Gh0st
/
linux
mirror of https://github.com/torvalds/linux.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
1,233,457 Commits 1 Branch 910 Tags 8.4 GiB
Commit Graph

536 Commits

Author SHA1 Message Date
Petr Tesarik 53c87e846e swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC 
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer.

Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/104a8c8fedffd1ff8a2890983e2ec1c26bff6810.camel@linux.ibm.com/
Fixes: 79636caad3 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-11-08 16:27:05 +01:00
Jia He a409d96009 dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM 
There is an unusual case that the range map covers right up to the top
of system RAM, but leaves a hole somewhere lower down. Then it prevents
the nvme device dma mapping in the checking path of phys_to_dma() and
causes the hangs at boot.

E.g. On an Armv8 Ampere server, the dsdt ACPI table is:
 Method (_DMA, 0, Serialized)  // _DMA: Direct Memory Access
            {
                Name (RBUF, ResourceTemplate ()
                {
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000000000000000, // Range Minimum
                        0x00000000FFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000000100000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000006010200000, // Range Minimum
                        0x000000602FFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x000000001FE00000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x00000060F0000000, // Range Minimum
                        0x00000060FFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000000010000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000007000000000, // Range Minimum
                        0x000003FFFFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000039000000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                })

But the System RAM ranges are:
cat /proc/iomem |grep -i ram
90000000-91ffffff : System RAM
92900000-fffbffff : System RAM
880000000-fffffffff : System RAM
8800000000-bff5990fff : System RAM
bff59d0000-bff5a4ffff : System RAM
bff8000000-bfffffffff : System RAM
So some RAM ranges are out of dma_range_map.

Fix it by checking whether each of the system RAM resources can be
properly encompassed within the dma_range_map.

Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-11-06 08:38:16 +01:00
Jia He 8ae0e97031 dma-mapping: move dma_addressing_limited() out of line 
This patch moves dma_addressing_limited() out of line, serving as a
preliminary step to prevent the introduction of a new publicly accessible
low-level helper when validating whether all system RAM is mapped within
the DMA mapping range.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-11-06 08:35:09 +01:00
Petr Tesarik a5e3b12745 swiotlb: do not free decrypted pages if dynamic 
Fix these two error paths:

1. When set_memory_decrypted() fails, pages may be left fully or partially
   decrypted.

2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the
   physical address is too high.

To fix the first issue, call set_memory_encrypted() on the allocated region
after a failed decryption attempt. If that also fails, leak the pages.

To fix the second issue, check that the TLB physical address is below the
requested limit before decrypting.

Let the caller differentiate between unsuitable physical address (=> retry
from a lower zone) and allocation failures (=> no point in retrying).

Cc: stable@vger.kernel.org
Fixes: 79636caad3 ("swiotlb: if swiotlb is full, fall back to a transient memory pool")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-11-03 09:33:45 +01:00
Linus Torvalds 009fbfc97b dma-mapping updates for Linux 6.7 
- get rid of the fake support for coherent DMA allocation on coldfire with
    caches (Christoph Hellwig)
  - add a few Kconfig dependencies so that Kconfig catches the use of
    invalid configurations (Christoph Hellwig)
  - fix a type in dma-debug output (Chuck Lever)
  - rewrite a comment in swiotlb (Sean Christopherson)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmU/t/8LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNRsA/9GurDhfwje9qOaMIOfrmrB+mppEJ67pi0dgAXKgGN
 HpZJwHEJCoM3zrAmvq58tCCI4r8kOjqkfKkPZNHaqSLF+fAPzI7YhSD+Y28GClM4
 cutrYovJVGeOTXJMwINMRo/r6n3nBZ4fG17YflGnuZHL27H7+dmaxwXusLvwBTwv
 7rFr8WRuqEpnMb7OktHIG9fnsy6oxWNhxBvG8Vu93yiZqprv3xbhI/BaRaOtZM2W
 zQA7OqM5YxQCH5gNnfcx25f5bkfkDoxUYh8gDd4JSwTUJz0ZlIL8/ROPJScjpFvh
 M3ur/NXdFfaqfDYWzO40wxmF6N0moHLvppOaEzM/tmGvtZBzqKmpNCkVBQCoxNAS
 1jwW4kh1ZhoW4RbPEKX6kcfJjn97o+RE9pY5t956a9sDd3DBqPNaPIOqlwmeB8Sd
 bh2ekwuNmxwsZXqTv5c5vvN4a95RNhZMvS2ma9o6lnsLTaeog7x4mnU0cf69tQuT
 850JexGcM0fzD2nMqrmfyyLgUjPN6k+Z71Ay6FiTWjnK4mLRN8zmVgF8tXtQuexH
 4HAJ70LJ2OxfEkW5nD3yUc2S/RwyVR6HeGG9bciYQbob3hqb4glzALNpB9C02Cf1
 /iOwAMdUgsj4MYaeOOwk2u3+ZMsuF3DlaoJ+8Gr/M60C92SCkMAYIYJDh61b6qk1
 i04=
 =D8Eq
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - get rid of the fake support for coherent DMA allocation on coldfire
   with caches (Christoph Hellwig)

 - add a few Kconfig dependencies so that Kconfig catches the use of
   invalid configurations (Christoph Hellwig)

 - fix a type in dma-debug output (Chuck Lever)

 - rewrite a comment in swiotlb (Sean Christopherson)

* tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: Fix a typo in a debugging eye-catcher
  swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
  m68k: remove unused includes from dma.c
  m68k: don't provide arch_dma_alloc for nommu/coldfire
  net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
  m68k: use the coherent DMA code for coldfire without data cache
  dma-direct: warn when coherent allocations aren't supported
  dma-direct: simplify the use atomic pool logic in dma_direct_alloc
  dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
  dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL
 2023-11-01 13:15:54 -10:00
Petr Tesarik d5090484b0 swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages 
When allocating a new pool at runtime, reduce the number of slabs so
that the allocation order is at most MAX_ORDER.  This avoids a kernel
warning in __alloc_pages().

The warning is relatively benign, because the pool size is subsequently
reduced when allocation fails, but it is silly to start with a request
that is known to fail, especially since this is the default behavior if
the kernel is built with CONFIG_SWIOTLB_DYNAMIC=y and booted without any
swiotlb= parameter.

Reported-by: Ben Greear <greearb@candelatech.com>
Closes: https://lore.kernel.org/netdev/4f173dd2-324a-0240-ff8d-abf5c191be18@candelatech.com/
Fixes: 1aaa736815 ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-10-25 16:26:20 +02:00
Chuck Lever 36d91e8515 dma-debug: Fix a typo in a debugging eye-catcher 
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-10-23 07:52:54 +02:00
Sean Christopherson 1132a1dc05 swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE 
Rewrite the comment explaining why swiotlb copies the original buffer to
the TLB buffer before initiating DMA *from* the device, i.e. before the
device DMAs into the TLB buffer.  The existing comment's argument that
preserving the original data can prevent a kernel memory leak is bogus.

If the driver that triggered the mapping _knows_ that the device will
overwrite the entire mapping, or the driver will consume only the written
parts, then copying from the original memory is completely pointless.

If neither of the above holds true, then copying from the original adds
value only if preserving the data is necessary for functional
correctness, or the driver explicitly initialized the original memory.
If the driver didn't initialize the memory, then copying the original
buffer to the TLB buffer simply changes what kernel data is leaked to
user space.

Writing the entire TLB buffer _does_ prevent leaking stale TLB buffer
data from a previous bounce, but that can be achieved by simply zeroing
the TLB buffer when grabbing a slot.

