is_mode1_reset_supported may be called before smu init, when smu_context
is unitialized in driver load/unload test. Call smu_cmn_get_smc_version
explicitly in is_mode1_reset_supported.
v2: apply to aldebaran in case is_mode1_reset_supported will be
uncommented (Candice Li)
Fixes: 710d9caec7 ("drm/amd/pm: drop most smu_cmn_get_smc_version in smu")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for getting power1_cap_min value on smu13 and smu11.
For other Asics, we still use 0 as the default value.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_check_fw_version is called in smu hw init, thus smu if version
and version are garenteed to be stored in smu context. No need to
call smu_cmn_get_smc_version again after system boot up.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep FRU related information together in a separate structure.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The allow_xgmi_power_down(true/false) will be generally replaced by:
- allow: select_xgmi_plpd_policy(XGMI_PLPD_DEFAULT)
- disallow: select_xgmi_plpd_policy(XGMI_PLPD_DISALLOW)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
split switch statement into two and consolidate the common
code for printing most of the types of clock speeds
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use variables to remove ternary expression in print statement
and improve readability. This will help to optimize the code
duplication in the switch statement
Also Changed:
replaced single_dpm_table->count as iterator in for loops
with safer clocks_num_levels value
replaced dpm_table.value usage with local var clocks_mhz
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use variables to remove the multiple nested ternary expressions
and improve readability. This will help to optimize the code
duplication in the switch statement
Also Changed:
Modify function aldebaran_get_clk_table to void function as it
always returns 0
Use const string "attempt_string" to cut down on repetition
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace print_clock_levels with emit_clock_levels for aldebaran
* replace .print_clk_levels with .emit_clk_levels in aldebaran_ppt_funcs
* added extra parameter int *offset
* removed var size, uses arg *offset instead
* removed call to smu_cmn_get_sysfs_buf
* errors are returned to caller
* returns 0 on success
additional incidental changes
* changed type of vars i, now to remove comparing mismatch types
* renamed var s/now/cur_value/
* switch statement default now returns -EINVAL
* RAS Recovery returns -EBUSY
Based on
commit b06b48d7dd ("amdgpu/pm: Implement emit_clk_levels for navi10")
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in variable throtting_events, rename
it to throttling_events.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the clearer name `AMDGPU_PP_SENSOR_GPU_AVG_POWER` instead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran can only return average socket power for the first die.
The other dies return 0. Instead of returning a bad value, return
-EOPNOTSUPP so that the attribute will be hidden.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
aldebaran_get_gpu_power() is only called by one place and just calls
aldebaran_get_smu_metrics_data(), so drop the helper.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some GPUs have been overloading average power values and input power
values. To disambiguate these, introduce a new
`AMDGPU_PP_SENSOR_GPU_INPUT_POWER` and the GPUs that share input
power update to use this instead of average power.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2746
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
ERROR: space required after that ',' (ctx:VxV)
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: else should follow close brace '}'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).
it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use the interface version directly from PMFW interface header file rather
than keeping another definition in common smu13 file.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[v2]
simplified fix after Lijo's feedback
removed clocks.num_levels from calculation of loop count
removed unsafe accesses to shim table freq_values
retained corner case output only min,now if
clocks.num_levels == 1 && now > min
[v1]
added a check to populate and use SCLK shim table freq_values only
if using dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL or
AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM
removed clocks.num_levels from calculation of shim table size
removed unsafe accesses to shim table freq_values
output gfx_table values if using other dpm levels
added check for freq_match when using freq_values for when now == min_clk
== Test ==
LOGFILE=aldebaran-sclk.test.log
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
lspci -nn | grep "VGA\|Display" > $LOGFILE
FILES="pp_od_clk_voltage
pp_dpm_sclk"
for f in $FILES
do
echo === $f === >> $LOGFILE
cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[v2]
No Changes, added RB
[v1]
Size of pp_clock_levels_with_latency is PP_MAX_CLOCK_LEVELS, not MAX_NUM_CLOCKS.
Both are currently defined as 16, modifying in case one value is modified in future
Changed code in both arcturus and aldabaran.
Also removed unneeded var count, and used min_t function
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can eventaully use them in the common smu code for
accessing the SMU mailboxes without needing a lot of
per asic logic in the common code.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU add a new variable mca_ceumc_addr to record
umc correctable error address in EccInfo table,
driver side add EccInfo_V2_t to support this feature
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On aldebaran, when thermal throttling happens due to excessive GPU
temperature, the reason for throttling event is missed in warning
message. This patch fixes it.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is abstracted well enough in the get_metrics_data function, so use
the function
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support message SMU update bad channel info to update HBM bad channel
info in OOB table
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use uint64_t instead of an array of uint32_t. This can avoid
some non-necessary intermediate uint32_t -> uint64_t conversions.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The FRU and RAS EEPROMs share the same I2C bus on Aldebaran and Vega 20
ASICs. Set the FRU bus "pointer" to this single bus, as access to the FRU
is sought through that bus "pointer" and not through the RAS bus "pointer".
