mirror of https://github.com/torvalds/linux.git
2158 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Randy Dunlap
|
87dbc209ea |
local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Linus Torvalds
|
e2ae634014 |
RISC-V Patches for the 5.11 Merge Window, Part 1
We have a handful of new kernel features for 5.11:
* Support for the contiguous memory allocator.
* Support for IRQ Time Accounting
* Support for stack tracing
* Support for strict /dev/mem
* Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending along
either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the
.text.init alignment patch. With any luck we'll sort out the issue, but
given how many bugs get fixed all over the place and how unrelated those
features seem my guess is that we're just running into something that's
been lurking for a while and has already been fixed in the newer QEMU
(though I wouldn't be surprised if it's one of these implicit
assumptions we have in the boot flow). If it was hardware I'd be
strongly inclined to look more closely, but given that users can upgrade
their simulators I'm less worried about it.
There are two merge conflicts, both in build files. They're both a bit
clunky: arch/riscv/Kconfig is out of order (I have a script that's
supposed to keep them in order, I'll fix it) and lib/Makefile is out of
order (though GENERIC_LIB here doesn't mean quite what it does above).
-----BEGIN PGP SIGNATURE-----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=GWIH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new kernel features for 5.11:
- Support for the contiguous memory allocator.
- Support for IRQ Time Accounting
- Support for stack tracing
- Support for strict /dev/mem
- Support for kernel section protection
I'm being a bit conservative on the cutoff for this round due to the
timing, so this is all the new development I'm going to take for this
cycle (even if some of it probably normally would have been OK). There
are, however, some fixes on the list that I will likely be sending
along either later this week or early next week.
There is one issue in here: one of my test configurations
(PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
the .text.init alignment patch.
With any luck we'll sort out the issue, but given how many bugs get
fixed all over the place and how unrelated those features seem my
guess is that we're just running into something that's been lurking
for a while and has already been fixed in the newer QEMU (though I
wouldn't be surprised if it's one of these implicit assumptions we
have in the boot flow). If it was hardware I'd be strongly inclined to
look more closely, but given that users can upgrade their simulators
I'm less worried about it"
* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
arm64: Use the generic devmem_is_allowed()
arm: Use the generic devmem_is_allowed()
RISC-V: Use the new generic devmem_is_allowed()
lib: Add a generic version of devmem_is_allowed()
riscv: Fixed kernel test robot warning
riscv: kernel: Drop unused clean rule
riscv: provide memmove implementation
RISC-V: Move dynamic relocation section under __init
RISC-V: Protect all kernel sections including init early
RISC-V: Align the .init.text section
RISC-V: Initialize SBI early
riscv: Enable ARCH_STACKWALK
riscv: Make stack walk callback consistent with generic code
riscv: Cleanup stacktrace
riscv: Add HAVE_IRQ_TIME_ACCOUNTING
riscv: Enable CMA support
riscv: Ignore Image.* and loader.bin
riscv: Clean up boot dir
riscv: Fix compressed Image formats build
RISC-V: Add kernel image sections to the resource tree
|
|
|
Linus Torvalds
|
157807123c |
asm-generic: mmu-context cleanup
This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1LsACgkQmmx57+YA GNm6kBAAq4/n6nuNnh6b9LhjXaZRG75gEyW7JvHl8KE5wmZHwDHqbwiQgU1b3lUs JJGbfKqi5ASKxNg6MpfYodmCOqeTUUYG0FUCb6lMhcxxMdfLTLYBvkNd6Y143M+T boi5b/iz+OUQdNPzlVeSsUEVsD59FIXmP/GhscWZN9VAyf/aLV2MDBIOhrDSJlPo ObexnP0Iw1E1NRQYDQ6L2dKTHa6XmHyUtw40ABPmd/6MSd1S+D+j3FGg+CYmvnzG k9g8FbNby8xtUfc0pZV4W/322WN8cDFF9bc04eTDZiAv1bk9lmfvWJ2bWjs3s2qt RO/suiZEOAta/WUX9vVLgYn2td00ef+AyjNUgffiUfvQfl++fiCDFTGl+MoCLjbh xQUPcRuRdED7bMKNrC0CcDOSwWEBWVXvkU/szBLDeE1sPjXzGQ80q1Y72k9y961I mqg7FrHqjZsxT9luXMAzClHNhXAtvehkJZBIdHlFok83EFoTQp48Da4jaDuOOhlq p/lkPJWOHegIQMWtGwRyGmG1qzil7b/QBNAPLgu9pF4TA+ySRBEB2BOr2jRSkj6N mNTHQbSYxBoktdt+VhtrSsxR+i8lwlegx+RNRFmKK3VH5da2nfiBaOY7zBQQHxCK yxQvXvsljSVpfkFKLc/S2nLQL1zTkRfFKV1Xmd3+3owR+EoqM60= =NpMX -----END PGP SIGNATURE----- Merge tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ... |
