg/Tjedv7s0CspA hNfxdN1LDZc= =0eJ7 -----END PGP SIGNATURE----- Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc cleanups, including a large series from Thomas Gleixner to cure sparse warnings" * tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Drop unused declaration of proc_nmi_enabled() x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address() x86/percpu: Cure per CPU madness on UP smp: Consolidate smp_prepare_boot_cpu() x86/msr: Add missing __percpu annotations x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h> perf/x86/amd/uncore: Fix __percpu annotation x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP) x86/apm_32: Remove dead function apm_get_battery_status() x86/insn-eval: Fix function param name in get_eff_addr_sib() |
|
|
Linus Torvalds
|
720c857907 |
Support for x86 Fast Return and Event Delivery (FRED):
FRED is a replacement for IDT event delivery on x86 and addresses most of
the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved in
nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested exceptions
as the interrupt stack mechanism rewinds the stack on each entry which
requires a massive effort in the low level entry of #NMI code to handle
this.
3) No hardware distinction between entry from kernel or from user which
makes establishing kernel context more complex than it needs to be
especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which is a
problem when the perf NMI takes a fault when collecting a stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion on
large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save exception
cause registers. This ensures that the meta information for each
exception is preserved on stack and avoids the extra complexity of
preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS BASE
handling which is required to establish kernel context for per CPU
variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the return
from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design because it
uses a central entry points for kernel and user space and the CPUstores
the entry type (exception, trap, interrupt, syscall) on the entry stack
along with the vector number. The entry code has to demultiplex this
information, but this removes the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have information
pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs. the existing IDT
implementation to the extent possible and the deviation in hot paths like
context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the extended
stack frame and the hardware based GS BASE swichting and therefore have no
impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are know outstanding problems.
-----BEGIN PGP SIGNATURE-----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=Ib7w
-----END PGP SIGNATURE-----
Merge tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED support from Thomas Gleixner:
"Support for x86 Fast Return and Event Delivery (FRED).
FRED is a replacement for IDT event delivery on x86 and addresses most
of the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved
in nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested
exceptions as the interrupt stack mechanism rewinds the stack on
each entry which requires a massive effort in the low level entry
of #NMI code to handle this.
3) No hardware distinction between entry from kernel or from user
which makes establishing kernel context more complex than it needs
to be especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
is a problem when the perf NMI takes a fault when collecting a
stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion
on large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save
exception cause registers. This ensures that the meta information
for each exception is preserved on stack and avoids the extra
complexity of preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS
BASE handling which is required to establish kernel context for
per CPU variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the
return from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design
because it uses a central entry points for kernel and user space
and the CPUstores the entry type (exception, trap, interrupt,
syscall) on the entry stack along with the vector number. The
entry code has to demultiplex this information, but this removes
the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have
information pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs the existing IDT
implementation to the extent possible and the deviation in hot paths
like context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the
extended stack frame and the hardware based GS BASE swichting and
therefore have no impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are no outstanding problems"
* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/fred: Fix init_task thread stack pointer initialization
MAINTAINERS: Add a maintainer entry for FRED
x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
x86/fred: Invoke FRED initialization code to enable FRED
x86/fred: Add FRED initialization functions
x86/syscall: Split IDT syscall setup code into idt_syscall_init()
KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
x86/traps: Add sysvec_install() to install a system interrupt handler
x86/fred: FRED entry/exit and dispatch code
x86/fred: Add a machine check entry stub for FRED
x86/fred: Add a NMI entry stub for FRED
x86/fred: Add a debug fault entry stub for FRED
x86/idtentry: Incorporate definitions/declarations of the FRED entries
x86/fred: Make exc_page_fault() work for FRED
x86/fred: Allow single-step trap and NMI when starting a new task
x86/fred: No ESPFIX needed when FRED is enabled
...
