During a DPC error kernel waits for the link to be active before
notifying downstream devices. On certain platforms with Broadcom switch
in synthetiic mode, switch responds with values even though the link is
not fully ready. The config space restoration done by pcie port driver
for SWUS/DS of dGPU is thus not effective as the switch is still doing
internal enumeration.
As a workaround, save state of SWUS/DS device in driver. Add additional
check to see if link is active and restore the values during DPC error
callbacks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Legacy resets reset the memory controllers so VRAM contents
may be unreliable after reset.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need the fw based discovery table for sysfs. No
need to parse it. Additionally parsing some of the board
specific tables may result in incorrect data on some boards.
just load the binary and don't parse it on those boards.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441
Fixes: 80a0e82829 ("drm/amdgpu/discovery: optionally use fw based ip discovery")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a struct to store unique id information for each type. Add helper
to fetch the unique id.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't allow hardware access while in dpc state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To get more context, add reset source to identify the source of gpu
recovery - job timeout, RAS, HWS hang etc.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the dpc status based on hardware state. Also, clear the status before
reinitialization after a successful reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use wrapper functions to set/indicate dpc status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On multi-vf setup if the VM have two vf assigned, perhaps from two
different gpus, mgpu fan boost will fail.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move amdgpu_device_health_check into amdgpu_device_gpu_recover to
ensure that if the device is present can be checked before reset
The reason is:
1.During the dpc event, the device where the dpc event occurs is not
present on the bus
2.When both dpc event and ATHUB event occur simultaneously,the dpc thread
holds the reset domain lock when detecting error,and the gpu recover thread
acquires the hive lock.The device is simultaneously in the states of
amdgpu_ras_in_recovery and occurs_dpc,so gpu recover thread will not go to
amdgpu_device_health_check.It waits for the reset domain lock held by the
dpc thread, but dpc thread has not released the reset domain lock.In the dpc
callback slot_reset,to obtain the hive lock, the hive lock is held by the
gpu recover thread at this time.So a deadlock occurred
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For kernel compute queues, align the timeout with
other kernel queues (10 sec). This had previously
been set higher for OpenCL when it used kernel
queues, but now OpenCL uses KFD user queues which
don't have a timeout limitation. This also aligns
with SR-IOV which already used a shorter timeout.
Additionally the longer timeout negatively impacts
the user experience with kernel queues for interactive
applications.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When hibernate with data center dGPUs, huge number of VRAM BOs evicted
to GTT and takes too much system memory. This will cause hibernation
fail due to insufficient memory for creating the hibernation image.
Move GTT BOs to shmem in KMD, then shmem to swap disk in kernel
hibernation code to make room for hibernation image.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-3-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Pass amdgpu device context instead of drm device context to some
amdgpu_device_* functions. DRM device context is not required in those
functions. No functional change.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cocci warnings: (new ones prefixed by >>)
>> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6088:8-9:
Unneeded variable: "r". Return "0" on line 6141
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506281925.HHIpXiO7-lkp@intel.com/
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert from generic DRM_* to dev_* calls to have device context info.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The update_partition_sched_list function does not
need to remain as a soc specific callback. It can
be reused for future products.
v2: bypass the function if xcp_mgr is not available (Likun)
v3: Let caller check the availability of xcp_mgr (Lijo)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the amdgpu fence container so we can store additional
data in the fence. This also fixes the start_time handling
for MCBP since we were casting the fence to an amdgpu_fence
and it wasn't.
Fixes: 3f4c175d62 ("drm/amdgpu: MCBP based on DRM scheduler (v9)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of unexpected errors, check if device is alive on the bus.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure to release reset domain lock in case of failures.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Fixes: 11bb33766f ("drm/amdgpu: refactor amdgpu_device_gpu_recover")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the suspend and resume process, exclusive access is not required.
Therefore, it can be moved out of the full access section to reduce the
duration of exclusive access.
v3:
Move suspend processes before hardware fini.
Remove twice call for bare metal.
v4:
Refine code
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
complete() callbacks are supposed to handle reversing anything
that occurred during prepare() callbacks. They'll be called on every
power state transition, and will also be called if the sequence is
failed (such as an aborted suspend).
Add support for IP blocks to support this action.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250602014432.3538345-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH is not working after switching a new gpu index for the first time.
