mirror of https://github.com/torvalds/linux.git
30 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
0c02183427 |
ARM:
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
|
|
Eric DeVolder
|
a72bbec70d |
crash: hotplug support for kexec_load()
The hotplug support for kexec_load() requires changes to the userspace
kexec-tools and a little extra help from the kernel.
Given a kdump capture kernel loaded via kexec_load(), and a subsequent
hotplug event, the crash hotplug handler finds the elfcorehdr and rewrites
it to reflect the hotplug change. That is the desired outcome, however,
at kernel panic time, the purgatory integrity check fails (because the
elfcorehdr changed), and the capture kernel does not boot and no vmcore is
generated.
Therefore, the userspace kexec-tools/kexec must indicate to the kernel
that the elfcorehdr can be modified (because the kexec excluded the
elfcorehdr from the digest, and sized the elfcorehdr memory buffer
appropriately).
To facilitate hotplug support with kexec_load():
- a new kexec flag KEXEC_UPATE_ELFCOREHDR indicates that it is
safe for the kernel to modify the kexec_load()'d elfcorehdr
- the /sys/kernel/crash_elfcorehdr_size node communicates the
preferred size of the elfcorehdr memory buffer
- The sysfs crash_hotplug nodes (ie.
/sys/devices/system/[cpu|memory]/crash_hotplug) dynamically
take into account kexec_file_load() vs kexec_load() and
KEXEC_UPDATE_ELFCOREHDR.
This is critical so that the udev rule processing of crash_hotplug
is all that is needed to determine if the userspace unload-then-load
of the kdump image is to be skipped, or not. The proposed udev
rule change looks like:
# The kernel updates the crash elfcorehdr for CPU and memory changes
SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
The table below indicates the behavior of kexec_load()'d kdump image
updates (with the new udev crash_hotplug rule in place):
Kernel |Kexec
-------+-----+----
Old |Old |New
| a | a
-------+-----+----
New | a | b
-------+-----+----
where kexec 'old' and 'new' delineate kexec-tools has the needed
modifications for the crash hotplug feature, and kernel 'old' and 'new'
delineate the kernel supports this crash hotplug feature.
Behavior 'a' indicates the unload-then-reload of the entire kdump image.
For the kexec 'old' column, the unload-then-reload occurs due to the
missing flag KEXEC_UPDATE_ELFCOREHDR. An 'old' kernel (with 'new' kexec)
does not present the crash_hotplug sysfs node, which leads to the
unload-then-reload of the kdump image.
Behavior 'b' indicates the desired optimized behavior of the kernel
directly modifying the elfcorehdr and avoiding the unload-then-reload of
the kdump image.
If the udev rule is not updated with crash_hotplug node check, then no
matter any combination of kernel or kexec is new or old, the kdump image
continues to be unload-then-reload on hotplug changes.
To fully support crash hotplug feature, there needs to be a rollout of
kernel, kexec-tools and udev rule changes. However, the order of the
rollout of these pieces does not matter; kexec_load()'d kdump images still
function for hotplug as-is.