The real reason swiotlb ended up initializing the TLB buffer with the
original buffer is that it's necessary to make swiotlb operate as
transparently as possible, i.e. to behave as closely as possible to
hardware, and to avoid corrupting the original buffer, e.g. if the driver
knows the device will do partial writes and is relying on the unwritten
data to be preserved.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/all/ZN5elYQ5szQndN8n@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-10-23 07:51:36 +02:00
Christoph Hellwig 63f067e33c dma-direct: warn when coherent allocations aren't supported 
Log a warning once when dma_alloc_coherent fails because the platform
does not support coherent allocations at all.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
 2023-10-22 16:38:54 +02:00
Christoph Hellwig b1da46d70e dma-direct: simplify the use atomic pool logic in dma_direct_alloc 
The logic in dma_direct_alloc when to use the atomic pool vs remapping
grew a bit unreadable.  Consolidate it into a single check, and clean
up the set_uncached vs remap logic a bit as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
 2023-10-22 16:38:54 +02:00
Christoph Hellwig 2c8ed1b960 dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol 
Instead of using arch_dma_alloc if none of the generic coherent
allocators are used, require the architectures to explicitly opt into
providing it.  This will used to deal with the case of m68knommu and
coldfire where we can't do any coherent allocations whatsoever, and
also makes it clear that arch_dma_alloc is a last resort.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
 2023-10-22 16:38:54 +02:00
Christoph Hellwig da323d4640 dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL 
CONFIG_DMA_GLOBAL_POOL can't be combined with other DMA coherent
allocators.  Add dependencies to Kconfig to document this, and make
kconfig complain about unmet dependencies if someone tries.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
 2023-10-22 16:38:02 +02:00
Petr Tesarik 2d5780bbef swiotlb: fix the check whether a device has used software IO TLB 
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB
can avoid swiotlb lookup. A flag is added by commit 1395706a14 ("swiotlb:
search the software IO TLB only if the device makes use of it"), the flag
is correctly set, but it is then never checked. Add the actual check here.

Note that this code is an alternative to the default pool check, not an
additional check, because:

1. swiotlb_find_pool() also searches the default pool;
2. if dma_uses_io_tlb is false, the default swiotlb pool is not used.

Tested in a KVM guest against a QEMU RAM-backed SATA disk over virtio and
*not* using software IO TLB, this patch increases IOPS by approx 2% for
4-way parallel I/O.

The write memory barrier in swiotlb_dyn_alloc() is not needed, because a
newly allocated pool must always be observed by swiotlb_find_slots() before
an address from that pool is passed to is_swiotlb_buffer().

Correctness was verified using the following litmus test:

C swiotlb-new-pool

(*
 * Result: Never
 *
 * Check that a newly allocated pool is always visible when the
 *  corresponding swiotlb buffer is visible.
 *)

{
	mem_pools = default;
}

P0(int **mem_pools, int *pool)
{
	/* add_mem_pool() */
	WRITE_ONCE(*pool, 999);
	rcu_assign_pointer(*mem_pools, pool);
}

P1(int **mem_pools, int *flag, int *buf)
{
	/* swiotlb_find_slots() */
	int *r0;
	int r1;

	rcu_read_lock();
	r0 = READ_ONCE(*mem_pools);
	r1 = READ_ONCE(*r0);
	rcu_read_unlock();

	if (r1) {
		WRITE_ONCE(*flag, 1);
		smp_mb();
	}

	/* device driver (presumed) */
	WRITE_ONCE(*buf, r1);
}

P2(int **mem_pools, int *flag, int *buf)
{
	/* device driver (presumed) */
	int r0 = READ_ONCE(*buf);

	/* is_swiotlb_buffer() */
	int r1;
	int *r2;
	int r3;

	smp_rmb();
	r1 = READ_ONCE(*flag);
	if (r1) {
		/* swiotlb_find_pool() */
		rcu_read_lock();
		r2 = READ_ONCE(*mem_pools);
		r3 = READ_ONCE(*r2);
		rcu_read_unlock();
	}
}

exists (2:r0<>0 /\ 2:r3=0) (* Not found. *)

Fixes: 1395706a14 ("swiotlb: search the software IO TLB only if the device makes use of it")
Reported-by: Jonathan Corbet <corbet@lwn.net>
Closes: https://lore.kernel.org/linux-iommu/87a5uz3ob8.fsf@meer.lwn.net/
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-09-27 11:19:15 +02:00
Ross Lagerwall a6a241764f swiotlb: use the calculated number of areas 
Commit 8ac0406335 ("swiotlb: reduce the number of areas to match
actual memory pool size") calculated the reduced number of areas in
swiotlb_init_remap() but didn't actually use the value. Replace usage of
default_nareas accordingly.

Fixes: 8ac0406335 ("swiotlb: reduce the number of areas to match actual memory pool size")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-09-13 09:13:15 -03:00
Zhenhua Huang f875db4f20 Revert "dma-contiguous: check for memory region overlap" 
This reverts commit 3fa6456ebe.

The Commit broke the CMA region creation through DT on arm64,
as showed below logs with "memblock=debug":
[    0.000000] memblock_phys_alloc_range: 41943040 bytes align=0x200000
from=0x0000000000000000 max_addr=0x00000000ffffffff
early_init_dt_alloc_reserved_memory_arch+0x34/0xa0
[    0.000000] memblock_reserve: [0x00000000fd600000-0x00000000ffdfffff]
memblock_alloc_range_nid+0xc0/0x19c
[    0.000000] Reserved memory: overlap with other memblock reserved region

>From call flow, region we defined in DT was always reserved before entering
into rmem_cma_setup. Also, rmem_cma_setup has one routine cma_init_reserved_mem
to ensure the region was reserved. Checking the region not reserved here seems
not correct.

early_init_fdt_scan_reserved_mem:
    fdt_scan_reserved_mem
        __reserved_mem_reserve_reg
		early_init_dt_reserve_memory
			memblock_reserve(using “reg” prop case)
        fdt_init_reserved_mem
		__reserved_mem_alloc_size
			*early_init_dt_alloc_reserved_memory_arch*
				memblock_reserve(dynamic alloc case)
        __reserved_mem_init_node
		rmem_cma_setup(region overlap check here should always fail)

Example DT can be used to reproduce issue:

    dump_mem: mem_dump_region {
            compatible = "shared-dma-pool";
            alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
            reusable;
            size = <0 0x2800000>;
    };

Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
 2023-09-08 05:58:32 -03:00
Christoph Hellwig 765aa6b3a4 dma-pool: remove a __maybe_unused label in atomic_pool_expand 
Move the #endif a line so that free_page label is only seen by the
compile pass when actually used.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chunhui He <hchunhui@mail.ustc.edu.cn>
Reviewed-by: Robin Murphy <roin.murphy@arm.com>
 2023-08-31 14:12:37 +02:00
Christoph Hellwig 2dcdf8c18d dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA 
It makes no sense to expose CONFIG_DMA_NUMA_CMA if CONFIG_NUMA is not
enabled, and random config options shouldn't be default unless there
is a good reason.  Replace the default NUMA with a depends on to fix both
issues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <roin.murphy@arm.com>
 2023-08-30 13:52:53 +02:00
Sergey Senozhatsky fb5a431559 dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock 
__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.

Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.

Trimmed-down lockdep splat:

 The existing dependency chain (in reverse order) is:

               -> #2 (free_entries_lock){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        dma_entry_alloc+0x38/0x110
        debug_dma_map_page+0x60/0xf8
        dma_map_page_attrs+0x1e0/0x230
        dma_map_single_attrs.constprop.0+0x6c/0xc8
        geni_se_rx_dma_prep+0x40/0xcc
        qcom_geni_serial_isr+0x310/0x510
        __handle_irq_event_percpu+0x110/0x244
        handle_irq_event_percpu+0x20/0x54
        handle_irq_event+0x50/0x88
        handle_fasteoi_irq+0xa4/0xcc
        handle_irq_desc+0x28/0x40
        generic_handle_domain_irq+0x24/0x30
        gic_handle_irq+0xc4/0x148
        do_interrupt_handler+0xa4/0xb0
        el1_interrupt+0x34/0x64
        el1h_64_irq_handler+0x18/0x24
        el1h_64_irq+0x64/0x68
        arch_local_irq_enable+0x4/0x8
        ____do_softirq+0x18/0x24
        ...

