mirror of https://github.com/torvalds/linux.git
36 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
|
Mete Durlu
|
df7e714d6d |
s390/diag: Diag204 add busy return errno
When diag204-busy-indication facility is installed, diag204 can return '8' which means device is busy and no operation is done. Add check for return codes of diag204 call. Return error codes according to diag204 return codes. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Mete Durlu
|
bb9be93acb |
s390/diag: Return errno's from diag204
Return different errno's from diag204 to allow users to handle them accordingly. Instead of returning -1 regardless of the failing condition, return -EINVAL on invalid memory address and -EOPNOTSUPP when diag instruction fails. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
Ilya Leoshkevich
|
1f4cf63979 |
s390/diag: unpoison diag224() output buffer
Diagnose 224 stores 4k bytes, which currently cannot be deduced from the inline assembly constraints. This leads to KMSAN false positives. Fix the constraints by using a 4k-sized struct instead of a raw pointer. While at it, prettify them too. Link: https://lkml.kernel.org/r/20240621113706.315500-29-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Thomas Richter
|
eec561024b |
s390/diag: add missing virt_to_phys() translation to diag14()
diag14() is currently only used by the vmur device driver. The third parameter, called subcommand, determines the type of the first parameter. For some subcommands the value of the first parameter is an address to a memory buffer and needs virtual to physical address conversion. Other subcommands interpret the first parameter is an integer. This doesn't fix a bug since virtual and physical addresses are currently the same. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
Heiko Carstens
|
e98eda926b |
s390/hypfs_diag0c: fix virtual vs physical address confusion
Add missing virt_to_phys() translation to diag0c(). This doesn't fix a bug since virtual and physical addresses are currently the same. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
Alexander Gordeev
|
d8132003f8 |
s390/diag: fix diag26c() physical vs virtual address confusion
Fix virtual vs physical address confusion (which currently are the same). Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
|
Heiko Carstens
|
c8b5d574fc |
s390/diag: add missing virt_to_phys() translation to diag224()
Diagnose 224 expects a physical address, but all users pass a virtual address. Translate the address to fix this. Reported-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Heiko Carstens
|
e810487385 |
s390/diag: fix diagnose 8c description
The comment above diag8c() describes diagnose 210, not diagnose 8c. Add a proper short description. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
|
Heiko Carstens
|
83f9567194 |
s390/hypfs: simplify memory allocation
Simplify memory allocation for diagnose 204 memory buffer: - allocate with __vmalloc_node() to enure page alignment - allocate real / physical memory area also within vmalloc area and handle vmalloc to real / physical address translation within diag204(). Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
|
Heiko Carstens
|
c83cd4fe31 |
s390/diag: handle diag 204 subcode 4 address correctly
Diagnose 204 subcode 4 requires a real (physical) address, but a virtual address is passed to the inline assembly. Convert the address to a physical address for only this specific case. Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
Anastasia Eskova
|
8cf57d7217 |
s390: add support for user-defined certificates
Enable receiving the user-defined certificates from the s390x
hypervisor via new diagnose 0x320 calls, and make them available to the
Linux root user as 'cert_store_key' type keys in a so-called
'cert_store' keyring.
New user-space interfaces:
/sys/firmware/cert_store/refresh
Writing to this attribute re-fetches certificates via DIAG 0x320
/sys/firmware/cert_store/cs_status
Reading from this attribute returns either of:
"uninitialized"
If no certificate has been retrieved yet
"ok"
If certificates have been successfully retrieved
"failed (<number>)"
If certificate retrieval failed with reason code <number>
New debug trace areas:
/sys/kernel/debug/s390dbf/cert_store_msg
/sys/kernel/debug/s390dbf/cert_store_hexdump
Usage example:
To initiate request for certificates available to the system as root:
$ echo 1 > /sys/firmware/cert_store/refresh
Upon success the '/sys/firmware/cert_store/cs_status' contains
the value 'ok'.
$ cat /sys/firmware/cert_store/cs_status
ok
Get the ID of the keyring 'cert_store':
$ keyctl search @us keyring cert_store
OR
$ keyctl link @us @s; keyctl request keyring cert_store
Obtain list of IDs of certificates:
$ keyctl rlist <cert_store keyring ID>
Display certificate content as hex-dump:
$ keyctl read <certificate ID>
Read certificate contents as binary data:
$ keyctl pipe <certificate ID> >cert_data
Display certificate description:
$ keyctl describe <certificate ID>
The certificate description has the following format:
<64 bytes certificate name in EBCDIC> ':'
<certificate index as obtained from hypervisor> ':'
<certificate store token obtained from hypervisor>
The certificate description in /proc/keys has certificate name
represented in ASCII.
Users can read but cannot update the content of the certificate.
