mirror of https://github.com/torvalds/linux.git
1636 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Filipe Manana
|
4c0c8cfc84 |
btrfs: move btrfs_drop_extent_cache() to extent_map.c
The function btrfs_drop_extent_cache() doesn't really belong at file.c because what it does is drop a range of extent maps for a file range. It directly allocates and manipulates extent maps, by dropping, splitting and replacing them in an extent map tree, so it should be located at extent_map.c, where all manipulations of an extent map tree and its extent maps are supposed to be done. So move it out of file.c and into extent_map.c. Additionally do the following changes: 1) Rename it into btrfs_drop_extent_map_range(), as this makes it more clear about what it does. The term "cache" is a bit confusing as it's not widely used, "extent maps" or "extent mapping" is much more common; 2) Change its 'skip_pinned' argument from int to bool; 3) Turn several of its local variables from int to bool, since they are used as booleans; 4) Move the declaration of some variables out of the function's main scope and into the scopes where they are used; 5) Remove pointless assignment of false to 'modified' early in the while loop, as later that variable is set and it's not used before that second assignment; 6) Remove checks for NULL before calling free_extent_map(). Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
Jeff Layton
|
3050dfa63e |
btrfs: remove stale prototype of btrfs_write_inode
This function no longer exists, was removed in
|
|
Josef Bacik
|
80f9d24130 |
btrfs: make btrfs_check_nocow_lock nowait compatible
Now all the helpers that btrfs_check_nocow_lock uses handle nowait, add a nowait flag to btrfs_check_nocow_lock so it can be used by the write path. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
26ce911446 |
btrfs: make can_nocow_extent nowait compatible
If we have NOWAIT specified on our IOCB and we're writing into a PREALLOC or NOCOW extent then we need to be able to tell can_nocow_extent that we don't want to wait on any locks or metadata IO. Fix can_nocow_extent to allow for NOWAIT. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
857bc13f85 |
btrfs: implement a nowait option for tree searches
For NOWAIT IOCBs we'll need a way to tell search to not wait on locks or anything. Accomplish this by adding a path->nowait flag that will use trylocks and skip reading of metadata, returning -EAGAIN in either of these cases. For now we only need this for reads, so only the read side is handled. Add an ASSERT() to catch anybody trying to use this for writes so they know they'll have to implement the write side. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Stefan Roesch <shr@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
d9d88fde56 |
btrfs: move the fs_info related helpers closer to fs_info in ctree.h
This is purely cosmetic, to make it straightforward to copy and paste the definition and helpers from ctree.h into fs.h. These are helpers that act directly on the fs_info, and were scattered throughout ctree.h. Move them directly below the fs_info definition to make it easier to move them later. This includes the exclop prototypes, which shares an enum that's used in struct btrfs_fs_info as well. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
f119553fd3 |
btrfs: move btrfs_csum_ptr to inode.c
This helper is only used in inode.c, move it locally to that file instead of defining it in ctree.h. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
0e75f0054a |
btrfs: move fs_info forward declarations to the top of ctree.h
In order to make it more straightforward to move the fs_info struct and it's related structures, move the struct declarations to the top of ctree.h. This will make it easier to clean up after the fact. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
2103da3b0e |
btrfs: move btrfs_swapfile_pin into volumes.h
This isn't a great spot for this, but one of the swapfile helper functions is in volumes.c, so move the struct to volumes.h. In the future when we have better separation of code there will be a more natural spot for this. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
c2e79e865b |
btrfs: move btrfs_pinned_by_swapfile prototype into volumes.h
This is defined in volumes.c, move the prototype into volumes.h. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
43712116f8 |
btrfs: move btrfs_init_async_reclaim_work prototype to space-info.h
The code for this helper is in space-info.c, move the prototype to space-info.h. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
c29abab4f9 |
btrfs: move btrfs_full_stripe_locks_tree into block-group.h
This is actually embedded in struct btrfs_block_group, so move this definition to block-group.h, and then open-code the init of the tree where we init the rest of the block group instead of using a helper. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
16708a8898 |
btrfs: move btrfs_caching_type to block-group.h
This is a block group related definition, move it into block-group.h. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
Gaosheng Cui
|
6ea1a5264b |
btrfs: remove btrfs_bit_radix_cachep declaration
btrfs_bit_radix_cachep has been removed since
commit
|
|
Qu Wenruo
|
011b46c304 |
btrfs: skip subtree scan if it's too high to avoid low stall in btrfs_commit_transaction()
Btrfs qgroup has a long history of bringing performance penalty in btrfs_commit_transaction(). Although we tried our best to migrate such impact, there is still an unsolved call site, btrfs_drop_snapshot(). This function will find the highest shared tree block and modify its extent ownership to do a subvolume/snapshot dropping. Such change will affect the whole subtree, and cause tons of qgroup dirty extents and stall btrfs_commit_transaction(). To avoid such problem, here we introduce a new sysfs interface, /sys/fs/btrfs/<uuid>/qgroups/drop_subptree_threshold, to determine at whether and at which level we should skip qgroup accounting for subtree dropping. The default value is BTRFS_MAX_LEVEL, thus every subtree drop will go through qgroup accounting, to ensure qgroup numbers are kept as consistent as possible. While for performance sensitive cases, add a way to change the values to more reasonable values like 3, to make any subtree, which is at or higher than level 3, to mark qgroup inconsistent and skip the accounting. The cost is obvious, the qgroup number is no longer consistent, but at least performance is more reasonable, and users have the control. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Filipe Manana
|
ac3c0d36a2 |
btrfs: make fiemap more efficient and accurate reporting extent sharedness
The current fiemap implementation does not scale very well with the number
of extents a file has. This is both because the main algorithm to find out
the extents has a high algorithmic complexity and because for each extent
we have to check if it's shared. This second part, checking if an extent
is shared, is significantly improved by the two previous patches in this
patchset, while the first part is improved by this specific patch. Every
now and then we get reports from users mentioning fiemap is too slow or
even unusable for files with a very large number of extents, such as the
two recent reports referred to by the Link tags at the bottom of this
change log.