               -> #1 (&port_lock_key){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        qcom_geni_serial_console_write+0x184/0x1dc
        console_flush_all+0x344/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        register_console+0x230/0x38c
        uart_add_one_port+0x338/0x494
        qcom_geni_serial_probe+0x390/0x424
        platform_probe+0x70/0xc0
        really_probe+0x148/0x280
        __driver_probe_device+0xfc/0x114
        driver_probe_device+0x44/0x100
        __device_attach_driver+0x64/0xdc
        bus_for_each_drv+0xb0/0xd8
        __device_attach+0xe4/0x140
        device_initial_probe+0x1c/0x28
        bus_probe_device+0x44/0xb0
        device_add+0x538/0x668
        of_device_add+0x44/0x50
        of_platform_device_create_pdata+0x94/0xc8
        of_platform_bus_create+0x270/0x304
        of_platform_populate+0xac/0xc4
        devm_of_platform_populate+0x60/0xac
        geni_se_probe+0x154/0x160
        platform_probe+0x70/0xc0
        ...

               -> #0 (console_owner){-...}-{0:0}:
        __lock_acquire+0xdf8/0x109c
        lock_acquire+0x234/0x284
        console_flush_all+0x330/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        dma_entry_alloc+0xb4/0x110
        debug_dma_map_sg+0xdc/0x2f8
        __dma_map_sg_attrs+0xac/0xe4
        dma_map_sgtable+0x30/0x4c
        get_pages+0x1d4/0x1e4 [msm]
        msm_gem_pin_pages_locked+0x38/0xac [msm]
        msm_gem_pin_vma_locked+0x58/0x88 [msm]
        msm_ioctl_gem_submit+0xde4/0x13ac [msm]
        drm_ioctl_kernel+0xe0/0x15c
        drm_ioctl+0x2e8/0x3f4
        vfs_ioctl+0x30/0x50
        ...

 Chain exists of:
   console_owner --> &port_lock_key --> free_entries_lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(free_entries_lock);
                                lock(&port_lock_key);
                                lock(free_entries_lock);
   lock(console_owner);

                *** DEADLOCK ***

 Call trace:
  dump_backtrace+0xb4/0xf0
  show_stack+0x20/0x30
  dump_stack_lvl+0x60/0x84
  dump_stack+0x18/0x24
  print_circular_bug+0x1cc/0x234
  check_noncircular+0x78/0xac
  __lock_acquire+0xdf8/0x109c
  lock_acquire+0x234/0x284
  console_flush_all+0x330/0x454
  console_unlock+0x94/0xf0
  vprintk_emit+0x238/0x24c
  vprintk_default+0x3c/0x48
  vprintk+0xb4/0xbc
  _printk+0x68/0x90
  dma_entry_alloc+0xb4/0x110
  debug_dma_map_sg+0xdc/0x2f8
  __dma_map_sg_attrs+0xac/0xe4
  dma_map_sgtable+0x30/0x4c
  get_pages+0x1d4/0x1e4 [msm]
  msm_gem_pin_pages_locked+0x38/0xac [msm]
  msm_gem_pin_vma_locked+0x58/0x88 [msm]
  msm_ioctl_gem_submit+0xde4/0x13ac [msm]
  drm_ioctl_kernel+0xe0/0x15c
  drm_ioctl+0x2e8/0x3f4
  vfs_ioctl+0x30/0x50
  ...

Reported-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-30 11:29:08 +02:00
Petr Tesarik d069ed288a swiotlb: optimize get_max_slots() 
Use a simple logical shift and increment to calculate the number of slots
taken by the DMA segment boundary.

At least GCC-13 is not able to optimize the expression, producing this
horrible assembly code on x86:

	cmpq	$-1, %rcx
	je	.L364
	addq	$2048, %rcx
	shrq	$11, %rcx
	movq	%rcx, %r13
.L331:
	// rest of the function here...

	// after function epilogue and return:
.L364:
	movabsq $9007199254740992, %r13
	jmp	.L331

After the optimization, the code looks more reasonable:

	shrq	$11, %r11
	leaq	1(%r11), %rbx

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-08 10:29:21 -07:00
Petr Tesarik f94cb36e76 swiotlb: move slot allocation explanation comment where it belongs 
Move the comment down in front of the loop that actually sets the list
member of struct io_tlb_slot to zero.

Fixes: 26a7e09478 ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-08 10:29:06 -07:00
Petr Tesarik 1395706a14 swiotlb: search the software IO TLB only if the device makes use of it 
Skip searching the software IO TLB if a device has never used it, making
sure these devices are not affected by the introduction of multiple IO TLB
memory pools.

Additional memory barrier is required to ensure that the new value of the
flag is visible to other CPUs after mapping a new bounce buffer. For
efficiency, the flag check should be inlined, and then the memory barrier
must be moved to is_swiotlb_buffer(). However, it can replace the existing
barrier in swiotlb_find_pool(), because all callers use is_swiotlb_buffer()
first to verify that the buffer address belongs to the software IO TLB.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:32 +02:00
Petr Tesarik 1aaa736815 swiotlb: allocate a new memory pool when existing pools are full 
When swiotlb_find_slots() cannot find suitable slots, schedule the
allocation of a new memory pool. It is not possible to allocate the pool
immediately, because this code may run in interrupt context, which is not
suitable for large memory allocations. This means that the memory pool will
be available too late for the currently requested mapping, but the stress
on the software IO TLB allocator is likely to continue, and subsequent
allocations will benefit from the additional pool eventually.

Keep all memory pools for an allocator in an RCU list to avoid locking on
the read side. For modifications, add a new spinlock to struct io_tlb_mem.

The spinlock also protects updates to the total number of slabs (nslabs in
struct io_tlb_mem), but not reads of the value. Readers may therefore
encounter a stale value, but this is not an issue:

- swiotlb_tbl_map_single() and is_swiotlb_active() only check for non-zero
  value. This is ensured by the existence of the default memory pool,
  allocated at boot.

- The exact value is used only for non-critical purposes (debugfs, kernel
  messages).

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:27 +02:00
Petr Tesarik ad96ce3252 swiotlb: determine potential physical address limit 
The value returned by default_swiotlb_limit() should be constant, because
it is used to decide whether DMA can be used. To allow allocating memory
pools on the fly, use the maximum possible physical address rather than the
highest address used by the default pool.

For swiotlb_init_remap(), this is either an arch-specific limit used by
memblock_alloc_low(), or the highest directly mapped physical address if
the initialization flags include SWIOTLB_ANY. For swiotlb_init_late(), the
highest address is determined by the GFP flags.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:24 +02:00
Petr Tesarik 79636caad3 swiotlb: if swiotlb is full, fall back to a transient memory pool 
Try to allocate a transient memory pool if no suitable slots can be found
and the respective SWIOTLB is allowed to grow. The transient pool is just
enough big for this one bounce buffer. It is inserted into a per-device
list of transient memory pools, and it is freed again when the bounce
buffer is unmapped.

Transient memory pools are kept in an RCU list. A memory barrier is
required after adding a new entry, because any address within a transient
buffer must be immediately recognized as belonging to the SWIOTLB, even if
it is passed to another CPU.

Deletion does not require any synchronization beyond RCU ordering
guarantees. After a buffer is unmapped, its physical addresses may no
longer be passed to the DMA API, so the memory range of the corresponding
stale entry in the RCU list never matches. If the memory range gets
allocated again, then it happens only after a RCU quiescent state.

Since bounce buffers can now be allocated from different pools, add a
parameter to swiotlb_alloc_pool() to let the caller know which memory pool
is used. Add swiotlb_find_pool() to find the memory pool corresponding to
an address. This function is now also used by is_swiotlb_buffer(), because
a simple boundary check is no longer sufficient.

The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(),
simplified and enhanced to use coherent memory pools if needed.

Note that this is not the most efficient way to provide a bounce buffer,
but when a DMA buffer can't be mapped, something may (and will) actually
break. At that point it is better to make an allocation, even if it may be
an expensive operation.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:20 +02:00
Petr Tesarik 62708b2ba4 swiotlb: add a flag whether SWIOTLB is allowed to grow 
Add a config option (CONFIG_SWIOTLB_DYNAMIC) to enable or disable dynamic
allocation of additional bounce buffers.

If this option is set, mark the default SWIOTLB as able to grow and
restricted DMA pools as unable.

