mirror of https://github.com/torvalds/linux.git
110 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
c43267e679 |
arm64 updates for 7.1:
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for better
control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can use
resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions
-----BEGIN PGP SIGNATURE-----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=CnVn
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
|
|
Mark Rutland
|
c5538d0141 |
entry: Split kernel mode logic from irqentry_{enter,exit}()
The generic irqentry code has entry/exit functions specifically for exceptions taken from user mode, but doesn't have entry/exit functions specifically for exceptions taken from kernel mode. It would be helpful to have separate entry/exit functions specifically for exceptions taken from kernel mode. This would make the structure of the entry code more consistent, and would make it easier for architectures to manage logic specific to exceptions taken from kernel mode. Move the logic specific to kernel mode out of irqentry_enter() and irqentry_exit() into new irqentry_enter_from_kernel_mode() and irqentry_exit_to_kernel_mode() functions. These are marked __always_inline and placed in irq-entry-common.h, as with irqentry_enter_from_user_mode() and irqentry_exit_to_user_mode(), so that they can be inlined into architecture-specific wrappers. The existing out-of-line irqentry_enter() and irqentry_exit() functions retained as callers of the new functions. The lockdep assertion from irqentry_exit() is moved into irqentry_exit_to_user_mode() and irqentry_exit_to_kernel_mode(). This was previously missing from irqentry_exit_to_user_mode() when called directly, and any new lockdep assertion failure relating from this change is a latent bug. Aside from the lockdep change noted above, there should be no functional change as a result of this change. [ tglx: Updated kernel doc ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260407131650.3813777-5-mark.rutland@arm.com |
|
|
Mark Rutland
|
22f66e7ef4 |
entry: Remove local_irq_{enable,disable}_exit_to_user()
local_irq_enable_exit_to_user() and local_irq_disable_exit_to_user() are
never overridden by architecture code, and are always equivalent to
local_irq_enable() and local_irq_disable().
These functions were added on the assumption that arm64 would override
them to manage 'DAIF' exception masking, as described by Thomas Gleixner
in these threads:
https://lore.kernel.org/all/20190919150809.340471236@linutronix.de/
https://lore.kernel.org/all/alpine.DEB.2.21.1910240119090.1852@nanos.tec.linutronix.de/
In practice arm64 did not need to override either. Prior to moving to
the generic irqentry code, arm64's management of DAIF was reworked in
commit:
|
|
Peter Zijlstra
|
0e98eb1481 |
entry: Prepare for deferred hrtimer rearming
The hrtimer interrupt expires timers and at the end of the interrupt it rearms the clockevent device for the next expiring timer. That's obviously correct, but in the case that a expired timer sets NEED_RESCHED the return from interrupt ends up in schedule(). If HRTICK is enabled then schedule() will modify the hrtick timer, which causes another reprogramming of the hardware. That can be avoided by deferring the rearming to the return from interrupt path and if the return results in a immediate schedule() invocation then it can be deferred until the end of schedule(), which avoids multiple rearms and re-evaluation of the timer wheel. As this is only relevant for interrupt to user return split the work masks up and hand them in as arguments from the relevant exit to user functions, which allows the compiler to optimize the deferred handling out for the syscall exit to user case. Add the rearm checks to the approritate places in the exit to user loop and the interrupt return to kernel path, so that the rearming is always guaranteed. In the return to user space path this is handled in the same way as TIF_RSEQ to avoid extra instructions in the fast path, which are truly hurtful for device interrupt heavy work loads as the extra instructions and conditionals while benign at first sight accumulate quickly into measurable regressions. The return from syscall path is completely unaffected due to the above mentioned split so syscall heavy workloads wont have any extra burden. For now this is just placing empty stubs at the right places which are all optimized out by the compiler until the actual functionality is in place. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260224163431.066469985@kernel.org |
|
Thomas Gleixner
|
5c4378b7b0 |
Merge branch 'core/entry' into sched/core
Pull the entry update to avoid merge conflicts with the time slice extension changes. Signed-off-by: Thomas Gleixner <tglx@kernel.org> |
|
Jinjie Ruan
|
31c9387d0d |
entry: Inline syscall_exit_work() and syscall_trace_enter()
After switching ARM64 to the generic entry code, a syscall_exit_work()
appeared as a profiling hotspot because it is not inlined.
Inlining both syscall_trace_enter() and syscall_exit_work() provides a
performance gain when any of the work items is enabled. With audit enabled
this results in a ~4% performance gain for perf bench basic syscall on
a kunpeng920 system:
| Metric | Baseline | Inlined | Change |
| ---------- | ----------- | ----------- | ------ |
| Total time | 2.353 [sec] | 2.264 [sec] | ↓3.8% |
| usecs/op | 0.235374 | 0.226472 | ↓3.8% |
| ops/sec | 4,248,588 | 4,415,554 | ↑3.9% |
Small gains can be observed on x86 as well, though the generated code
optimizes for the work case, which is counterproductive for high
performance scenarios where such entry/exit work is usually avoided.
