After platform data is gone, we always allocate memory for the slot
information. Incapsulate the array of the latter into the host structure,
so we allocate memory only once. This makes code simpler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240425170900.3767990-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.9-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.10.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There no need to keep a pointer to a platform device as it's not
used outside of ->probe() and ->remove() callbacks.
Replace platform device pointer by generic one in host structure.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240417165708.2965612-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The commit d2c6d518c2 ("mmc: atmel-mci: move atmel MCI header file")
made sure that there is no in-kernel user of the platform data. But
at the same time it hadn't removed the code around that data structure.
Finish the job here and remove a dead code.
Fixes: d2c6d518c2 ("mmc: atmel-mci: move atmel MCI header file")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240417165708.2965612-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Implement the .platform_execute_tuning for Sophgo CV1800B and SG200X.
Some code is borrowed from sdhci-esdhc-imx.c. The tuning result is
similar as the one of SoC vendor's SDK.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240420021429.454-1-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The preceding "&" before th1520_execute_tuning is useless, remove it.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240414164357.2841-1-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The difference between old S3C64xx and newer Exynos4 SDHCI controller
variants is in clock handling (the "no_divider" field in drvdata).
Choose the proper sdhci_ops based on the variant instead of patching
ops in probe, if Exynos4 is used.
This allows making struct sdhci_ops const for code safety and probably
opens further options in the future, as the dynamic pointer ops table is
not anymore that dynamic.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240414-mmc-const-sdhci-ops-v2-5-262f81faadac@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The local struct sdhci_ops can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240414-mmc-const-sdhci-ops-v2-3-262f81faadac@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The irq_handler_t is already defined globally, let's use it
in slot-gpio code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240410195618.1632778-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models
stopped working under Linux after commit 6fd03f0248 ("gpiolib: acpi:
support bias pull disable").
The GPIO in question is connected to a mechanical switch in the slot
which shorts the pin to GND when a card is inserted.
The GPIO pin correctly gets configured with a 20K pull-up by the BIOS,
but there is a bug in the DSDT where the GpioInt for the card-detect is
configured with a PullNone setting:
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0026
}
Linux now actually honors the PullNone setting and disables the 20K pull-up
configured by the BIOS.
Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls
mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for
the Asus T100TA models to fix this.
Fixes: 6fd03f0248 ("gpiolib: acpi: support bias pull disable")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-7-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On the Toshiba WT10-A the microSD slot always reports the card being
write-protected, just like on the Toshiba WT8-B.
Add a DMI quirk to work around this.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-6-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Lenovo Yoga Tablet 2 Pro 1380 sdcard slot has an active high cd pin
and a broken wp pin which always reports the card being write-protected.
Add a DMI quirk to address both issues.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-5-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some mmc host drivers may need to fixup a card-detection GPIO's config
to e.g. enable the GPIO controllers builtin pull-up resistor on devices
where the firmware description of the GPIO is broken (e.g. GpioInt with
PullNone instead of PullUp in ACPI DSDT).
Since this is the exception rather then the rule adding a config
parameter to mmc_gpiod_request_cd() seems undesirable, so instead
add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper
to call gpiod_set_config() on the card-detect GPIO acquired through
mmc_gpiod_request_cd().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When e.g. 8 bytes are to be read, sgm->consumed equals 8 immediately after
sg_miter_next() call. The driver then increments it as bytes are read,
so sgm->consumed becomes 16 and this warning triggers in sg_miter_stop():
WARN_ON(miter->consumed > miter->length);
WARNING: CPU: 0 PID: 28 at lib/scatterlist.c:925 sg_miter_stop+0x2c/0x10c
CPU: 0 PID: 28 Comm: kworker/0:2 Tainted: G W 6.9.0-rc5-dirty #249
Hardware name: Generic DT based system
Workqueue: events_freezable mmc_rescan
Call trace:.