|
|
Linus Torvalds
|
e2dc495734 |
asm-generic cleanups for v5.11
These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y10UACgkQmmx57+YA GNmJ8A/6A5iIFTJu48fEb4aVDXkW3WLsgRJ+pPt+sFqNhLJu6yi+HftNPhvfaXuJ 1/S2uqAc2VA8WbHn+KTqPk5SsBh5urI6c4DXxTDHihMT6lIqjRbhKIoIaFx7Vl8d 1CERQTqgJMmGNjrZkOnD3qsud9tbUh/dJZl3UuDYmYmgPw/p+y79mGIwAzvHYsU9 QdazdV6v22ceagp2QSLYTr7LN6pShijyXqcJ4ko9Zhzpj1TNsBF97nKIww/vMm3k XRLBDbPfTcGrUtQmDQ+lVWPNpFbiR2iZuC/CBy4e0MbpQP5l9zoVG7d60Imvi/17 9+vWmvng9ehFiyM5fRYG67L+cKVbPhVMW1TmUpxg88KvznudHKgV0jwXRZV2EO10 /RpVQIJ0rLODx2myEZd8Rqhv2UVmjJmViPq7Hr/D8C+JcwdtfcPnziQteBOB0piz QI1h0me+0Yj90nLpjWBGCwUnFh+8/SAoKkwViCxA+Jmn6/34hh0/5w9ExoI+4Frr 8KlHu5wZ6O0mqWT0INrbeb0nmktFOL9tGwTrHa8Z723osB1nuVtTAvHxWCOSlVDd XkuViDLkcJn4B+7EcUoR1YY9wCwK5eHcvA/h/44Y7xU5k4OEJP5hFhXy4ew2CCbE OpazsuCABkpno/WbLoJSdEA+2Dv/uiN5ChNjACgWBN2M4LlKBGs= =c2xf -----END PGP SIGNATURE----- Merge tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic" * tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Fix file comments for syscalls implemented in kernel/sys.c ctype.h: remove duplicate isdigit() helper qspinlock: use signed temporaries for cmpxchg asm-generic: fix ffs -Wshadow warning asm-generic: percpu: avoid Wshadow warning asm-generic/sembuf: Update architecture related information in comment |
|
Christophe Leroy
|
0a571b085f |
asm-generic: force inlining of get_order() to work around gcc10 poor decision
When building mpc885_ads_defconfig with gcc 10.1,
the function get_order() appears 50 times in vmlinux:
[linux]# ppc-linux-objdump -x vmlinux | grep get_order | wc -l
50
[linux]# size vmlinux
text data bss dec hex filename
3842620 675624 135160 4653404 47015c vmlinux
In the old days, marking a function 'static inline' was forcing GCC to
inline, but since commit
|
|
|
Linus Torvalds
|
2cffa11e2a |
Generic interrupt and irqchips subsystem:
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
The rare event of not having completely new chip driver code, just new
DT bindings and extensions of existing drivers to accomodate new
variants!
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups
Thanks,
tglx
-----BEGIN PGP SIGNATURE-----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=iytv
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Generic interrupt and irqchips subsystem updates. Unusually, there is
not a single completely new irq chip driver, just new DT bindings and
extensions of existing drivers to accomodate new variants!
Core:
- Consolidation and robustness changes for irq time accounting
- Cleanup and consolidation of irq stats
- Remove the fasteoi IPI flow which has been proved useless
- Provide an interface for converting legacy interrupt mechanism into
irqdomains
Drivers:
- Preliminary support for managed interrupts on platform devices
- Correctly identify allocation of MSIs proxyied by another device
- Generalise the Ocelot support to new SoCs
- Improve GICv4.1 vcpu entry, matching the corresponding KVM
optimisation
- Work around spurious interrupts on Qualcomm PDC
- Random fixes and cleanups"
* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
driver core: platform: Add devm_platform_get_irqs_affinity()
ACPI: Drop acpi_dev_irqresource_disabled()
resource: Add irqresource_disabled()
genirq/affinity: Add irq_update_affinity_desc()
irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
platform-msi: Track shared domain allocation
irqchip/ti-sci-intr: Fix freeing of irqs
irqchip/ti-sci-inta: Fix printing of inta id on probe success
drivers/irqchip: Remove EZChip NPS interrupt controller
Revert "genirq: Add fasteoi IPI flow"
irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
irqchip/ocelot: Add support for Jaguar2 platforms
irqchip/ocelot: Add support for Serval platforms
irqchip/ocelot: Add support for Luton platforms
irqchip/ocelot: prepare to support more SoC
...