Avoid this by marking the work check in syscall_enter_from_user_mode_work()
unlikely, which is what the corresponding check in the exit path does
already.
[ tglx: Massage changelog and add the unlikely() ]
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128031934.3906955-14-ruanjinjie@huawei.com
|
|
|
Jinjie Ruan
|
578b21fd3a |
entry: Add arch_ptrace_report_syscall_entry/exit()
ARM64 requires a architecture specific ptrace wrapper as it needs to save and restore scratch registers. Provide arch_ptrace_report_syscall_entry/exit() wrappers which fall back to ptrace_report_syscall_entry/exit() if the architecture does not provide them. No functional change intended. [ tglx: Massaged changelog and comments ] Suggested-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Link: https://patch.msgid.link/20260128031934.3906955-11-ruanjinjie@huawei.com |
|
|
Jinjie Ruan
|
03150a9f84 |
entry: Remove unused syscall argument from syscall_trace_enter()
The 'syscall' argument of syscall_trace_enter() is immediately overwritten before any real use and serves only as a local variable, so drop the parameter. No functional change intended. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260128031934.3906955-2-ruanjinjie@huawei.com |
|
Thomas Gleixner
|
3c78aaec19 |
entry: Hook up rseq time slice extension
Wire the grant decision function up in exit_to_user_mode_loop() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20251215155709.258157362@linutronix.de |
|
|
Thomas Gleixner
|
dd0a046069 |
rseq: Implement syscall entry work for time slice extensions
The kernel sets SYSCALL_WORK_RSEQ_SLICE when it grants a time slice extension. This allows to handle the rseq_slice_yield() syscall, which is used by user space to relinquish the CPU after finishing the critical section for which it requested an extension. In case the kernel state is still GRANTED, the kernel resets both kernel and user space state with a set of sanity checks. If the kernel state is already cleared, then this raced against the timer or some other interrupt and just clears the work bit. Doing it in syscall entry work allows to catch misbehaving user space, which issues an arbitrary syscall, i.e. not rseq_slice_yield(), from the critical section. Contrary to the initial strict requirement to use rseq_slice_yield() arbitrary syscalls are not considered a violation of the ABI contract anymore to allow onion architecture applications, which cannot control the code inside a critical section, to utilize this as well. If the code detects inconsistent user space that result in a SIGSEGV for the application. If the grant was still active and the task was not preempted yet, the work code reschedules immediately before continuing through the syscall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20251215155709.005777059@linutronix.de |
|
|
Thomas Gleixner
|
32034df66b |
rseq: Switch to TIF_RSEQ if supported
TIF_NOTIFY_RESUME is a multiplexing TIF bit, which is suboptimal especially with the RSEQ fast path depending on it, but not really handling it. Define a separate TIF_RSEQ in the generic TIF space and enable the full separation of fast and slow path for architectures which utilize that. That avoids the hassle with invocations of resume_user_mode_work() from hypervisors, which clear TIF_NOTIFY_RESUME. It makes the therefore required re-evaluation at the end of vcpu_run() a NOOP on architectures which utilize the generic TIF space and have a separate TIF_RSEQ. The hypervisor TIF handling does not include the separate TIF_RSEQ as there is no point in doing so. The guest does neither know nor care about the VMM host applications RSEQ state. That state is only relevant when the ioctl() returns to user space. The fastpath implementation still utilizes TIF_NOTIFY_RESUME for failure handling, but this only happens within exit_to_user_mode_loop(), so arguably the hypervisor ioctl() code is long done when this happens. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20251027084307.903622031@linutronix.de |
|
|
Thomas Gleixner
|
3db6b38dfe |
rseq: Switch to fast path processing on exit to user
Now that all bits and pieces are in place, hook the RSEQ handling fast path
function into exit_to_user_mode_prepare() after the TIF work bits have been
handled. If case of fast path failure, TIF_NOTIFY_RESUME has been raised
and the caller needs to take another turn through the TIF handling slow
path.
This only works for architectures which use the generic entry code.
Architectures who still have their own incomplete hacks are not supported
and won't be.
