mirror of https://github.com/torvalds/linux.git
167 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
5c00ff742b |
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
|
Colton Lewis
|
04782e6391 |
perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
For clarity, rename the arch-specific definitions of these functions to perf_arch_* to denote they are arch-specifc. Define the generic-named functions in one place where they can call the arch-specific ones as needed. Signed-off-by: Colton Lewis <coltonlewis@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com |
|
Mike Rapoport (Microsoft)
|
0c3beacf68 |
asm-generic: introduce text-patching.h
Several architectures support text patching, but they name the header files that declare patching functions differently. Make all such headers consistently named text-patching.h and add an empty header in asm-generic for architectures that do not support text patching. Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: kdevops <kdevops@lists.linux.dev> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Song Liu <song@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
Anjali K
|
0300a92e96 |
powerpc/perf: Set cpumode flags using sample address
Currently in some cases, when the sampled instruction address register
latches to a specific address during sampling, the privilege bits
captured in the sampled event register are incorrect.
For example, a snippet from the perf report on a power10 system is:
Overhead Address Command Shared Object Symbol
........ .................. ............ ................. .......................
2.41% 0x7fff9f94a02c null_syscall [unknown] [k] 0x00007fff9f94a02c
2.20% 0x7fff9f94a02c null_syscall libc.so.6 [.] syscall
perf_get_misc_flags() function looks at the privilege bits to return
the corresponding flags to be used for the address symbol and these
privilege bit details are read from the sampled event register. In the
above snippet, address "0x00007fff9f94a02c" is shown as "k" (kernel) due
to the incorrect privilege bits captured in the sampled event register.
To address this case check whether the sampled address is in the kernel
area. Since this is specific to the latest platform, a new pmu flag
is added called "PPMU_P10" and is used to contain the proposed fix.
PPMU_P10_DD1 marked events are also included under PPMU_P10, hence
remove the code specific to PPMU_P10_DD1 marked events.
Signed-off-by: Anjali K <anjalik@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com <mailto:atrajeev@linux.vnet.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240528040356.2722275-1-anjalik@linux.ibm.com
|
|
Christophe Leroy
|
d5835fb60b |
powerpc: Use user_mode() macro when possible
There is a nice macro to check user mode. Use it instead of open coding anding with MSR_PR to increase readability and avoid having to comment what that anding is for. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/fbf74887dcf1f1ba9e1680fc3247cbb581b00662.1708078228.git.christophe.leroy@csgroup.eu |
|
Madhavan Srinivasan
|
b22ea62722 |
powerpc/perf: Power11 Performance Monitoring support
Base enablement patch to register performance monitoring hardware support for Power11. Most of fields are copied from power10_pmu struct for power11_pmu struct. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240221044623.1598642-2-mpe@ellerman.id.au |
|
Peter Zijlstra
|
5d2d4a9f60 |
Merge branch 'tip/perf/urgent'
Avoid conflicts, base on fixes. Signed-off-by: Peter Zijlstra <peterz@infradead.org> |
|
Kan Liang
|
571d91dcad |
perf: Add branch stack counters
Currently, the additional information of a branch entry is stored in a u64 space. With more and more information added, the space is running out. For example, the information of occurrences of events will be added for each branch. Two places were suggested to append the counters. https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/ One place is right after the flags of each branch entry. It changes the existing struct perf_branch_entry. The later ARCH specific implementation has to be really careful to consistently pick the right struct. The other place is right after the entire struct perf_branch_stack. The disadvantage is that the pointer of the extra space has to be recorded. The common interface perf_sample_save_brstack() has to be updated. The latter is much straightforward, and should be easily understood and maintained. It is implemented in the patch. Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate the event which is recorded in the branch info. The "u64 counters" may store the occurrences of several events. The information regarding the number of events/counters and the width of each counter should be exposed via sysfs as a reference for the perf tool. Define the branch_counter_nr and branch_counter_width ABI here. The support will be implemented later in the Intel-specific patch. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com |
|
Nicholas Piggin
|
ea142e590a |
powerpc/perf: Fix disabling BHRB and instruction sampling
When the PMU is disabled, MMCRA is not updated to disable BHRB and
instruction sampling. This can lead to those features remaining enabled,
which can slow down a real or emulated CPU.