|
|
Thomas Gleixner
|
3c41e57a1e |
irqchip updates for Linux 5.11
- Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl/Uxq8PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpDoW0P/0ZMDvFPxrfnJD46exUgUOPuuFF8jZxAlxD8 7UExqar7u6yX7bbq394jPgtOOxldDagfCx/jCXgb9ja7DK5EHKRcrfjaDT8knHi2 Keg5RaRMRi9TVltvWQTxAkXwSv0Atl881qqsndPeZCez0GNZp+HB34s+rNkZwBOu MBrWihMQOSv5QE6milsNc7HXLSHM1eLZ7Y2XgumNtKrIGEX9yZI7qwdMofwP8Za3 ayMOvc1WAWaTJI7Mg5ac1yTCVbqLmRHhCtws6c6DMgaRu6SI0itmbpQzkDuJJIe3 k9h4KQPaKAFcQsoo3GV0MKTMm63eq82XT3CAdv+htYRY1z95D2+nzNK+mJtsGptX gJ2zeJkUb4u+yVtNguL9qjo5ssCXV/6IybJxv6baaEFnSwQMUwqa066NdxmtqfIe 1BOWnc153a7SRbQ34M9/llje+v8YJbueGMS2RFR2LQ6IjjpaHsXh+YCZokfA/kdk zGbOUD5WWFtFD1T3UoaJ4gFt+pzHjNqym4CcEj4S1Vf5y+POUkNmC+GYK+xfm2Fp WJMbdIUxJhHFRD9L1ShtfAVUSbp712VOOdILp9rYAkOdqfb51BVUiMUP++s2dGp1 ZIT78qt7kTKT1CxbDdFAjzsi7RoMqdSGYgKmG4sVprELeZnFwq47nBkBr8XEQ1TT 0ccEUOY8 =7Z24 -----END PGP SIGNATURE----- Merge tag 'irqchip-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 5.11 from Marc Zyngier: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org |
|
|
Linus Torvalds
|
148842c98a |
Yet another large set of x86 interrupt management updates:
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead of
having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized IOMMU
when the hypervisor supports it. This has made been possible by the
above modifications and also simplifies the existing workaround in the
HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies.
-----BEGIN PGP SIGNATURE-----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=8Gfs
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"Yet another large set of x86 interrupt management updates:
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead
of having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized
IOMMU when the hypervisor supports it. This has made been possible
by the above modifications and also simplifies the existing
workaround in the HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies"
* tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/ioapic: Cleanup the timer_works() irqflags mess
iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select()
iommu/amd: Fix IOMMU interrupt generation in X2APIC mode
iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled
iommu/amd: Fix union of bitfields in intcapxt support
x86/ioapic: Correct the PCI/ISA trigger type selection
x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index
x86/hyperv: Enable 15-bit APIC ID if the hypervisor supports it
x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected
iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available
x86/apic: Support 15 bits of APIC ID in MSI where available
x86/ioapic: Handle Extended Destination ID field in RTE
iommu/vt-d: Simplify intel_irq_remapping_select()
x86: Kill all traces of irq_remapping_get_irq_domain()
x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain
x86/hpet: Use irq_find_matching_fwspec() to find remapping irqdomain
iommu/hyper-v: Implement select() method on remapping irqdomain
iommu/vt-d: Implement select() method on remapping irqdomain
iommu/amd: Implement select() method on remapping irqdomain
x86/apic: Add select() method on vector irqdomain
...
|
|
|
Linus Torvalds
|
edd7ab7684 |
The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic implementation
which builds the base for the kmap_local() API and make the
kmap_atomic() interface wrappers which handle the disabling/enabling of
preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a mapping
is established. It has to disable migration instead to guarantee that
the virtual address of the mapped slot is the same accross preemption.
- Provide better debug facilities: guard pages and enforced utilization
of the mapping mechanics on 64bit systems when the architecture allows
it.
- Provide the new kmap_local() API which can now be used to cleanup the
kmap_atomic() usage sites all over the place. Most of the usage sites
do not require the implicit disabling of preemption and pagefaults so
the penalty on 64bit and 32bit non-highmem systems is removed and quite
some of the code can be simplified. A wholesale conversion is not
possible because some usage depends on the implicit side effects and
some need to be cleaned up because they work around these side effects.
The migrate disable side effect is only effective on highmem systems
and when enforced debugging is enabled. On 64bit and 32bit non-highmem
systems the overhead is completely avoided.
-----BEGIN PGP SIGNATURE-----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=n71I
-----END PGP SIGNATURE-----
Merge tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kmap updates from Thomas Gleixner:
"The new preemtible kmap_local() implementation:
- Consolidate all kmap_atomic() internals into a generic
implementation which builds the base for the kmap_local() API and
make the kmap_atomic() interface wrappers which handle the
disabling/enabling of preemption and pagefaults.
- Switch the storage from per-CPU to per task and provide scheduler
support for clearing mapping when scheduling out and restoring them
when scheduling back in.
- Merge the migrate_disable/enable() code, which is also part of the
scheduler pull request. This was required to make the kmap_local()
interface available which does not disable preemption when a
mapping is established. It has to disable migration instead to
guarantee that the virtual address of the mapped slot is the same
across preemption.
- Provide better debug facilities: guard pages and enforced
utilization of the mapping mechanics on 64bit systems when the
architecture allows it.