To understand why the part of finding which extents a file has is very
inefficient, consider the example of doing a full ranged fiemap against
a file that has over 100K extents (normal for example for a file with
more than 10G of data and using compression, which limits the extent size
to 128K). When we enter fiemap at extent_fiemap(), the following happens:
1) Before entering the main loop, we call get_extent_skip_holes() to get
the first extent map. This leads us to btrfs_get_extent_fiemap(), which
in turn calls btrfs_get_extent(), to find the first extent map that
covers the file range [0, LLONG_MAX).
btrfs_get_extent() will first search the inode's extent map tree, to
see if we have an extent map there that covers the range. If it does
not find one, then it will search the inode's subvolume b+tree for a
fitting file extent item. After finding the file extent item, it will
allocate an extent map, fill it in with information extracted from the
file extent item, and add it to the inode's extent map tree (which
requires a search for insertion in the tree).
2) Then we enter the main loop at extent_fiemap(), emit the details of
the extent, and call again get_extent_skip_holes(), with a start
offset matching the end of the extent map we previously processed.
We end up at btrfs_get_extent() again, will search the extent map tree
and then search the subvolume b+tree for a file extent item if we could
not find an extent map in the extent tree. We allocate an extent map,
fill it in with the details in the file extent item, and then insert
it into the extent map tree (yet another search in this tree).
3) The second step is repeated over and over, until we have processed the
whole file range. Each iteration ends at btrfs_get_extent(), which
does a red black tree search on the extent map tree, then searches the
subvolume b+tree, allocates an extent map and then does another search
in the extent map tree in order to insert the extent map.
In the best scenario we have all the extent maps already in the extent
tree, and so for each extent we do a single search on a red black tree,
so we have a complexity of O(n log n).
In the worst scenario we don't have any extent map already loaded in
the extent map tree, or have very few already there. In this case the
complexity is much higher since we do:
- A red black tree search on the extent map tree, which has O(log n)
complexity, initially very fast since the tree is empty or very
small, but as we end up allocating extent maps and adding them to
the tree when we don't find them there, each subsequent search on
the tree gets slower, since it's getting bigger and bigger after
each iteration.
- A search on the subvolume b+tree, also O(log n) complexity, but it
has items for all inodes in the subvolume, not just items for our
inode. Plus on a filesystem with concurrent operations on other
inodes, we can block doing the search due to lock contention on
b+tree nodes/leaves.
- Allocate an extent map - this can block, and can also fail if we
are under serious memory pressure.
- Do another search on the extent maps red black tree, with the goal
of inserting the extent map we just allocated. Again, after every
iteration this tree is getting bigger by 1 element, so after many
iterations the searches are slower and slower.
- We will not need the allocated extent map anymore, so it's pointless
to add it to the extent map tree. It's just wasting time and memory.
In short we end up searching the extent map tree multiple times, on a
tree that is growing bigger and bigger after each iteration. And
besides that we visit the same leaf of the subvolume b+tree many times,
since a leaf with the default size of 16K can easily have more than 200
file extent items.
This is very inefficient overall. This patch changes the algorithm to
instead iterate over the subvolume b+tree, visiting each leaf only once,
and only searching in the extent map tree for file ranges that have holes
or prealloc extents, in order to figure out if we have delalloc there.
It will never allocate an extent map and add it to the extent map tree.
This is very similar to what was previously done for the lseek's hole and
data seeking features.
Also, the current implementation relying on extent maps for figuring out
which extents we have is not correct. This is because extent maps can be
merged even if they represent different extents - we do this to minimize
memory utilization and keep extent map trees smaller. For example if we
have two extents that are contiguous on disk, once we load the two extent
maps, they get merged into a single one - however if only one of the
extents is shared, we end up reporting both as shared or both as not
shared, which is incorrect.
This reproducer triggers that bug:
$ cat fiemap-bug.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with two 256K extents.
# Since there is no other write activity, they will be contiguous,
# and their extent maps merged, despite having two distinct extents.
xfs_io -f -c "pwrite -S 0xab 0 256K" \
-c "fsync" \
-c "pwrite -S 0xcd 256K 256K" \
-c "fsync" \
$MNT/foo
# Now clone only the second extent into another file.
xfs_io -f -c "reflink $MNT/foo 256K 0 256K" $MNT/bar
# Filefrag will report a single 512K extent, and say it's not shared.
echo
filefrag -v $MNT/foo
umount $MNT
Running the reproducer:
$ ./fiemap-bug.sh
wrote 262144/262144 bytes at offset 0
256 KiB, 64 ops; 0.0038 sec (65.479 MiB/sec and 16762.7030 ops/sec)
wrote 262144/262144 bytes at offset 262144
256 KiB, 64 ops; 0.0040 sec (61.125 MiB/sec and 15647.9218 ops/sec)
linked 262144/262144 bytes at offset 0
256 KiB, 1 ops; 0.0002 sec (1.034 GiB/sec and 4237.2881 ops/sec)
Filesystem type is: 9123683e
File size of /mnt/sdj/foo is 524288 (128 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 3328.. 3455: 128: last,eof
/mnt/sdj/foo: 1 extent found
We end up reporting that we have a single 512K that is not shared, however
we have two 256K extents, and the second one is shared. Changing the
reproducer to clone instead the first extent into file 'bar', makes us
report a single 512K extent that is shared, which is algo incorrect since
we have two 256K extents and only the first one is shared.
This patch is part of a larger patchset that is comprised of the following
patches:
btrfs: allow hole and data seeking to be interruptible
btrfs: make hole and data seeking a lot more efficient
btrfs: remove check for impossible block start for an extent map at fiemap
btrfs: remove zero length check when entering fiemap
btrfs: properly flush delalloc when entering fiemap
btrfs: allow fiemap to be interruptible
btrfs: rename btrfs_check_shared() to a more descriptive name
btrfs: speedup checking for extent sharedness during fiemap
btrfs: skip unnecessary extent buffer sharedness checks during fiemap
btrfs: make fiemap more efficient and accurate reporting extent sharedness
The patchset was tested on a machine running a non-debug kernel (Debian's
default config) and compared the tests below on a branch without the
patchset versus the same branch with the whole patchset applied.