This results in the following improvements:
Kernel build Before After Reduction
exit to user 80692981 80514451
signal checks: 32581 121 99%
slowpath runs: 1201408 1.49% 198 0.00% 100%
fastpath runs: 675941 0.84% N/A
id updates: 1233989 1.53% 50541 0.06% 96%
cs checks: 1125366 1.39% 0 0.00% 100%
cs cleared: 1125366 100% 0 100%
cs fixup: 0 0% 0
RSEQ selftests Before After Reduction
exit to user: 386281778 387373750
signal checks: 35661203 0 100%
slowpath runs: 140542396 36.38% 100 0.00% 100%
fastpath runs:
|
|
|
Thomas Gleixner
|
7702a9c285 |
entry: Inline irqentry_enter/exit_from/to_user_mode()
There is no point to have this as a function which just inlines enter_from_user_mode(). The function call overhead is larger than the function itself. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20251027084306.715309918@linutronix.de |
|
|
Thomas Gleixner
|
54a5ab5624 |
entry: Remove syscall_enter_from_user_mode_prepare()
Open code the only user in the x86 syscall code and reduce the zoo of functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20251027084306.652839989@linutronix.de |
|
|
Linus Torvalds
|
2215336295 |
hyperv-next for v6.18
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp 69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61 krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ =OR26 -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Unify guest entry code for KVM and MSHV (Sean Christopherson) - Switch Hyper-V MSI domain to use msi_create_parent_irq_domain() (Nam Cao) - Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV (Mukesh Rathor) - Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov) - Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna Kumar T S M) - Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari, Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley) * tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv: Remove the spurious null directive line MAINTAINERS: Mark hyperv_fb driver Obsolete fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver Drivers: hv: Make CONFIG_HYPERV bool Drivers: hv: Add CONFIG_HYPERV_VMBUS option Drivers: hv: vmbus: Fix typos in vmbus_drv.c Drivers: hv: vmbus: Fix sysfs output format for ring buffer index Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store() x86/hyperv: Switch to msi_create_parent_irq_domain() mshv: Use common "entry virt" APIs to do work in root before running guest entry: Rename "kvm" entry code assets to "virt" to genericize APIs entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper mshv: Handle NEED_RESCHED_LAZY before transferring to guest x86/hyperv: Add kexec/kdump support on Azure CVMs Drivers: hv: Simplify data structures for VMBus channel close message Drivers: hv: util: Cosmetic changes for hv_utils_transport.c mshv: Add support for a new parent partition configuration clocksource: hyper-v: Skip unnecessary checks for the root partition hyperv: Add missing field to hv_output_map_device_interrupt |
|
Sean Christopherson
|
9be7e1e320 |
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
Rename the "kvm" entry code files and Kconfigs to use generic "virt" nomenclature so that the code can be reused by other hypervisors (or rather, their root/dom0 partition drivers), without incorrectly suggesting the code somehow relies on and/or involves KVM. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
|
|
Sean Christopherson
|
6d0386ea99 |
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
Move KVM's morphing of pending signals into userspace exits into KVM proper, and drop the @vcpu param from xfer_to_guest_mode_handle_work(). How KVM responds to -EINTR is a detail that really belongs in KVM itself, and invoking kvm_handle_signal_exit() from kernel code creates an inverted module dependency. E.g. attempting to move kvm_handle_signal_exit() into kvm_main.c would generate an linker error when building kvm.ko as a module. Dropping KVM details will also converting the KVM "entry" code into a more generic virtualization framework so that it can be used when running as a Hyper-V root partition. Lastly, eliminating usage of "struct kvm_vcpu" outside of KVM is also nice to have for KVM x86 developers, as keeping the details of kvm_vcpu purely within KVM allows changing the layout of the structure without having to boot into a new kernel, e.g. allows rebuilding and reloading kvm.ko with a modified kvm_vcpu structure as part of debug/development. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Wei Liu <wei.liu@kernel.org> |
|
|
Jinjie Ruan
|
3c973c51bf |
entry: Add arch_irqentry_exit_need_resched() for arm64
Compared to the generic entry code, ARM64 does additional checks when deciding to reschedule on return from interrupt. So introduce arch_irqentry_exit_need_resched() in the need_resched() condition of the generic raw_irqentry_exit_cond_resched(), with a NOP default. This will allow ARM64 to implement the architecture specific version for switching over to the generic entry code. Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org> |
|
|
Linus Torvalds
|
63eb28bb14 |
ARM:
- Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes. LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups. RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo. - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone. - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list). - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC. - Various cleanups and fixes. x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still). - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care. - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance. - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data. Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions. - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL. - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely. - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation. Selftests: - Fix a comment typo. - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing). - Skip tests that hit EACCES when attempting to access a file, and rpint a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU 9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw== =j2At -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor - Convert more system register sanitization to the config-driven implementation - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls - Various cleanups and minor fixes LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n) - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list) - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC - Various cleanups and fixes x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still) - Fix a variety of flaws and bugs in the AVIC device posted IRQ code - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs - Clean up and document/comment the irqfd assignment code - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation Selftests: - Fix a comment typo - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing) - Skip tests that hit EACCES when attempting to access a file, and print a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits) Documentation: KVM: Use unordered list for pre-init VGIC registers RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map() RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs RISC-V: perf/kvm: Add reporting of interrupt events RISC-V: KVM: Enable ring-based dirty memory tracking RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap RISC-V: KVM: Delegate illegal instruction fault to VS mode RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs RISC-V: KVM: Factor-out g-stage page table management RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence RISC-V: KVM: Introduce struct kvm_gstage_mapping RISC-V: KVM: Factor-out MMU related declarations into separate headers RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() RISC-V: KVM: Don't flush TLB when PTE is unchanged RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list ... |
|
|
Mark Rutland
|
ee4a2e08c1 |
entry: Add arch_in_rcu_eqs()
All architectures have an interruptible RCU extended quiescent state (EQS) as part of their idle sequences, where interrupts can occur without RCU watching. Entry code must account for this and wake RCU as necessary; the common entry code deals with this in irqentry_enter() by treating any interrupt from an idle thread as potentially having occurred within an EQS and waking RCU for the duration of the interrupt via rcu_irq_enter() .. rcu_irq_exit(). Some architectures may have other interruptible EQSs which require similar treatment. For example, on s390 it is necessary to enable interrupts around guest entry in the middle of a period where core KVM code has entered an EQS. So that architectures can wake RCU in these cases, this patch adds a new arch_in_rcu_eqs() hook to the common entry code which is checked in addition to the existing is_idle_thread() check, with RCU woken if either returns true. A default implementation is provided which always returns false, which suffices for most architectures. As no architectures currently implement arch_in_rcu_eqs(), there should be no functional change as a result of this patch alone. A subsequent patch will add an s390 implementation to fix a latent bug with missing RCU wakeups. [ajd@linux.ibm.com: rebase, fix commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Link: https://lore.kernel.org/r/20250708092742.104309-2-ajd@linux.ibm.com Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-ID: <20250708092742.104309-2-ajd@linux.ibm.com> |
|
|
Thomas Gleixner
|
5173ac2dc8 |
Prerequisite for ARM[64] generic entry conversion
-----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmhizyYTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoYXaD/4+Y3E697PG/rWlVZwsOhGdxUO2SZL/ eXlCmndSqtKcRluh0HAl9Y0XL5cfZ+LslonfxFYH25LQcVBLaUkB4y1YSXuob6N1 Czh1I5cRzLXMB0MzS0tzjjRZnoFTPzXfSj+WMLy7/UqfAflMYoGSPMnFQkdnf6gV kBoLFKctAhxMZNoqzEShXXsN6MzFj6LVI/VPaXKIw9tRe8W8QM4JTikb2QPw2ZAx K+PxH4NFmMjmt9KtAeZdAdmcOWlF7nil/DHbefEjsQOStcXQO+MkdozDjtW65/TY E7Brat7wPgSmUrt8+jgJVE7f38proLkYPfRrOJccumBD+XeMVu2XUnfhWqRENzoE 7v7Xb3ce3c6ROEZGSzDP1rakWqPytoBX0+70POkiQQYIIyCyXFwMOPju3vlWMwqN tFGOw75mbdG+X2otZpoQcWZPAPRqdqwmAEl8LR4cJnRh+I2R6oo/K0KkPcM9+JJN L1YnEQk1w/wsIcnFkxWOUdYwMuJLvecli7gKaVs6J2AGzLvJVMYpWglSlhGzrufC ZMEhEKgDJYU9QhftBBqul/tmi+JRbAjIzTN1zrBPntQ2CYyLjXtsCKQsDvqxaErI uc0JYxjv3/D0sjzqrIHZfZHv04XtZ2kTnkhBiD7zGJ469LZDTDXctd8m9rgzYSDi Uho970FEvl18yQ== =IUBY -----END PGP SIGNATURE----- Merge tag 'entry-split-for-arm' into core/entry Prerequisite for ARM[64] generic entry conversion Merge it into the entry branch so further changes can be based on it. |
|
|
Jinjie Ruan
|
a70e9f647f |
entry: Split generic entry into generic exception and syscall entry
Currently CONFIG_GENERIC_ENTRY enables both the generic exception entry logic and the generic syscall entry logic, which are otherwise loosely coupled. Introduce separate config options for these so that architectures can select the two independently. This will make it easier for architectures to migrate to generic entry code. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250213130007.1418890-2-ruanjinjie@huawei.com Link: https://lore.kernel.org/all/20250624-generic-entry-split-v1-1-53d5ef4f94df@linaro.org [Linus Walleij: rebase onto v6.16-rc1] |
|
Dmitry Vyukov
|
a2fc422ed7 |
syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON
There are two possible scenarios for syscall filtering: - having a trusted/allowed range of PCs, and intercepting everything else - or the opposite: a single untrusted/intercepted range and allowing everything else (this is relevant for any kind of sandboxing scenario, or monitoring behavior of a single library) The current API only allows the former use case due to allowed range wrap-around check. Add PR_SYS_DISPATCH_INCLUSIVE_ON that enables the second use case. Add PR_SYS_DISPATCH_EXCLUSIVE_ON alias for PR_SYS_DISPATCH_ON to make it clear how it's different from the new PR_SYS_DISPATCH_INCLUSIVE_ON. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/97947cc8e205ff49675826d7b0327ef2e2c66eea.1747839857.git.dvyukov@google.com |
|
Charlie Jenkins
|
e43b8bb56e |
entry: Inline syscall_exit_to_user_mode()
Similar to commit
|
|
|
Linus Torvalds
|
5a658afd46 |
Objtool changes for v6.15:
- The biggest change is the new option to automatically fail
the build on objtool warnings: CONFIG_OBJTOOL_WERROR.