|
|
Xin Li (Intel)
|
c416b5bac6 |
x86/fred: Fix init_task thread stack pointer initialization
As TOP_OF_KERNEL_STACK_PADDING was defined as 0 on x86_64, it went unnoticed that the initialization of the .sp field in INIT_THREAD and some calculations in the low level startup code do not take the padding into account. FRED enabled kernels require a 16 byte padding, which means that the init task initialization and the low level startup code use the wrong stack offset. Subtract TOP_OF_KERNEL_STACK_PADDING in all affected places to adjust for this. Fixes: |
|
Thomas Gleixner
|
35ce64922c |
x86/idle: Select idle routine only once
The idle routine selection is done on every CPU bringup operation and has a guard in place which is effective after the first invocation, which is a pointless exercise. Invoke it once on the boot CPU and mark the related functions __init. The guard check has to stay as xen_set_default_idle() runs early. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/87edcu6vaq.ffs@tglx |
|
|
Thomas Gleixner
|
71eb4893cf |
x86/percpu: Cure per CPU madness on UP
On UP builds Sparse complains rightfully about accesses to cpu_info with per CPU accessors: cacheinfo.c:282:30: sparse: warning: incorrect type in initializer (different address spaces) cacheinfo.c:282:30: sparse: expected void const [noderef] __percpu *__vpp_verify cacheinfo.c:282:30: sparse: got unsigned int * The reason is that on UP builds cpu_info which is a per CPU variable on SMP is mapped to boot_cpu_info which is a regular variable. There is a hideous accessor cpu_data() which tries to hide this, but it's not sufficient as some places require raw accessors and generates worse code than the regular per CPU accessors. Waste sizeof(struct x86_cpuinfo) memory on UP and provide the per CPU cpu_info unconditionally. This requires to update the CPU info on the boot CPU as SMP does. (Ab)use the weakly defined smp_prepare_boot_cpu() function and implement exactly that. This allows to use regular per CPU accessors uncoditionally and paves the way to remove the cpu_data() hackery. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240304005104.622511517@linutronix.de |
|
|
Thomas Gleixner
|
5323922f50 |
x86/msr: Add missing __percpu annotations
Sparse rightfully complains about using a plain pointer for per CPU accessors: msr-smp.c:15:23: sparse: warning: incorrect type in initializer (different address spaces) msr-smp.c:15:23: sparse: expected void const [noderef] __percpu *__vpp_verify msr-smp.c:15:23: sparse: got struct msr * Add __percpu annotations to the related datastructure and function arguments to cure this. This also cures the related sparse warnings at the callsites in drivers/edac/amd64_edac.c. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240304005104.513181735@linutronix.de |
|
|
Thomas Gleixner
|
154fcf3a78 |
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
To clean up the per CPU insanity of UP which causes sparse to be rightfully unhappy and prevents the usage of the generic per CPU accessors on cpu_info it is necessary to include <linux/percpu.h> into <asm/msr.h>. Including <linux/percpu.h> into <asm/msr.h> is impossible because it ends up in header dependency hell. The problem is that <asm/processor.h> includes <asm/msr.h>. The inclusion of <linux/percpu.h> results in a compile fail where the compiler cannot longer handle an include in <asm/cpufeature.h> which references boot_cpu_data which is defined in <asm/processor.h>. The only reason why <asm/msr.h> is included in <asm/processor.h> are the set/get_debugctlmsr() inlines. They are defined there because <asm/processor.h> is such a nice dump ground for everything. In fact they belong obviously into <asm/debugreg.h>. Move them to <asm/debugreg.h> and fix up the resulting damage which is just exposing the reliance on random include chains. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240304005104.454678686@linutronix.de |
|
|
Thomas Gleixner
|
89b0f15f40 |
x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
Now that __num_cores_per_package and __num_threads_per_package are available, cpuinfo::x86_max_cores and the related math all over the place can be replaced with the ready to consume data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20240213210253.176147806@linutronix.de |
|
|
Thomas Gleixner
|
fab75e790f |
x86/cpu: Remove x86_coreid_bits
No more users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Wang Wendy <wendy.wang@intel.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20240212153625.455839743@linutronix.de |
|
|
Thomas Gleixner
|
c749ce393b |
x86/cpu: Use common topology code for AMD