The following test for a large compressed file without holes:
$ cat fiemap-perf-test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 128K file extents (due to compression).
xfs_io -f -c "pwrite -S 0xab -b 1M 0 20G" $MNT/foobar
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Before patchset:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 3597 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 2107 milliseconds (metadata cached)
After patchset:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1214 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 684 milliseconds (metadata cached)
That's a speedup of about 3x for both cases (no metadata cached and all
metadata cached).
The test provided by Pavel (first Link tag at the bottom), which uses
files with a large number of holes, was also used to measure the gains,
and it consists on a small C program and a shell script to invoke it.
The C program is the following:
$ cat pavels-test.c
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/ioctl.h>
#include <linux/fs.h>
#include <linux/fiemap.h>
#define FILE_INTERVAL (1<<13) /* 8Kb */
long long interval(struct timeval t1, struct timeval t2)
{
long long val = 0;
val += (t2.tv_usec - t1.tv_usec);
val += (t2.tv_sec - t1.tv_sec) * 1000 * 1000;
return val;
}
int main(int argc, char **argv)
{
struct fiemap fiemap = {};
struct timeval t1, t2;
char data = 'a';
struct stat st;
int fd, off, file_size = FILE_INTERVAL;
if (argc != 3 && argc != 2) {
printf("usage: %s <path> [size]\n", argv[0]);
return 1;
}
if (argc == 3)
file_size = atoi(argv[2]);
if (file_size < FILE_INTERVAL)
file_size = FILE_INTERVAL;
file_size -= file_size % FILE_INTERVAL;
fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0644);
if (fd < 0) {
perror("open");
return 1;
}
for (off = 0; off < file_size; off += FILE_INTERVAL) {
if (pwrite(fd, &data, 1, off) != 1) {
perror("pwrite");
close(fd);
return 1;
}
}
if (ftruncate(fd, file_size)) {
perror("ftruncate");
close(fd);
return 1;
}
if (fstat(fd, &st) < 0) {
perror("fstat");
close(fd);
return 1;
}
printf("size: %ld\n", st.st_size);
printf("actual size: %ld\n", st.st_blocks * 512);
fiemap.fm_length = FIEMAP_MAX_OFFSET;
gettimeofday(&t1, NULL);
if (ioctl(fd, FS_IOC_FIEMAP, &fiemap) < 0) {
perror("fiemap");
close(fd);
return 1;
}
gettimeofday(&t2, NULL);
printf("fiemap: fm_mapped_extents = %d\n",
fiemap.fm_mapped_extents);
printf("time = %lld us\n", interval(t1, t2));
close(fd);
return 0;
}
$ gcc -o pavels_test pavels_test.c
And the wrapper shell script:
$ cat fiemap-pavels-test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f -O no-holes $DEV
mount $DEV $MNT
echo
echo "*********** 256M ***********"
echo
./pavels-test $MNT/testfile $((1 << 28))
echo
./pavels-test $MNT/testfile $((1 << 28))
echo
echo "*********** 512M ***********"
echo
./pavels-test $MNT/testfile $((1 << 29))
echo
./pavels-test $MNT/testfile $((1 << 29))
echo
echo "*********** 1G ***********"
echo
./pavels-test $MNT/testfile $((1 << 30))
echo
./pavels-test $MNT/testfile $((1 << 30))
umount $MNT
Running his reproducer before applying the patchset:
*********** 256M ***********
size: 268435456
actual size: 134217728
fiemap: fm_mapped_extents = 32768
time =
|
|
|
Filipe Manana
|
12a824dc67 |
btrfs: speedup checking for extent sharedness during fiemap
One of the most expensive tasks performed during fiemap is to check if
an extent is shared. This task has two major steps:
1) Check if the data extent is shared. This implies checking the extent
item in the extent tree, checking delayed references, etc. If we
find the data extent is directly shared, we terminate immediately;
2) If the data extent is not directly shared (its extent item has a
refcount of 1), then it may be shared if we have snapshots that share
subtrees of the inode's subvolume b+tree. So we check if the leaf
containing the file extent item is shared, then its parent node, then
the parent node of the parent node, etc, until we reach the root node
or we find one of them is shared - in which case we stop immediately.
During fiemap we process the extents of a file from left to right, from
file offset 0 to EOF. This means that we iterate b+tree leaves from left
to right, and has the implication that we keep repeating that second step
above several times for the same b+tree path of the inode's subvolume
b+tree.
For example, if we have two file extent items in leaf X, and the path to
leaf X is A -> B -> C -> X, then when we try to determine if the data
extent referenced by the first extent item is shared, we check if the data
extent is shared - if it's not, then we check if leaf X is shared, if not,
then we check if node C is shared, if not, then check if node B is shared,
if not than check if node A is shared. When we move to the next file
extent item, after determining the data extent is not shared, we repeat
the checks for X, C, B and A - doing all the expensive searches in the
extent tree, delayed refs, etc. If we have thousands of tile extents, then
we keep repeating the sharedness checks for the same paths over and over.
On a file that has no shared extents or only a small portion, it's easy
to see that this scales terribly with the number of extents in the file
and the sizes of the extent and subvolume b+trees.
This change eliminates the repeated sharedness check on extent buffers
by caching the results of the last path used. The results can be used as
long as no snapshots were created since they were cached (for not shared
extent buffers) or no roots were dropped since they were cached (for
shared extent buffers). This greatly reduces the time spent by fiemap for
files with thousands of extents and/or large extent and subvolume b+trees.
Example performance test:
$ cat fiemap-perf-test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 128K file extents (due to compression).
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Before this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 3597 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 2107 milliseconds (metadata cached)
After this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1646 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 698 milliseconds (metadata cached)
That's about 2.2x faster when no metadata is cached, and about 3x faster
when all metadata is cached. On a real filesystem with many other files,
data, directories, etc, the b+trees will be 2 or 3 levels higher,
therefore this optimization will have a higher impact.
Several reports of a slow fiemap show up often, the two Link tags below
refer to two recent reports of such slowness. This patch, together with
the next ones in the series, is meant to address that.