While there are no currently known unfixed false positives
left, such an expansion in the severity of objtool warnings
inevitably creates a risk of build failures, so it's disabled by
default and depends on !COMPILE_TEST, so it shouldn't be enabled
on allyesconfig/allmodconfig builds and won't be forced on people
who just accept build-time defaults in 'make oldconfig'.
While the option is strongly recommended, only people who enable
it explicitly should see it.
(Josh Poimboeuf)
- Disable branch profiling in noinstr code with a broad
brush that includes all of arch/x86/ and kernel/sched/. (Josh Poimboeuf)
- Create backup object files on objtool errors and print exact
objtool arguments to make failure analysis easier (Josh Poimboeuf)
- Improve noreturn handling (Josh Poimboeuf)
- Improve rodata handling (Tiezhu Yang)
- Support jump tables, switch tables and goto tables on LoongArch (Tiezhu Yang)
- Misc cleanups and fixes (Josh Poimboeuf, David Engraf, Ingo Molnar)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iswJ
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- The biggest change is the new option to automatically fail the build
on objtool warnings: CONFIG_OBJTOOL_WERROR.
While there are no currently known unfixed false positives left, such
an expansion in the severity of objtool warnings inevitably creates a
risk of build failures, so it's disabled by default and depends on
!COMPILE_TEST, so it shouldn't be enabled on
allyesconfig/allmodconfig builds and won't be forced on people who
just accept build-time defaults in 'make oldconfig'.
While the option is strongly recommended, only people who enable it
explicitly should see it.
(Josh Poimboeuf)
- Disable branch profiling in noinstr code with a broad brush that
includes all of arch/x86/ and kernel/sched/. (Josh Poimboeuf)
- Create backup object files on objtool errors and print exact objtool
arguments to make failure analysis easier (Josh Poimboeuf)
- Improve noreturn handling (Josh Poimboeuf)
- Improve rodata handling (Tiezhu Yang)
- Support jump tables, switch tables and goto tables on LoongArch
(Tiezhu Yang)
- Misc cleanups and fixes (Josh Poimboeuf, David Engraf, Ingo Molnar)
* tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
tracing: Disable branch profiling in noinstr code
objtool: Use O_CREAT with explicit mode mask
objtool: Add CONFIG_OBJTOOL_WERROR
objtool: Create backup on error and print args
objtool: Change "warning:" to "error:" for --Werror
objtool: Add --Werror option
objtool: Add --output option
objtool: Upgrade "Linked object detected" warning to error
objtool: Consolidate option validation
objtool: Remove --unret dependency on --rethunk
objtool: Increase per-function WARN_FUNC() rate limit
objtool: Update documentation
objtool: Improve __noreturn annotation warning
objtool: Fix error handling inconsistencies in check()
x86/traps: Make exc_double_fault() consistently noreturn
LoongArch: Enable jump table for objtool
objtool/LoongArch: Add support for goto table
objtool/LoongArch: Add support for switch table
objtool: Handle PC relative relocation type
objtool: Handle different entry size of rodata
...