Switch it over to the new topology evaluation mechanism and remove the random bits and pieces which are sprinkled all over the place. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Wang Wendy <wendy.wang@intel.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20240212153625.145745053@linutronix.de |
|
|
Thomas Gleixner
|
7e3ec62867 |
x86/cpu/amd: Provide a separate accessor for Node ID
AMD (ab)uses topology_die_id() to store the Node ID information and topology_max_dies_per_pkg to store the number of nodes per package. This collides with the proper processor die level enumeration which is coming on AMD with CPUID 8000_0026, unless there is a correlation between the two. There is zero documentation about that. So provide new storage and new accessors which for now still access die_id and topology_max_die_per_pkg(). Will be mopped up after AMD and HYGON are converted over. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Wang Wendy <wendy.wang@intel.com> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20240212153624.956116738@linutronix.de |
|
Ingo Molnar
|
03c11eb3b1 |
Linux 6.8-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXJK4UeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHsYH/jKmzKXDRsBCcw/Q HGUvFtpohWBOpN6efdf0nxilQisuyQrqKB9fnwvfcdE60VpqMJXFMdlFh/fonxPl JMbpk9y5uw48IJZA43NwTxUrjZ4wyWzv4ZF6YWa+5WdTAJpPLEPhhnLxcHOKklMr 5Cm/7B/M7eB2BXBfc45b1pkKN22q9OXvjaKxZ+5wYmiMxS+GC8l8jiJ/WlHX78PR eLgsa1v732f2D7YF75wVhaoYepR+QzA9wTKqhjMNCEaVc2PQhA2JRsBXEt84qEIa FZigmf7LLc4ed9YA2XjRBZhAehe3cZVJZ1lasW37IATS921La2WfKuiysICJOtyT bGjK8tk= =Pt7W -----END PGP SIGNATURE----- Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch Conflicts: arch/x86/include/asm/percpu.h arch/x86/include/asm/text-patching.h Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Uros Bizjak
|
0e3703630b |
x86/percpu: Fix "const_pcpu_hot" version generation failure
Version generation for "const_pcpu_hot" symbol failed because genksyms
doesn't know the __seg_gs keyword. Effectively revert commit
|
|
Borislav Petkov (AMD)
|
04c3024560 |
x86/barrier: Do not serialize MSR accesses on AMD
AMD does not have the requirement for a synchronization barrier when
acccessing a certain group of MSRs. Do not incur that unnecessary
penalty there.
There will be a CPUID bit which explicitly states that a MFENCE is not
needed. Once that bit is added to the APM, this will be extended with
it.
While at it, move to processor.h to avoid include hell. Untangling that
file properly is a matter for another day.
Some notes on the performance aspect of why this is relevant, courtesy
of Kishon VijayAbraham <Kishon.VijayAbraham@amd.com>:
On a AMD Zen4 system with 96 cores, a modified ipi-bench[1] on a VM
shows x2AVIC IPI rate is 3% to 4% lower than AVIC IPI rate. The
ipi-bench is modified so that the IPIs are sent between two vCPUs in the
same CCX. This also requires to pin the vCPU to a physical core to
prevent any latencies. This simulates the use case of pinning vCPUs to
the thread of a single CCX to avoid interrupt IPI latency.
In order to avoid run-to-run variance (for both x2AVIC and AVIC), the
below configurations are done:
1) Disable Power States in BIOS (to prevent the system from going to
lower power state)
2) Run the system at fixed frequency 2500MHz (to prevent the system
from increasing the frequency when the load is more)
With the above configuration:
*) Performance measured using ipi-bench for AVIC:
Average Latency: 1124.98ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.6759M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1172.42ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 40.9432M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
From above, x2AVIC latency is ~4% more than AVIC. However, the expectation is
x2AVIC performance to be better or equivalent to AVIC. Upon analyzing
the perf captures, it is observed significant time is spent in
weak_wrmsr_fence() invoked by x2apic_send_IPI().
With the fix to skip weak_wrmsr_fence()
*) Performance measured using ipi-bench for x2AVIC:
Average Latency: 1117.44ns [Time to send IPI from one vCPU to another vCPU]
Cumulative throughput: 42.9608M/s [Total number of IPIs sent in a second from
48 vCPUs simultaneously]
Comparing the performance of x2AVIC with and without the fix, it can be seen
the performance improves by ~4%.
Performance captured using an unmodified ipi-bench using the 'mesh-ipi' option
with and without weak_wrmsr_fence() on a Zen4 system also showed significant
performance improvement without weak_wrmsr_fence(). The 'mesh-ipi' option ignores
CCX or CCD and just picks random vCPU.