Link: https://lkml.kernel.org/r/20230814214446.6659-7-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Suggested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
Eric DeVolder
|
ea53ad9cf7 |
x86/crash: add x86 crash hotplug support
When CPU or memory is hot un/plugged, or off/onlined, the crash elfcorehdr, which describes the CPUs and memory in the system, must also be updated. A new elfcorehdr is generated from the available CPUs and memory and replaces the existing elfcorehdr. The segment containing the elfcorehdr is identified at run-time in crash_core:crash_handle_hotplug_event(). No modifications to purgatory (see 'kexec: exclude elfcorehdr from the segment digest') or boot_params (as the elfcorehdr= capture kernel command line parameter pointer remains unchanged and correct) are needed, just elfcorehdr. For kexec_file_load(), the elfcorehdr segment size is based on NR_CPUS and CRASH_MAX_MEMORY_RANGES in order to accommodate a growing number of CPU and memory resources. For kexec_load(), the userspace kexec utility needs to size the elfcorehdr segment in the same/similar manner. To accommodate kexec_load() syscall in the absence of kexec_file_load() syscall support, prepare_elf_headers() and dependents are moved outside of CONFIG_KEXEC_FILE. [eric.devolder@oracle.com: correct unused function build error] Link: https://lkml.kernel.org/r/20230821182644.2143-1-eric.devolder@oracle.com Link: https://lkml.kernel.org/r/20230814214446.6659-6-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Sean Christopherson
|
b23c83ad2c |
x86/reboot: VMCLEAR active VMCSes before emergency reboot
VMCLEAR active VMCSes before any emergency reboot, not just if the kernel may kexec into a new kernel after a crash. Per Intel's SDM, the VMX architecture doesn't require the CPU to flush the VMCS cache on INIT. If an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically be kept and only be written back to memory after the new kernel is booted, i.e. could effectively corrupt memory after reboot. Opportunistically remove the setting of the global pointer to NULL to make checkpatch happy. Cc: Andrew Cooper <Andrew.Cooper3@citrix.com> Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
|
Bjorn Helgaas
|
7982722ff7 |
x86/kexec: remove unnecessary arch_kexec_kernel_image_load()
Patch series "kexec: Remove unnecessary arch hook", v2.
There are no arch-specific things in arch_kexec_kernel_image_load(), so
remove it and just use the generic version.
This patch (of 2):
The x86 implementation of arch_kexec_kernel_image_load() is functionally
identical to the generic arch_kexec_kernel_image_load():
arch_kexec_kernel_image_load # x86
if (!image->fops || !image->fops->load)
return ERR_PTR(-ENOEXEC);
return image->fops->load(image, image->kernel_buf, ...)
arch_kexec_kernel_image_load # generic
kexec_image_load_default
if (!image->fops || !image->fops->load)
return ERR_PTR(-ENOEXEC);
return image->fops->load(image, image->kernel_buf, ...)
Remove the x86-specific version and use the generic
arch_kexec_kernel_image_load(). No functional change intended.
Link: https://lkml.kernel.org/r/20230307224416.907040-1-helgaas@kernel.org
Link: https://lkml.kernel.org/r/20230307224416.907040-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Naveen N. Rao
|
0738eceb62 |
kexec: drop weak attribute from functions
Drop __weak attribute from functions in kexec_core.c: - machine_kexec_post_load() - arch_kexec_protect_crashkres() - arch_kexec_unprotect_crashkres() - crash_free_reserved_phys_range() Link: https://lkml.kernel.org/r/c0f6219e03cb399d166d518ab505095218a902dd.1656659357.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Suggested-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
|
|
Naveen N. Rao
|
65d9a9a60f |
kexec_file: drop weak attribute from functions
As requested
(http://lkml.kernel.org/r/87ee0q7b92.fsf@email.froward.int.ebiederm.org),
this series converts weak functions in kexec to use the #ifdef approach.
Quoting the
|
|
|
Naveen N. Rao
|
3e35142ef9 |
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1
[akpm@linux-foundation.org: arch/s390/include/asm/kexec.h needs linux/module.h]
Link: https://lkml.kernel.org/r/20220519091237.676736-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Tom Lendacky
|
32cb4d02fb |
x86/sme: Replace occurrences of sme_active() with cc_platform_has()
Replace uses of sme_active() with the more generic cc_platform_has() using CC_ATTR_HOST_MEM_ENCRYPT. If future support is added for other memory encryption technologies, the use of CC_ATTR_HOST_MEM_ENCRYPT can be updated, as required. This also replaces two usages of sev_active() that are really geared towards detecting if SME is active. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210928191009.32551-6-bp@alien8.de |
|
Lakshmi Ramasubramanian
|
179350f00e |
x86: Use ELF fields defined in 'struct kimage'
ELF related fields elf_headers, elf_headers_sz, and elf_load_addr have been moved from 'struct kimage_arch' to 'struct kimage'. Use the ELF fields defined in 'struct kimage'. Suggested-by: Rob Herring <robh@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210221174930.27324-5-nramas@linux.microsoft.com |
|
Lianbo Jiang
|
7c321eb2b8 |
x86/kdump: Remove the backup region handling