Link: https://lore.kernel.org/linux-btrfs/21dd32c6-f1f9-f44a-466a-e18fdc6788a7@virtuozzo.com/
Link: https://lore.kernel.org/linux-btrfs/Ysace25wh5BbLd5f@atmark-techno.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
|
Qu Wenruo
|
1c56ab9919 |
btrfs: separate BLOCK_GROUP_TREE compat RO flag from EXTENT_TREE_V2
The problem of long mount time caused by block group item search is already known for some time, and the solution of block group tree has been proposed. There is really no need to bound this feature into extent tree v2, just introduce compat RO flag, BLOCK_GROUP_TREE, to correctly solve the problem. All the code handling block group root is already in the upstream kernel, thus this patch really only needs to introduce the new compat RO flag. This patch introduces one extra artificial limitation on block group tree feature, that free space cache v2 and no-holes feature must be enabled to use this new compat RO feature. This artificial requirement is mostly to reduce the test combinations, and can be a guideline for future features, to mostly rely on the latest default features. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Qu Wenruo
|
14033b08a0 |
btrfs: don't save block group root into super block
The extent tree v2 needs a new root for storing all block group items, the whole feature hasn't been finished yet so we can afford to do some changes. My initial proposal years ago just added a new tree rootid, and load it from tree root, just like what we did for quota/free space tree/uuid/extent roots. But the extent tree v2 patches introduced a completely new way to store block group tree root into super block which is arguably wasteful. Currently there are only 3 trees stored in super blocks, and they all have their valid reasons: - Chunk root Needed for bootstrap. - Tree root Really the entry point for all trees. - Log root This is special as log root has to be updated out of existing transaction mechanism. There is not even any reason to put block group root into super blocks, the block group tree is updated at the same time as the old extent tree, no need for extra bootstrap/out-of-transaction update. So just move block group root from super block into tree root. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Qu Wenruo
|
8e327b9c0d |
btrfs: dump all space infos if we abort transaction due to ENOSPC
We have hit some transaction abort due to -ENOSPC internally. Normally we should always reserve enough space for metadata for every transaction, thus hitting -ENOSPC should really indicate some cases we didn't expect. But unfortunately current error reporting will only give a kernel warning and stack trace, not really helpful to debug what's causing the problem. And mount option debug_enospc can only help when user can reproduce the problem, but under most cases, such transaction abort by -ENOSPC is really hard to reproduce. So this patch will dump all space infos (data, metadata, system) when we abort the first transaction with -ENOSPC. This should at least provide some clue to us. The example of a dump would look like this: BTRFS: Transaction aborted (error -28) WARNING: CPU: 8 PID: 3366 at fs/btrfs/transaction.c:2137 btrfs_commit_transaction+0xf81/0xfb0 [btrfs] <call trace skipped> ---[ end trace 0000000000000000 ]--- BTRFS info (device dm-1: state A): dumping space info: BTRFS info (device dm-1: state A): space_info DATA has 6791168 free, is not full BTRFS info (device dm-1: state A): space_info total=8388608, used=1597440, pinned=0, reserved=0, may_use=0, readonly=0 zone_unusable=0 BTRFS info (device dm-1: state A): space_info METADATA has 257114112 free, is not full BTRFS info (device dm-1: state A): space_info total=268435456, used=131072, pinned=180224, reserved=65536, may_use=10878976, readonly=65536 zone_unusable=0 BTRFS info (device dm-1: state A): space_info SYSTEM has 8372224 free, is not full BTRFS info (device dm-1: state A): space_info total=8388608, used=16384, pinned=0, reserved=0, may_use=0, readonly=0 zone_unusable=0 BTRFS info (device dm-1: state A): global_block_rsv: size 3670016 reserved 3670016 BTRFS info (device dm-1: state A): trans_block_rsv: size 0 reserved 0 BTRFS info (device dm-1: state A): chunk_block_rsv: size 0 reserved 0 BTRFS info (device dm-1: state A): delayed_block_rsv: size 4063232 reserved 4063232 BTRFS info (device dm-1: state A): delayed_refs_rsv: size 3145728 reserved 3145728 BTRFS: error (device dm-1: state A) in btrfs_commit_transaction:2137: errno=-28 No space left BTRFS info (device dm-1: state EA): forced readonly Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
Christoph Hellwig
|
2bbc72f14f |
btrfs: don't take a bio_counter reference for cloned bios
Stop grabbing an extra bio_counter reference for each clone bio in a mirrored write and instead just release the one original reference in btrfs_end_bioc once all the bios for a single btrfs_bio have completed instead of at the end of btrfs_submit_bio once all bios have been submitted. This means the reference is now carried by the "upper" btrfs_bio only instead of each lower bio. Also remove the now unused btrfs_bio_counter_inc_noblocked helper. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> |
|
David Sterba
|
fb731430be |
btrfs: sysfs: show discard stats and tunables in non-debug build
When discard=async was introduced there were also sysfs knobs and stats
for debugging and tuning, hidden under CONFIG_BTRFS_DEBUG. The defaults
have been set and so far seem to satisfy all users on a range of
workloads. As there are not only tunables (like iops or kbps) but also
stats tracking amount of discardable bytes, that should be available
when the async discard is on (otherwise it's not).