Average throughput (10 iterations) with weak_wrmsr_fence(),
Cumulative throughput: 4933374 IPI/s
Average throughput (10 iterations) without weak_wrmsr_fence(),
Cumulative throughput:
|
|
|
Linus Torvalds
|
eb55307e67 |
X86 core code updates:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have a
model ID less than 4. The newer models have the topology CPUID leaf 0xB
correctly implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By chance
a XEN/PV boot ends up with smp_num_siblings == 2, which makes the
hotplug control stay at its default value "enabled". So the mask is
never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core to
deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or even
non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned long
or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die
IDs. That's really not the right place simply because cpuinfo is
subject to be reinitialized when a CPU goes through an offline/online
cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmU+yX0THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoROUD/4vlvKEcpm9rbI5DzLcaq4DFHKbyEZF
cQtzuOSM/9vTc9DHnuoNNLl9TWSYxiVYnejf3E21evfsqspYlzbTH8bId9XBCUid
6B68AJW842M2erNuwj0b0HwF1z++zpDmBDyhGOty/KQhoM8pYOHMvntAmbzJbuso
Dgx6BLVFcboTy6RwlfRa0EE8f9W5V+JbmG/VBDpdyCInal7VrudoVFZmWQnPIft7
zwOJpAoehkp8OKq7geKDf79yWxu9a1sNPd62HtaVEvfHwehHqE6OaMLss1us+0vT
SJ/D6gmRQBOwcXaZL0wL1dG7Km9Et4AisOvzhXGvTa5b2D5oljVoqJ7V7FTf5g3u
y3aqWbeUJzERUbeJt1HoGVAKyA4GtZOvg+TNIysf6F1Z4khl9alfa9jiqjj4g1au
zgItq/ZMBEBmJ7X4FxQUEUVBG2CDsEidyNBDRcimWQUDfBakV/iCs0suD8uu8ZOD
K5jMx8Hi2+xFx7r1YqsfsyMBYOf/zUZw65RbNe+kI992JbJ9nhcODbnbo5MlAsyv
vcqlK5FwXgZ4YAC8dZHU/tyTiqAW7oaOSkqKwTP5gcyNEqsjQHV//q6v+uqtjfYn
1C4oUsRHT2vJiV9ktNJTA4GQHIYF4geGgpG8Ih2SjXsSzdGtUd3DtX1iq0YiLEOk
eHhYsnniqsYB5g==
=xrz8
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
|
|
|
Linus Torvalds
|
f0d25b5d0f |
x86 MM handling code changes for v6.7:
- Add new NX-stack self-test - Improve NUMA partial-CFMWS handling - Fix #VC handler bugs resulting in SEV-SNP boot failures - Drop the 4MB memory size restriction on minimal NUMA nodes - Reorganize headers a bit, in preparation to header dependency reduction efforts - Misc cleanups & fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmU9Ek4RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gIJQ/+Mg6mzMaThyNXqhJszeZJBmDaBv2sqjAB 5tcferg1nJBdNBzX8bJ95UFt9fIqeYAcgH00qlQCYSmyzbC1TQTk9U2Pre1zbOw4 042ONK8sygKSje1zdYleHoBeqwnxD2VNM0NwBElhGjumwHRng/tbLiI9wx6qiz+C VsFXavkBszHGA1pjy9wZLGixYIH5jCygMpH134Wp+CIhpS+C4nftcGdIL1D5Oil1 6Tm2XeI6uyfiQhm9IOwDjfoYeC7gUjx1rp8rHseGUMJxyO/BX9q5j1ixbsVriqfW 97ucYuRL9mza7ic516C9v7OlAA3AGH2xWV+SYOGK88i9Co4kYzP4WnamxXqOsD8+ popxG55oa6QelhaouTBZvgERpZ4fWupSDs/UccsDaE9leMCerNEbGHEzt/Mm/2sw xopjMQ0y5Kn6/fS0dLv8U+XHu4ANkvXJkFd6Ny0h/WfgGefuQOOTG9ruYgfeqqB8 dViQ4R7CO8ySjD45KawAZl/EqL86x1M/CI1nlt0YY4vNwUuOJbebL7Jn8w3Fjxm5 FVfUlDmcPdhZfL9Vnrsi6MIou1cU1yJPw4D6sXJ4sg4s7A4ebBcRRrjayVQ4msjv Q7cvBOMnWEHhOV11pvP50FmQuj74XW3bUqiuWrnK1SypvnhHavF6kc1XYpBLs1xZ y8nueJW2qPw= =tT5F -----END PGP SIGNATURE----- Merge tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm handling updates from