Signed-off-by: Anastasia Eskova <anastasia.eskova@ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
|
Heiko Carstens
|
18e5cb7a5c |
s390/diag: make __diag8c_tmp_amode31 static
Get rid of this sparse warning:
arch/s390/kernel/diag.c:69:29: warning: symbol '__diag8c_tmp_amode31' was not declared. Should it be static?
Fixes:
|
|
Sven Schnelle
|
fbaee7464f |
s390/tty3270: add support for diag 8c
The current code uses diag210 to infer the 3270 geometry from the model number when running on z/VM. This doesn't work well as almost all 3270 software clients report as 3279-2 with a custom resolution. tty3270 assumes it has a 80x24 terminal connected because of the -2 suffix. Use diag 8c to fetch the realy geometry from z/VM. Note that this doesn't allow dynamic resizing, i.e. reconnecting to a z/VM session with a different geometry. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
|
Heiko Carstens
|
d09a307fde |
s390/extable: move EX_TABLE define to asm-extable.h
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h which is a lot less generic than the current linkage.h. Also make sure that all files which contain EX_TABLE usages actually include the new header file. This should make sure that the files always compile and there won't be any random compile breakage due to other header file dependencies. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Heiko Carstens
|
c78d0c7484 |
s390: rename dma section to amode31
The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
Sebastian Andrzej Siewior
|
a73de29320 |
s390: replace deprecated CPU-hotplug functions
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20210803141621.780504-5-bigeasy@linutronix.de Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
Alexander Egorenkov
|
6bda667037 |
s390/boot: move dma sections from decompressor to decompressed kernel
This change simplifies the task of making the decompressor relocatable.
The decompressor's image contains special DMA sections between _sdma and
_edma. This DMA segment is loaded at boot as part of the decompressor and
then simply handed over to the decompressed kernel. The decompressor itself
never uses it in any way. The primary reason for this is the need to keep
the aforementioned DMA segment below 2GB which is required by architecture,
and because the decompressor is always loaded at a fixed low physical
address, it is guaranteed that the DMA region will not cross the 2GB
memory limit. If the DMA region had been placed in the decompressed kernel,
then KASLR would make this guarantee impossible to fulfill or it would
be restricted to the first 2GB of memory address space.
This commit moves all DMA sections between _sdma and _edma from
the decompressor's image to the decompressed kernel's image. The complete
DMA region is placed in the init section of the decompressed kernel and
immediately relocated below 2GB at start-up before it is needed by other
parts of the decompressed kernel. The relocation of the DMA region happens
even if the decompressed kernel is already located below 2GB in order
to keep the first implementation simple. The relocation should not have
any noticeable impact on boot time because the DMA segment is only a couple
of pages.
After relocating the DMA sections, the kernel has to fix all references
which point into it. In order to automate this, place all variables
pointing into the DMA sections in a special .dma.refs section. All such
variables must be defined using the new __dma_ref macro. Only variables
containing addresses within the DMA sections must be placed in the new
.dma.refs section.
Furthermore, move the initialization of control registers from
the decompressor to the decompressed kernel because some control registers
reference tables that must be placed in the DMA data section to
guarantee that their addresses are below 2G. Because the decompressed
kernel relocates the DMA sections at startup, the content of control
registers CR2, CR5 and CR15 must be updated with new addresses after
the relocation. The decompressed kernel initializes all control registers
early at boot and then updates the content of CR2, CR5 and CR15
as soon as the DMA relocation has occurred. This practically reverts
the commit
|
|
|
Heiko Carstens
|
3c45a07bee |
s390/diag: use register pair instead of register asm
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
Liu Shixin
|
61f2e77489 |
s390/diag: convert to use DEFINE_SEQ_ATTRIBUTE macro
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
Philipp Rudo
|
8ebf6da9db |
s390/ftrace: fix potential crashes when switching tracers
Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: |
|
Michael Mueller
|
6c7c851f1b |
s390/diag: fix display of diagnose call statistics
Show the full diag statistic table and not just parts of it.
The issue surfaced in a KVM guest with a number of vcpus
defined smaller than NR_DIAG_STAT.
Fixes:
|
|
Gerald Schaefer
|
a80313ff91 |
s390/kernel: introduce .dma sections
With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
|
Collin Walling
|
4ad78b8651 |
s390/setup: set control program code via diag 318
The s390x diagnose 318 instruction sets the control program name code (CPNC) and control program version code (CPVC) to provide useful information regarding the OS during debugging. The CPNC is explicitly set to 4 to indicate a Linux/KVM environment. The CPVC is a 7-byte value containing: - 3-byte Linux version code, currently set to 0 - 3-byte unique value, currently set to 0 - 1-byte trailing null Signed-off-by: Collin Walling <walling@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <1544135405-22385-2-git-send-email-walling@linux.ibm.com> [set version code to 0 until the structure is fully defined] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
Julian Wiedmann
|
1b03047816 |
s390/diag: add diag26c support
Implement support for the hypervisor diagnose 0x26c
('Access Certain System Information').