When the crashkernel kernel command line option is specified, the low 1M memory will always be reserved now. Therefore, it's not necessary to create a backup region anymore and also no need to copy the contents of the first 640k to it. Remove all the code related to handling that backup region. [ bp: Massage commit message. ] Signed-off-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: bhe@redhat.com Cc: Dave Young <dyoung@redhat.com> Cc: d.hatayama@fujitsu.com Cc: dhowells@redhat.com Cc: ebiederm@xmission.com Cc: horms@verge.net.au Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jürgen Gross <jgross@suse.com> Cc: kexec@lists.infradead.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191108090027.11082-3-lijiang@redhat.com |
|
Peter Zijlstra
|
3c88c692c2 |
x86/stackframe/32: Provide consistent pt_regs
Currently pt_regs on x86_32 has an oddity in that kernel regs (!user_mode(regs)) are short two entries (esp/ss). This means that any code trying to use them (typically: regs->sp) needs to jump through some unfortunate hoops. Change the entry code to fix this up and create a full pt_regs frame. This then simplifies various trampolines in ftrace and kprobes, the stack unwinder, ptrace, kdump and kgdb. Much thanks to Josh for help with the cleanups! Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
Nick Desaulniers
|
de0d22e50c |
treewide: remove current_text_addr
Prefer _THIS_IP_ defined in linux/kernel.h. Most definitions of current_text_addr were the same as _THIS_IP_, but a few archs had inline assembly instead. This patch removes the final call site of current_text_addr, making all of the definitions dead code. [akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h] Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Bjorn Helgaas
|
51fbf14f25 |
x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error
The only use of KEXEC_BACKUP_SRC_END is as an argument to
walk_system_ram_res():
int crash_load_segments(struct kimage *image)
{
...
walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END,
image, determine_backup_region);
walk_system_ram_res() expects "start, end" arguments that are inclusive,
i.e., the range to be walked includes both the start and end addresses.
KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the
first address *past* the desired 0-640KB range.
Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC
region is [0-0x9ffff], not [0-0xa0000].
Fixes:
|
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Tom Lendacky
|
4e237903f9 |
x86/mm, kexec: Fix memory corruption with SME on successive kexecs
After issuing successive kexecs it was found that the SHA hash failed verification when booting the kexec'd kernel. When SME is enabled, the change from using pages that were marked encrypted to now being marked as not encrypted (through new identify mapped page tables) results in memory corruption if there are any cache entries for the previously encrypted pages. This is because separate cache entries can exist for the same physical location but tagged both with and without the encryption bit. To prevent this, issue a wbinvd if SME is active before copying the pages from the source location to the destination location to clear any possible cache entry conflicts. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <kexec@lists.infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e7fb8610af3a93e8f8ae6f214cd9249adc0df2b4.1501186516.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Tom Lendacky
|
bba4ed011a |
x86/mm, kexec: Allow kexec to be used with SME
Provide support so that kexec can be used to boot a kernel when SME is enabled. Support is needed to allocate pages for kexec without encryption. This is needed in order to be able to reboot in the kernel in the same manner as originally booted. Additionally, when shutting down all of the CPUs we need to be sure to flush the caches and then halt. This is needed when booting from a state where SME was not active into a state where SME is active (or vice-versa). Without these steps, it is possible for cache lines to exist for the same physical location but tagged both with and without the encryption bit. This can cause random memory corruption when caches are flushed depending on which cacheline is written last. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: <kexec@lists.infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b95ff075db3e7cd545313f2fb609a49619a09625.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
Kirill A. Shutemov
|
7f68904182 |
x86/kexec: Add 5-level paging support
Handle additional page table level in the kexec code. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170317185515.8636-2-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
Hidehiro Kawai
|
0ee59413c9 |
x86/panic: replace smp_send_stop() with kdump friendly version in panic path
Daniel Walker reported problems which happens when
crash_kexec_post_notifiers kernel option is enabled
(https://lkml.org/lkml/2015/6/24/44).
In that case, smp_send_stop() is called before entering kdump routines
which assume other CPUs are still online. As the result, for x86, kdump
routines fail to save other CPUs' registers and disable virtualization
extensions.