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x44/0x5c
dump_stack_lvl from __warn+0x78/0x16c
__warn from warn_slowpath_fmt+0xb0/0x160
warn_slowpath_fmt from sg_miter_stop+0x2c/0x10c
sg_miter_stop from moxart_request+0xb0/0x468
moxart_request from mmc_start_request+0x94/0xa8
mmc_start_request from mmc_wait_for_req+0x60/0xa8
mmc_wait_for_req from mmc_app_send_scr+0xf8/0x150
mmc_app_send_scr from mmc_sd_setup_card+0x1c/0x420
mmc_sd_setup_card from mmc_sd_init_card+0x12c/0x4dc
mmc_sd_init_card from mmc_attach_sd+0xf0/0x16c
mmc_attach_sd from mmc_rescan+0x1e0/0x298
mmc_rescan from process_scheduled_works+0x2e4/0x4ec
process_scheduled_works from worker_thread+0x1ec/0x24c
worker_thread from kthread+0xd4/0xe0
kthread from ret_from_fork+0x14/0x38
This patch adds initial zeroing of sgm->consumed. It is then incremented
as bytes are read or written.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Fixes: 3ee0e7c3e6 ("mmc: moxart-mmc: Use sg_miter for PIO")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240422153607.963672-1-saproj@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
A series of fixes for n8x0 GPIO regressions caused by the changes to use
GPIO descriptors.
-----BEGIN PGP SIGNATURE-----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=pHnd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=m+W/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.9/n8x0-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
GPIO regression fixes for n8x0
A series of fixes for n8x0 GPIO regressions caused by the changes to use
GPIO descriptors.
* tag 'omap-for-v6.9/n8x0-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
mmc: omap: fix broken slot switch lookup
ARM: OMAP2+: fix N810 MMC gpiod table
ARM: OMAP2+: fix bogus MMC GPIO labels on Nokia N8x0
Link: https://lore.kernel.org/r/pull-1712135932-125424@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge the mmc fixes for v6.9-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.10.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix SD card tuning error by increasing tuning loop count
from 40(MAX_TUNING_LOOP) to 128.
For some reason the tuning algorithm requires to move through all the taps
of delay line even if the THRESHOLD_MODE (bit 2 in AT_CTRL_R) is used
instead of the LARGEST_WIN_MODE.
Tested-by: Drew Fustini <drew@pdp7.com>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 43658a542e ("mmc: sdhci-of-dwcmshc: Add support for T-Head TH1520")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240402093539.184287-1-bigunclemax@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The device_wakeup_disable() call only returns an error if no dev exists,
but there's not much a user can do at that point.
Rather, make this function return void.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge the mmc fixes for v6.9-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.10.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Modules registering driver with sdio_register_driver() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Since many drivers forget to set the .owner, this effectively will fix
them. Examples of fixed drivers are: ath6kl, b43, btsdio.c, ks7010,
libertas, MediaTek WiFi drivers, Realtek WiFi drivers, rsi, siano,
wilc1000, wl1251 and more.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240329-module-owner-sdio-v1-1-e4010b11ccaa@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
d7133797e9 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter
ASPM L1.2") and 36ed2fd32b ("mmc: sdhci-pci-gli: A workaround to allow
GL9755 to enter ASPM L1.2") added writes to the Control register in the
Power Management Capability to put the device in D3hot and back to D0.
Use the pci_set_power_state() interface instead because these are generic
operations that don't need to be driver-specific. Also, the PCI spec
requires some delays after these power transitions, and
pci_set_power_state() takes care of those, while d7133797e9 and
36ed2fd32b did not.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20240327214831.1544595-3-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
015c9cbcf0 ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") added PCI_GLI_9750_CORRERR_MASK, the offset of the AER Capability in
config space, and PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT, the
Replay Timer Timeout bit in the AER Correctable Error Status register.
Use pci_find_ext_capability() to locate the AER Capability and use the
existing PCI_ERR_COR_REP_TIMER definition to mask the bit.
This removes a little bit of unnecessarily device-specific code and makes
AER-related things more greppable.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240327214831.1544595-2-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the existing symbolic permissions to the octal presentation as
this is the preferred representation for debugfs permissions.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20240326094215.212930-1-r.czerwinski@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Generic sdhci code registers LED device and uses host->runtime_suspended
flag to protect access to it. The sdhci-msm driver doesn't set this flag,
which causes a crash when LED is accessed while controller is runtime
suspended. Fix this by setting the flag correctly.
