On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.
When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.
To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.
Fixes: 7875afafba ("drm/amd/display: Fix brightness level not retained over reboot")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a490c8d77d)
Cc: stable@vger.kernel.org
[Why&How]
As reported on https://gitlab.freedesktop.org/drm/amd/-/issues/3936,
SMU hang can occur if the interrupts are not enabled appropriately,
causing a vblank timeout.
This patch reverts commit 5009628d85 ("drm/amd/display: Remove unnecessary
amdgpu_irq_get/put"), but only for RX6xxx & RX7700 GPUs, on which the
issue was observed.
This will re-enable interrupts regardless of whether the user space needed
it or not.
Fixes: 5009628d85 ("drm/amd/display: Remove unnecessary amdgpu_irq_get/put")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3936
Suggested-by: Sun peng Li <sunpeng.li@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 95d168b367)
Cc: stable@vger.kernel.org
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter
registered resulting in a null pointer dereference when applications try
to access the invalid device.
Fixes: 3d5470c973 ("drm/amd/display/dm: add support for OEM i2c bus")
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 89923fb7ea)
Cc: stable@vger.kernel.org
[Why]
dm_prepare_suspend() was added in commit 50e0bae34f
("drm/amd/display: Add and use new dm_prepare_suspend() callback")
to allow display to turn off earlier in the suspend sequence.
This caused a regression that HDMI audio sometimes didn't work
properly after resume unless audio was playing during suspend.
[How]
Drop dm_prepare_suspend() callback. All code in it will still run
during dm_suspend(). Also drop unnecessary dm_complete() callback.
dm_complete() was used for failed prepare and also for any case
of successful resume. The code in it already runs in dm_resume().
This change will introduce more time that the display is turned on
during suspend sequence. The compositor can turn it off sooner if
desired.
Cc: Harry Wentland <harry.wentland@amd.com>
Reported-by: Przemysław Kopa <prz.kopa@gmail.com>
Closes: https://lore.kernel.org/amd-gfx/1cea0d56-7739-4ad9-bf8e-c9330faea2bb@kernel.org/T/#m383d9c08397043a271b36c32b64bb80e524e4b0f
Reported-by: Kalvin <hikaph+oss@gmail.com>
Closes: https://github.com/alsa-project/alsa-lib/issues/465
Closes: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4809
Fixes: 50e0bae34f ("drm/amd/display: Add and use new dm_prepare_suspend() callback")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2fd653b9bb)
Cc: stable@vger.kernel.org
[Why]
Although compositors will add their own modes, Xorg won't use it's own
modes and will only stick to modes advertised by the driver. This mean a
user that used to pick 1024x768 could no longer access it unless the
panel's native resolution was 1024x768.
[How]
Revert commit 6d396e7ac1 ("drm/amd/display: Disable common modes for
LVDS") and commit 7948afb46a ("drm/amd/display: Disable common modes
for eDP").
The panel will still use scaling for any non-native modes due to
commit 978fa2f6d0 ("drm/amd/display: Use scaling for non-native
resolutions on eDP")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250828140856.2887993-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c2fbf72fe3)
[WHY]
Although unlikely drm_atomic_get_new_connector_state() or
drm_atomic_get_old_connector_state() can return NULL.
[HOW]
Check returns before dereference.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e5e8d672f)
Cc: stable@vger.kernel.org
[Why]
If a GPU is in reset and the hardware fails to initialize the rest of the
resume sequence shouldn't be run.
[How]
Pass error code up to caller of dm_resume().
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
If amdgpu_dm failed to initalize before amdgpu_dm_initialize_drm_device()
completed then freeing atomic_obj will lead to list corruption.
[How]
Check if atomic_obj state is initialized before trying to free.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DIV_ROUND_CLOSEST(x, 100) returns either 0 or 1 if 0<x<=100, so the
division needs to be performed after the multiplication and not the
other way around, to properly scale the value.
Fixes: 8b5f3a229a ("drm/amd/display: Fix default DC and AC levels")
Signed-off-by: Lauri Tirkkonen <lauri@hacktheplanet.fi>
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/aH2Q_HJvxKbW74vU@hacktheplanet.fi
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Common resolutions are added to supported modes to enable compatibility
scenarios that compositors may use to do things like clone displays. There
is no guarantee however that the panel will natively support these modes.