- Provide the new kmap_local() API which can now be used to cleanup
the kmap_atomic() usage sites all over the place. Most of the usage
sites do not require the implicit disabling of preemption and
pagefaults so the penalty on 64bit and 32bit non-highmem systems is
removed and quite some of the code can be simplified. A wholesale
conversion is not possible because some usage depends on the
implicit side effects and some need to be cleaned up because they
work around these side effects.
The migrate disable side effect is only effective on highmem
systems and when enforced debugging is enabled. On 64bit and 32bit
non-highmem systems the overhead is completely avoided"
* tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
ARM: highmem: Fix cache_is_vivt() reference
x86/crashdump/32: Simplify copy_oldmem_page()
io-mapping: Provide iomap_local variant
mm/highmem: Provide kmap_local*
sched: highmem: Store local kmaps in task struct
x86: Support kmap_local() forced debugging
mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
microblaze/mm/highmem: Add dropped #ifdef back
xtensa/mm/highmem: Make generic kmap_atomic() work correctly
mm/highmem: Take kmap_high_get() properly into account
highmem: High implementation details and document API
Documentation/io-mapping: Remove outdated blurb
io-mapping: Cleanup atomic iomap
mm/highmem: Remove the old kmap_atomic cruft
highmem: Get rid of kmap_types.h
xtensa/mm/highmem: Switch to generic kmap atomic
sparc/mm/highmem: Switch to generic kmap atomic
powerpc/mm/highmem: Switch to generic kmap atomic
nds32/mm/highmem: Switch to generic kmap atomic
...
|
|
|
Linus Torvalds
|
76d4acf22b |
perf/kprobes updates:
- Make kretprobes lockless to avoid the rp->lock performance and potential
lock ordering issues.
-----BEGIN PGP SIGNATURE-----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=PDBa
-----END PGP SIGNATURE-----
Merge tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf/kprobes updates from Thomas Gleixner:
"Make kretprobes lockless to avoid the rp->lock performance and
potential lock ordering issues"
* tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomics: Regenerate the atomics-check SHA1's
kprobes: Replace rp->free_instance with freelist
freelist: Implement lockless freelist
asm-generic/atomic: Add try_cmpxchg() fallbacks
kprobes: Remove kretprobe hash
llist: Add nonatomic __llist_add() and __llist_dell_all()
|
|
|
Linus Torvalds
|
1ac0884d54 |
A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for non-x86
specific TIF flags which are solely relevant for syscall related work
and have been moved into their own storage space. The x86 specific part
had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is going to
come seperate via Jens.
- The selective syscall redirection facility which provides a clean and
efficient way to support the non-Linux syscalls of WINE by catching them
at syscall entry and redirecting them to the user space emulation. This
can be utilized for other purposes as well and has been designed
carefully to avoid overhead for the regular fastpath. This includes the
core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the users
of the generic entry code which guarantee the proper ordering and
protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall restart
mechanism.
-----BEGIN PGP SIGNATURE-----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=hsjV
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry/exit updates from Thomas Gleixner:
"A set of updates for entry/exit handling:
- More generalization of entry/exit functionality
- The consolidation work to reclaim TIF flags on x86 and also for
non-x86 specific TIF flags which are solely relevant for syscall
related work and have been moved into their own storage space. The
x86 specific part had to be merged in to avoid a major conflict.
- The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal
delivery mode of task work and results in an impressive performance
improvement for io_uring. The non-x86 consolidation of this is
going to come seperate via Jens.
- The selective syscall redirection facility which provides a clean
and efficient way to support the non-Linux syscalls of WINE by
catching them at syscall entry and redirecting them to the user
space emulation. This can be utilized for other purposes as well
and has been designed carefully to avoid overhead for the regular
fastpath. This includes the core changes and the x86 support code.
- Simplification of the context tracking entry/exit handling for the
users of the generic entry code which guarantee the proper ordering
and protection.
- Preparatory changes to make the generic entry code accomodate S390
specific requirements which are mostly related to their syscall
restart mechanism"
* tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
entry: Add syscall_exit_to_user_mode_work()
entry: Add exit_to_user_mode() wrapper
entry_Add_enter_from_user_mode_wrapper
entry: Rename exit_to_user_mode()
entry: Rename enter_from_user_mode()
docs: Document Syscall User Dispatch
selftests: Add benchmark for syscall user dispatch
selftests: Add kselftest for syscall user dispatch
entry: Support Syscall User Dispatch on common syscall entry
kernel: Implement selective syscall userspace redirection
signal: Expose SYS_USER_DISPATCH si_code type
x86: vdso: Expose sigreturn address on vdso to the kernel
MAINTAINERS: Add entry for common entry code
entry: Fix boot for !CONFIG_GENERIC_ENTRY
x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs
sched: Detect call to schedule from critical entry code
context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK
context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK
x86: Reclaim unused x86 TI flags
...