Ingo Molnar: - Add new NX-stack self-test - Improve NUMA partial-CFMWS handling - Fix #VC handler bugs resulting in SEV-SNP boot failures - Drop the 4MB memory size restriction on minimal NUMA nodes - Reorganize headers a bit, in preparation to header dependency reduction efforts - Misc cleanups & fixes * tag 'x86-mm-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Drop the 4 MB restriction on minimal NUMA node memory size selftests/x86/lam: Zero out buffer for readlink() x86/sev: Drop unneeded #include x86/sev: Move sev_setup_arch() to mem_encrypt.c x86/tdx: Replace deprecated strncpy() with strtomem_pad() selftests/x86/mm: Add new test that userspace stack is in fact NX x86/sev: Make boot_ghcb_page[] static x86/boot: Move x86_cache_alignment initialization to correct spot x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach x86/sev-es: Allow copy_from_kernel_nofault() in earlier boot x86_64: Show CR4.PSE on auxiliaries like on BSP x86/iommu/docs: Update AMD IOMMU specification document URL x86/sev/docs: Update document URL in amd-memory-encryption.rst x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h> ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window x86/numa: Introduce numa_fill_memblks() |
|
|
Uros Bizjak
|
0548eb067e |
x86/percpu: Return correct variable from current_top_of_stack()
current_top_of_stack() should return variable from _seg_gs
qualified named address space when CONFIG_USE_X86_SEG_SUPPORT=y
is enbled.
Fixes:
|
|
|
Uros Bizjak
|
ed2f752e0e |
x86/percpu: Introduce const-qualified const_pcpu_hot to micro-optimize code generation
Some variables in pcpu_hot, currently current_task and top_of_stack
are actually per-thread variables implemented as per-CPU variables
and thus stable for the duration of the respective task. There is
already an attempt to eliminate redundant reads from these variables
using this_cpu_read_stable() asm macro, which hides the dependency
on the read memory address. However, the compiler has limited ability
to eliminate asm common subexpressions, so this approach results in a
limited success.
The solution is to allow more aggressive elimination by aliasing
pcpu_hot into a const-qualified const_pcpu_hot, and to read stable
per-CPU variables from this constant copy.
The current per-CPU infrastructure does not support reads from
const-qualified variables. However, when the compiler supports segment
qualifiers, it is possible to declare the const-aliased variable in
the relevant named address space. The compiler considers access to the
variable, declared in this way, as a read from a constant location,
and will optimize reads from the variable accordingly.
By implementing constant-qualified const_pcpu_hot, the compiler can
eliminate redundant reads from the constant variables, reducing the
number of loads from current_task from 3766 to 3217 on a test build,
a -14.6% reduction.
The reduction of loads translates to the following code savings:
text data bss dec hex filename
25,477,353 4389456 808452 30675261 1d4113d vmlinux-old.o
25,476,074 4389440 808452 30673966 1d40c2e vmlinux-new.o
representing a code size reduction of -1279 bytes.