Cc: stable@vger.kernel.org
Fixes: 67e6db113c ("mmc: sdhci-msm: Add pm_runtime and system PM support")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240321-sdhci-mmc-suspend-v1-1-fbc555a64400@8devices.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remove (section: .exit.text)
Fixes: b4cff4549b ("DaVinci: MMC: MMC/SD controller driver for DaVinci family")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240324114017.231936-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For enabling CQE support just set 'supports-cqe' in your DevTree file
for appropriate mmc node.
Signed-off-by: Sergey Khimich <serghox@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240319115932.4108904-3-serghox@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are could be specific limitations for some mmc
controllers for setting cqhci transfer descriptors.
So add callback to allow implement driver specific function.
Signed-off-by: Sergey Khimich <serghox@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240319115932.4108904-2-serghox@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The sdhci_am654_set_clock function is also used to enable
delay chain, therefore fix comments to be more generic in
case we are not enabling DLL.
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-6-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
While integer type works, the otap_del_sel and itap_del_sel
arrays are manipulated as u32, so change array types to u32.
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-5-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
While STRB is currently used for DATA and CRC responses, the CMD
responses from the device to the host still require ITAPDLY for
HS400 timing.
Currently what is stored for HS400 is the ITAPDLY from High Speed
mode which is incorrect. The ITAPDLY for HS400 speed mode should
be the same as ITAPDLY as HS200 timing after tuning is executed.
Add the functionality to save ITAPDLY from HS200 tuning and save
as HS400 ITAPDLY.
Fixes: a161c45f29 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-8-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add ITAPDLYSEL to sdhci_j721e_4bit_set_clock function.
This allows to set the correct ITAPDLY for timings that
do not carry out tuning.
Fixes: 1accbced1c ("mmc: sdhci_am654: Add Support for 4 bit IP on J721E")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-7-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently the OTAP/ITAP delay enable functionality is incorrect in
the am654_set_clock function. The OTAP delay is not enabled when
timing < SDR25 bus speed mode. The ITAP delay is not enabled for
timings that do not carry out tuning.
Add this OTAP/ITAP delay functionality according to the datasheet
[1] OTAPDLYENA and ITAPDLYENA for MMC0.
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
Fixes: 8ee5fc0e0b ("mmc: sdhci_am654: Update OTAPDLY writes")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-4-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For DDR52 timing, DLL is enabled but tuning is not carried
out, therefore the ITAPDLY value in PHY CTRL 4 register is
not correct. Fix this by writing ITAPDLY after enabling DLL.
Fixes: a161c45f29 ("mmc: sdhci_am654: Enable DLL only for some speed modes")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-3-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently the sdhci_am654 driver only supports one tuning
algorithm which should be used only when DLL is enabled. The
ITAPDLY is selected from the largest passing window and the
buffer is viewed as a circular buffer.
The new algorithm should be used when the delay chain
is enabled. The ITAPDLY is selected from the largest passing
window and the buffer is not viewed as a circular buffer.
This implementation is based off of the following paper: [1].
Also add support for multiple failing windows.
[1] https://www.ti.com/lit/an/spract9/spract9.pdf
Fixes: 13ebeae68a ("mmc: sdhci_am654: Add support for software tuning")
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240320223837.959900-2-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() will be converted as weel if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240314091512.1323650-1-lizhijian@fujitsu.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The err is being set to 0 and replaced every time after this
assignment. Remove this assignment as it is extraneous.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240307145013.2721326-1-usama.anjum@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The err is being set to 0 and replaced every time after this
assignment. Remove this assignment as it is extraneous.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307122129.2359553-1-usama.anjum@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240307114500.3643489-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It seems the of_get_named_gpio() is solely used to check
if the GPIO is present in DT as the function can return 0
if and only if it's present and it becomes in the global
number space 0. But this quite likely shows that the code
wasn't ever been tested on the systems when no GPIO is provided.
In any case, the proper test is just to call of_property_present()
without any attempts in requesting GPIO (as we haven't saved the
number or descriptor anywhere in the code).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240307121912.3676850-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240307114348.3643034-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
"PM runtime functions" was been added in sdhci-omap driver in commit
f433e8aac6 ("mmc: sdhci-omap: Implement PM runtime functions") along
with "card power off and enable aggressive PM" in commit 3edf588e7f
("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM").
Since then, the sdhci-omap driver doesn't work using mmc-hs200 mode
due to the tuning values being lost during a pm transition.