Fixes:
|
|
Namhyung Kim
|
eb55b455ef |
perf/core: Add perf_sample_save_brstack() helper
When we saves the branch stack to the perf sample data, we needs to update the sample flags and the dynamic size. To make sure this is done consistently, add the perf_sample_save_brstack() helper and convert all call sites. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230118060559.615653-5-namhyung@kernel.org |
|
|
Peter Zijlstra
|
bd27568117 |
perf: Rewrite core context handling
There have been various issues and limitations with the way perf uses
(task) contexts to track events. Most notable is the single hardware
PMU task context, which has resulted in a number of yucky things (both
proposed and merged).
Notably:
- HW breakpoint PMU
- ARM big.little PMU / Intel ADL PMU
- Intel Branch Monitoring PMU
- AMD IBS PMU
- S390 cpum_cf PMU
- PowerPC trace_imc PMU
*Current design:*
Currently we have a per task and per cpu perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
Each task has an array of pointers to a perf_event_context. Each
perf_event_context has a direct relation to a PMU and a group of
events for that PMU. The task related perf_event_context's have a
pointer back to that task.
Each PMU has a per-cpu pointer to a per-cpu perf_cpu_context, which
includes a perf_event_context, which again has a direct relation to
that PMU, and a group of events for that PMU.
The perf_cpu_context also tracks which task context is currently
associated with that CPU and includes a few other things like the
hrtimer for rotation etc.
Each perf_event is then associated with its PMU and one
perf_event_context.
*Proposed design:*
New design proposed by this patch reduce to a single task context and
a single CPU context but adds some intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
With the new design, perf_event_context will hold all events for all
pmus in the (respective pinned/flexible) rbtrees. This can be achieved
by adding pmu to rbtree key:
{cpu, pmu, cgroup, group_index}
Each perf_event_context carries a list of perf_event_pmu_context which
is used to hold per-pmu-per-context state. For example, it keeps track
of currently active events for that pmu, a pmu specific task_ctx_data,
a flag to tell whether rotation is required or not etc.
Additionally, perf_cpu_pmu_context is used to hold per-pmu-per-cpu
state like hrtimer details to drive the event rotation, a pointer to
perf_event_pmu_context of currently running task and some other
ancillary information.
Each perf_event is associated to it's pmu, perf_event_context and
perf_event_pmu_context.
Further optimizations to current implementation are possible. For
example, ctx_resched() can be optimized to reschedule only single pmu
events.
Much thanks to Ravi for picking this up and pushing it towards
completion.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221008062424.313-1-ravi.bangoria@amd.com
|
|
|
Linus Torvalds
|
3871d93b82 |
Perf events updates for v6.1:
- PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2)
feature support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information,
if available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on
AMD CPUs by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
- HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs and
thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot()
and fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LcGg
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information, if
available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs
and thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key
operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements"
* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
perf: Fix pmu_filter_match()
perf: Fix lockdep_assert_event_ctx()
perf/x86/amd/lbr: Adjust LBR regardless of filtering
perf/x86/utils: Fix uninitialized var in get_branch_type()
perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
perf/x86/amd: Support PERF_SAMPLE_ADDR
perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
perf/x86/uncore: Add new Raptor Lake S support
perf/x86/cstate: Add new Raptor Lake S support
perf/x86/msr: Add new Raptor Lake S support
perf/x86: Add new Raptor Lake S support
bpf: Check flags for branch stack in bpf_read_branch_records helper
perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
perf: Use sample_flags for raw_data
perf: Use sample_flags for addr
...