[How]
If the compositor hasn't enabled scaling but a non-native resolution has
been picked for an LVDS panel turn the scaler on anyway. This will ensure
compatibility.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Common modes are added to LVDS for compatibility in clone mode, but
not all panels support them. Non-native modes were disabled in the past
but this caused problems because compositors didn't use scaling for non
native modes. Now non-native modes on LVDS will enable the scaler by
default.
[How]
Check the connector type. If the connector is LVDS avoid adding common
modes.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OLED panels can be fully off, but this behavior is unexpected.
[How]
Ensure that minimum luminance is at least 1.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4338
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Brightness programming may involve a conversion of a user requested
brightness against what was in a custom brightness curve. The values
might not match what a user programmed.
[How]
Add a new trace event to show specific converted brightness values.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250623171114.1156451-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
commit 16dc8bc27c ("drm/amd/display: Export full brightness range to
userspace") adjusted the brightness range to scale to larger values, but
missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that
scaling works properly with custom brightness curves.
[How]
As the change for max brightness of 0xFFFF only applies to devices
supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL.
Fixes: 16dc8bc27c ("drm/amd/display: Export full brightness range to userspace")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is normal to prune resolutions that exceed hw or bw limitation.
Use error oriented wordings could cause misunderstanding.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Common modes are added to eDP for compatibility in clone mode, but
not all panels support them. Non-native modes were disabled in the past
but this caused problems because compositors didn't use scaling for non
native modes. Now non-native modes on eDP will enable the scaler by
default.
[How]
Check the connector type. If the connector is eDP avoid adding common
modes.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Common resolutions are added to supported modes to enable compatibility
scenarios that compositors may use to do things like clone displays. There
is no guarantee however that the panel will natively support these modes.
[How]
If the compositor hasn't enabled scaling but a non-native resolution has
been picked for an eDP panel turn the scaler on anyway. This will ensure
compatibility.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the suspend sequence has been aborted after prepare() but
before suspend() the resume() callback never gets called. The PM core
will call complete() when this happens. As the state has been cached
in prepare() it needs to be destroyed in complete() if it's still around.
[How]
Create a helper for destroying cached state and call it both in resume()
and complete() callbacks. If resume has been called the state will be
destroyed and it's a no-op for complete(). If resume hasn't been called
(such as an aborted suspend) then destroy the state in complete().
Fixes: 50e0bae34f ("drm/amd/display: Add and use new dm_prepare_suspend() callback")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250602014432.3538345-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If drm_atomic_helper_suspend() has failed for any reason, it's stored
in adev->dm.cached_state. This isn't expected because the resume
(or complete()) sequence will attempt to use the stored state to
resume.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250602014432.3538345-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Userspace currently is offered a range from 0-0xFF but the PWM is
programmed from 0-0xFFFF. This can be limiting to some software
that wants to apply greater granularity.
[HOW]
Convert internally to firmware values only when mapping custom
brightness curves because these are in 0-0xFF range. Advertise full
PWM range to userspace.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Backlight caps are read already in amdgpu_dm_update_backlight_caps().
They may be updated by update_connector_ext_caps(). Reading again when
registering backlight device may cause wrong values to be used.
[HOW]
Use backlight caps already registered to the dm.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dml2_soc_bb struct can continuously receive updates for future ASICs.
Alignment issues may arise since VBIOS DMCUB contains an older version of
the SOC BB.
Populating the bounding box with values from DMCUB is no longer necessary
since values such as UCLK will be overridden by values acquired by PMFW
anyways.
[HOW]
Use bb_from_dmub to store DCN specific bounding box parameters in DMCUB.
Add helpers to translate DCN specific struct to the corresponding
dml2_soc_bb field.
To avoid alignment issues:
Deprecate applying DMCUB SoC BB for DCN4
For future projects:
Create a flattened struct containing all sensitive parameters in the
bounding box. New parameters can be added to the bottom of the new struct
as needed.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The boolean fast_validate is used as an
input parameter in multiple functions. To
support more scenarios, we are
replacing it with enum dc_validate_mode.