As for the sdhci_am654 driver, request a new tuning sequence before
suspend (sdhci_omap_runtime_suspend()), otherwise the device will
trigger cache flush error:
mmc1: cache flush error -110 (ETIMEDOUT)
mmc1: error -110 doing aggressive suspend
followed by I/O errors produced by fdisk -l /dev/mmcblk1boot1:
I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1
prio class 2
I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1
prio class 2
I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1
prio class 2
Buffer I/O error on dev mmcblk1boot1, logical block 8048, async page read
I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1
prio class 2
Buffer I/O error on dev mmcblk1boot0, logical block 8048, async page read
Don't re-tune if auto retuning is supported in HW (when SDHCI_TUNING_MODE_3
is available).
Link: https://lore.kernel.org/all/2e5f1997-564c-44e4-b357-6343e0dae7ab@smile.fr
Fixes: f433e8aac6 ("mmc: sdhci-omap: Implement PM runtime functions")
Signed-off-by: Romain Naour <romain.naour@skf.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240315234444.816978-1-romain.naour@smile.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used in
future to allow controllers to directly trigger SPI operations (eg, from
interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages.
- A big set of updates from Uwe Kleine-König moving drivers to use APIs
with more modern terminology for controllers.
- Major overhaul of the s3c64xx driver.
- Support for Google GS101 and Samsung Exynos850.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvHx0ACgkQJNaLcl1U
h9ATVQf/WafEp7ddJ23bRaHZx/gBCMgv8N6mN7OBnzB2pMIGL56SPf9fGAmCUQKt
mne6fDg6/RpydG/72TFppUjRFLN9CwoJjJfQIXMgOqYuPaMEnrj1wbcXar3MeeX2
8hS1u7wKwhOuuwLmoqqMOTKyGUj2mHsBOTOo0vm4WM1s9IHhY5TG2clYv1A+KZbj
kSHE5m7YnBLwimwu0+hsXnRNHZUGKVksQ/9t7AD7/7L8aPj9jPqu1EjTS1/6IDB0
QDVyW7Z6hX7YoUx48gp+j/UFJ7ZyxTajy+0wvzPHou3KJARgFfNZWT2XvvYcpA0/
yqcpbCUwZ1AETXHcmly7YwNpPV9LBg==
=+Xw/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmXu/nkXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnffw/+L4sj1IzK8vwK24/vQyk2W4Aw
V4Q6i3rmfxoWRIECsZNdfhBZxvRsDEhb5OZ/piFBrm1RtKdTqxnOp64mu8DayO2E
Fa9HyKoKRSY20WMr2YAuUp+Kx4gY33SqJCdq/SjqI/dY3QMWvj5uET8Z6GM+zago
YmD5d3ku4Te7r3ChJABxshbuMyaES4vOSHkW7jcEDEyOacXgBAGHjs8MkWVsNQsD
NMsD3CzF3VXaJhVW9r3eZMDEbhJoDFLuwplYVs2t8SyxjitHI7eBA91OtrG9TMkC
W7mvf4pXAYj6mU2wxuMKquqIEnLPjcXdqvym4kkqG7+D89nIe5w2iDcGMH33COi8
uW/PJ4t/slkMQL9InPkjLS3m1O5X9Y+doJTF/12HAk9oEI8s9JXNbpNxZYiGVLI0
EAG1bB+h6pW9wlyMWA2u6SIhe5TXStSAGrzDKBrWYt5IdKE4Qrn28tzWxpH2olks
r8XzQcNMqB7KWhvmO9hSr/F13Qs5472nzsF7lNMQAGp4G3qrehAtd4DJt3xl6KE7
A2G4nVh/gGBbBu4AWaMvw7l+Gdiqov9qvO1KGUZPJiH3zkjLwdz0u4PT3Fwha34P
NEaro18+/yovw5Tawgnc5TEsIwbGDT3ymkpIEqMAdcNTY8XIBp+ccd+65t2LSa2S
gP73V+Em1XGBKfvTI0k=
=ME/e
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Drop the use of BLK_BOUNCE_HIGH
- Fix partition switch for GP3
- Remove usage of the deprecated ida_simple API
MMC host:
- cqhci: Update bouncing email-addresses in MAINTAINERS
- davinci_mmc: Use sg_miter for PIO
- dw_mmc-hi3798cv200: Convert the DT bindings to YAML
- dw_mmc-hi3798mv200: Add driver for the new dw_mmc variant
- fsl-imx-esdhc: A couple of corrections/updates to the DT bindings
- meson-mx-sdhc: Drop use of the ->card_hw_reset() callback
- moxart-mmc: Use sg_miter for PIO
- moxart-mmc: Fix accounting for DMA transfers
- mvsdio: Use sg_miter for PIO
- mxcmmc: Use sg_miter for PIO
- omap: Use sg_miter for PIO
- renesas,sdhi: Add support for R-Car V4M variant
- sdhci-esdhc-mcf: Use sg_miter for swapping
- sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002 variants