|
|
Palmer Dabbelt
|
7d95a88f92
|
Add and use a generic version of devmem_is_allowed()
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed() |
|
|
Palmer Dabbelt
|
527701eda5
|
lib: Add a generic version of devmem_is_allowed()
As part of adding support for STRICT_DEVMEM to the RISC-V port, Zong provided a devmem_is_allowed() implementation that's exactly the same as all the others I checked. Instead I'm adding a generic version, which will soon be used. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> |
|
Marc Zyngier
|
91f90daa4f |
platform-msi: Track shared domain allocation
We have two flavours of platform-MSI: - MSIs generated by devices for themselves (the usual case) - MSIs generated on behalf of other devices, as the generating device is some form of bridge (either a wire-to-MSI bridge, or even a non-transparent PCI bridge that repaints the PCI requester ID). In the latter case, the underlying interrupt architecture may need to track this in order to keep the mapping alive even when no MSI are currently being generated. Add a set of flags to the generic msi_alloc_info_t structure, as well as the MSI_ALLOC_FLAGS_PROXY_DEVICE flag that will get advertized by the platform-MSI code when allocating an irqdomain for a device. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20201129135208.680293-2-maz@kernel.org |
|
|
Thomas Gleixner
|
6e799cb69a |
mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL
CONFIG_KMAP_LOCAL can be enabled by x86/32bit even if CONFIG_HIGHMEM is not enabled for temporary MMIO space mappings. Provide it as a seperate config option which depends on CONFIG_KMAP_LOCAL and let CONFIG_DEBUG_HIGHMEM select it. This won't increase the debug coverage of this significantly but it paves the way to do so. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20201118204006.869487226@linutronix.de |
|
|
Thomas Gleixner
|
e091bc90cd |
irqstat: Move declaration into asm-generic/hardirq.h
Move the declaration of the irq_cpustat per cpu variable to asm-generic/hardirq.h and remove the now empty linux/irq_cpustat.h header. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20201113141733.737377332@linutronix.de |
|
|
Thomas Gleixner
|
1adb99eabc |
asm-generic/irqstat: Add optional __nmi_count member
Add an optional __nmi_count member to irq_cpustat_t so more architectures can use the generic version. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20201113141733.501611990@linutronix.de |
|
Gabriel Krisman Bertazi
|
785dc4eb7f |
audit: Migrate to use SYSCALL_WORK flag
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_AUDIT, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-9-krisman@collabora.com |
|
|
Gabriel Krisman Bertazi
|
64c19ba29b |
ptrace: Migrate to use SYSCALL_TRACE flag
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_TRACE, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-7-krisman@collabora.com |
|
|
Gabriel Krisman Bertazi
|
23d67a5485 |
seccomp: Migrate to use SYSCALL_WORK flag
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SECCOMP, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-5-krisman@collabora.com |
|
|
Linus Torvalds
|
a50cf15906 |
Merge branch 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix and cleanup from Dennis Zhou: "A fix for a Wshadow warning in the asm-generic percpu macros came in and then I tacked on the removal of flexible array initializers in the percpu allocator" * 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: convert flexible array initializers to use struct_size() asm-generic: percpu: avoid Wshadow warning |
|
Arvind Sankar
|
3347acc6fc |
compiler.h: fix barrier_data() on clang
Commit |
|
Ingo Molnar
|
a70a04b384 |
locking/atomics: Regenerate the atomics-check SHA1's
The include/asm-generic/atomic-instrumented.h checksum got out of sync, so regenerate it. (No change to actual code.) Also make scripts/atomic/gen-atomics.sh executable, to make it easier to use. The auto-generated atomic header signatures are now fine: thule:~/tip> scripts/atomic/check-atomics.sh thule:~/tip> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Ingo Molnar
|
666fab4a3e |
Merge branch 'linus' into perf/kprobes
Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c
Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:
645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")
Since the new code *should* be fine without nesting.
Knock on wood ...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Thomas Gleixner
|
d7029e4549 |
highmem: Get rid of kmap_types.h
The header is not longer used and on alpha, ia64, openrisc, parisc and um it was completely unused anyway as these architectures have no highmem support. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095858.422094352@linutronix.de |
|
|
Thomas Gleixner
|
4f8b96cd47 |
asm-generic: Provide kmap_size.h
kmap_types.h is a misnomer because the old atomic MAP based array does not
exist anymore and the whole indirection of architectures including
kmap_types.h is inconinstent and does not allow to provide guard page
debugging for this misfeature.
Add a common header file which defines the mapping stack size for all
architectures. Will be used when converting architectures over to a
generic kmap_local/atomic implementation.
The array size is chosen with the following constraints in mind:
- The deepest nest level in one context is 3 according to code
inspection.