However, if the address of the default memory pool is explicitly queried,
make the default SWIOTLB also unable to grow. This is currently used to set
up PCI BAR movable regions on some Octeon MIPS boards which may not be able
to use a SWIOTLB pool elsewhere in physical memory. See octeon_pci_setup()
for more details.

If a remap function is specified, it must be also called on any dynamically
allocated pools, but there are some issues:

- The remap function may block, so it should not be called from an atomic
  context.
- There is no corresponding unremap() function if the memory pool is
  freed.
- The only in-tree implementation (xen_swiotlb_fixup) requires that the
  number of slots in the memory pool is a multiple of SWIOTLB_SEGSIZE.

Keep it simple for now and disable growing the SWIOTLB if a remap function
was specified.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:17 +02:00
Petr Tesarik 158dbe9c9a swiotlb: separate memory pool data from other allocator data 
Carve out memory pool specific fields from struct io_tlb_mem. The original
struct now contains shared data for the whole allocator, while the new
struct io_tlb_pool contains data that is specific to one memory pool of
(potentially) many.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:14 +02:00
Petr Tesarik fea18777a7 swiotlb: add documentation and rename swiotlb_do_find_slots() 
Add some kernel-doc comments and move the existing documentation of struct
io_tlb_slot to its correct location. The latter was forgotten in commit
942a8186eb ("swiotlb: move struct io_tlb_slot to swiotlb.c").

Use the opportunity to give swiotlb_do_find_slots() a more descriptive name
and make it clear how it differs from swiotlb_find_slots().

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:12 +02:00
Petr Tesarik 05ee774122 swiotlb: make io_tlb_default_mem local to swiotlb.c 
SWIOTLB implementation details should not be exposed to the rest of the
kernel. This will allow to make changes to the implementation without
modifying non-swiotlb code.

To avoid breaking existing users, provide helper functions for the few
required fields.

As a bonus, using a helper function to initialize struct device allows to
get rid of an #ifdef in driver core.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:09 +02:00
Petr Tesarik 0c6874a6ac swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated 
If swiotlb is allocated, immediately return 0, so callers do not have to
check io_tlb_default_mem.nslabs explicitly.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-08-01 18:02:02 +02:00
Binglei Wang 3fa6456ebe dma-contiguous: check for memory region overlap 
In the process of parsing the DTS, check whether the memory region
specified by the DTS CMA node area overlaps with the kernel text
memory space reserved by memblock before calling
early_init_fdt_scan_reserved_mem.

Signed-off-by: Binglei Wang <l3b2w1@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-07-31 17:54:56 +02:00
Yajun Deng bf29bfaa54 dma-contiguous: support numa CMA for specified node 
The kernel parameter 'cma_pernuma=' only supports reserving the same
size of CMA area for each node. We need to reserve different sizes of
CMA area for specified nodes if these devices belong to different nodes.

Adding another kernel parameter 'numa_cma=' to reserve CMA area for
the specified node. If we want to use one of these parameters, we need to
enable DMA_NUMA_CMA.

At the same time, print the node id in cma_declare_contiguous_nid() if
CONFIG_NUMA is enabled.

Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-07-31 17:54:29 +02:00
Yajun Deng 22e4a348f8 dma-contiguous: support per-numa CMA for all architectures 
In the commit b7176c261c ("dma-contiguous: provide the ability to
reserve per-numa CMA"), Barry adds DMA_PERNUMA_CMA for ARM64.

But this feature is architecture independent, so support per-numa CMA
for all architectures, and enable it by default if NUMA.

Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-07-31 17:54:28 +02:00
Arnd Bergmann 3d6f126b15 dma-mapping: move arch_dma_set_mask() declaration to header 
This function has a __weak definition and an override that is only used on
freescale powerpc chips. The powerpc definition however does not see the
declaration that is in a .c file:

arch/powerpc/kernel/dma-mask.c:7:6: error: no previous prototype for 'arch_dma_set_mask' [-Werror=missing-prototypes]

Move it into the linux/dma-map-ops.h header where the other arch_dma_* functions
are declared.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-07-31 17:54:28 +02:00
Christoph Hellwig 42e584a985 swiotlb: unexport is_swiotlb_active 
Drivers have no business looking at dma-mapping or swiotlb internals.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
 2023-07-31 17:54:27 +02:00
Linus Torvalds f71f64210d dma-mapping fixes for Linux 6.5 
- swiotlb area sizing fixes (Petr Tesarik)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmSq57sLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOh0xAAkwklIxxzXvNlgjvy2hdgPWImPS8tGPDSIsqA9TDD
 WDZq89nz/ndnchdPObDvyJXmfBgqa0qCHqopBVPqMKv5a1pKZhrRXYlbajGQQwji
 MIqefTLZ/VGw7bDpEivOt+yadwQ3KxuxWWs7/JPKLLReSJ22H8P+jkrK7P7kBL5X
 YaMtZG9d86fvFHnQHKdAOlF1iCvnoZDHPcvaZbI6m5mMSZ+HIYqK5pP1MTUEAbIU
 MX4ZSI7/mL0q67+kZuM/NCSeq1pH0Cd0D2DGm+8k/y87G81GS6E5Wgg+xO7vYiXf
 5ChuwlAO9K9KhH7NIRkKhkad/Ii89ENXSyv5gmPRoKYK5FXajnHSlJTUrZojV6XC
 Pbsd9ATVzV0rY61EPyh6G1a+Ttp/pwMp+W0I2fi032GVAePQ/vhB9x9O+2O/3QiC
 v80nUSatkciZncWqkguhp3NONsRmLKep3CCQnEAA/gLs27B0avdQeslnqbOOUQKd
 Si+djIoel8ONjQ+mW8eFCsVYMH1xFSo0aGsgGe0y2cyBE3DN1AW9eRnOXWT4C1PR
 UyDlx8ACs87ojec+YRQFYk2/PbsU7CQiH1pteXvBHcbhiVUAvrtXtg6ANQ+7066P
 IIduAZmlHcHb1BhyrSQbAtRllVLIp/l9IAkCSY9SvL0tjh/B5CaRBD5m2Taow5I/
 KUI=
 =4Lfc
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:

 - swiotlb area sizing fixes (Petr Tesarik)

* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: reduce the number of areas to match actual memory pool size
  swiotlb: always set the number of areas before allocating the pool
 2023-07-09 10:24:22 -07:00
Linus Torvalds 1e6d5dea34 dma-mapping uodates for Linux 6.5 
- swiotlb cleanups (Petr Tesarik)
  - use kvmalloc_array (gaoxu)
  - a small step towards removing is_swiotlb_active (Christoph Hellwig)
  - fix a Kconfig typo Sui Jingfeng)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmScHTELHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOoGhAAuKdcWAumhEuKXu/vuA4/xH5Kvn2uhrAVs/RSKKh7
 Wbh2WXh+9GOQs4dwpYI5/chRmCJgyC2ics/E7dny2ovJumM/RGOR9zff/+zJk5yh
 3tpiZ4VW/2x/9qmoRpdQVTaj1uB2Ug8wpztUohyeEYPpjLX0/Vq/zTItAyvQs4kO
 vskg2u9EGwzgV4qmHWq2fjowljHS1sMZq2URKGX8JDHrwOh0+uCke626ze/WznSQ
 5quWW4mE0IYq/nldIMTvJxUx6273zBMm+yoZSfFY6K0VrP3WDE5endP5oYR7d251
 zNRPyWqW78HQT0z/gntaPOKDB0t7YxsWVLwam98Yv8wl1wLJQYe5sRoL7qXL0yBz
 cu4uTOGU6Kvw3ZHWQOk2qkGxYAxDLnaFejz8ZDCycWQA7T2+TNdaVXNnl/vE+aRN
 25mnT0JtClfZOvHihhHKaiRXMKE0WgPy4vBZBT0SAUVuUR7JwtYDv/5giGf6Bi3x
 QwNeXAmFD75VELJoqX1KL/UiJh8FzyWZMI7l7XmDVy9lJsA1P3PO+npI8SOmA+e8
 q4GSD36BxDoDE06Hg/BQcRqPohDCEsrRgfvOaa7xld9SCwe1lGaN3kDsyv6HoBzX
 NRS3aishdqHf21dNctjX9f+II+30NFkPbAa64B8L4tP5aQLy3bgjNLweLP9fhKgl
 KQs=
 =yYCS
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - swiotlb cleanups (Petr Tesarik)

 - use kvmalloc_array (gaoxu)

 - a small step towards removing is_swiotlb_active (Christoph Hellwig)

 - fix a Kconfig typo Sui Jingfeng)

* tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping:
  drm/nouveau: stop using is_swiotlb_active
  swiotlb: use the atomic counter of total used slabs if available
  swiotlb: remove unused field "used" from struct io_tlb_mem
  dma-remap: use kvmalloc_array/kvfree for larger dma memory remap
  dma-mapping: fix a Kconfig typo
 2023-06-29 21:12:20 -07:00
Petr Tesarik 8ac0406335 swiotlb: reduce the number of areas to match actual memory pool size 
Although the desired size of the SWIOTLB memory pool is increased in
swiotlb_adjust_nareas() to match the number of areas, the actual allocation
may be smaller, which may require reducing the number of areas.

