The driver checks the firmware version during initialization.If preemption
is supported, the driver configures preemption accordingly and handles
userspace preemption requests. Otherwise, the driver returns an error for
userspace preemption requests.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104185340.897560-1-lizhi.hou@amd.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of telemetry data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-3-lizhi.hou@amd.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of resource data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-2-lizhi.hou@amd.com
To collect firmware debug information, the userspace application allocates
a AMDXDNA_BO_DEV buffer object through DRM_IOCTL_AMDXDNA_CREATE_BO.
Then it associates the buffer with the hardware context through
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX which requests firmware to bind the buffer
through a mailbox command. The firmware then writes the debug data into
this buffer. The buffer can be mapped into userspace so that
applications can retrieve and analyze the firmware debug information.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20251016203016.819441-1-lizhi.hou@amd.com
Add new parameter DRM_AMDXDNA_HW_LAST_ASYNC_ERR to get array IOCTL. When
hardware reports an error, the driver save the error information and
timestamp. This new get array parameter retrieves the last error.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20251014234119.628453-1-lizhi.hou@amd.com
Currently, pm_runtime_resume_and_get() is invoked in the driver's open
callback, and pm_runtime_put_autosuspend() is called in the close
callback. As a result, the device remains active whenever an application
opens it, even if no I/O is performed, leading to unnecessary power
consumption.
Move the runtime PM calls to the AIE2 callbacks that actually interact
with the hardware. The device will automatically suspend after 5 seconds
of inactivity (no hardware accesses and no pending commands), and it will
be resumed on the next hardware access.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250923152229.1303625-1-lizhi.hou@amd.com
Add interface for applications to get information array. The application
provides a buffer pointer along with information type, maximum number of
entries and maximum size of each entry. The buffer may also contain match
conditions based on the information type. After the ioctl completes, the
actual number of entries and entry size are returned. (see [1], used by
driver runtime library)
[1] https://github.com/amd/xdna-driver/blob/main/src/shim/host/platform_host.cpp#L337
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250903053402.2103196-1-lizhi.hou@amd.com
Walking hardware contexts created by a process is duplicated in multiple
spots. Add a function, amdxdna_hwctx_walk(), and replace all spots.
hwctx_srcu and dev_lock are good enough to protect hardware context list.
Remove hwctx_lock.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250815171634.3417487-1-lizhi.hou@amd.com
The suspend and resume callbacks for pm and runtime pm should be same.
During suspending, it needs to stop all hardware contexts first. And
the hardware contexts will be restarted after the device is resumed.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250803191450.1568851-1-lizhi.hou@amd.com
Add amdxdna_gem_prime_export() and amdxdna_gem_prime_import() for BO
import and export. Register mmu notifier for imported BO as well. When
MMU_NOTIFIER_UNMAP event is received, queue work to remove the notifier.
The same BO could be mapped multiple times if it is exported and imported
by an application. Use a link list to track VMAs the BO been mapped.
v2: Rebased and call get_dma_buf() before dma_buf_attach()
v3: Removed import_attach usage
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250325200105.2744079-1-lizhi.hou@amd.com
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
Add SET_STATE ioctl to configure device power mode for aie2 device.
Three modes are supported initially.
POWER_MODE_DEFAULT: Enable clock gating and set DPM (Dynamic Power
Management) level to value which has been set by resource solver or
maximum DPM level the device supports.
POWER_MODE_HIGH: Enable clock gating and set DPM level to maximum DPM
level the device supports.
POWER_MODE_TURBO: Disable clock gating and set DPM level to maximum DPM
level the device supports.
Disabling clock gating means all clocks always run on full speed. And
the different clock frequency are used based on DPM level been set.
Initially, the driver set the power mode to default mode.
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-4-lizhi.hou@amd.com
Switch mailbox message id and hardware context id management over from
the idr api to the xarray api.
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-3-lizhi.hou@amd.com
The old SET_SYSTEM_SLEEP_PM_OPS and SET_RUNTIME_PM_OPS macros cause a build
warning when CONFIG_PM is disabled:
drivers/accel/amdxdna/amdxdna_pci_drv.c:343:12: error: 'amdxdna_pmops_resume' defined but not used [-Werror=unused-function]
343 | static int amdxdna_pmops_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~
drivers/accel/amdxdna/amdxdna_pci_drv.c:328:12: error: 'amdxdna_pmops_suspend' defined but not used [-Werror=unused-function]
328 | static int amdxdna_pmops_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
Change these to the modern replacements.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Tested-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213090259.68492-1-arnd@kernel.org
Add GET_INFO ioctl to retrieve hardware information, including
AIE, clock, hardware context etc.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-11-lizhi.hou@amd.com
Add interfaces for user application to submit command and wait for its
completion.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-8-lizhi.hou@amd.com
There different types of BOs are supported:
- shmem
A user application uses shmem BOs as input/output for its workload running
on NPU.
- device memory heap
The fixed size buffer dedicated to the device.
- device buffer
The buffer object allocated from device memory heap.
- command buffer
The buffer object created for delivering commands. The command buffer
object is small and pinned on creation.
New IOCTLs are added: CREATE_BO, GET_BO_INFO, SYNC_BO. SYNC_BO is used
to explicitly flush CPU cache for BO memory.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-7-lizhi.hou@amd.com
The hardware can be shared among multiple user applications. The
hardware resources are allocated/freed based on the request from
user application via driver IOCTLs.
DRM_IOCTL_AMDXDNA_CREATE_HWCTX
Allocate tile columns and create a hardware context structure to track the
usage and status of the resources. A hardware context ID is returned for
XDNA command execution.
DRM_IOCTL_AMDXDNA_DESTROY_HWCTX
Release hardware context based on its ID. The tile columns belong to
this hardware context will be reclaimed.
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX
Config hardware context. Bind the hardware context to the required
resources.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-6-lizhi.hou@amd.com
AMD AI Engine forms the core of AMD NPU and can be used for accelerating
machine learning applications.
Add the driver to support AI Engine integrated to AMD CPU.
Only very basic functionalities are added.
- module and PCI device initialization
- firmware load
- power up
- low level hardware initialization
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-3-lizhi.hou@amd.com
Lizhi Hou
Mario Limonciello
Arnd Bergmann