|
|
Josh Poimboeuf
|
2cbb20b008 |
tracing: Disable branch profiling in noinstr code
CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update() for each use of likely() or unlikely(). That breaks noinstr rules if the affected function is annotated as noinstr. Disable branch profiling for files with noinstr functions. In addition to some individual files, this also includes the entire arch/x86 subtree, as well as the kernel/entry, drivers/cpuidle, and drivers/idle directories, all of which are noinstr-heavy. Due to the nature of how sched binaries are built by combining multiple .c files into one, branch profiling is disabled more broadly across the sched code than would otherwise be needed. This fixes many warnings like the following: vmlinux.o: warning: objtool: do_syscall_64+0x40: call to ftrace_likely_update() leaves .noinstr.text section vmlinux.o: warning: objtool: __rdgsbase_inactive+0x33: call to ftrace_likely_update() leaves .noinstr.text section vmlinux.o: warning: objtool: handle_bug.isra.0+0x198: call to ftrace_likely_update() leaves .noinstr.text section ... Reported-by: Ingo Molnar <mingo@kernel.org> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/fb94fc9303d48a5ed370498f54500cc4c338eb6d.1742586676.git.jpoimboe@kernel.org |
|
Oleg Nesterov
|
1027cd8084 |
seccomp: remove the 'sd' argument from __secure_computing()
After the previous changes 'sd' is always NULL. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20250128150313.GA15336@redhat.com Signed-off-by: Kees Cook <kees@kernel.org> |
|
|
Peter Zijlstra
|
26baa1f1c4 |
sched: Add TIF_NEED_RESCHED_LAZY infrastructure
Add the basic infrastructure to split the TIF_NEED_RESCHED bit in two. Either bit will cause a resched on return-to-user, but only TIF_NEED_RESCHED will drive IRQ preemption. No behavioural change intended. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/20241007075055.219540785@infradead.org |
|
Valentin Schneider
|
d65d411c92 |
treewide: context_tracking: Rename CONTEXT_* into CT_STATE_*
Context tracking state related symbols currently use a mix of the CONTEXT_ (e.g. CONTEXT_KERNEL) and CT_SATE_ (e.g. CT_STATE_MASK) prefixes. Clean up the naming and make the ctx_state enum use the CT_STATE_ prefix. Suggested-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Valentin Schneider <vschneid@redhat.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> |
|
André Rösti
|
fb13b11d53 |
entry: Respect changes to system call number by trace_sys_enter()
When a probe is registered at the trace_sys_enter() tracepoint, and that probe changes the system call number, the old system call still gets executed. This worked correctly until commit |
|
Sven Schnelle
|
221a164035 |
entry: Move syscall_enter_from_user_mode() to header file
To allow inlining of syscall_enter_from_user_mode(), move it to entry-common.h. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20231218074520.1998026-4-svens@linux.ibm.com |
|
|
Sven Schnelle
|
caf4062e35 |
entry: Move enter_from_user_mode() to header file
To allow inlining of enter_from_user_mode(), move it to entry-common.h. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20231218074520.1998026-3-svens@linux.ibm.com |
|
|
Sven Schnelle
|
d680194719 |
entry: Move exit to usermode functions to header file
To allow inlining, move exit_to_user_mode() to entry-common.h. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20231218074520.1998026-2-svens@linux.ibm.com |
|
|
Mark Rutland
|
1dfe3a5a7c |
entry: Remove empty addr_limit_user_check()
Back when set_fs() was a generic API for altering the address limit,
addr_limit_user_check() was a safety measure to prevent userspace being
able to issue syscalls with an unbound limit.
With the the removal of set_fs() as a generic API, the last user of
addr_limit_user_check() was removed in commit:
|
|
Gregory Price
|
3f67987cdc |
ptrace: Provide set/get interface for syscall user dispatch
The syscall user dispatch configuration can only be set by the task itself, but lacks a ptrace set/get interface which makes it impossible to implement checkpoint/restore for it. Add the required ptrace requests and the get/set functions in the syscall user dispatch code to make that possible. Signed-off-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20230407171834.3558-4-gregory.price@memverge.com |
|
|
Gregory Price
|
463b7715e7 |
syscall_user_dispatch: Untag selector address before access_ok()
To support checkpoint/restart, ptrace must be able to set the selector of the tracee. The selector is a user pointer that may be subject to memory tagging extensions on some architectures (namely ARM MTE). access_ok() clears memory tags for tagged addresses if the current task has memory tagging enabled. This obviously fails when ptrace modifies the selector of a tracee when tracer and tracee do not have the same memory tagging enabled state. Solve this by untagging the selector address before handing it to access_ok(), like other ptrace functions which modify tracee pointers do. Obviously a tracer can set an invalid selector address for the tracee, but that's independent of tagging and a general capability of the tracer. Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/all/ZCWXE04nLZ4pXEtM@arm.com/ Link: https://lore.kernel.org/r/20230407171834.3558-3-gregory.price@memverge.com |
|
|
Gregory Price
|
4336068632 |
syscall_user_dispatch: Split up set_syscall_user_dispatch()
syscall user dispatch configuration is not covered by checkpoint/restore. To prepare for ptrace access to the syscall user dispatch configuration, move the inner working of set_syscall_user_dispatch() into a helper function. Make the helper function task pointer based and let set_syscall_user_dispatch() invoke it with task=current. No functional change. Signed-off-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20230407171834.3558-2-gregory.price@memverge.com |
|
Frederic Weisbecker
|
b416514054 |
entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
RCU sometimes needs to perform a delayed wake up for specific kthreads
handling offloaded callbacks (RCU_NOCB). These wakeups are performed
by timers and upon entry to idle (also to guest and to user on nohz_full).