The stats are moved from the per-fs debug directory, so it's under
/sys/fs/btrfs/FSID/discard
- discard_bitmap_bytes - amount of discarded bytes from data tracked as
bitmaps
- discard_extent_bytes - dtto but as extents
- discard_bytes_saved -
- discardable_bytes - amount of bytes that can be discarded
- discardable_extents - number of extents to be discarded
- iops_limit - tunable limit of number of discard IOs to be issued
- kbps_limit - tunable limit of kilobytes per second issued as discard IO
- max_discard_size - tunable limit for size of one IO discard request
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Boris Burkov
|
38622010a6 |
btrfs: send: add support for fs-verity
Preserve the fs-verity status of a btrfs file across send/recv. There is no facility for installing the Merkle tree contents directly on the receiving filesystem, so we package up the parameters used to enable verity found in the verity descriptor. This gives the receive side enough information to properly enable verity again. Note that this means that receive will have to re-compute the whole Merkle tree, similar to how compression worked before encoded_write. Since the file becomes read-only after verity is enabled, it is important that verity is added to the send stream after any file writes. Therefore, when we process a verity item, merely note that it happened, then actually create the command in the send stream during 'finish_inode_if_needed'. This also creates V3 of the send stream format, without any format changes besides adding the new commands and attributes. Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> |
|
Omar Sandoval
|
d1f68ba069 |
btrfs: rename btrfs_insert_file_extent() to btrfs_insert_hole_extent()
btrfs_insert_file_extent() is only ever used to insert holes, so rename it and remove the redundant parameters. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
Ioannis Angelakopoulos
|
5f4403e10f |
btrfs: add lockdep annotations for the ordered extents wait event
This wait event is very similar to the pending ordered wait event in the sense that it occurs in a different context than the condition signaling for the event. The signaling occurs in btrfs_remove_ordered_extent() while the wait event is implemented in btrfs_start_ordered_extent() in fs/btrfs/ordered-data.c However, in this case a thread must not acquire the lockdep map for the ordered extents wait event when the ordered extent is related to a free space inode. That is because lockdep creates dependencies between locks acquired both in execution paths related to normal inodes and paths related to free space inodes, thus leading to false positives. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Ioannis Angelakopoulos
|
8b53779eaa |
btrfs: add lockdep annotations for pending_ordered wait event
In contrast to the num_writers and num_extwriters wait events, the condition for the pending ordered wait event is signaled in a different context from the wait event itself. The condition signaling occurs in btrfs_remove_ordered_extent() in fs/btrfs/ordered-data.c while the wait event is implemented in btrfs_commit_transaction() in fs/btrfs/transaction.c Thus the thread signaling the condition has to acquire the lockdep map as a reader at the start of btrfs_remove_ordered_extent() and release it after it has signaled the condition. In this case some dependencies might be left out due to the placement of the annotation, but it is better than no annotation at all. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Ioannis Angelakopoulos
|
3e738c531a |
btrfs: add lockdep annotations for transaction states wait events
Add lockdep annotations for the transaction states that have wait events; 1) TRANS_STATE_COMMIT_START 2) TRANS_STATE_UNBLOCKED 3) TRANS_STATE_SUPER_COMMITTED 4) TRANS_STATE_COMPLETED The new macros introduced here to annotate the transaction states wait events have the same effect as the generic lockdep annotation macros. With the exception of the lockdep annotation for TRANS_STATE_COMMIT_START the transaction thread has to acquire the lockdep maps for the transaction states as reader after the lockdep map for num_writers is released so that lockdep does not complain. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Ioannis Angelakopoulos
|
5a9ba6709f |
btrfs: add lockdep annotations for num_extwriters wait event
Similarly to the num_writers wait event in fs/btrfs/transaction.c add a lockdep annotation for the num_extwriters wait event. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Ioannis Angelakopoulos
|
e1489b4fe6 |
btrfs: add lockdep annotations for num_writers wait event
Annotate the num_writers wait event in fs/btrfs/transaction.c with lockdep in order to catch deadlocks involving this wait event. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Ioannis Angelakopoulos
|
ab9a323f9a |
btrfs: add macros for annotating wait events with lockdep
Introduce four macros that are used to annotate wait events in btrfs code
with lockdep;
1) the btrfs_lockdep_init_map
2) the btrfs_lockdep_acquire,
3) the btrfs_lockdep_release
4) the btrfs_might_wait_for_event macros.
The btrfs_lockdep_init_map macro is used to initialize a lockdep map.
The btrfs_lockdep_<acquire,release> macros are used by threads to take
the lockdep map as readers (shared lock) and release it, respectively.
The btrfs_might_wait_for_event macro is used by threads to take the
lockdep map as writers (exclusive lock) and release it.
In general, the lockdep annotation for wait events work as follows:
The condition for a wait event can be modified and signaled at the same
time by multiple threads. These threads hold the lockdep map as readers
when they enter a context in which blocking would prevent signaling the
condition. Frequently, this occurs when a thread violates a condition
(lockdep map acquire), before restoring it and signaling it at a later
point (lockdep map release).
The threads that block on the wait event take the lockdep map as writers
(exclusive lock). These threads have to block until all the threads that
hold the lockdep map as readers signal the condition for the wait event
and release the lockdep map.
The lockdep annotation is used to warn about potential deadlock scenarios
that involve the threads that modify and signal the wait event condition
and threads that block on the wait event. A simple example is illustrated
below:
Without lockdep:
TA TB
cond = false
lock(A)
wait_event(w, cond)
unlock(A)
lock(A)
cond = true
signal(w)
unlock(A)
With lockdep:
TA TB
rwsem_acquire_read(lockdep_map)
cond = false
lock(A)
rwsem_acquire(lockdep_map)
rwsem_release(lockdep_map)
wait_event(w, cond)
unlock(A)
lock(A)
cond = true
signal(w)
unlock(A)
rwsem_release(lockdep_map)
In the second case, with the lockdep annotation, lockdep would warn about
an ABBA deadlock, while the first case would just deadlock at some point.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Naohiro Aota
|
d5b81ced74 |
btrfs: zoned: fix API misuse of zone finish waiting
The commit |
|
Omar Sandoval
|
ced8ecf026 |
btrfs: fix space cache corruption and potential double allocations