For example, Xen uses swiotlb_init_late(), which in turn uses the page
allocator. On x86, page size is 4 KiB and MAX_ORDER is 10 (1024 pages),
resulting in a maximum memory pool size of 4 MiB. This corresponds to 2048
slots of 2 KiB each. The minimum area size is 128 (IO_TLB_SEGSIZE),
allowing at most 2048 / 128 = 16 areas.

If num_possible_cpus() is greater than the maximum number of areas, areas
are smaller than IO_TLB_SEGSIZE and contiguous groups of free slots will
span multiple areas. When allocating and freeing slots, only one area will
be properly locked, causing race conditions on the unlocked slots and
ultimately data corruption, kernel hangs and crashes.

Fixes: 20347fca71 ("swiotlb: split up the global swiotlb lock")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-06-29 07:10:28 +02:00
Petr Tesarik aabd12609f swiotlb: always set the number of areas before allocating the pool 
The number of areas defaults to the number of possible CPUs. However, the
total number of slots may have to be increased after adjusting the number
of areas. Consequently, the number of areas must be determined before
allocating the memory pool. This is even explained with a comment in
swiotlb_init_remap(), but swiotlb_init_late() adjusts the number of areas
after slots are already allocated. The areas may end up being smaller than
IO_TLB_SEGSIZE, which breaks per-area locking.

While fixing swiotlb_init_late(), move all relevant comments before the
definition of swiotlb_adjust_nareas() and convert them to kernel-doc.

Fixes: 20347fca71 ("swiotlb: split up the global swiotlb lock")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-06-29 07:10:00 +02:00
Catalin Marinas 370645f41e dma-mapping: force bouncing if the kmalloc() size is not cache-line-aligned 
For direct DMA, if the size is small enough to have originated from a
kmalloc() cache below ARCH_DMA_MINALIGN, check its alignment against
dma_get_cache_alignment() and bounce if necessary.  For larger sizes, it
is the responsibility of the DMA API caller to ensure proper alignment.

At this point, the kmalloc() caches are properly aligned but this will
change in a subsequent patch.

Architectures can opt in by selecting DMA_BOUNCE_UNALIGNED_KMALLOC.

Link: https://lkml.kernel.org/r/20230612153201.554742-15-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-06-19 16:19:23 -07:00
Robin Murphy cb147bbe22 dma-mapping: name SG DMA flag helpers consistently 
sg_is_dma_bus_address() is inconsistent with the naming pattern of its
corresponding setters and its own kerneldoc, so take the majority vote and
rename it sg_dma_is_bus_address() (and fix up the missing underscores in
the kerneldoc too).  This gives us a nice clear pattern where SG DMA flags
are SG_DMA_<NAME>, and the helpers for acting on them are
sg_dma_<action>_<name>().

Link: https://lkml.kernel.org/r/20230612153201.554742-14-catalin.marinas@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
  Link: https://lore.kernel.org/r/fa2eca2862c7ffc41b50337abffb2dfd2864d3ea.1685036694.git.robin.murphy@arm.com
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-06-19 16:19:22 -07:00
Robin Murphy af2880ec44 scatterlist: add dedicated config for DMA flags 
The DMA flags field will be useful for users beyond PCI P2P, so upgrade to
its own dedicated config option.

[catalin.marinas@arm.com: use #ifdef CONFIG_NEED_SG_DMA_FLAGS in scatterlist.h]
[catalin.marinas@arm.com: update PCI_P2PDMA dma_flags comment in scatterlist.h]
Link: https://lkml.kernel.org/r/20230612153201.554742-13-catalin.marinas@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2023-06-19 16:19:22 -07:00
Petr Tesarik 693405cf11 swiotlb: use the atomic counter of total used slabs if available 
If DEBUG_FS is enabled, the cost of keeping an exact number of total
used slabs is already paid. In this case, there is no reason to use an
inexact number for statistics and kernel messages.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-06-07 15:06:40 +02:00
gaoxu 51ff97d54f dma-remap: use kvmalloc_array/kvfree for larger dma memory remap 
If dma_direct_alloc() alloc memory in size of 64MB, the inner function
dma_common_contiguous_remap() will allocate 128KB memory by invoking
the function kmalloc_array(). and the kmalloc_array seems to fail to try to
allocate 128KB mem.

Call trace:
[14977.928623] qcrosvm: page allocation failure: order:5, mode:0x40cc0
[14977.928638] dump_backtrace.cfi_jt+0x0/0x8
[14977.928647] dump_stack_lvl+0x80/0xb8
[14977.928652] warn_alloc+0x164/0x200
[14977.928657] __alloc_pages_slowpath+0x9f0/0xb4c
[14977.928660] __alloc_pages+0x21c/0x39c
[14977.928662] kmalloc_order+0x48/0x108
[14977.928666] kmalloc_order_trace+0x34/0x154
[14977.928668] __kmalloc+0x548/0x7e4
[14977.928673] dma_direct_alloc+0x11c/0x4f8
[14977.928678] dma_alloc_attrs+0xf4/0x138
[14977.928680] gh_vm_ioctl_set_fw_name+0x3c4/0x610 [gunyah]
[14977.928698] gh_vm_ioctl+0x90/0x14c [gunyah]
[14977.928705] __arm64_sys_ioctl+0x184/0x210

work around by doing kvmalloc_array instead.

Signed-off-by: Gao Xu <gaoxu2@hihonor.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-06-07 15:06:28 +02:00
Sui Jingfeng 4d3af20eaf dma-mapping: fix a Kconfig typo 
'thing' -> 'think'

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-06-07 15:06:09 +02:00
Linus Torvalds b28e6315a0 dma-mapping updates for Linux 6.4 
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
  - clean up the coherency defaul initialiation (Jiaxun Yang)
  - add cacheline to user/kernel dma-debug space dump messages
    (Desnes Nunes, Geert Uytterhoeve)
  - swiotlb statistics improvements (Michael Kelley)
  - misc cleanups (Petr Tesarik)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmRLYsoLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYP4+RAAwpIqI198CrPxodCuBdwetuxznwncdwFvU3W+NQLF
 cC5gDeUB2ZZevVh3moKITV7gXHrbTJF7jQs9jpWV0QEA5APzu0WDf3Y0m4sXPVpn
 E9jS3jGJyntZ9rIMzHFs/lguI37xzT1YRAHAYgoZ84b7K/9g94NgEE2HecfNKVqZ
 D6PN0UJcA4KQo+5UJ7MWiQxWM3QAwVfSKsP1mXv51tiRGo4UUzNW77Ej2nKRJjhK
 wDNiZ+08khfeS2BuF9J2ebAzpgma5EgweH2z7zmx8Ch5t4Cx6hVAQ4Z6axbZMGjP
 HxXPw5rIwZTnQYoaGU86BrxrFH2j2bb963kWoDzliH+4PQrJ/iIEpkF7vu5Y2oWr
 WtXdOo6CsdQh1rT1UWA87ZYDtkWgj3/ITv5xJrXf8VyD9WHHSPst616XHLzBLGzo
 Hc+lAPhnVm59XZhQbVgXZy37Eqa9qHEG6GIRUkwD13nttSSfLfizO0IlXlH+awQV
 2A+TjbAt2lneUaRzMPfxG/yFt3rPqbBfSWj3o2ClPPn9sKksKxj7IjNW0v81Ztq/
 H6UmYRuq+wlQJzlwiF8+6SzoBXObztrmtIa2ipiM5k+xePG1jsPGFLm98UMlPcxN
 5IMz78DQ/hE3K3fKRt6clImd98xq5R0H9iUQPor2I7C/67fpTjThDRdHDUina1tk
 Oxo=
 =vAit
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - fix a PageHighMem check in dma-coherent initialization (Doug Berger)