- The worst case nesting for the upcoming reemptible version would be:
2 maps in task context and a fault inside
2 maps in the fault handler
3 maps in softirq
2 maps in interrupt
So a total of 16 is sufficient and probably overestimated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20201103095857.078043987@linutronix.de
|
|
|
Linus Torvalds
|
11ad2a73de |
asm-generic: fixes for v5.10
There is one small bugfix, fixing a build regression for RISC-V
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=vygx
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"One small bugfix, fixing a build regression for RISC-V"
* tag 'asm-generic-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: mark __{get,put}_user_fn as __always_inline
|
|
|
Thomas Gleixner
|
8073c1ac82 |
genirq/msi: Allow shadow declarations of msi_msg:: $member
Architectures like x86 have their MSI messages in various bits of the data, address_lo and address_hi field. Composing or decomposing these messages with bitmasks and shifts is possible, but unreadable gunk. Allow architectures to provide an architecture specific representation for each member of msi_msg. Provide empty defaults for each and stick them into an union. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-12-dwmw2@infradead.org |
|
Kees Cook
|
3e6631485f |
vmlinux.lds.h: Keep .ctors.* with .ctors
Under some circumstances, the compiler generates .ctors.* sections. This
is seen doing a cross compile of x86_64 from a powerpc64el host:
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/trace_clock.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ftrace.o' being
placed in section `.ctors.65435'
x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ring_buffer.o' being
placed in section `.ctors.65435'
Include these orphans along with the regular .ctors section.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
|
Christoph Hellwig
|
0bcd0a2be8 |
asm-generic: mark __{get,put}_user_fn as __always_inline
Without the explicit __always_inline, some RISC-V configs place the
functions out of line, triggering the BUILD_BUG_ON checks in the
function.
Fixes:
|
|
Arnd Bergmann
|
29813a2297 |
asm-generic: percpu: avoid Wshadow warning
Nesting macros that use the same local variable names causes warnings when building with "make W=2": include/asm-generic/percpu.h:117:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] include/asm-generic/percpu.h:126:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] These are fairly harmless, but since the warning comes from a global header, the warning happens every time the headers are included, which is fairly annoying. Rename the variables to avoid shadowing and shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> |
|
|
Arnd Bergmann
|
f44ca0871b |
qspinlock: use signed temporaries for cmpxchg
When building with W=2, the build log is flooded with
include/asm-generic/qrwlock.h:65:56: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
include/asm-generic/qrwlock.h:92:53: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
include/asm-generic/qspinlock.h:68:55: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
include/asm-generic/qspinlock.h:82:52: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign]
The atomics are built on top of signed integers, but the caller
doesn't actually care. Just use signed types as well.
Fixes:
|
|
|
Arnd Bergmann
|
6f6573a404 |
asm-generic: fix ffs -Wshadow warning
gcc -Wshadow warns about the ffs() definition that has the same name as the global ffs() built-in: include/asm-generic/bitops/builtin-ffs.h:13:28: warning: declaration of 'ffs' shadows a built-in function [-Wshadow] This is annoying because 'make W=2' warns every time this header gets included. Change it to use a #define instead, making callers directly reference the builtin. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Arnd Bergmann
|
80b4707a2f |
asm-generic: percpu: avoid Wshadow warning
Nesting macros that use the same local variable names causes warnings when building with "make W=2": include/asm-generic/percpu.h:117:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] include/asm-generic/percpu.h:126:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] These are fairly harmless, but since the warning comes from a global header, the warning happens every time the headers are included, which is fairly annoying. Rename the variables to avoid shadowing and shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
Nicholas Piggin
|
94f89922e1 |
asm-generic: add generic MMU versions of mmu context functions
Many of these are no-ops on many architectures, so extend mmu_context.h to cover MMU and NOMMU, and split the NOMMU bits out to nommu_context.h Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
Joe Perches
|
33def8498f |
treewide: Convert macro and uses of __section(foo) to __section("foo")
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Linus Torvalds
|
0593c1b459 |
RISC-V Patches for the 5.10 Merge Window, Part 2
This actually just contains a single patch set:
* The remainder of Christoph's work to remove set_fs, including the RISC-V
portion.