- sh_mmcif: Use sg_miter for PIO
- tmio: Avoid concurrent runs of mmc_request_done()"
* tag 'mmc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (44 commits)
mmc: core: make mmc_host_class constant
mmc: core: Fix switch on gp3 partition
mmc: tmio: comment the ERR_PTR usage in this driver
mmc: mmc_spi: Don't mention DMA direction
mmc: dw_mmc: Remove unused of_gpio.h
mmc: dw_mmc: add support for hi3798mv200
dt-bindings: mmc: hisilicon,hi3798cv200-dw-mshc: add Hi3798MV200 binding
dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML
mmc: dw_mmc-hi3798cv200: remove MODULE_ALIAS()
mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()
mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function
mmc: tmio: avoid concurrent runs of mmc_request_done()
dt-bindings: mmc: fsl-imx-mmc: Document the required clocks
mmc: sh_mmcif: Advance sg_miter before reading blocks
mmc: sh_mmcif: sg_miter must not be atomic
mmc: sdhci-esdhc-mcf: Flag the sg_miter as atomic
dt-bindings: mmc: fsl-imx-esdhc: add default and 100mhz state
mmc: core: constify the struct device_type usage
mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo CV1800B and SG2002 support
...
Commit e519f0bb64 ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
moved Nokia N810 MMC power up/down from the board file into the MMC driver.
The change removed some delays, and ordering without a valid reason.
Restore power up/down to match the original code. This matters only on N810
where the 2nd GPIO is in use. Other boards will see an additional delay but
that should be a lesser concern than omitting delays altogether.
Fixes: e519f0bb64 ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Message-ID: <20240223181439.1099750-6-aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
After a deferred probe, GPIO descriptor lookup will fail with EBUSY. Fix by
using managed descriptors.
Fixes: e519f0bb64 ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Message-ID: <20240223181439.1099750-5-aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The lookup is done before host->dev is initialized. It will always just
fail silently, and the MMC behaviour is totally unpredictable as the switch
is left in an undefined state. Fix that.
Fixes: e519f0bb64 ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Message-ID: <20240223181439.1099750-4-aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the mmc_host_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-mmc-v1-1-4a66e7122ff3@marliere.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit e7794c14fd ("mmc: rpmb: fixes pause retune on all RPMB
partitions.") added a mask check for 'part_type', but the mask used was
wrong leading to the code intended for rpmb also being executed for GP3.
On some MMCs (but not all) this would make gp3 partition inaccessible:
armadillo:~# head -c 1 < /dev/mmcblk2gp3
head: standard input: I/O error
armadillo:~# dmesg -c
[ 422.976583] mmc2: running CQE recovery
[ 423.058182] mmc2: running CQE recovery
[ 423.137607] mmc2: running CQE recovery
[ 423.137802] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[ 423.237125] mmc2: running CQE recovery
[ 423.318206] mmc2: running CQE recovery
[ 423.397680] mmc2: running CQE recovery
[ 423.397837] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 423.408287] Buffer I/O error on dev mmcblk2gp3, logical block 0, async page read
the part_type values of interest here are defined as follow:
main 0
boot0 1
boot1 2
rpmb 3
gp0 4
gp1 5
gp2 6
gp3 7
so mask with EXT_CSD_PART_CONFIG_ACC_MASK (7) to correctly identify rpmb
Fixes: e7794c14fd ("mmc: rpmb: fixes pause retune on all RPMB partitions.")