When testing space_cache v2 on a large set of machines, we encountered a few symptoms: 1. "unable to add free space :-17" (EEXIST) errors. 2. Missing free space info items, sometimes caught with a "missing free space info for X" error. 3. Double-accounted space: ranges that were allocated in the extent tree and also marked as free in the free space tree, ranges that were marked as allocated twice in the extent tree, or ranges that were marked as free twice in the free space tree. If the latter made it onto disk, the next reboot would hit the BUG_ON() in add_new_free_space(). 4. On some hosts with no on-disk corruption or error messages, the in-memory space cache (dumped with drgn) disagreed with the free space tree. All of these symptoms have the same underlying cause: a race between caching the free space for a block group and returning free space to the in-memory space cache for pinned extents causes us to double-add a free range to the space cache. This race exists when free space is cached from the free space tree (space_cache=v2) or the extent tree (nospace_cache, or space_cache=v1 if the cache needs to be regenerated). struct btrfs_block_group::last_byte_to_unpin and struct btrfs_block_group::progress are supposed to protect against this race, but commit |
|
|
Josef Bacik
|
b40130b23c |
btrfs: fix lockdep splat with reloc root extent buffers
We have been hitting the following lockdep splat with btrfs/187 recently WARNING: possible circular locking dependency detected 5.19.0-rc8+ #775 Not tainted ------------------------------------------------------ btrfs/752500 is trying to acquire lock: ffff97e1875a97b8 (btrfs-treloc-02#2){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110 but task is already holding lock: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-tree-01/1){+.+.}-{3:3}: down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_init_new_buffer+0x7d/0x2c0 btrfs_alloc_tree_block+0x120/0x3b0 __btrfs_cow_block+0x136/0x600 btrfs_cow_block+0x10b/0x230 btrfs_search_slot+0x53b/0xb70 btrfs_lookup_inode+0x2a/0xa0 __btrfs_update_delayed_inode+0x5f/0x280 btrfs_async_run_delayed_root+0x24c/0x290 btrfs_work_helper+0xf2/0x3e0 process_one_work+0x271/0x590 worker_thread+0x52/0x3b0 kthread+0xf0/0x120 ret_from_fork+0x1f/0x30 -> #1 (btrfs-tree-01){++++}-{3:3}: down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_search_slot+0x3c3/0xb70 do_relocation+0x10c/0x6b0 relocate_tree_blocks+0x317/0x6d0 relocate_block_group+0x1f1/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (btrfs-treloc-02#2){+.+.}-{3:3}: __lock_acquire+0x1122/0x1e10 lock_acquire+0xc2/0x2d0 down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_lock_root_node+0x31/0x50 btrfs_search_slot+0x1cb/0xb70 replace_path+0x541/0x9f0 merge_reloc_root+0x1d6/0x610 merge_reloc_roots+0xe2/0x260 relocate_block_group+0x2c8/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Chain exists of: btrfs-treloc-02#2 --> btrfs-tree-01 --> btrfs-tree-01/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-tree-01/1); lock(btrfs-tree-01); lock(btrfs-tree-01/1); lock(btrfs-treloc-02#2); *** DEADLOCK *** 7 locks held by btrfs/752500: #0: ffff97e292fdf460 (sb_writers#12){.+.+}-{0:0}, at: btrfs_ioctl+0x208/0x2c90 #1: ffff97e284c02050 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0x55f/0xe40 #2: ffff97e284c00878 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x236/0x400 #3: ffff97e292fdf650 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xef/0x610 #4: ffff97e284c02378 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0 #5: ffff97e284c023a0 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0 #6: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110 stack backtrace: CPU: 1 PID: 752500 Comm: btrfs Not tainted 5.19.0-rc8+ #775 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x56/0x73 check_noncircular+0xd6/0x100 ? lock_is_held_type+0xe2/0x140 __lock_acquire+0x1122/0x1e10 lock_acquire+0xc2/0x2d0 ? __btrfs_tree_lock+0x24/0x110 down_write_nested+0x41/0x80 ? __btrfs_tree_lock+0x24/0x110 __btrfs_tree_lock+0x24/0x110 btrfs_lock_root_node+0x31/0x50 btrfs_search_slot+0x1cb/0xb70 ? lock_release+0x137/0x2d0 ? _raw_spin_unlock+0x29/0x50 ? release_extent_buffer+0x128/0x180 replace_path+0x541/0x9f0 merge_reloc_root+0x1d6/0x610 merge_reloc_roots+0xe2/0x260 relocate_block_group+0x2c8/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 ? lock_is_held_type+0xe2/0x140 ? lock_is_held_type+0xe2/0x140 ? __x64_sys_ioctl+0x88/0xc0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd This isn't necessarily new, it's just tricky to hit in practice. There are two competing things going on here. With relocation we create a snapshot of every fs tree with a reloc tree. Any extent buffers that get initialized here are initialized with the reloc root lockdep key. However since it is a snapshot, any blocks that are currently in cache that originally belonged to the fs tree will have the normal tree lockdep key set. This creates the lock dependency of reloc tree -> normal tree for the extent buffer locking during the first phase of the relocation as we walk down the reloc root to relocate blocks. However this is problematic because the final phase of the relocation is merging the reloc root into the original fs root. This involves searching down to any keys that exist in the original fs root and then swapping the relocated block and the original fs root block. We have to search down to the fs root first, and then go search the reloc root for the block we need to replace. This creates the dependency of normal tree -> reloc tree which is why lockdep complains. Additionally even if we were to fix this particular mismatch with a different nesting for the merge case, we're still slotting in a block that has a owner of the reloc root objectid into a normal tree, so that block will have its lockdep key set to the tree reloc root, and create a lockdep splat later on when we wander into that block from the fs root. Unfortunately the only solution here is to make sure we do not set the lockdep key to the reloc tree lockdep key normally, and then reset any blocks we wander into from the reloc root when we're doing the merged. This solves the problem of having mixed tree reloc keys intermixed with normal tree keys, and then allows us to make sure in the merge case we maintain the lock order of normal tree -> reloc tree We handle this by setting a bit on the reloc root when we do the search for the block we want to relocate, and any block we search into or COW at that point gets set to the reloc tree key. This works correctly because we only ever COW down to the parent node, so we aren't resetting the key for the block we're linking into the fs root. With this patch we no longer have the lockdep splat in btrfs/187. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Christoph Hellwig
|
81bd9328ab |
btrfs: fix repair of compressed extents
Currently the checksum of compressed extents is verified based on the
compressed data and the lower btrfs_bio, but the actual repair process
is driven by end_bio_extent_readpage on the upper btrfs_bio for the
decompressed data.
This has a bunch of issues, including not being able to properly
communicate the failed mirror up in case that the I/O submission got
preempted, a general loss of if an error was an I/O error or a checksum
verification failure, but most importantly that this design causes
btrfs_clean_io_failure to eventually write back the uncompressed good
data onto the disk sectors that are supposed to contain compressed data.