-----BEGIN PGP SIGNATURE-----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=EaJX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"Just a single patch set: the remainder of Christoph's work to remove
set_fs, including the RISC-V portion"
* tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: remove address space overrides using set_fs()
riscv: implement __get_kernel_nofault and __put_user_nofault
riscv: refactor __get_user and __put_user
riscv: use memcpy based uaccess for nommu again
asm-generic: make the set_fs implementation optional
asm-generic: add nommu implementations of __{get,put}_kernel_nofault
asm-generic: improve the nommu {get,put}_user handling
uaccess: provide a generic TASK_SIZE_MAX definition
|
|
|
Linus Torvalds
|
746b25b1aa |
Kbuild updates for v5.10
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
|
|
|
Linus Torvalds
|
00937f36b0 |
pci-v5.10-changes
-----BEGIN PGP SIGNATURE-----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=RCFo
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
|
|
Linus Torvalds
|
7cf726a594 |
linux-kselftest-kunit-5.10-rc1
This Kunit update for Linux 5.10-rc1 consists of: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This patch is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl+Mr68ACgkQCwJExA0N Qxy7HxAAuToPP6uUHwTC3KzVVE4hjP9a3t4hiD7kP/gI0umN+2nrccm6Vx6E+r9t Jkjiv9Yxj3riOkE5jJ8KriAx228mwz3N1yBEDfpp+8iCWOK3iOuFKKTTWOoZY4hf Enlf7n4Yp2TOEmIH0xwh/H67zl0+3FwT3fGWC6DDPXHuw+X+mGphCl9XPB70rZcT q/s0dwx1CmWBm30MgFXN+SZ7CgLP13lRAvkVO4t56/O1SkTbpCe7U1zqT2p5UoOY x7qvzs3pdCaWbpCsAqFWr46iECDHuVQjIgLuddOF/OgWVcCZlv7T7ESd7IDPHUPx DD3zYG0ODV0jKZHmpwkSojSbu3z6v5FnfhLpAcaHoEMBeRu5UIar7EjPHwqrqiU7 JqE7dBECmcD308sr9u0w44DK15nmsD3+njrBQ/AJmsWdg0wtnMvA01nAHKObbk0n 33aIu4Iny1dH35/rt9dV2DKT09f5r0ANCjoJMX8gu/li66FHGfULOaqr6KLLqi5X VPgHCKzyT9nD+Bc2LYzRWmhhAj+5Iwyglgpe9ZiOlPQ5i+hLvfPPAZxVYSbVA1Sk aVZi+ibKUqHSBfXcaLf/OKX7Csf4zni3F+WfFT5ZIC4Y6iEF+0tvS2HW2/pcUAN/ OSPYYmyqhwYIl8tvbQENgBsyU/K1rECxJpqWAznJLRCebkY5a/s= =0Sco -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kunit updates from Shuah Khan: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern that Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format * tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE lib: kunit: add bitfield test conversion to KUnit Documentation: kunit: add a brief blurb about kunit_test_suite kunit: test: add test plan to KUnit TAP format init: main: add KUnit to kernel init kunit: test: create a single centralized executor for all tests vmlinux.lds.h: add linker section for KUnit test suites Documentation: kunit: Add naming guidelines |
|
|
Linus Torvalds
|
2d0f6b0aab |
hyperv-next for 5.10, part 2
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+IfF4THHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXgdnCACUnI5sKbEN/uEvWz4JGJzTSwr20VHt FkzpbeS4A9vHgl4hXVvGc4eMrwF/RtWY6RrLlJauZSQA1mjU0paAjf2noBFYX41m zHX6f8awJrPd0cFChrOKcAlPnQy5OHYTJb7id2EakGGIrd0rmR/TkVAdEku23SDD N7wheh5dVLnkSPwfiERz8Iq0CswMrSjgTljKnwU7XqUqwcNt+7rLRDFAH/M3NG/x omBrWO8k6t2r0h4otqCQZIyCSLwPO+Wdb9BSaA147eOFHHbhqZlHNJYjIkMROZau CJn7S0nZorsAUvka3l7W8nyMQmK4PXOh36bwkXzpkV4b+lgit0euXIzA =H2vc -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull another Hyper-V update from Wei Liu: "One patch from Michael to get VMbus interrupt from ACPI DSDT" * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT |
|
|
Linus Torvalds
|
5a32c3413d |
dma-mapping updates for 5.10
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
|
Michael Kelley
|
626b901f60 |
Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT
On ARM64, Hyper-V now specifies the interrupt to be used by VMbus in the ACPI DSDT. This information is not used on x86 because the interrupt vector must be hardcoded. But update the generic VMbus driver to do the parsing and pass the information to the architecture specific code that sets up the Linux IRQ. Update consumers of the interrupt to get it from an architecture specific function. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1597434304-40631-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
|
|
Linus Torvalds
|
e18afa5bfa |
Merge branch 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat quotactl cleanups from Al Viro: "More Christoph's compat cleanups: quotactl(2)" * 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: quota: simplify the quotactl compat handling compat: add a compat_need_64bit_alignment_fixup() helper compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h> |
|
|
Linus Torvalds
|
c90578360c |
Merge branch 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
|
|
|
Linus Torvalds
|
dd502a8107 |
This tree introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection) by
modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where
retpolines would otherwise be used, as retpolines can be pretty
slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are used,
with function pointers.
There's a second variant using inline code patching, inspired by jump-labels,
implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of function pointers,
where static calls speed up the PMU handler by 4.2% (!).
The generic implementation is not really excercised on other architectures,
outside of the trivial test_static_call_init() self-test.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JvpF
-----END PGP SIGNATURE-----
Merge tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull static call support from Ingo Molnar:
"This introduces static_call(), which is the idea of static_branch()
applied to indirect function calls. Remove a data load (indirection)
by modifying the text.
They give the flexibility of function pointers, but with better
performance. (This is especially important for cases where retpolines
would otherwise be used, as retpolines can be pretty slow.)
API overview:
DECLARE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL(name, func);
DEFINE_STATIC_CALL_NULL(name, typename);
static_call(name)(args...);
static_call_cond(name)(args...);
static_call_update(name, func);
x86 is supported via text patching, otherwise basic indirect calls are
used, with function pointers.
There's a second variant using inline code patching, inspired by
jump-labels, implemented on x86 as well.
The new APIs are utilized in the x86 perf code, a heavy user of
function pointers, where static calls speed up the PMU handler by
4.2% (!).