 - clean up the coherency defaul initialiation (Jiaxun Yang)

 - add cacheline to user/kernel dma-debug space dump messages (Desnes
   Nunes, Geert Uytterhoeve)

 - swiotlb statistics improvements (Michael Kelley)

 - misc cleanups (Petr Tesarik)

* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
  swiotlb: track and report io_tlb_used high water marks in debugfs
  swiotlb: fix debugfs reporting of reserved memory pools
  swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
  of: address: always use dma_default_coherent for default coherency
  dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
  dma-mapping: provide a fallback dma_default_coherent
  dma-debug: Use %pa to format phys_addr_t
  dma-debug: add cacheline to user/kernel space dump messages
  dma-debug: small dma_debug_entry's comment and variable name updates
  dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
 2023-04-29 10:29:57 -07:00
Linus Torvalds 7fa8a8ee94 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of 
switching from a user process to a kernel thread.
 
 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
 
 - zsmalloc performance improvements from Sergey Senozhatsky.
 
 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.
 
 - VFS rationalizations from Christoph Hellwig:
 
   - removal of most of the callers of write_one_page().
 
   - make __filemap_get_folio()'s return value more useful
 
 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing.  Use `mount -o noswap'.
 
 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.
 
 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).
 
 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.
 
 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
   than exclusive, and has fixed a bunch of errors which were caused by its
   unintuitive meaning.
 
 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.
 
 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.
 
 - Cleanups to do_fault_around() by Lorenzo Stoakes.
 
 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.
 
 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.
 
 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.
 
 - Lorenzo has also contributed further cleanups of vma_merge().
 
 - Chaitanya Prakash provides some fixes to the mmap selftesting code.
 
 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.
 
 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.
 
 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.
 
 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.
 
 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.
 
 - Yosry Ahmed has improved the performance of memcg statistics flushing.
 
 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.
 
 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.
 
 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.
 
 - Pankaj Raghav has made page_endio() unneeded and has removed it.
 
 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.
 
 - Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
 
 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.
 
 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.
 
 - Peter Xu fixes a few issues with uffd-wp at fork() time.
 
 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
 jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
 eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
 =J+Dj
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
   switching from a user process to a kernel thread.

 - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
   Raghav.

 - zsmalloc performance improvements from Sergey Senozhatsky.

 - Yue Zhao has found and fixed some data race issues around the
   alteration of memcg userspace tunables.

 - VFS rationalizations from Christoph Hellwig:
     - removal of most of the callers of write_one_page()
     - make __filemap_get_folio()'s return value more useful

 - Luis Chamberlain has changed tmpfs so it no longer requires swap
   backing. Use `mount -o noswap'.

 - Qi Zheng has made the slab shrinkers operate locklessly, providing
   some scalability benefits.

 - Keith Busch has improved dmapool's performance, making part of its
   operations O(1) rather than O(n).

 - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
   permitting userspace to wr-protect anon memory unpopulated ptes.

 - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
   rather than exclusive, and has fixed a bunch of errors which were
   caused by its unintuitive meaning.

 - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
   which causes minor faults to install a write-protected pte.

 - Vlastimil Babka has done some maintenance work on vma_merge():
   cleanups to the kernel code and improvements to our userspace test
   harness.

 - Cleanups to do_fault_around() by Lorenzo Stoakes.

 - Mike Rapoport has moved a lot of initialization code out of various
   mm/ files and into mm/mm_init.c.

 - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
   DRM, but DRM doesn't use it any more.

 - Lorenzo has also coverted read_kcore() and vread() to use iterators
   and has thereby removed the use of bounce buffers in some cases.

 - Lorenzo has also contributed further cleanups of vma_merge().

 - Chaitanya Prakash provides some fixes to the mmap selftesting code.

 - Matthew Wilcox changes xfs and afs so they no longer take sleeping
   locks in ->map_page(), a step towards RCUification of pagefaults.

 - Suren Baghdasaryan has improved mmap_lock scalability by switching to
   per-VMA locking.

 - Frederic Weisbecker has reworked the percpu cache draining so that it
   no longer causes latency glitches on cpu isolated workloads.

 - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
   logic.

 - Liu Shixin has changed zswap's initialization so we no longer waste a
   chunk of memory if zswap is not being used.

 - Yosry Ahmed has improved the performance of memcg statistics
   flushing.

 - David Stevens has fixed several issues involving khugepaged,
   userfaultfd and shmem.

 - Christoph Hellwig has provided some cleanup work to zram's IO-related
   code paths.

 - David Hildenbrand has fixed up some issues in the selftest code's
   testing of our pte state changing.

 - Pankaj Raghav has made page_endio() unneeded and has removed it.

 - Peter Xu contributed some rationalizations of the userfaultfd
   selftests.

 - Yosry Ahmed has fixed an issue around memcg's page recalim
   accounting.

 - Chaitanya Prakash has fixed some arm-related issues in the
   selftests/mm code.

 - Longlong Xia has improved the way in which KSM handles hwpoisoned
   pages.

 - Peter Xu fixes a few issues with uffd-wp at fork() time.

 - Stefan Roesch has changed KSM so that it may now be used on a
   per-process and per-cgroup basis.

* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
  mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
  shmem: restrict noswap option to initial user namespace
  mm/khugepaged: fix conflicting mods to collapse_file()
  sparse: remove unnecessary 0 values from rc
  mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
  hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
  maple_tree: fix allocation in mas_sparse_area()
  mm: do not increment pgfault stats when page fault handler retries
  zsmalloc: allow only one active pool compaction context
  selftests/mm: add new selftests for KSM
  mm: add new KSM process and sysfs knobs
  mm: add new api to enable ksm per process
  mm: shrinkers: fix debugfs file permissions
  mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
  migrate_pages_batch: fix statistics for longterm pin retry
  userfaultfd: use helper function range_in_vma()
  lib/show_mem.c: use for_each_populated_zone() simplify code
  mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
  fs/buffer: convert create_page_buffers to folio_create_buffers
  fs/buffer: add folio_create_empty_buffers helper
  ...
 2023-04-27 19:42:02 -07:00
Linus Torvalds da46b58ff8 hyperv-next for v6.4 
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmRHJSgTHHdlaS5saXVA
 a2VybmVsLm9yZwAKCRB2FHBfkEGgXjSOCAClsmFmyP320yAB74vQer5cSzxbIpFW
 3qt/P3D8zABn0UxjjmD8+LTHuyB+72KANU6qQ9No6zdYs8yaA1vGX8j8UglWWHuj
 fmaAD4DuZl+V+fmqDgHukgaPlhakmW0m5tJkR+TW3kCgnyrtvSWpXPoxUAe6CLvj
 Kb/SPl6ylHRWlIAEZ51gy0Ipqxjvs5vR/h9CWpTmRMuZvxdWUro2Cm82wJgzXPqq
 3eLbAzB29kLFEIIUpba9a/rif1yrWgVFlfpuENFZ+HUYuR78wrPB9evhwuPvhXd2
 +f+Wk0IXORAJo8h7aaMMIr6bd4Lyn98GPgmS5YSe92HRIqjBvtYs3Dq8
 =F6+n
 -----END PGP SIGNATURE-----

Merge tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - PCI passthrough for Hyper-V confidential VMs (Michael Kelley)

 - Hyper-V VTL mode support (Saurabh Sengar)

 - Move panic report initialization code earlier (Long Li)

 - Various improvements and bug fixes (Dexuan Cui and Michael Kelley)

* tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
  PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg
  Drivers: hv: move panic report code from vmbus to hv early init code
  x86/hyperv: VTL support for Hyper-V
  Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
  x86/hyperv: Make hv_get_nmi_reason public
  x86/hyperv: Add VTL specific structs and hypercalls
  x86/init: Make get/set_rtc_noop() public
  x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes
  x86/hyperv: Add callback filter to cpumask_to_vpset()
  Drivers: hv: vmbus: Remove the per-CPU post_msg_page
  clocksource: hyper-v: make sure Invariant-TSC is used if it is available
  PCI: hv: Enable PCI pass-thru devices in Confidential VMs
  Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
  hv_netvsc: Remove second mapping of send and recv buffers
  Drivers: hv: vmbus: Remove second way of mapping ring buffers
  Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
  swiotlb: Remove bounce buffer remapping for Hyper-V
  Driver: VMBus: Add Devicetree support
  dt-bindings: bus: Add Hyper-V VMBus
  Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
  ...
 2023-04-27 17:17:12 -07:00
Linus Torvalds b6a7828502 modules-6.4-rc1 
The summary of the changes for this pull requests is:
 
  * Song Liu's new struct module_memory replacement
  * Nick Alcock's MODULE_LICENSE() removal for non-modules
  * My cleanups and enhancements to reduce the areas where we vmalloc
    module memory for duplicates, and the respective debug code which
    proves the remaining vmalloc pressure comes from userspace.
 
 Most of the changes have been in linux-next for quite some time except
 the minor fixes I made to check if a module was already loaded
 prior to allocating the final module memory with vmalloc and the
 respective debug code it introduces to help clarify the issue. Although
 the functional change is small it is rather safe as it can only *help*
 reduce vmalloc space for duplicates and is confirmed to fix a bootup
 issue with over 400 CPUs with KASAN enabled. I don't expect stable
 kernels to pick up that fix as the cleanups would have also had to have
 been picked up. Folks on larger CPU systems with modules will want to
 just upgrade if vmalloc space has been an issue on bootup.
 
 Given the size of this request, here's some more elaborate details
 on this pull request.
 
 The functional change change in this pull request is the very first
 patch from Song Liu which replaces the struct module_layout with a new
 struct module memory. The old data structure tried to put together all
 types of supported module memory types in one data structure, the new
 one abstracts the differences in memory types in a module to allow each
 one to provide their own set of details. This paves the way in the
 future so we can deal with them in a cleaner way. If you look at changes
 they also provide a nice cleanup of how we handle these different memory
 areas in a module. This change has been in linux-next since before the
 merge window opened for v6.3 so to provide more than a full kernel cycle
 of testing. It's a good thing as quite a bit of fixes have been found
 for it.
 
 Jason Baron then made dynamic debug a first class citizen module user by
 using module notifier callbacks to allocate / remove module specific
 dynamic debug information.
 
 Nick Alcock has done quite a bit of work cross-tree to remove module
 license tags from things which cannot possibly be module at my request
 so to:
 
   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area
      is active with no clear solution in sight.
 
   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags
 
 In so far as a) is concerned, although module license tags are a no-op
 for non-modules, tools which would want create a mapping of possible
 modules can only rely on the module license tag after the commit
 8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
 or tristate.conf").  Nick has been working on this *for years* and
 AFAICT I was the only one to suggest two alternatives to this approach
 for tooling. The complexity in one of my suggested approaches lies in
 that we'd need a possible-obj-m and a could-be-module which would check
 if the object being built is part of any kconfig build which could ever
 lead to it being part of a module, and if so define a new define
 -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
 suggested would be to have a tristate in kconfig imply the same new
 -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
 mapping to modules always, and I don't think that's the case today. I am
 not aware of Nick or anyone exploring either of these options. Quite
 recently Josh Poimboeuf has pointed out that live patching, kprobes and
 BPF would benefit from resolving some part of the disambiguation as
 well but for other reasons. The function granularity KASLR (fgkaslr)
 patches were mentioned but Joe Lawrence has clarified this effort has
 been dropped with no clear solution in sight [1].
 
 In the meantime removing module license tags from code which could never
 be modules is welcomed for both objectives mentioned above. Some
 developers have also welcomed these changes as it has helped clarify
 when a module was never possible and they forgot to clean this up,
 and so you'll see quite a bit of Nick's patches in other pull
 requests for this merge window. I just picked up the stragglers after
 rc3. LWN has good coverage on the motivation behind this work [2] and
 the typical cross-tree issues he ran into along the way. The only
 concrete blocker issue he ran into was that we should not remove the
 MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
 they can never be modules. Nick ended up giving up on his efforts due
 to having to do this vetting and backlash he ran into from folks who
 really did *not understand* the core of the issue nor were providing
 any alternative / guidance. I've gone through his changes and dropped
 the patches which dropped the module license tags where an SPDX
 license tag was missing, it only consisted of 11 drivers.  To see
 if a pull request deals with a file which lacks SPDX tags you
 can just use:
 
   ./scripts/spdxcheck.py -f \
 	$(git diff --name-only commid-id | xargs echo)
 
 You'll see a core module file in this pull request for the above,
 but that's not related to his changes. WE just need to add the SPDX
 license tag for the kernel/module/kmod.c file in the future but
 it demonstrates the effectiveness of the script.
 
 Most of Nick's changes were spread out through different trees,
 and I just picked up the slack after rc3 for the last kernel was out.
 Those changes have been in linux-next for over two weeks.
 
 The cleanups, debug code I added and final fix I added for modules
 were motivated by David Hildenbrand's report of boot failing on
 a systems with over 400 CPUs when KASAN was enabled due to running
 out of virtual memory space. Although the functional change only
 consists of 3 lines in the patch "module: avoid allocation if module is
 already present and ready", proving that this was the best we can
 do on the modules side took quite a bit of effort and new debug code.
 
 The initial cleanups I did on the modules side of things has been
 in linux-next since around rc3 of the last kernel, the actual final
 fix for and debug code however have only been in linux-next for about a
 week or so but I think it is worth getting that code in for this merge
 window as it does help fix / prove / evaluate the issues reported
 with larger number of CPUs. Userspace is not yet fixed as it is taking
 a bit of time for folks to understand the crux of the issue and find a
 proper resolution. Worst come to worst, I have a kludge-of-concept [3]
 of how to make kernel_read*() calls for modules unique / converge them,
 but I'm currently inclined to just see if userspace can fix this
 instead.
 
 [0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
 [1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
 [2] https://lwn.net/Articles/927569/
 [3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRG4m0SHG1jZ3JvZkBr
 ZXJuZWwub3JnAAoJEM4jHQowkoinQ2oP/0xlvKwJg6Ey8fHZF0qv8VOskE80zoLF
 hMazU3xfqLA+1TQvouW1YBxt3jwS3t1Ehs+NrV+nY9Yzcm0MzRX/n3fASJVe7nRr
 oqWWQU+voYl5Pw1xsfdp6C8IXpBQorpYby3Vp0MAMoZyl2W2YrNo36NV488wM9KC
 jD4HF5Z6xpnPSZTRR7AgW9mo7FdAtxPeKJ76Bch7lH8U6omT7n36WqTw+5B1eAYU
 YTOvrjRs294oqmWE+LeebyiOOXhH/yEYx4JNQgCwPdxwnRiGJWKsk5va0hRApqF/
 WW8dIqdEnjsa84lCuxnmWgbcPK8cgmlO0rT0DyneACCldNlldCW1LJ0HOwLk9pea
 p3JFAsBL7TKue4Tos6I7/4rx1ufyBGGIigqw9/VX5g0Iif+3BhWnqKRfz+p9wiMa
 Fl7cU6u7yC68CHu1HBSisK16cYMCPeOnTSd89upHj8JU/t74O6k/ARvjrQ9qmNUt
 c5U+OY+WpNJ1nXQydhY/yIDhFdYg8SSpNuIO90r4L8/8jRQYXNG80FDd1UtvVDuy
 eq0r2yZ8C0XHSlOT9QHaua/tWV/aaKtyC/c0hDRrigfUrq8UOlGujMXbUnrmrWJI
 tLJLAc7ePWAAoZXGSHrt0U27l029GzLwRdKqJ6kkDANVnTeOdV+mmBg9zGh3/Mp6
 agiwdHUMVN7X
 =56WK
 -----END PGP SIGNATURE-----

Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux

Pull module updates from Luis Chamberlain:
 "The summary of the changes for this pull requests is:

   - Song Liu's new struct module_memory replacement

   - Nick Alcock's MODULE_LICENSE() removal for non-modules

   - My cleanups and enhancements to reduce the areas where we vmalloc
     module memory for duplicates, and the respective debug code which
     proves the remaining vmalloc pressure comes from userspace.