However the delayed wake-up on kernel exit is actually performed after
the thread flags are fetched towards the fast path check for work to
do on exit to user. As a result, and if there is no other pending work
to do upon that kernel exit, the current task will resume to userspace
with TIF_RESCHED set and the pending wake up ignored.
Fix this with fetching the thread flags _after_ the delayed RCU-nocb
kthread wake-up.
Fixes:
|
|
|
Josh Poimboeuf
|
f87d28673b |
entry: Fix noinstr warning in __enter_from_user_mode()
__enter_from_user_mode() is triggering noinstr warnings with
CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via
ct_state().
The preemption disable isn't needed as interrupts are already disabled.
And the context_tracking_enabled() check in ct_state() also isn't needed
as that's already being done by the CT_WARN_ON().
Just use __ct_state() instead.
Fixes the following warnings:
vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
Fixes:
|
|
Alexander Potapenko
|
6cae637fa2 |
entry: kmsan: introduce kmsan_unpoison_entry_regs()
struct pt_regs passed into IRQ entry code is set up by uninstrumented asm functions, therefore KMSAN may not notice the registers are initialized. kmsan_unpoison_entry_regs() unpoisons the contents of struct pt_regs, preventing potential false positives. Unlike kmsan_unpoison_memory(), it can be called under kmsan_in_runtime(), which is often the case in IRQ entry code. Link: https://lkml.kernel.org/r/20220915150417.722975-41-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
Frederic Weisbecker
|
493c182282 |
context_tracking: Take NMI eqs entrypoints over RCU
The RCU dynticks counter is going to be merged into the context tracking subsystem. Prepare with moving the NMI extended quiescent states entrypoints to context tracking. For now those are dumb redirection to existing RCU calls. Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> |
|
|
Frederic Weisbecker
|
6f0e6c1598 |
context_tracking: Take IRQ eqs entrypoints over RCU
The RCU dynticks counter is going to be merged into the context tracking subsystem. Prepare with moving the IRQ extended quiescent states entrypoints to context tracking. For now those are dumb redirection to existing RCU calls. [ paulmck: Apply Stephen Rothwell feedback from -next. ] [ paulmck: Apply Nathan Chancellor feedback. ] Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> |
|
|
Linus Torvalds
|
34f4335c16 |
* Fix syzkaller NULL pointer dereference
* Fix TDP MMU performance issue with disabling dirty logging * Fix 5.14 regression with SVM TSC scaling * Fix indefinite stall on applying live patches * Fix unstable selftest * Fix memory leak from wrong copy-and-paste * Fix missed PV TLB flush when racing with emulation -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKglysUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroOJDAgArpPcAnJbeT2VQTQcp94e4tp9k1Sf gmUewajco4zFVB/sldE0fIporETkaX+FYYPiaNDdNgJ2lUw/HUJBN7KoFEYTZ37N Xx/qXiIXQYFw1bmxTnacLzIQtD3luMCzOs/6/Q7CAFZIBpUtUEjkMlQOBuxoKeG0 B0iLCTJSw0taWcN170aN8G6T+5+bdR3AJW1k2wkgfESfYF9NfJoTUHQj9WTMzM2R aBRuXvUI/rWKvQY3DfoRmgg9Ig/SirSC+abbKIs4H08vZIEUlPk3WOZSKpsN/Wzh 3XDnVRxgnaRLx6NI/ouI2UYJCmjPKbNcueGCf5IfUcHvngHjAEG/xxe4Qw== =zQ9u -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: - syzkaller NULL pointer dereference - TDP MMU performance issue with disabling dirty logging - 5.14 regression with SVM TSC scaling - indefinite stall on applying live patches - unstable selftest - memory leak from wrong copy-and-paste - missed PV TLB flush when racing with emulation * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: do not report a vCPU as preempted outside instruction boundaries KVM: x86: do not set st->preempted when going back to user space KVM: SVM: fix tsc scaling cache logic KVM: selftests: Make hyperv_clock selftest more stable KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm() KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots() entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set KVM: Don't null dereference ops->destroy |
|
Seth Forshee
|
3e684903a8 |
entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