Fix this by moving the repair to the lower btrfs_bio. To do so, a fair
amount of code has to be reshuffled:
a) the lower btrfs_bio now needs a valid csum pointer. The easiest way
to achieve that is to pass NULL btrfs_lookup_bio_sums and just use
the btrfs_bio management of csums. For a compressed_bio that is
split into multiple btrfs_bios this means additional memory
allocations, but the code becomes a lot more regular.
b) checksum verification now runs directly on the lower btrfs_bio instead
of the compressed_bio. This actually nicely simplifies the end I/O
processing.
c) btrfs_repair_one_sector can't just look up the logical address for
the file offset any more, as there is no corresponding relative
offsets that apply to the file offset and the logic address for
compressed extents. Instead require that the saved bvec_iter in the
btrfs_bio is filled out for all read bios and use that, which again
removes a fair amount of code.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
|
Christoph Hellwig
|
7959bd4411 |
btrfs: remove the start argument to check_data_csum and export
Derive the value of start from the btrfs_bio now that ->file_offset is always valid. Also export and rename the function so it's available outside of inode.c as we'll need that soon. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Naohiro Aota
|
2ce543f478 |
btrfs: zoned: wait until zone is finished when allocation didn't progress
When the allocated position doesn't progress, we cannot submit IOs to
finish a block group, but there should be ongoing IOs that will finish a
block group. So, in that case, we wait for a zone to be finished and retry
the allocation after that.
Introduce a new flag BTRFS_FS_NEED_ZONE_FINISH for fs_info->flags to
indicate we need a zone finish to have proceeded. The flag is set when the
allocator detected it cannot activate a new block group. And, it is cleared
once a zone is finished.
CC: stable@vger.kernel.org # 5.16+
Fixes:
|
|
|
Naohiro Aota
|
7d7672bc5d |
btrfs: convert count_max_extents() to use fs_info->max_extent_size
If count_max_extents() uses BTRFS_MAX_EXTENT_SIZE to calculate the number
of extents needed, btrfs release the metadata reservation too much on its
way to write out the data.
Now that BTRFS_MAX_EXTENT_SIZE is replaced with fs_info->max_extent_size,
convert count_max_extents() to use it instead, and fix the calculation of
the metadata reservation.
CC: stable@vger.kernel.org # 5.12+
Fixes:
|
|
|
Naohiro Aota
|
f7b12a62f0 |
btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size
On zoned filesystem, data write out is limited by max_zone_append_size,
and a large ordered extent is split according the size of a bio. OTOH,
the number of extents to be written is calculated using
BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the
metadata bytes to update and/or create the metadata items.
The metadata reservation is done at e.g, btrfs_buffered_write() and then
released according to the estimation changes. Thus, if the number of extent
increases massively, the reserved metadata can run out.
The increase of the number of extents easily occurs on zoned filesystem
if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the
following warning on a small RAM environment with disabling metadata
over-commit (in the following patch).
[75721.498492] ------------[ cut here ]------------
[75721.505624] BTRFS: block rsv 1 returned -28
[75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G W 5.18.0-rc2-BTRFS-ZNS+ #109
[75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
[75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286
[75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000
[75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e
[75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7
[75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28
[75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a
[75721.701878] FS: 0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000
[75721.712601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0
[75721.730499] Call Trace:
[75721.735166] <TASK>
[75721.739886] btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs]
[75721.747545] ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs]
[75721.756145] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.762852] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.769520] ? push_leaf_left+0x420/0x620 [btrfs]
[75721.776431] ? memcpy+0x4e/0x60
[75721.781931] split_leaf+0x433/0x12d0 [btrfs]
[75721.788392] ? btrfs_get_token_32+0x580/0x580 [btrfs]
[75721.795636] ? push_for_double_split.isra.0+0x420/0x420 [btrfs]
[75721.803759] ? leaf_space_used+0x15d/0x1a0 [btrfs]
[75721.811156] btrfs_search_slot+0x1bc3/0x2790 [btrfs]
[75721.818300] ? lock_downgrade+0x7c0/0x7c0
[75721.824411] ? free_extent_buffer.part.0+0x107/0x200 [btrfs]
[75721.832456] ? split_leaf+0x12d0/0x12d0 [btrfs]
[75721.839149] ? free_extent_buffer.part.0+0x14f/0x200 [btrfs]
[75721.846945] ? free_extent_buffer+0x13/0x20 [btrfs]
[75721.853960] ? btrfs_release_path+0x4b/0x190 [btrfs]
[75721.861429] btrfs_csum_file_blocks+0x85c/0x1500 [btrfs]
[75721.869313] ? rcu_read_lock_sched_held+0x16/0x80
[75721.876085] ? lock_release+0x552/0xf80
[75721.881957] ? btrfs_del_csums+0x8c0/0x8c0 [btrfs]
[75721.888886] ? __kasan_check_write+0x14/0x20
[75721.895152] ? do_raw_read_unlock+0x44/0x80
[75721.901323] ? _raw_write_lock_irq+0x60/0x80
[75721.907983] ? btrfs_global_root+0xb9/0xe0 [btrfs]
[75721.915166] ? btrfs_csum_root+0x12b/0x180 [btrfs]
[75721.921918] ? btrfs_get_global_root+0x820/0x820 [btrfs]
[75721.929166] ? _raw_write_unlock+0x23/0x40
[75721.935116] ? unpin_extent_cache+0x1e3/0x390 [btrfs]
[75721.942041] btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs]
[75721.949906] ? try_to_wake_up+0x30/0x14a0
[75721.955700] ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs]
[75721.962661] ? rcu_read_lock_sched_held+0x16/0x80
[75721.969111] ? lock_acquire+0x41b/0x4c0
[75721.974982] finish_ordered_fn+0x15/0x20 [btrfs]
[75721.981639] btrfs_work_helper+0x1af/0xa80 [btrfs]
[75721.988184] ? _raw_spin_unlock_irq+0x28/0x50
[75721.994643] process_one_work+0x815/0x1460
[75722.000444] ? pwq_dec_nr_in_flight+0x250/0x250
[75722.006643] ? do_raw_spin_trylock+0xbb/0x190
[75722.013086] worker_thread+0x59a/0xeb0
[75722.018511] kthread+0x2ac/0x360
[75722.023428] ? process_one_work+0x1460/0x1460
[75722.029431] ? kthread_complete_and_exit+0x30/0x30
[75722.036044] ret_from_fork+0x22/0x30
[75722.041255] </TASK>
[75722.045047] irq event stamp: 0
[75722.049703] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[75722.057610] hardirqs last disabled at (0): [<ffffffff8118a94a>] copy_process+0x1c1a/0x66b0
[75722.067533] softirqs last enabled at (0): [<ffffffff8118a989>] copy_process+0x1c59/0x66b0
[75722.077423] softirqs last disabled at (0): [<0000000000000000>] 0x0
[75722.085335] ---[ end trace 0000000000000000 ]---
To fix the estimation, we need to introduce fs_info->max_extent_size to
replace BTRFS_MAX_EXTENT_SIZE, which allow setting the different size for
regular vs zoned filesystem.