[ mingo: Updated the changelog, EXPORT(const_pcpu_hot). ]
Co-developed-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231020162004.135244-1-ubizjak@gmail.com
|
|
|
Thomas Gleixner
|
4705243d23 |
x86/apic: Use u32 for APIC IDs in global data
APIC IDs are used with random data types u16, u32, int, unsigned int, unsigned long. Make it all consistently use u32 because that reflects the hardware register width and fixup the most obvious usage sites of that. The APIC callbacks will be addressed separately. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.922905727@linutronix.de |
|
|
Thomas Gleixner
|
6e29032340 |
x86/cpu: Move cpu_l[l2]c_id into topology info
The topology IDs which identify the LLC and L2 domains clearly belong to the per CPU topology information. Move them into cpuinfo_x86::cpuinfo_topo and get rid of the extra per CPU data and the related exports. This also paves the way to do proper topology evaluation during early boot because it removes the only per CPU dependency for that. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.803864641@linutronix.de |
|
|
Thomas Gleixner
|
22dc963162 |
x86/cpu: Move logical package and die IDs into topology info
Yet another topology related data pair. Rename logical_proc_id to logical_pkg_id so it fits the common naming conventions. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.745139505@linutronix.de |
|
|
Thomas Gleixner
|
e3c0c5d52a |
x86/cpu: Move cu_id into topology info
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.628405546@linutronix.de |
|
|
Thomas Gleixner
|
e95256335d |
x86/cpu: Move cpu_core_id into topology info
Rename it to core_id and stick it to the other ID fields. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.566519388@linutronix.de |
|
|
Thomas Gleixner
|
8a169ed40f |
x86/cpu: Move cpu_die_id into topology info
Move the next member. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.388185134@linutronix.de |
|
|
Thomas Gleixner
|
02fb601d27 |
x86/cpu: Move phys_proc_id into topology info
Rename it to pkg_id which is the terminology used in the kernel. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.329006989@linutronix.de |
|
|
Thomas Gleixner
|
b9655e702d |
x86/cpu: Encapsulate topology information in cpuinfo_x86
The topology related information is randomly scattered across cpuinfo_x86. Create a new structure cpuinfo_topo and move in a first step initial_apicid and apicid into it. Aside of being better readable this is in preparation for replacing the horribly fragile CPU topology evaluation code further down the road. Consolidate APIC ID fields to u32 as that represents the hardware type. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230814085112.269787744@linutronix.de |
|
|
Ingo Molnar
|
3fc18b06b8 |
Linux 6.6-rc4
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmUZ4WEeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnIYH/07zef2U1nlqI+ro HRL2GlWGIs9yE70Oax+A3eYUYsjJIPu0yiDhFHUgOV3VyAALo44ZX/WNwKCGsI3e zhuOeItyyVcLGZXVC/jxSu0uveyfEiEYIWRYGyQ6Sna8Ksdk/qwhNgQNotdWdQG5 7xt8z32couglu0uOkxcGqjTxmbjO6WSM5qi7Ts+xLsgrcS5cRuNhAg/vezp9bfeL 1IUieCih4RJFgar/6LPOiB8uoVXEBonVbtlTRRqYdnqcsSIC+ACR9ZFk/+X88b5z S+Ta5VTcOAPu+2M/lSGe+PlUECvoBNK0SIYnaVCP2paPmDxfDXOFvSy/qJE87/7L 9BeonFw= =8FTr -----END PGP SIGNATURE----- Merge tag 'v6.6-rc4' into x86/entry, to pick up fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
d73a105586 |
x86/mm: Move arch_memory_failure() and arch_is_platform_page() definitions from <asm/processor.h> to <asm/pgtable.h>
<linux/mm.h> relies on these definitions being included first, which is true currently due to historic header spaghetti, but in the future <asm/processor.h> will not guaranteed to be included by the MM code. Move these definitions over into a suitable MM header. This is a preparatory patch for x86 header dependency simplifications and reductions. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org |
|
Josh Poimboeuf
|
91857ae203 |
x86/srso: Set CPUID feature bits independently of bug or mitigation status
Booting with mitigations=off incorrectly prevents the
X86_FEATURE_{IBPB_BRTYPE,SBPB} CPUID bits from getting set.
Also, future CPUs without X86_BUG_SRSO might still have IBPB with branch
type prediction flushing, in which case SBPB should be used instead of
IBPB. The current code doesn't allow for that.
Also, cpu_has_ibpb_brtype_microcode() has some surprising side effects
and the setting of these feature bits really doesn't belong in the
mitigation code anyway. Move it to earlier.
