Enabling and disabling the DMC wakelock should be done as part of
enabling and disabling of dynamic DC states, respectively. We should not
enable or disable DMC wakelock independently of DC states, otherwise we
would risk ending up with an inconsistent state where dynamic DC states
are enabled and the DMC wakelock is disabled, going against current
recommendations and making MMIO transactions potentially slower. In
future display IPs that could have a worse outcome if DMC trap
implementation is completely removed.
So, let's make things safer by tying stuff together, removing the
independent calls, and also put warnings in place to detect inconsistent
calls.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108130218.24125-13-gustavo.sousa@intel.com
There are extra registers that require the DMC wakelock when specific
dynamic DC states are in place. Those are registers that are touched by
the DMC and require DC exit for proper access. Add the range tables for
them and use the correct one depending on the enabled DC state.
v2:
- Do not look into power domains guts (i.e.
display->power.domains.dc_state). (Jani)
- Come up with better names for variables containing register ranges.
(Luca)
- Keep a copy of dc_state in struct intel_dmc_wl.
- Update commit message for a clearer explanation for the need of
these new tables.
Bspec: 71583
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108130218.24125-10-gustavo.sousa@intel.com
Bspec says that disabling dynamic DC states require taking the DMC
wakelock to cause an DC exit before writing to DC_STATE_EN. Implement
that.
In fact, testing on PTL revealed we end up failing to exit DC5/6 without
this step.
Bspec: 71583
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241108130218.24125-6-gustavo.sousa@intel.com
struct intel_display will replace struct drm_i915_private as the main
device pointer for display code. Switch assert_chv_phy_status() and its
callers to it. Main motivation to do just one function is to stop
passing i915 to intel_de_wait(), so its generic wrapper can be removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de6b01e1f21934ff520aa3b49ab5f97cbbf028f2.1730146000.git.jani.nikula@intel.com
The intel_pps_reset_all() function does similar but not quite the same
things for VLV/CHV and BXT/GLK. Observe that it's called from platform
specific code only, and a split to two functions vlv_pps_reset_all() and
bxt_pps_reset_all() is natural.
Remove the platform checks and warnings from the functions. We don't
usually have them, unless we're unsure. To make this easier to reason
about for BXT/GLK, change the condition on caller side from "!PCH" to
"BXT || GLK".
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240919090427.1859032-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the "i830 power well"
code to use it (as much as possible at this stage).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-6-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the lower level
DC state code to use it (as much as possible at this stage).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the CDCLK code to
use it (as much as possible at this stage).
v2: Add local 'display' variable to __intel_display_device_info_runtime_init() (Jani)
Simplify the to_intel_display(crtc_state) stuff (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use REG_BIT() & co. for the vlv/chv DPIO PHY registers.
Note that DPIO_BIAS_CURRENT_CTL_SHIFT was incorrectly defined
to be 21 wheres 20 is the correct value. It is not used in the
code though so didn't bother splitting to a separate patch.
v2: drop stray tabs (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Drop the leading underscore from the CHV PHY common lane
register definitions. We use these directly from actual
code so the underscore here is misleading as usually it indicates
an intermediate define that shouldn't be used directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We only need DMC wakelocks when we allow DC5 and DC6 states. Add the
calls to enable and disable DMC wakelock accordingly.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-5-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Do some renames on the register wait functions for clarity and brevity:
intel_de_wait_for_register -> intel_de_wait
intel_de_wait_for_register_fw -> intel_de_wait_fw
__intel_de_wait_for_register -> intel_de_wait_custom
In particular, it seemed odd to have a double-underscored function be
called in a number of places.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320160123.2904609-1-jani.nikula@intel.com
Our definitions for bit 7 and bit 0 of ICL_PORT_TX_DW6 are
swapped. Functionally it doesn't matter as we always set both
bits, but let's rename the bits to match bspec 100%.
And while at it, add the definition for bits 1-6 as well, just
to have it all fully documented.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308072400.28918-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Drop the pointless phy/port detour from the eDP handling
in icl_combo_phy_aux_power_well_enable(). We can just directly
consult the dig_port and determine whether it's eDP or not.
This also removes the assumption that port==phy, although that is
always trued on ICL, so it wasn't really doing any harm.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229200357.7969-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
We don't actually know whether we should be picking the PHY
simply based on the AUX_CH/power well, or based on the VBT
defined AUX_CH->DDI->PHY relationship. At the moment we are
doing the former for the ANAOVRD workaround, and the latter
for the ICL_LANE_ENABLE_AUX override. Windows seems to use the
first approach for everything. So let's unify this to follow
that same approach for both.
Eventually we should try to figure out which is actually
correct, or whether any of this even matters (ie. whether there
are any real machines where the DDI and its AUX_CH do not match
1:1).