[How]
The enum dc_validate_mode introduces three
possible values:
1) DC_VALIDATE_MODE_AND_PROGRAMMING:
Apply the mode to hardware
2) DC_VALIDATE_MODE_ONLY:
Check whether the mode can be supported
3) DC_VALIDATE_MODE_AND_STATE_INDEX:
Check if the mode can be supported, and
determine the optimal voltage level
needed to support it.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yan Li <yan.li@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The `drm_*()` print macros will handle including the driver in the print
already. The extra print of the word `amdgpu` is unnecessary.
[How]
Modify all prints to drop `amdgpu: `.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The quantity and duration of FAMS2 commands are set to increase
in future products. This necessitates the implementation of a new
mechanism for chaining commands together, allowing all commands
to be processed within a single transaction.
[How]
The indirect buffer acts as a shared buffer on the driver side,
mapped to DMUB's internal CW7 address. Its source address and
size are sent through mailbox command to DMUB, triggering the
transaction.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC and AC levels are advertised in a percentage, not a luminance.
[How]
Scale DC and AC levels to supported values.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4221
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Default BIOS brightness caps are buried in ACPI.
[How]
Add extra dynamic debug that can show default brightness caps.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FAMS is the successor to SubVP starting with DCN4x. Reuse the same
debug option to disable FAMS for debugging purposes.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit cfb2d41831 since it
causes regressions on certain configs. Revert until the issue can be
isolated and debugged.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4238
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
commit 68bfdc8dc0 ("drm/amd: Keep display off while going into S4")
attempted to keep displays off during the S4 sequence by not resuming
display IP. This however leads to hangs because DRM clients such as the
console can try to access registers and cause a hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4155
Fixes: 68bfdc8dc0 ("drm/amd: Keep display off while going into S4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522141328.115095-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under specific embedded scenarios, we might still use DP interface
rather than eDP interface. Under such case, detection link training
is unnecessary.
Add a new dcdebugmask value that can be used to skip the detection LT
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Link: https://lore.kernel.org/amd-gfx/20250521063934.2111323-1-Wayne.Lin@amd.com/
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's unnecessary to set operation_result as invalid reply when
p_notify->result != AUX_RET_SUCCESS.
[How]
Set operation_result as p_notify->result to better understand
the reason for the error
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMI quirks are relatively big code that makes amdgpu_dm 200 lines
larger.
[How]
Move DMI quirks into a dedicated source file and make all quirks
variables for `struct amdgpu_display_manager`.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Instead of dropping DRR updates, defer them. This fixes issues where
monitor continues to see incorrect refresh rate after VRR was turned off
by userspace.
Fixes: 32953485c5 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: John Olender <john.olender@gmail.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Now forcing aux->transfer to return 0 when incomplete AUX write is
inappropriate. It should return bytes have been transferred.
[How]
aux->transfer is asked not to change original msg except reply field of
drm_dp_aux_msg structure. Copy the msg->buffer when it's write request,
and overwrite the first byte when sink reply 1 byte indicating partially
written byte number. Then we can return the correct value without
changing the original msg.
Fixes: 3637e457eb ("drm/amd/display: Fix wrong handling for AUX_DEFER case")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace all use of DRM_DEBUG_DRIVER in amdgpu_dm.c with
drm_dbg_driver(). The latter prints the instance of the drm device
associated with the error which would helpful in debugging scenarios
involving multiple GPUs
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() should return all exact data
reply from the sink side. Don't do the analysis job in it.
[How]
Remove unnecessary check condition AUX_TRANSACTION_REPLY_AUX_ACK.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
"Request length != reply length" is expected behavior defined in spec.
It's not an invalid reply. Besides, replied data handling logic is not
designed to be written in amdgpu_dm_process_dmub_aux_transfer_sync().
Remove the incorrectly handling section.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix the checking condition for detecting AUX_RET_ERROR_PROTOCOL_ERROR.
It was wrongly checking by "not equals to"
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Defined value of dmub AUX reply command field get updated but didn't
adjust dm receiving side accordingly.
[How]
Check the received reply command value to see if it's updated version
or not. Adjust it if necessary.