Cc: stable@vger.kernel.org
Cc: Jorge Ramirez-Ortiz <jorge@foundries.io>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240306-mmc-partswitch-v1-1-bf116985d950@codewreck.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since driver doesn't handle any DMA requests, drop any use of DMA bits,
such as DMA direction. Instead, use MMC_DATA_WRITE flag directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304184830.1319526-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240304175606.1200076-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Parsing dt usually happens very early, sometimes even before the struct
mmc_host has been allocated (e.g. dw_mci_probe() and dw_mci_parse_dt() in
dw_mmc.c). Looking at the source of mmc_of_parse_clk_phase(), it's actually
not needed to have an initialized mmc_host, let's therefore pass a struct
device* to it instead.
Also update the only current user, sdhci-of-aspeed.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-1-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This looks strange to call release_mem_region() in a remove function
without any request_mem_region() in the probe or "struct resource"
somewhere.
So remove the corresponding code.
Fixes: 3a96dff0f8 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With the to-be-fixed commit, the reset_work handler cleared 'host->mrq'
outside of the spinlock protected critical section. That leaves a small
race window during execution of 'tmio_mmc_reset()' where the done_work
handler could grab a pointer to the now invalid 'host->mrq'. Both would
use it to call mmc_request_done() causing problems (see link below).
However, 'host->mrq' cannot simply be cleared earlier inside the
critical section. That would allow new mrqs to come in asynchronously
while the actual reset of the controller still needs to be done. So,
like 'tmio_mmc_set_ios()', an ERR_PTR is used to prevent new mrqs from
coming in but still avoiding concurrency between work handlers.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Closes: https://lore.kernel.org/all/20240220061356.3001761-1-dirk.behme@de.bosch.com/
Fixes: df3ef2d3c9 ("mmc: protect the tmio_mmc driver against a theoretical race")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Cc: stable@vger.kernel.org # 3.0+
Link: https://lore.kernel.org/r/20240305104423.3177-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
AC5X spec says PHY init complete bit must be polled until zero.
We see cases in which timeout can take longer than the standard
calculation on AC5X, which is expected following the spec comment above.
According to the spec, we must wait as long as it takes for that bit to
toggle on AC5X.
Cap that with 100 delay loops so we won't get stuck forever.
Fixes: 06c8b667ff ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Each time SD/mmc phy is initialized, at times, in some of
the attempts, phy fails to completes its initialization
which results into timeout error. Per the HW spec, it is
a pre-requisite to ensure a stable SD clock before a phy
initialization is attempted.
Fixes: 06c8b667ff ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The introduction of sg_miter was a bit sloppy as it didn't
exactly mimic the semantics of the old code on multiblock reads
and writes: these like you to:
- Advance to the first sglist entry *before* starting to read
any blocks from the card.
- Advance and check availability of the next entry *right after*
processing one block.
Not checking if we have more sglist entries right after
reading a block will lead to this not being checked until we
return to the callback to read out more blocks, i.e. until the
next interrupt arrives. Since the last block is the last one
(no more data will arrive) there will not be a next interrupt,
and we will be waiting forever resulting in a timeout for
command 18 when reading multiple blocks.
The same bug was fixed also in the writing of multiple blocks.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 27b57277d9 ("mmc: sh_mmcif: Use sg_miter for PIO")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240221-fix-sh-mmcif-v2-2-5e521eb25ae4@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
All the sglist iterations happen in the *threaded* interrupt handler and
that context is not atomic, so don't request an atomic sglist miter. Using
an atomic miter results in "BUG: scheduling while atomic" splats.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 27b57277d9 ("mmc: sh_mmcif: Use sg_miter for PIO")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240221-fix-sh-mmcif-v2-1-5e521eb25ae4@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The sg_miter used to loop over the returned sglist from a
transfer in the esdhc subdriver for SDHCI can be called
from atomic context so the miter needs to be atomic.
sdhci_request_done() is always called from process context,
either as a work or as part of the threaded interrupt handler,
but the one case when we are actually calling .request_done()
from an atomic context is in sdhci_irq().
Fix this by flagging the miter atomic so we always use
kmap_atomic().