Fixes:
|
|
Nikolay Borisov
|
f71e1d2ff8 |
x86/entry: Rename ignore_sysret()
The SYSCALL instruction cannot really be disabled in compatibility mode. The best that can be done is to configure the CSTAR msr to point to a minimal handler. Currently this handler has a rather misleading name - ignore_sysret() as it's not really doing anything with sysret. Give it a more descriptive name. Signed-off-by: Nikolay Borisov <nik.borisov@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230623111409.3047467-3-nik.borisov@suse.com |
|
|
Linus Torvalds
|
df57721f9a |
Add x86 shadow stack support
Convert IBT selftest to asm to fix objtool warning -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTv1QQACgkQaDWVMHDJ krAUwhAAn6TOwHJK8BSkHeiQhON1nrlP3c5cv0AyZ2NP8RYDrZrSZvhpYBJ6wgKC Cx5CGq5nn9twYsYS3KsktLKDfR3lRdsQ7K9qtyFtYiaeaVKo+7gEKl/K+klwai8/ gninQWHk0zmSCja8Vi77q52WOMkQKapT8+vaON9EVDO8dVEi+CvhAIfPwMafuiwO Rk4X86SzoZu9FP79LcCg9XyGC/XbM2OG9eNUTSCKT40qTTKm5y4gix687NvAlaHR ko5MTsdl0Wfp6Qk0ohT74LnoA2c1g/FluvZIM33ci/2rFpkf9Hw7ip3lUXqn6CPx rKiZ+pVRc0xikVWkraMfIGMJfUd2rhelp8OyoozD7DB7UZw40Q4RW4N5tgq9Fhe9 MQs3p1v9N8xHdRKl365UcOczUxNAmv4u0nV5gY/4FMC6VjldCl2V9fmqYXyzFS4/ Ogg4FSd7c2JyGFKPs+5uXyi+RY2qOX4+nzHOoKD7SY616IYqtgKoz5usxETLwZ6s VtJOmJL0h//z0A7tBliB0zd+SQ5UQQBDC2XouQH2fNX2isJMn0UDmWJGjaHgK6Hh 8jVp6LNqf+CEQS387UxckOyj7fu438hDky1Ggaw4YqowEOhQeqLVO4++x+HITrbp AupXfbJw9h9cMN63Yc0gVxXQ9IMZ+M7UxLtZ3Cd8/PVztNy/clA= =3UUm -----END PGP SIGNATURE----- Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 shadow stack support from Dave Hansen: "This is the long awaited x86 shadow stack support, part of Intel's Control-flow Enforcement Technology (CET). CET consists of two related security features: shadow stacks and indirect branch tracking. This series implements just the shadow stack part of this feature, and just for userspace. The main use case for shadow stack is providing protection against return oriented programming attacks. It works by maintaining a secondary (shadow) stack using a special memory type that has protections against modification. When executing a CALL instruction, the processor pushes the return address to both the normal stack and to the special permission shadow stack. Upon RET, the processor pops the shadow stack copy and compares it to the normal stack copy. For more information, refer to the links below for the earlier versions of this patch set" Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/ Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/ * tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits) x86/shstk: Change order of __user in type x86/ibt: Convert IBT selftest to asm x86/shstk: Don't retry vm_munmap() on -EINTR x86/kbuild: Fix Documentation/ reference x86/shstk: Move arch detail comment out of core mm x86/shstk: Add ARCH_SHSTK_STATUS x86/shstk: Add ARCH_SHSTK_UNLOCK x86: Add PTRACE interface for shadow stack selftests/x86: Add shadow stack test x86/cpufeatures: Enable CET CR4 bit for shadow stack x86/shstk: Wire in shadow stack interface x86: Expose thread features in /proc/$PID/status x86/shstk: Support WRSS for userspace x86/shstk: Introduce map_shadow_stack syscall x86/shstk: Check that signal frame is shadow stack mem x86/shstk: Check that SSP is aligned on sigreturn x86/shstk: Handle signals for shadow stack x86/shstk: Introduce routines modifying shstk x86/shstk: Handle thread shadow stack x86/shstk: Add user-mode shadow stack support ... |
|
|
Linus Torvalds
|
1687d8aca5 |
* Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
* Use static_calls() instead of indirect calls for apic->foo()
* Tons of cleanups an crap removal along the way
-----BEGIN PGP SIGNATURE-----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=eoKm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
|
|
|
Linus Torvalds
|
97efd28334 |
Misc x86 cleanups.
The following commit deserves special mention:
|
|
Mateusz Guzik
|
c8afaa1b0f |
locking: remove spin_lock_prefetch
The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.
Since then the line got only touched up to keep compiling.
While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock(). It adds spurious traffic, for short.
On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.
As such, remove it.
I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.
Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Arnd Bergmann
|
eb3515dc99 |
x86: Move gds_ucode_mitigated() declaration to header
The declaration got placed in the .c file of the caller, but that
causes a warning for the definition:
arch/x86/kernel/cpu/bugs.c:682:6: error: no previous prototype for 'gds_ucode_mitigated' [-Werror=missing-prototypes]
Move it to a header where both sides can observe it instead.