To fix this problem, call a new kdump friendly function,
crash_smp_send_stop(), instead of the smp_send_stop() when
crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak
function, and it just call smp_send_stop(). Architecture codes should
override it so that kdump can work appropriately. This patch only
provides x86-specific version.
For Xen's PV kernel, just keep the current behavior.
NOTES:
- Right solution would be to place crash_smp_send_stop() before
__crash_kexec() invocation in all cases and remove smp_send_stop(), but
we can't do that until all architectures implement own
crash_smp_send_stop()
- crash_smp_send_stop()-like work is still needed by
machine_crash_shutdown() because crash_kexec() can be called without
entering panic()
Fixes:
|
|
Vivek Goyal
|
dd5f726076 |
kexec: support for kexec on panic using new system call
This patch adds support for loading a kexec on panic (kdump) kernel usning new system call. It prepares ELF headers for memory areas to be dumped and for saved cpu registers. Also prepares the memory map for second kernel and limits its boot to reserved areas only. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Vivek Goyal
|
27f48d3e63 |
kexec-bzImage64: support for loading bzImage using 64bit entry
This is loader specific code which can load bzImage and set it up for 64bit entry. This does not take care of 32bit entry or real mode entry. 32bit mode entry can be implemented if somebody needs it. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Yinghai Lu
|
577af55d80 |
x86, kexec: Remove 1024G limitation for kexec buffer on 64bit
Now 64bit kernel supports more than 1T ram and kexec tools could find buffer above 1T, remove that obsolete limitation. and use MAXMEM instead. Tested on system with more than 1024G ram. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-22-git-send-email-yinghai@kernel.org Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
|
Zhang Yanfei
|
0ca0d818cb |
x86/kexec: crash_vmclear_local_vmcss needs __rcu
This removes the sparse warning: arch/x86/kernel/crash.c:49:32: sparse: incompatible types in comparison expression (different address spaces) Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> |
|
|
Zhang Yanfei
|
f23d1f4a11 |
x86/kexec: VMCLEAR VMCSs loaded on all cpus if necessary
This patch provides a way to VMCLEAR VMCSs related to guests on all cpus before executing the VMXOFF when doing kdump. This is used to ensure the VMCSs in the vmcore updated and non-corrupted. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> |
|
Huang Ying
|
fee7b0d84c |
x86, kexec: x86_64: add kexec jump support for x86_64
Impact: New major feature This patch add kexec jump support for x86_64. More information about kexec jump can be found in corresponding x86_32 support patch. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
|
|
Huang Ying
|
f5deb79679 |
x86: kexec: Use one page table in x86_64 machine_kexec
Impact: reduce kernel BSS size by 7 pages, improve code readability Two page tables are used in current x86_64 kexec implementation. One is used to jump from kernel virtual address to identity map address, the other is used to map all physical memory. In fact, on x86_64, there is no conflict between kernel virtual address space and physical memory space, so just one page table is sufficient. The page table pages used to map control page are dynamically allocated to save memory if kexec image is not loaded. ASM code used to map control page is replaced by C code too. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
|
|
Huang Ying
|
9868ee63b8 |
kexec/i386: setup kexec page table in C
Impact: change the kexec bootstrap code implementation from assembly to C This patch transforms the kexec page tables setup code from assembler code to C code in machine_kexec_prepare. This improves readability and reduces code line number. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> |
|
|
Huang Ying
|
92be3d6bdf |
kexec/i386: allocate page table pages dynamically
Impact: save .text size when kexec is built in but not loaded This patch adds an architecture specific struct kimage_arch into struct kimage. The pointers to page table pages used by kexec are added to struct kimage_arch. The page tables pages are dynamically allocated in machine_kexec_prepare instead of statically from BSS segment. This will save up to 20k memory when kexec image is not loaded. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> |
|
H. Peter Anvin
|
1965aae3c9 |
x86: Fix ASM_X86__ header guards
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
|
Al Viro
|
bb8985586b |
x86, um: ... and asm-x86 move
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com> |