Set fs_info->max_extent_size to BTRFS_MAX_EXTENT_SIZE by default. On zoned
filesystem, it is set to fs_info->max_zone_append_size.
CC: stable@vger.kernel.org # 5.12+
Fixes:
|
|
|
Naohiro Aota
|
c2ae7b772e |
btrfs: zoned: revive max_zone_append_bytes
This patch is basically a revert of commit
|
|
|
Ioannis Angelakopoulos
|
e55958c8a0 |
btrfs: collect commit stats, count, duration
Track several stats about transaction commit, to be later exported via sysfs: - number of commits so far - duration of the last commit in ns - maximum commit duration seen so far in ns - total duration for all commits so far in ns The update of the commit stats occurs after the commit thread has gone through all the logic that checks if there is another thread committing at the same time. This means that we only account for actual commit work in the commit stats we report and not the time the thread spends waiting until it is ready to do the commit work. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Ioannis Angelakopoulos <iangelak@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Qu Wenruo
|
37f85ec320 |
btrfs: use named constant for reserved device space
There's a reserved space on each device of size 1MiB that can be used by bootloaders or to avoid accidental overwrite. Use a symbolic constant with the explaining comment instead of hard coding the value and multiple comments. Note: since btrfs-progs v4.1, mkfs.btrfs will reserve the first 1MiB for the primary super block (at offset 64KiB), until then the range could have been used by mistake. Kernel has been always respecting the 1MiB range for writes. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
David Sterba
|
6d92b304ec |
btrfs: pass bits by value not by pointer for extent_state helpers
The bits are passed to all extent state helpers for no apparent reason, the value only read and never updated so remove the indirection and pass it directly. Also unify the type to u32 where needed. Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Qu Wenruo
|
97f09d55f1 |
btrfs: make btrfs_super_block::log_root_transid deprecated
When using "btrfs inspect-internal dump-super" to inspect an fs with dirty log, it always shows the log_root_transid as 0: log_root 30474240 log_root_transid 0 <<< log_root_level 0 It turns out that, btrfs_super_block::log_root_transid is never really utilized (even no read for it). This can date back to the introduction of btrfs into upstream kernel. In fact, when reading log tree root, we always use btrfs_super_block::generation + 1 as the expected generation. So here we're completely safe to mark this member deprecated. In theory we can easily reuse this member for other purposes, but to be extra safe, here we follow the leafsize way, by adding "__unused_" for log_root_transid. And we can safely remove the accessors, since there is no such callers from the very beginning. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Christoph Hellwig
|
d7b9416fe5 |
btrfs: remove btrfs_end_io_wq
All reads bio that go through btrfs_map_bio need to be completed in user context. And read I/Os are the most common and timing critical in almost any file system workloads. Embed a work_struct into struct btrfs_bio and use it to complete all read bios submitted through btrfs_map, using the REQ_META flag to decide which workqueue they are placed on. This removes the need for a separate 128 byte allocation (typically rounded up to 192 bytes by slab) for all reads with a size increase of 24 bytes for struct btrfs_bio. Future patches will reorganize struct btrfs_bio to make use of this extra space for writes as well. (All sizes are based a on typical 64-bit non-debug build) Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Christoph Hellwig
|
fed8a72df1 |
btrfs: don't use btrfs_bio_wq_end_io for compressed writes
Compressed write bio completion is the only user of btrfs_bio_wq_end_io for writes, and the use of btrfs_bio_wq_end_io is a little suboptimal here as we only real need user context for the final completion of a compressed_bio structure, and not every single bio completion. Add a work_struct to struct compressed_bio instead and use that to call finish_compressed_bio_write. This allows to remove all handling of write bios in the btrfs_bio_wq_end_io infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Christoph Hellwig
|
d34e123de1 |
btrfs: defer I/O completion based on the btrfs_raid_bio
Instead of attaching an extra allocation an indirect call to each low-level bio issued by the RAID code, add a work_struct to struct btrfs_raid_bio and only defer the per-rbio completion action. The per-bio action for all the I/Os are trivial and can be safely done from interrupt context. As a nice side effect this also allows sharing the boilerplate code for the per-bio completions Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Christoph Hellwig
|
c93104e758 |
btrfs: split btrfs_submit_data_bio to read and write parts
Split btrfs_submit_data_bio into one helper for reads and one for writes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Omar Sandoval
|
3ea4dc5bf0 |
btrfs: send: send compressed extents with encoded writes
Now that all of the pieces are in place, we can use the ENCODED_WRITE command to send compressed extents when appropriate. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Christoph Hellwig
|
a89ce08ce6 |
btrfs: factor out a btrfs_csum_ptr helper
Add a helper to find the csum for a byte offset into the csum buffer. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Qu Wenruo
|
ae643a74eb |
btrfs: introduce a data checksum checking helper
Although we have several data csum verification code, we never have a
function really just to verify checksum for one sector.
Function check_data_csum() do extra work for error reporting, thus it
requires a lot of extra things like file offset, bio_offset etc.
Function btrfs_verify_data_csum() is even worse, it will utilize page
checked flag, which means it can not be utilized for direct IO pages.
Here we introduce a new helper, btrfs_check_sector_csum(), which really
only accept a sector in page, and expected checksum pointer.
We use this function to implement check_data_csum(), and export it for
incoming patch.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[hch: keep passing the csum array as an arguments, as the callers want
to print it, rename per request]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|