Fixes: ead08b95fa ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FAMS2 expects vmin/vmax to be updated in the case when freesync is
off, but supported. But we only update it when freesync is enabled.
[How]
Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called
irrespective of whether freesync is enabled. If freesync is supported,
then there is no harm in updating vmin/vmax registers.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The null check for connector was dereferenced previously in the same
function and the caller.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain config, a modeprobe test triggers too many instances of the
error related to infoframe. Make it print only once, and also make it a
warning.
Fixes: 6027cbee19 ("drm/amd/display: Add error check for avi and vendor infoframe setup function")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Chengjun Yao <Chengjun.Yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added checks for NULL values after retrieving drm_new_conn_state
to prevent dereferencing NULL pointers.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10751 dm_update_crtc_state()
warn: 'drm_new_conn_state' can also be NULL
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c
10672 static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
10673 struct drm_atomic_state *state,
10674 struct drm_crtc *crtc,
10675 struct drm_crtc_state *old_crtc_state,
10676 struct drm_crtc_state *new_crtc_state,
10677 bool enable,
10678 bool *lock_and_validation_needed)
10679 {
10680 struct dm_atomic_state *dm_state = NULL;
10681 struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state;
10682 struct dc_stream_state *new_stream;
10683 int ret = 0;
10684
...
10703
10704 /* TODO This hack should go away */
10705 if (connector && enable) {
10706 /* Make sure fake sink is created in plug-in scenario */
10707 drm_new_conn_state = drm_atomic_get_new_connector_state(state,
10708 connector);
drm_atomic_get_new_connector_state() can't return error pointers, only NULL.
10709 drm_old_conn_state = drm_atomic_get_old_connector_state(state,
10710 connector);
10711
10712 if (IS_ERR(drm_new_conn_state)) {
^^^^^^^^^^^^^^^^^^
10713 ret = PTR_ERR_OR_ZERO(drm_new_conn_state);
Calling PTR_ERR_OR_ZERO() doesn't make sense. It can't be success.
10714 goto fail;
10715 }
10716
...
10748
10749 dm_new_crtc_state->abm_level = dm_new_conn_state->abm_level;
10750
--> 10751 ret = fill_hdr_info_packet(drm_new_conn_state,
^^^^^^^^^^^^^^^^^^ Unchecked dereference
10752 &new_stream->hdr_static_metadata);
10753 if (ret)
10754 goto fail;
10755
v2: Modified the NULL pointer check for drm_new_conn_state in the
dm_update_crtc_state function to include a warning via WARN_ON and
return -EINVAL to indicate an invalid state when the pointer is NULL.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates the dm_force_atomic_commit function to replace the
usage of PTR_ERR_OR_ZERO with IS_ERR for checking error states after
retrieving the Connector (drm_atomic_get_connector_state), CRTC
(drm_atomic_get_crtc_state), and Plane (drm_atomic_get_plane_state)
states.
The function utilized PTR_ERR_OR_ZERO for error checking. However, this
approach is inappropriate in this context because the respective
functions do not return NULL; they return pointers that encode errors.
This change ensures that error pointers are properly checked using
IS_ERR before attempting to dereference.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since b255ce4388, it is possible that the CRTC timing
information for the preferred mode has not yet been
calculated while amdgpu_dm_connector_mode_valid() is running.
In this case use the CRTC timing information of the actual mode.
Fixes: b255ce4388 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()")
Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.
RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.
[How]
Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.
Fixes: 199888aa25 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reduction of phy-ssc is needed to support DP2 high pixel clock on dcn35x/36.
There's a special flag to enable it in dmub hw params.
[How]
Set hbr3_phy_ssc to true for dcn35, dcn351 and dcn36.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While system undergoing gpu reset always do full update
to sync the dc state before and after reset.
[How]
Return true in should_reset_plane() if gpu reset detected
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Matthew Schwartz
Ivan Lipski
Geoffrey McRae
Mario Limonciello (AMD)
Lauri Tirkkonen
Alex Deucher
Fangzhi Zuo
Austin Zheng
Yan Li
Oleh Kuzhylnyi
Aurabindo Pillai
Wayne Lin
John Olender
Alex Hung
Srinivasan Shanmugam
Gergo Koteles
Leo Li
Roman Li