Note that this also changes the behaviour if we do end up
poking an AUX power well not associated with any port (as
per VBT). Previously we would have skipped the PHY register
write, but now we always write it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229200357.7969-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Just return the correct thing from within the loop to make
the code more readable. We have no ref counts/etc. to deal
with here so no point in breaking from the loop just to return
something.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The icl+ power well code currently assumes that every AUX power
well maps to an encoder which is using said power well. That is
by no menas guaranteed as we:
- only register encoders for ports declared in the VBT
- combo PHY HDMI-only encoder no longer get an AUX CH since
commit 9856308c94 ("drm/i915: Only populate aux_ch if really needed")
However we have places such as intel_power_domains_sanitize_state()
that blindly traverse all the possible power wells. So these bits
of code may very well encounbter an aux power well with no associated
encoder.
In this particular case the BIOS seems to have left one AUX power
well enabled even though we're dealing with a HDMI only encoder
on a combo PHY. We then proceed to turn off said power well and
explode when we can't find a matching encoder. As a short term fix
we should be able to just skip the PHY related parts of the power
well programming since we know this situation can only happen with
combo PHYs.
Another option might be to go back to always picking an AUX CH for
all encoders. However I'm a bit wary about that since we might in
theory end up conflicting with the VBT AUX CH assignment. Also
that wouldn't help with encoders not declared in the VBT, should
we ever need to poke the corresponding power wells.
Longer term we need to figure out what the actual relationship
is between the PHY vs. AUX CH vs. AUX power well. Currently this
is entirely unclear.
Cc: stable@vger.kernel.org
Fixes: 9856308c94 ("drm/i915: Only populate aux_ch if really needed")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10184
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Looks like the name and description of intel_cdclk_needs_modeset()
became inaccurate as of commit 59f9e9cab3 ("drm/i915: Skip modeset for
cdclk changes if possible"), when it became possible to update the cdclk
without requiring disabling the pipes when only changing the cd2x
divider was enough.
Later on we also added the same type of support with squash and crawling
with commit 25e0e5ae56 ("drm/i915/display: Do both crawl and squash
when changing cdclk"), commit d4a2393049 ("drm/i915: Allow cdclk
squasher to be reconfigured live") and commit d62686ba3b
("drm/i915/adl_p: CDCLK crawl support for ADL").
As such, update that function's name and documentation to something more
appropriate, since the real checks for requiring modeset are done
elsewhere.
v2:
- Rename to intel_cdclk_clock_changed instead of
intel_cdclk_params_changed. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214202719.298407-2-gustavo.sousa@intel.com
vlv_dpio_read() and vlv_dpio_write() really operate on the phy, not
pipe. Passing the pipe instead of the phy as parameter is supposed to be
a convenience, but when the caller has the phy, it becomes an
inconvenience. See e.g. chv_dpio_cmn_power_well_enable() and
assert_chv_phy_powergate().
Figure out the phy in the callers, and pass phy to the dpio functions.
v2: retract one overzealous pipe->phy change (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114104534.4180144-3-jani.nikula@intel.com
Add Display Power Well for Xe2_LPD. It's mostly the same as Xe_LPD+,
so reuse the code. PGPICA1 contains type-C capable port slices
which requires the well to power powered up, so add new power well
definition for it.
The DC_OFF fake power well will be added in a follow up commit.
v2: Do not rmw as bit 31 is the only R/W bit in the register (Matt Roper)
BSpec: 68886
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-20-lucas.demarchi@intel.com
The address of CTL and DATA registers for DP AUX were changed in Xe2_LPD:
now they are all in a single range, with CH_A and CH_B coming right after
the USBC instances. Like was done when moving registers to PICA, use
a helper macro to remap the ch passed to an index that can be used to
calculate the right offset.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919192128.2045154-12-lucas.demarchi@intel.com
Split (non-hotplug) display irq handling out of i915_irq.[ch] into
display/intel_display_irq.[ch].
v3:
- Preserve [I915_MAX_PIPES] harder (kernel test robot)
v2:
- Rebase
- Preserve [I915_MAX_PIPES] in functions (kernel test robot)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515101738.2399816-3-jani.nikula@intel.com
Type-C PHYs are taking longer than expected for Aux IO Power Enabling.
Workaround: Increase the timeout.
---v2
-change style on how we mention WA [Ankit]
-fix bat error by creating new func that is only called for aux power
well scenarios so we can avoid null pointer error as it is called
everywhere.