|
|
Athira Rajeev
|
b9c001276d |
powerpc/perf: Fix branch_filter support for multiple filters
For PERF_SAMPLE_BRANCH_STACK sample type, different branch_sample_type ie branch filters are supported. The branch filters are requested via event attribute "branch_sample_type". Multiple branch filters can be passed in event attribute. eg: $ perf record -b -o- -B --branch-filter any,ind_call true None of the Power PMUs support having multiple branch filters at the same time. Branch filters for branch stack sampling is set via MMCRA IFM bits [32:33]. But currently when requesting for multiple filter types, the "perf record" command does not report any error. eg: $ perf record -b -o- -B --branch-filter any,save_type true $ perf record -b -o- -B --branch-filter any,ind_call true The "bhrb_filter_map" function in PMU driver code does the validity check for supported branch filters. But this check is done for single filter. Hence "perf record" will proceed here without reporting any error. Fix power_pmu_event_init() to return EOPNOTSUPP when multiple branch filters are requested in the event attr. After the fix: $ perf record --branch-filter any,ind_call -- ls Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel<disgoel@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> [mpe: Tweak comment and change log wording] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220921145255.20972-1-atrajeev@linux.vnet.ibm.com |
|
|
Kan Liang
|
e16fd7f2cb |
perf: Use sample_flags for data_src
Use the new sample_flags to indicate whether the data_src field is filled by the PMU driver. Remove the data_src field from the perf_sample_data_init() to minimize the number of cache lines touched. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220901130959.1285717-6-kan.liang@linux.intel.com |
|
|
Kan Liang
|
2abe681da0 |
perf: Use sample_flags for weight
Use the new sample_flags to indicate whether the weight field is filled by the PMU driver. Remove the weight field from the perf_sample_data_init() to minimize the number of cache lines touched. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220901130959.1285717-5-kan.liang@linux.intel.com |
|
|
Kan Liang
|
a9a931e266 |
perf: Use sample_flags for branch stack
Use the new sample_flags to indicate whether the branch stack is filled by the PMU driver. Remove the br_stack from the perf_sample_data_init() to minimize the number of cache lines touched. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220901130959.1285717-4-kan.liang@linux.intel.com |
|
|
Athira Rajeev
|
6320e693d9 |
powerpc/perf: Add support for caps under sysfs in powerpc
Add caps support under "/sys/bus/event_source/devices/<pmu>/" for powerpc. This directory can be used to expose some of the specific features that powerpc PMU supports to the user. Example: pmu_name. The name of PMU registered will depend on platform, say power9 or power10 or it could be Generic Compat PMU. Currently the only way to know which is the registered PMU is from the dmesg logs. But clearing the dmesg will make it difficult to know exact PMU backend used. And even extracting from dmesg will be complicated, as we need to parse the dmesg logs and add filters for pmu name. Whereas by exposing it via caps will make it easy as we just need to directly read it from the sysfs. Add a caps directory to /sys/bus/event_source/devices/cpu/ for power8, power9, power10 and generic compat PMU in respective PMU driver code. Update the pmu_name file under caps folder in core-book3s using "attr_update". The information exposed currently: - pmu_name : Underlying PMU name from the driver Example result with power9 pmu: # ls /sys/bus/event_source/devices/cpu/caps pmu_name # cat /sys/bus/event_source/devices/cpu/caps/pmu_name POWER9 Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220520084630.15181-1-atrajeev@linux.vnet.ibm.com |
|
|
Athira Rajeev
|
890005a7d9 |
powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable
commit |
|
Julia Lawall
|
1fd02f6605 |
powerpc: fix typos in comments
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr |
|
|
Athira Rajeev
|
fb6433b48a |
powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if PMI is pending