Fixes: e8a167b848 ("mmc: sdhci-esdhc-mcf: Use sg_miter for swapping")
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240228-fix-sdhci-esdhc-mcf-2-v2-1-4ebb3fd691ea@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the sdio_type,
sd_type and mmc_type variables to be constant structures as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240219-device_cleanup-mmc-v1-1-1910e283cf5a@marliere.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the mmc controller in the Sophgo CV1800B and SG2002
with corresponding new compatible strings. Implement custom sdhci_ops.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20240217144202.3808-3-jszhang@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 32f18e5961 ("mmc: improve API to make clear hw_reset callback
is for cards") made it clear that the hw_reset callback is intended for
resetting the card. Remove the .card_hw_reset callback from the
meson-mx-sdhc-mmc driver because it's purpose is to reset the SDHC
controller (FIFOs, PHY, DMA interface, ...).
While here also rename and change the argument of meson_mx_sdhc_hw_reset
so it cannot be called by accident as a replacement for card_hw_reset in
the future.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240217100200.1494980-3-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that devm_clk_hw_get_clk() has been available for a while we can
resolve an older TODO where this API did not exist yet. No functional
changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240217100200.1494980-2-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pass the queue limit set at initialization time directly to
blk_mq_alloc_disk instead of updating it right after the allocation.
This requires refactoring the code a bit so that what was mmc_setup_queue
before also allocates the gendisk now and actually sets all limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240215070300.2200308-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:
DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320
DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.
If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 46b723dd86 ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Initializing an eMMC that's connected via a 1-bit bus is current failing,
if the HW (DT) informs that 4-bit bus is supported. In fact this is a
regression, as we were earlier capable of falling back to 1-bit mode, when
switching to 4/8-bit bus failed. Therefore, let's restore the behaviour.
Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin)
Before patch:
[134509.044225] mmc0: switch to bus width 4 failed
[134509.044509] mmc0: new high speed MMC card at address 0001
[134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134509.281602] mmc0: switch to bus width 4 failed
[134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284609] ldm_validate_partition_table(): Disk read failed.
[134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289553] mmcblk0: unable to read partition table
[134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
[134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read
After patch:
[134551.089613] mmc0: switch to bus width 4 failed
[134551.090377] mmc0: new high speed MMC card at address 0001
[134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
[134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
Fixes: 577fb13199 ("mmc: rework selection of bus speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Semenov <ivan@semenov.dev>
Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use existing typedef for dma_filter_fn to avoid duplicating type
definition.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240208202137.630281-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pass a queue_limits to blk_mq_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable id is being initialized with a value that is never
read, it is being re-assigned later on. The initialization is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/mmc/host/wbsd.c:1287:4: warning: Value stored to 'id'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240205191310.1848561-1-colin.i.king@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use the scatterlist memory iterator instead of just
dereferencing virtual memory using sg_virt().
This make highmem references work properly.
This driver also has a bug in the PIO sglist handling that
is fixed as part of the patch: it does not travers the
list of scatterbuffers: it will just process the first
item in the list. This is fixed by augmenting the logic
such that we do not process more than one sgitem
per IRQ instead of counting down potentially the whole
length of the request.
We can suspect that the PIO path is quite untested.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-mmc/20240122073423.GA25859@lst.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-5-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The whole scatterlist chain is submitted to the DMA engine,
but the code is written to just account for the length of
the first sg entry.
When the DMA transfer is finished, all the data in the
request has been transferred, account for this instead.
This only works because the moxart_request() function isn't
checking that all data was transferred and will
unconditionally issue mmc_request_done() after returning
successfully from moxart_transfer_dma().
Keep the assignment of accounted bytes in .bytes_xfered
but move it after the completion where we know it has
actually happened.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240127-mmc-proper-kmap-v2-3-d8e732aa97d1@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Torvalds
Andy Shevchenko
Ulf Hansson
Jisheng Zhang
Krzysztof Kozlowski
Hans de Goede
Adrian Hunter
Sergei Antonov
Arnd Bergmann
Maksim Kiselev
Dhruva Gole
Krzysztof Kozlowski
Bjorn Helgaas
Rouven Czerwinski
Mantas Pucka
Uwe Kleine-König
Sergey Khimich
Judith Mendez
Li Zhijian
Muhammad Usama Anjum
Liming Sun
Romain Naour
Mikko Rapeli
Aaro Koskinen
Ricardo B. Marliere
Dominique Martinet
Wolfram Sang
Yang Xiwen
Christophe JAILLET
Elad Nachman
Linus Walleij
Martin Blumenstingl
Christoph Hellwig
Christophe Kerello
Ivan Semenov
Colin Ian King