  Most of the changes have been in linux-next for quite some time except
  the minor fixes I made to check if a module was already loaded prior
  to allocating the final module memory with vmalloc and the respective
  debug code it introduces to help clarify the issue. Although the
  functional change is small it is rather safe as it can only *help*
  reduce vmalloc space for duplicates and is confirmed to fix a bootup
  issue with over 400 CPUs with KASAN enabled. I don't expect stable
  kernels to pick up that fix as the cleanups would have also had to
  have been picked up. Folks on larger CPU systems with modules will
  want to just upgrade if vmalloc space has been an issue on bootup.

  Given the size of this request, here's some more elaborate details:

  The functional change change in this pull request is the very first
  patch from Song Liu which replaces the 'struct module_layout' with a
  new 'struct module_memory'. The old data structure tried to put
  together all types of supported module memory types in one data
  structure, the new one abstracts the differences in memory types in a
  module to allow each one to provide their own set of details. This
  paves the way in the future so we can deal with them in a cleaner way.
  If you look at changes they also provide a nice cleanup of how we
  handle these different memory areas in a module. This change has been
  in linux-next since before the merge window opened for v6.3 so to
  provide more than a full kernel cycle of testing. It's a good thing as
  quite a bit of fixes have been found for it.

  Jason Baron then made dynamic debug a first class citizen module user
  by using module notifier callbacks to allocate / remove module
  specific dynamic debug information.

  Nick Alcock has done quite a bit of work cross-tree to remove module
  license tags from things which cannot possibly be module at my request
  so to:

   a) help him with his longer term tooling goals which require a
      deterministic evaluation if a piece a symbol code could ever be
      part of a module or not. But quite recently it is has been made
      clear that tooling is not the only one that would benefit.
      Disambiguating symbols also helps efforts such as live patching,
      kprobes and BPF, but for other reasons and R&D on this area is
      active with no clear solution in sight.

   b) help us inch closer to the now generally accepted long term goal
      of automating all the MODULE_LICENSE() tags from SPDX license tags

  In so far as a) is concerned, although module license tags are a no-op
  for non-modules, tools which would want create a mapping of possible
  modules can only rely on the module license tag after the commit
  8b41fc4454 ("kbuild: create modules.builtin without
  Makefile.modbuiltin or tristate.conf").

  Nick has been working on this *for years* and AFAICT I was the only
  one to suggest two alternatives to this approach for tooling. The
  complexity in one of my suggested approaches lies in that we'd need a
  possible-obj-m and a could-be-module which would check if the object
  being built is part of any kconfig build which could ever lead to it
  being part of a module, and if so define a new define
  -DPOSSIBLE_MODULE [0].

  A more obvious yet theoretical approach I've suggested would be to
  have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
  well but that means getting kconfig symbol names mapping to modules
  always, and I don't think that's the case today. I am not aware of
  Nick or anyone exploring either of these options. Quite recently Josh
  Poimboeuf has pointed out that live patching, kprobes and BPF would
  benefit from resolving some part of the disambiguation as well but for
  other reasons. The function granularity KASLR (fgkaslr) patches were
  mentioned but Joe Lawrence has clarified this effort has been dropped
  with no clear solution in sight [1].

  In the meantime removing module license tags from code which could
  never be modules is welcomed for both objectives mentioned above. Some
  developers have also welcomed these changes as it has helped clarify
  when a module was never possible and they forgot to clean this up, and
  so you'll see quite a bit of Nick's patches in other pull requests for
  this merge window. I just picked up the stragglers after rc3. LWN has
  good coverage on the motivation behind this work [2] and the typical
  cross-tree issues he ran into along the way. The only concrete blocker
  issue he ran into was that we should not remove the MODULE_LICENSE()
  tags from files which have no SPDX tags yet, even if they can never be
  modules. Nick ended up giving up on his efforts due to having to do
  this vetting and backlash he ran into from folks who really did *not
  understand* the core of the issue nor were providing any alternative /
  guidance. I've gone through his changes and dropped the patches which
  dropped the module license tags where an SPDX license tag was missing,
  it only consisted of 11 drivers. To see if a pull request deals with a
  file which lacks SPDX tags you can just use:

    ./scripts/spdxcheck.py -f \
	$(git diff --name-only commid-id | xargs echo)

  You'll see a core module file in this pull request for the above, but
  that's not related to his changes. WE just need to add the SPDX
  license tag for the kernel/module/kmod.c file in the future but it
  demonstrates the effectiveness of the script.

  Most of Nick's changes were spread out through different trees, and I
  just picked up the slack after rc3 for the last kernel was out. Those
  changes have been in linux-next for over two weeks.

  The cleanups, debug code I added and final fix I added for modules
  were motivated by David Hildenbrand's report of boot failing on a
  systems with over 400 CPUs when KASAN was enabled due to running out
  of virtual memory space. Although the functional change only consists
  of 3 lines in the patch "module: avoid allocation if module is already
  present and ready", proving that this was the best we can do on the
  modules side took quite a bit of effort and new debug code.

  The initial cleanups I did on the modules side of things has been in
  linux-next since around rc3 of the last kernel, the actual final fix
  for and debug code however have only been in linux-next for about a
  week or so but I think it is worth getting that code in for this merge
  window as it does help fix / prove / evaluate the issues reported with
  larger number of CPUs. Userspace is not yet fixed as it is taking a
  bit of time for folks to understand the crux of the issue and find a
  proper resolution. Worst come to worst, I have a kludge-of-concept [3]
  of how to make kernel_read*() calls for modules unique / converge
  them, but I'm currently inclined to just see if userspace can fix this
  instead"

Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]

* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
  module: add debugging auto-load duplicate module support
  module: stats: fix invalid_mod_bytes typo
  module: remove use of uninitialized variable len
  module: fix building stats for 32-bit targets
  module: stats: include uapi/linux/module.h
  module: avoid allocation if module is already present and ready
  module: add debug stats to help identify memory pressure
  module: extract patient module check into helper
  modules/kmod: replace implementation with a semaphore
  Change DEFINE_SEMAPHORE() to take a number argument
  module: fix kmemleak annotations for non init ELF sections
  module: Ignore L0 and rename is_arm_mapping_symbol()
  module: Move is_arm_mapping_symbol() to module_symbol.h
  module: Sync code of is_arm_mapping_symbol()
  scripts/gdb: use mem instead of core_layout to get the module address
  interconnect: remove module-related code
  interconnect: remove MODULE_LICENSE in non-modules
  zswap: remove MODULE_LICENSE in non-modules
  zpool: remove MODULE_LICENSE in non-modules
  x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
  ...
 2023-04-27 16:36:55 -07:00
Petr Tesarik ec274aff21 swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS 
The tracking of used_hiwater adds an atomic operation to the hot
path. This is acceptable only when debugging the kernel. To make
sure that the fields can never be used by mistake, do not even
include them in struct io_tlb_mem if CONFIG_DEBUG_FS is not set.

The build fails after doing that. To fix it, it is necessary to
remove all code specific to debugfs and instead provide a stub
implementation of swiotlb_create_debugfs_files(). As a bonus, this
change allows to remove one __maybe_unused attribute.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
 2023-04-20 14:51:41 +02:00
Michael Kelley 0459ff4873 swiotlb: Remove bounce buffer remapping for Hyper-V 
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().

As such, remove swiotlb_unencrypted_base and the associated
code.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1679838727-87310-8-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
 2023-04-17 19:19:04 +00:00