During VM resume, QEMU programming of VF MSIX table (register GFXMSIX_VECT0_ADDR_LO)
may not work.The access could be blocked by nBIF protection as VF isn't in
exclusive access mode. Exclusive access is enabled now, disable/enable MSIX
so that QEMU reprograms MSIX table.
call amdgpu_restore_msix on resume to restore msix table.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV VM env with XGMI enabled systems, XGMI physical node id may
change when hibernate and resume with different VF.
Update XGMI info and vram_base_offset on resume for gfx444 SRIOV env.
Add amdgpu_virt_xgmi_migrate_enabled() as the feature flag.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To notify userspace about which task (if any) made the device get in a
wedge state, make use of drm_wedge_task_info parameter, filling it with
the task PID and name.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-7-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Don't enable BACO when in passthrough. PCI resets don't work
correctly when in BACO.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs nodes to provide compute paritition specific data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This notification may arrive in VF mailbox while polling for response from
another event.
This patches covers the following scenarios:
- If VF is already in RMA state, then do not attempt to contact the host.
Host will ignore the VF after sending the notification.
- If the notification is detected during polling, then set the RMA status,
and return error to caller.
- If the notification arrives by interrupt, then set the RMA status and
queue a reset. This reset will fail and VF will stop runtime services.
Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3a9626c816.
This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows. The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjusted the enforce isolation setting handling to include the ability
to disable the cleaner shader without affecting isolation between tasks.
v2: Updated enforce isolation documentation and parameters. (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_AMDGPU_NAVI3X_USERQ config support is not required for
usermode queue.
v2: rebase.
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since they will be used for both KFD and KGD user queues,
rename them from kfd to userq. No intended functional
change.
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unmap user queues on suspend and map them on resume.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch from a bool to an enum and allow more options
for enforce isolation. There are now 3 modes of operation:
- Disabled (0)
- Enabled (serialization and cleaner shader) (1)
- Enabled in legacy mode (no serialization or cleaner shader) (2)
This provides better flexibility for more use cases.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checking hive is more readable.
The following smatch warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:6820 amdgpu_pci_slot_reset()
warn: iterator used outside loop: 'tmp_adev'
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel doorbell BOs needs to be freed before ttm_fini.
Fixes: 54c30d2a8d ("drm/amdgpu: create kernel doorbell pages")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable ASPM with some ASICs on some specific platforms.
required from PCIe controller owner.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZ/akUAAKCRC93/aFa7yZ
2HtpAP9ptJj5RKxOcdh8lbiOZN3RGjxsqw6wXk7LUnw3A2npVAD5AXoaTis4S84e
0NIY7bd1Q1njP2akA4O5AKykkpgVtgw=
=Ha4H
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-fixes-6.15-2025-04-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-04-09:
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250409165238.1180153-1-alexander.deucher@amd.com
This is normally handled in the gfx IP suspend callbacks, but
for S0ix, those are skipped because we don't want to touch
gfx. So handle it in device suspend.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Fixes: 963537ca23 ("drm/amdgpu: add dynamic workload profile switching for gfx11")
Fixes: 5f95a15495 ("drm/amdgpu: add dynamic workload profile switching for gfx12")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 906ad45167)
Cc: stable@vger.kernel.org
So we can iterate across them when we need to manage
all user queues.
v2: add uq_mgr to adev list in amdgpu_userq_mgr_init
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove MES self test as this conflicts the userqueue fence
interrupts.
v2:(Christian)
- remove the amdgpu_mes_self_test() function and any now unused code.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to handle the userqueue protected fence signal hardware
interrupt.
Create a xarray which maps the doorbell index to the fence driver address.
This would help to retrieve the fence driver information when an userq fence
interrupt is triggered. Firmware sends the doorbell offset value and
this info is compared with the queue's mqd doorbell offset value.
If they are same, we process the userq fence interrupt.
v1:(Christian):
- use xa_load to extract the fence driver.
- move the amdgpu_userq_fence_driver_process call within the xa_lock
as there is a chance that fence_drv might be freed.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar
Alex Deucher
Yunxiang Li
Ce Sun
Dave Airlie
Samuel Zhang
Hawking Zhang
Emily Deng
Mario Limonciello
André Almeida
Ellen Pan
Srinivasan Shanmugam
Arvind Yadav
ZhenGuo Yin
Kenneth Feng
Arunpravin Paneer Selvam