Fixes:
|
|
|
Thomas Gleixner
|
3ba3fdfe2c |
x86/cpu: Make identify_boot_cpu() static
It's not longer used outside the source file. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest) |
|
|
Borislav Petkov (AMD)
|
77245f1c3c |
x86/CPU/AMD: Do not leak quotient data after a division by 0
Under certain circumstances, an integer division by 0 which faults, can leave stale quotient data from a previous division operation on Zen1 microarchitectures. Do a dummy division 0/1 before returning from the #DE exception handler in order to avoid any leaks of potentially sensitive data. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Rick Edgecombe
|
2d39a6add4 |
x86/shstk: Add user-mode shadow stack support
Introduce basic shadow stack enabling/disabling/allocation routines. A task's shadow stack is allocated from memory with VM_SHADOW_STACK flag and has a fixed size of min(RLIMIT_STACK, 4GB). Keep the task's shadow stack address and size in thread_struct. This will be copied when cloning new threads, but needs to be cleared during exec, so add a function to do this. 32 bit shadow stack is not expected to have many users and it will complicate the signal implementation. So do not support IA32 emulation or x32. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-29-rick.p.edgecombe%40intel.com |
|
|
Rick Edgecombe
|
98cfa46309 |
x86: Introduce userspace API for shadow stack
Add three new arch_prctl() handles: - ARCH_SHSTK_ENABLE/DISABLE enables or disables the specified feature. Returns 0 on success or a negative value on error. - ARCH_SHSTK_LOCK prevents future disabling or enabling of the specified feature. Returns 0 on success or a negative value on error. The features are handled per-thread and inherited over fork(2)/clone(2), but reset on exec(). Co-developed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-27-rick.p.edgecombe%40intel.com |
|
|
Arnd Bergmann
|
566ffa3ae9 |
x86/cpu: Fix amd_check_microcode() declaration
The newly added amd_check_microcode() function has two conflicting definitions
if CONFIG_CPU_SUP_AMD is enabled and CONFIG_MICROCODE_AMD is disabled. Since
the header with the stub definition is not included in cpu/amd.c, this only
causes a -Wmissing-prototype warning with W=1:
arch/x86/kernel/cpu/amd.c:1289:6: error: no previous prototype for 'amd_check_microcode' [-Werror=missing-prototypes]
Adding the missing #include shows the other problem:
arch/x86/kernel/cpu/amd.c:1290:6: error: redefinition of 'amd_check_microcode'
arch/x86/include/asm/microcode_amd.h:58:20: note: previous definition of 'amd_check_microcode' with type 'void(void)'
Move the declaration into a more appropriate header that is already
included, with the #ifdef check changed to match the definition's.
Fixes:
|
|
|
Borislav Petkov (AMD)
|
fb3bd914b3 |
x86/srso: Add a Speculative RAS Overflow mitigation
Add a mitigation for the speculative return address stack overflow vulnerability found on AMD processors. The mitigation works by ensuring all RET instructions speculate to a controlled location, similar to how speculation is controlled in the retpoline sequence. To accomplish this, the __x86_return_thunk forces the CPU to mispredict every function return using a 'safe return' sequence. To ensure the safety of this mitigation, the kernel must ensure that the safe return sequence is itself free from attacker interference. In Zen3 and Zen4, this is accomplished by creating a BTB alias between the untraining function srso_untrain_ret_alias() and the safe return function srso_safe_ret_alias() which results in evicting a potentially poisoned BTB entry and using that safe one for all function returns. In older Zen1 and Zen2, this is accomplished using a reinterpretation technique similar to Retbleed one: srso_untrain_ret() and srso_safe_ret(). Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> |
|
|
Thomas Gleixner
|
e94cd1503b |
x86/smpboot: Get rid of cpu_init_secondary()
The synchronization of the AP with the control CPU is a SMP boot problem and has nothing to do with cpu_init(). Open code cpu_init_secondary() in start_secondary() and move wait_for_master_cpu() into the SMP boot code. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Helge Deller <deller@gmx.de> # parisc Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Link: https://lore.kernel.org/r/20230512205255.981999763@linutronix.de |