Cc: Roy Sun <Roy.Sun@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: 2f60dd5076 ("drm/amd: Expose the FRU SMU I2C bus")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return an error if someone tries to use the i2c bus when the
SMU is not running. Otherwise we can end up sending commands
to the SMU which will either get ignored or could cause other
issues depending on what state the GPU and SMU are in.
Cc: Luben.Tuikov@amd.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose both SMU I2C buses. Some boards use the same bus for both the RAS
and FRU EEPROMs and others use different buses. This enables the
additional I2C bus and sets the right buses to use for RAS and FRU EEPROM
access.
Cc: Roy Sun <Roy.Sun@amd.com>
Co-developed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all those APIs are already protected either by adev->pm.mutex
or smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of centralizing all headers in the same folder. Separate them into
different folders and place them among those source files those who really
need them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can cover the power implementation details. And as what did for
powerplay framework, we hook the smu_context to adev->powerplay.pp_handle.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW only returns 0 on master die and sends NACK back on other dies for
the message.
v2: only send GmiPwrDnControl msg on master die instead of all
dies.
v3: remove the pointer check for get_socket_id and get_die_id as they
should be present on Aldebaran.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Aldebaran, the serial may be obtained from the FRU. Only overwrite
the serial with the unique_id if the serial is empty. This will support
printing serial numbers for mGPU devices where there are 2 unique_ids
for the 2 GPUs, but only one serial number for the board
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Aldebaran chip passthrough case we need to intimate SMU
about special handling for SBR.On older chips we send
LightSBR to SMU, enabling the same for Aldebaran. Slight
difference, compared to previous chips, is on Aldebaran, SMU
would do a heavy reset on SBR. Hence, the word Heavy
instead of Light SBR is used for SMU to differentiate.
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: sashank saye <sashank.saye@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the message argument.
0: Allow power down
1: Disallow power down
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power states are not valid for arcturus and aldebaran, no need to
allocate memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support ECC TABLE message, this table include umc ras error count
and error address
v2:
add smu version check to query whether support ecctable
call smu_cmn_update_table to get ecctable directly
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If gpu reset is triggered by ras fatal error, tell it to smu in mode-1
reset message.
v2: move mode-1 reset function to aldebaran_ppt.c since it's aldebaran
specific currently.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
The "Board Parameters" members of the structs:
struct atom_smc_dpm_info_v4_5
struct atom_smc_dpm_info_v4_6
struct atom_smc_dpm_info_v4_7
struct atom_smc_dpm_info_v4_10
are written to the corresponding members of the corresponding PPTable_t
variables, but they lack destination size bounds checking, which means
the compiler cannot verify at compile time that this is an intended and
safe memcpy().
Since the header files are effectively immutable[1] and a struct_group()
cannot be used, nor a common struct referenced by both sides of the
memcpy() arguments, add a new helper, amdgpu_memcpy_trailing(), to
perform the bounds checking at compile time. Replace the open-coded
memcpy()s with amdgpu_memcpy_trailing() which includes enough context
for the bounds checking.
"objdump -d" shows no object code changes.
[1] https://lore.kernel.org/lkml/e56aad3c-a06f-da07-f491-a894a570d78f@amd.com
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Feifei Xu <Feifei.Xu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Jiawei Gu <Jiawei.Gu@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the following message is allowed in sriov mode:
1. GetEnabledSmuFeaturesLow
2. GetEnabledSmuFeaturesHigh
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
1. change return value to avoid smu driver probe fails when FEATURE_PPT is
not enabled.
2. if FEATURE_PPT is not enabled, set power limit value to 0.
v2:
instead dev_err with dev_warn
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the following feature is wrong, it will cause sysnode of pp_features show error:
1. DPM_XGMI
2. VCN_DPM
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
correct smu feature mapping: FEATURE_DATA_CALCULATIONS
it will cause sysfs node of "pp_features" show error.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yifan Zhang
Ma Jun
Lijo Lazar
Le Ma
Darren Powell
Colin Ian King
Mario Limonciello
Ran Sun
Yang Wang
Evan Quan
Alex Deucher
Stanley.Yang
Kent Russell
Luben Tuikov
Tao Zhou
sashank saye
Lang Yu
Kees Cook
Kevin Wang