The generic implementation is not really excercised on other
architectures, outside of the trivial test_static_call_init()
self-test"
* tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
static_call: Fix return type of static_call_init
tracepoint: Fix out of sync data passing by static caller
tracepoint: Fix overly long tracepoint names
x86/perf, static_call: Optimize x86_pmu methods
tracepoint: Optimize using static_call()
static_call: Allow early init
static_call: Add some validation
static_call: Handle tail-calls
static_call: Add static_call_cond()
x86/alternatives: Teach text_poke_bp() to emulate RET
static_call: Add simple self-test for static calls
x86/static_call: Add inline static call implementation for x86-64
x86/static_call: Add out-of-line static call implementation
static_call: Avoid kprobes on inline static_call()s
static_call: Add inline static call infrastructure
static_call: Add basic static call infrastructure
compiler.h: Make __ADDRESSABLE() symbol truly unique
jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved()
module: Properly propagate MODULE_STATE_COMING failure
module: Fix up module_notifier return values
...
|
|
|
Linus Torvalds
|
34eb62d868 |
Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+Edv4RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hiKBAApdJEOaK7hMc3013DYNctklIxEPJL2mFJ 11YJRIh4pUJTF0TE+EHT/D+rSIuRsyuoSmOQBQ61/wVSnyG067GjjVJRqh/eYaJ1 fDhJi2FuHOjXl+CiN0KxzBjjp+V4NhF7jHT59tpQSvfZeg7FjteoxfztxaCp5ek3 S3wHB3CC4c4jE3lfjHem1E9/PwT4kwPYx1c3gAUdEqJdjkihjX9fWusfjLeqW6/d Y5VkApi6bL9XiZUZj5l0dEIweLJJ86+PkKJqpo3spxxEak1LSn1MEix+lcJ8e1Kg sb/bEEivDcmFlFWOJnn0QLquCR0Cx5bz1pwsL0tuf0yAd4+sXX5IMuGUysZlEdKM BHL9h5HbevGF4BScwZwZH7lyEg7q67s5KnRu4hxy0Swfcj7y0oT/9lXqpbpZ2DqO Hd+bRRQKIbqnTMp0hcit9LfpLp93vj0dBlaV5ocAJJlu62u9VnwGG5HQuZ5giLUr kA1SLw63Y1wopFRxgFyER8les7eLsu0zxHeK44rRVlVnfI99OMTOgVNicmDFy3Fm AfcnfJG0BqBEJGQz5es34uQQKKBwFPtC9NztopI62KiwOspYYZyrO1BNxdOc6DlS mIHrmO89HMXuid5eolvLaFqUWirHoWO8TlycgZxUWVHc2txVPjAEU/axouU/dSSU w/6GpzAa+7g= =fXAw -----END PGP SIGNATURE----- Merge tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull orphan section checking from Ingo Molnar: "Orphan link sections were a long-standing source of obscure bugs, because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms" * tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/boot/compressed: Warn on orphan section placement x86/build: Warn on orphan section placement arm/boot: Warn on orphan section placement arm/build: Warn on orphan section placement arm64/build: Warn on orphan section placement x86/boot/compressed: Add missing debugging sections to output x86/boot/compressed: Remove, discard, or assert for unwanted sections x86/boot/compressed: Reorganize zero-size section asserts x86/build: Add asserts for unwanted sections x86/build: Enforce an empty .got.plt section x86/asm: Avoid generating unused kprobe sections arm/boot: Handle all sections explicitly arm/build: Assert for unwanted sections arm/build: Add missing sections arm/build: Explicitly keep .ARM.attributes sections arm/build: Refactor linker script headers arm64/build: Assert for unwanted sections arm64/build: Add missing DWARF sections arm64/build: Use common DISCARDS in linker script arm64/build: Remove .eh_frame* sections due to unwind tables ... |
|
Peter Zijlstra
|
29f006fdef |
asm-generic/atomic: Add try_cmpxchg() fallbacks
Only x86 provides try_cmpxchg() outside of the atomic_t interfaces, provide generic fallbacks to create this interface from the widely available cmpxchg() function. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/159870621515.1229682.15506193091065001742.stgit@devnote2 |
|
Brendan Higgins
|
90a025a859 |
vmlinux.lds.h: add linker section for KUnit test suites
Add a linker section where KUnit can put references to its test suites. This patch is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. Co-developed-by: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Ingo Molnar
|
d6c4c11348 |
Merge branch 'kcsan' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core
Pull KCSAN updates for v5.10 from Paul E. McKenney: - Improve kernel messages. - Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y. - Optimize debugfs stat counters. - Introduce the instrument_*read_write() annotations, to provide a finer description of certain ops - using KCSAN's compound instrumentation. Use them for atomic RNW and bitops, where appropriate. Doing this might find new races. (Depends on the compiler having tsan-compound-read-before-write=1 support.) - Support atomic built-ins, which will help certain architectures, such as s390. - Misc enhancements and smaller fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org> |