It passes a request buffer and a subfunction code, and receives
a response buffer and a return code.
Also add the scaffolding for the 'MAC Services' subfunction.
It may be used by network devices to obtain a hypervisor-managed
MAC address.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paul Gortmaker
|
3994a52b54 |
s390: kernel: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each change instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
|
|
Linus Torvalds
|
221bb8a46e |
- ARM: GICv3 ITS emulation and various fixes. Removal of the old
VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. The ugly bit is the conflicts. A couple of them are simple conflicts due to 4.7 fixes, but most of them are with other trees. There was definitely too much reliance on Acked-by here. Some conflicts are for KVM patches where _I_ gave my Acked-by, but the worst are for this pull request's patches that touch files outside arch/*/kvm. KVM submaintainers should probably learn to synchronize better with arch maintainers, with the latter providing topic branches whenever possible instead of Acked-by. This is what we do with arch/x86. And I should learn to refuse pull requests when linux-next sends scary signals, even if that means that submaintainers have to rebase their branches. Anyhow, here's the list: - arch/x86/kvm/vmx.c: handle_pcommit and EXIT_REASON_PCOMMIT was removed by the nvdimm tree. This tree adds handle_preemption_timer and EXIT_REASON_PREEMPTION_TIMER at the same place. In general all mentions of pcommit have to go. There is also a conflict between a stable fix and this patch, where the stable fix removed the vmx_create_pml_buffer function and its call. - virt/kvm/kvm_main.c: kvm_cpu_notifier was removed by the hotplug tree. This tree adds kvm_io_bus_get_dev at the same place. - virt/kvm/arm/vgic.c: a few final bugfixes went into 4.7 before the file was completely removed for 4.8. - include/linux/irqchip/arm-gic-v3.h: this one is entirely our fault; this is a change that should have gone in through the irqchip tree and pulled by kvm-arm. I think I would have rejected this kvm-arm pull request. The KVM version is the right one, except that it lacks GITS_BASER_PAGES_SHIFT. - arch/powerpc: what a mess. For the idle_book3s.S conflict, the KVM tree is the right one; everything else is trivial. In this case I am not quite sure what went wrong. The commit that is causing the mess ( |
|
Janosch Frank
|
022bd2d11c |
s390: Make diag224 public
Diag204's cpu structures only contain the cpu type by means of an index in the diag224 name table. Hence, to be able to use diag204 in any meaningful way, we also need a usable diag224 interface. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> |
|
|
Janosch Frank
|
e65f30e0cb |
s390: hypfs: Move diag implementation and data definitions
Diag 204 data and function definitions currently live in the hypfs
files. As KVM will be a consumer of this data, we need to make it
publicly available and move it to the appropriate diag.{c,h} files.
__attribute__ ((packed)) occurences were replaced with __packed for
all moved structs.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Martin Schwidefsky
|
230ccb370f |
s390/diag: add a s390 prefix to the diagnose trace point
Documentation/trace/tracepoints.txt states that the naming scheme for tracepoints is "subsys_event" to avoid collisions. Rename the 'diagnose' tracepoint to 's390_diagnose'. Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
|
|
Martin Schwidefsky
|
b5a6b71b19 |
s390/diag: add tracepoint for diagnose calls
To be able to analyse problems in regard to hypervisor overhead
add a tracepoing for diagnose calls. It reports the number of
the diagnose issued, e.g.
sshd-1385 [002] .... 42.701431: diagnose: nr=0x9c
<idle>-0 [001] ..s. 43.587528: diagnose: nr=0x9c
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
|
Martin Schwidefsky
|
1ec2772e0c |
s390/diag: add a statistic for diagnose calls
Introduce /sys/debug/kernel/diag_stat with a statistic how many diagnose calls have been done by each CPU in the system. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
|
Heiko Carstens
|
5a79859ae0 |
s390: remove 31 bit support
Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.
The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes:
|
|
Michael Holzheu
|
83ace2701b |
[S390] replace diag10() with diag10_range() function
Currently the diag10() function can only release one page. For exploiters that have to call diag10 on a contiguous memory region this is suboptimal. This patch replaces the diag10() function with diag10_range() that is able to release multiple pages. In addition to that the new function now allows to release memory with addresses higher than 2047 MiB. This was due to a restriction of the diagnose implementation under z/VM prior to release 5.2. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
|
Michael Holzheu
|
0a87c5cfc0 |
[S390] vmur: fix diag14 exceptions with addresses > 2GB.
There are several s390 diagnose calls, which must be executed below the 2GB memory boundary. In order to enforce this, those diagnoses must be compiled into the kernel. Currently diag 14 can be called within the vmur kernel module from addresses above 2GB. This leads to specification exceptions. This patch moves diag10, diag14 and diag210 into the new diag.c file. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> |