--v3
-Add non-default enable_timeout to power well descriptor which avoids
adding more platform checks [Imre]
--v4
-Remove Bspec link from top to bottom remove WA link from commit put it
on comment [Jani]
-enable_timeout in ms and add .fixed_enable_delay too [Imre]
--v5
-move power_wells instead of duplicating them [Imre]
Bspec: 55480
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418131425.1285088-1-suraj.kandpal@intel.com
A lot of places include i915_reg.h implicitly via i915_irq.h, which gets
included implicitly via intel_display_trace.h. Remove the includes from
the headers, and include i915_reg.h and i915_irq.h explicitly where
needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230419094243.366821-1-jani.nikula@intel.com
There's only one reference to the struct intel_dmc members dc_state,
target_dc_state, and allowed_dc_mask within intel_dmc.c, begging the
question why they are under struct intel_dmc to begin with.
Moreover, the only references to i915->display.dmc outside of
intel_dmc.c are to these members.
They don't belong. Move them from struct intel_dmc to struct
i915_power_domains, which seems like a more suitable place.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-1-jani.nikula@intel.com
Rename PIPECONF to TRANSCONF to make it clear what it actually
applies to.
While the usual convention is to pick the earliers name I think
in this case it's more clear to use the later name. Especially
as even the register offset is in the wrong range (0x70000 vs.
0x60000) and thus makes it look like this is per-pipe.
There is one place in gvt that's doing something with TRANSCONF
while iterating with for_each_pipe(). So that might not be doing
the right thing for TRANSCODER_EDP, dunno. Not knowing what it
does I left it as is to avoid breakage.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Display WA #1178 calls us to tweak some magic bits when doing AUX
to an external combo PHY port. Instead of looking to see if the VBT
has declared such a port (which could in theory even alias with a
declared eDP port on the same PHY) just check the real situation
based on the registered encoders.
The only slight chicken vs. egg situation here is during output
probing. But typically we'd register the eDP ports first and so
once we get to probe anything external on the combo PHY we have
already determined if it's eDP or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Not all Dekel PHY registers have a lane instance, so having to specify
this when using them is awkward. It makes more sense to define each PHY
register with its full internal PHY offset where bits 15:12 is the lane
for lane-instanced PHY registers and just a register bank index for other
PHY registers. This way lane-instanced registers can be referred to with
the (tc_port, lane) parameters, while other registers just with a tc_port
parameter.
An additional benefit of this change is to prevent passing a Dekel
register to a generic MMIO access function or vice versa.
v2:
- Fix parameter reuse in the DKL_REG_MMIO definition.
v3:
- Rebase on latest patchset version.
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-3-imre.deak@intel.com
Move the TypeC DKL PHY register definitions to intel_dkl_phy_regs.h.
No functional changes.
v2:
- Move the definitions to a new intel_dkl_phy_regs.h file. (Jani).
v3:
- Rebase on latest patchset version.
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-2-imre.deak@intel.com
Accessing the TypeC DKL PHY registers during modeset-commit,
-verification, DP link-retraining and AUX power well toggling is racy
due to these code paths being concurrent and the PHY register bank
selection register (HIP_INDEX_REG) being shared between PHY instances
(aka TC ports) and the bank selection being not atomic wrt. the actual
PHY register access.
Add the required locking around each PHY register bank selection->
register access sequence.
Kudos to Ville for noticing the race conditions.
v2:
- Add the DKL PHY register accessors to intel_dkl_phy.[ch]. (Jani)
- Make the DKL_REG_TC_PORT macro independent of PHY internals.
- Move initing the DKL PHY lock to a more logical place.
v3:
- Fix parameter reuse in the DKL_REG_TC_PORT definition.
- Document the usage of phy_lock.
v4:
- Fix adding TC_PORT_1 offset in the DKL_REG_TC_PORT definition.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-1-imre.deak@intel.com
Add support for display power wells on MTL. The differences from XE_LPD:
- The AUX HW block is moved to the PICA block, where the registers are on
an always-on power well and the functionality needs to be powered on/off
via the AUX_CH_CTL register: [1], [2]
- The DDI IO power on/off programming sequence is moved to the PHY PLL
enable/disable sequence. [3], [4], [5]
Bspec: [1] 49233, [2] 65247, [3] 64568, [4] 65451, [5] 65450
v2:
- Update the comment in aux power well enable
- Reuse the noop sync fn for aux sync.
- Use REG_BIT for new register bit definitions
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902060342.151824-7-radhakrishna.sripada@intel.com
Pull all the skl+ watermark code (and the dbuf/sagv/ipc code
since it's all sort of intertwined and I'm too lazy to think
of a finer grained split right now) into its own file from the
catch-all intel_pm.c.
Also sneak in the s/dev_priv/i915/ rename while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908191646.20239-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Jani Nikula
Gustavo Sousa
Ville Syrjälä
Luca Coelho
Ravi Kumar Vodapalli
Lucas De Marchi
Imre Deak
Suraj Kandpal
Andrzej Hajda