A livepatch transition may stall indefinitely when a kvm vCPU is heavily loaded. To the host, the vCPU task is a user thread which is spending a very long time in the ioctl(KVM_RUN) syscall. During livepatch transition, set_notify_signal() will be called on such tasks to interrupt the syscall so that the task can be transitioned. This interrupts guest execution, but when xfer_to_guest_mode_work() sees that TIF_NOTIFY_SIGNAL is set but not TIF_SIGPENDING it concludes that an exit to user mode is unnecessary, and guest execution is resumed without transitioning the task for the livepatch. This handling of TIF_NOTIFY_SIGNAL is incorrect, as set_notify_signal() is expected to break tasks out of interruptible kernel loops and cause them to return to userspace. Change xfer_to_guest_mode_work() to handle TIF_NOTIFY_SIGNAL the same as TIF_SIGPENDING, signaling to the vCPU run loop that an exit to userpsace is needed. Any pending task_work will be run when get_signal() is called from exit_to_user_mode_loop(), so there is no longer any need to run task work from xfer_to_guest_mode_work(). Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Message-Id: <20220504180840.2907296-1-sforshee@digitalocean.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Linus Torvalds
|
2319be1356 |
Locking changes in this cycle were:
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use it to
micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gaS5
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rwsem cleanups & optimizations/fixes:
- Conditionally wake waiters in reader/writer slowpaths
- Always try to wake waiters in out_nolock path
- Add try_cmpxchg64() implementation, with arch optimizations - and use
it to micro-optimize sched_clock_{local,remote}()
- Various force-inlining fixes to address objdump instrumentation-check
warnings
- Add lock contention tracepoints:
lock:contention_begin
lock:contention_end
- Misc smaller fixes & cleanups
* tag 'locking-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Use try_cmpxchg64 in sched_clock_{local,remote}
locking/atomic/x86: Introduce arch_try_cmpxchg64
locking/atomic: Add generic try_cmpxchg64 support
futex: Remove a PREEMPT_RT_FULL reference.
locking/qrwlock: Change "queue rwlock" to "queued rwlock"
lockdep: Delete local_irq_enable_in_hardirq()
locking/mutex: Make contention tracepoints more consistent wrt adaptive spinning
locking: Apply contention tracepoints in the slow path
locking: Add lock contention tracepoints
locking/rwsem: Always try to wake waiters in out_nolock path
locking/rwsem: Conditionally wake waiters in reader/writer slowpaths
locking/rwsem: No need to check for handoff bit if wait queue empty
lockdep: Fix -Wunused-parameter for _THIS_IP_
x86/mm: Force-inline __phys_addr_nodebug()
x86/kvm/svm: Force-inline GHCB accessors
task_stack, x86/cea: Force-inline stack helpers
|
|
|
Sven Schnelle
|
6d97af487d |
entry: Rename arch_check_user_regs() to arch_enter_from_user_mode()
arch_check_user_regs() is used at the moment to verify that struct pt_regs contains valid values when entering the kernel from userspace. s390 needs a place in the generic entry code to modify a cpu data structure when switching from userspace to kernel mode. As arch_check_user_regs() is exactly this, rename it to arch_enter_from_user_mode(). When entering the kernel from userspace, arch_check_user_regs() is used to verify that struct pt_regs contains valid values. Note that the NMI codepath doesn't call this function. s390 needs a place in the generic entry code to modify a cpu data structure when switching from userspace to kernel mode. As arch_check_user_regs() is exactly this, rename it to arch_enter_from_user_mode(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20220504062351.2954280-2-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
Nick Desaulniers
|
8b023accc8 |
lockdep: Fix -Wunused-parameter for _THIS_IP_
While looking into a bug related to the compiler's handling of addresses of labels, I noticed some uses of _THIS_IP_ seemed unused in lockdep. Drive by cleanup. -Wunused-parameter: kernel/locking/lockdep.c:1383:22: warning: unused parameter 'ip' kernel/locking/lockdep.c:4246:48: warning: unused parameter 'ip' kernel/locking/lockdep.c:4844:19: warning: unused parameter 'ip' Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Link: https://lore.kernel.org/r/20220314221909.2027027-1-ndesaulniers@google.com |
|
|
Sven Schnelle
|
0a70045ed8 |
entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
kernel/entry/common.c: In function ‘dynamic_irqentry_exit_cond_resched’:
kernel/entry/common.c:409:14: error: implicit declaration of function ‘static_key_unlikely’; did you mean ‘static_key_enable’? [-Werror=implicit-function-declaration]
409 | if (!static_key_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
| ^~~~~~~~~~~~~~~~~~~
| static_key_enable
static_key_unlikely() should be static_branch_unlikely().
Fixes:
|
|
|
Thomas Gleixner
|
7dd5ad2d3e |
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Revert commit
|
|
|
Linus Torvalds
|
1930a6e739 |
ptrace: Cleanups for v5.18
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|