Running selftest with CONFIG_PPC_IRQ_SOFT_MASK_DEBUG enabled in kernel triggered below warning: [ 172.851380] ------------[ cut here ]------------ [ 172.851391] WARNING: CPU: 8 PID: 2901 at arch/powerpc/include/asm/hw_irq.h:246 power_pmu_disable+0x270/0x280 [ 172.851402] Modules linked in: dm_mod bonding nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink sunrpc xfs libcrc32c pseries_rng xts vmx_crypto uio_pdrv_genirq uio sch_fq_codel ip_tables ext4 mbcache jbd2 sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp fuse [ 172.851442] CPU: 8 PID: 2901 Comm: lost_exception_ Not tainted 5.16.0-rc5-03218-g798527287598 #2 [ 172.851451] NIP: c00000000013d600 LR: c00000000013d5a4 CTR: c00000000013b180 [ 172.851458] REGS: c000000017687860 TRAP: 0700 Not tainted (5.16.0-rc5-03218-g798527287598) [ 172.851465] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48004884 XER: 20040000 [ 172.851482] CFAR: c00000000013d5b4 IRQMASK: 1 [ 172.851482] GPR00: c00000000013d5a4 c000000017687b00 c000000002a10600 0000000000000004 [ 172.851482] GPR04: 0000000082004000 c0000008ba08f0a8 0000000000000000 00000008b7ed0000 [ 172.851482] GPR08: 00000000446194f6 0000000000008000 c00000000013b118 c000000000d58e68 [ 172.851482] GPR12: c00000000013d390 c00000001ec54a80 0000000000000000 0000000000000000 [ 172.851482] GPR16: 0000000000000000 0000000000000000 c000000015d5c708 c0000000025396d0 [ 172.851482] GPR20: 0000000000000000 0000000000000000 c00000000a3bbf40 0000000000000003 [ 172.851482] GPR24: 0000000000000000 c0000008ba097400 c0000000161e0d00 c00000000a3bb600 [ 172.851482] GPR28: c000000015d5c700 0000000000000001 0000000082384090 c0000008ba0020d8 [ 172.851549] NIP [c00000000013d600] power_pmu_disable+0x270/0x280 [ 172.851557] LR [c00000000013d5a4] power_pmu_disable+0x214/0x280 [ 172.851565] Call Trace: [ 172.851568] [c000000017687b00] [c00000000013d5a4] power_pmu_disable+0x214/0x280 (unreliable) [ 172.851579] [c000000017687b40] [c0000000003403ac] perf_pmu_disable+0x4c/0x60 [ 172.851588] [c000000017687b60] [c0000000003445e4] __perf_event_task_sched_out+0x1d4/0x660 [ 172.851596] [c000000017687c50] [c000000000d1175c] __schedule+0xbcc/0x12a0 [ 172.851602] [c000000017687d60] [c000000000d11ea8] schedule+0x78/0x140 [ 172.851608] [c000000017687d90] [c0000000001a8080] sys_sched_yield+0x20/0x40 [ 172.851615] [c000000017687db0] [c0000000000334dc] system_call_exception+0x18c/0x380 [ 172.851622] [c000000017687e10] [c00000000000c74c] system_call_common+0xec/0x268 The warning indicates that MSR_EE being set(interrupt enabled) when there was an overflown PMC detected. This could happen in power_pmu_disable since it runs under interrupt soft disable condition ( local_irq_save ) and not with interrupts hard disabled. commit |
|
|
Athira Rajeev
|
429a64f6e9 |
powerpc/perf: Only define power_pmu_wants_prompt_pmi() for CONFIG_PPC64
power_pmu_wants_prompt_pmi() is used to decide if PMIs should be taken
promptly. This is valid only for ppc64 and is used only if
CONFIG_PPC_BOOK3S_64=y. Hence include the function under config check
for PPC64.
Fixes warning for 32-bit compilation:
arch/powerpc/perf/core-book3s.c:2455:6: warning: no previous prototype for 'power_pmu_wants_prompt_pmi'
2455 | bool power_pmu_wants_prompt_pmi(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
|
|
Nick Child
|
c49f5d88ff |
powerpc/perf: Add __init attribute to eligible functions
Some functions defined in 'arch/powerpc/perf' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-5-nick.child@ibm.com |
|
|
Nicholas Piggin
|
5a7745b96f |
powerpc/64s/perf: add power_pmu_wants_prompt_pmi to say whether perf wants PMIs to be soft-NMI
Interrupt code enables MSR[EE] in some irq handlers while keeping local irqs disabled via soft-mask, allowing PMI interrupts to be taken as soft-NMI to improve profiling of irq handlers. When perf is not enabled, there is no point to doing this, it's additional overhead. So provide a function that can say if PMIs should be taken promptly if possible. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210922145452.352571-4-npiggin@gmail.com |
|
|
Athira Rajeev
|
2c9ac51b85 |
powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC
Running perf fuzzer showed below in dmesg logs:
"Can't find PMC that caused IRQ"
This means a PMU exception happened, but none of the PMC's (Performance
Monitor Counter) were found to be overflown. There are some corner cases
that clears the PMCs after PMI gets masked. In such cases, the perf
interrupt handler will not find the active PMC values that had caused
the overflow and thus leads to this message while replaying.
Case 1: PMU Interrupt happens during replay of other interrupts and
counter values gets cleared by PMU callbacks before replay:
During replay of interrupts like timer, __do_irq() and doorbell
exception, we conditionally enable interrupts via may_hard_irq_enable().
This could potentially create a window to generate a PMI. Since irq soft
mask is set to ALL_DISABLED, the PMI will get masked here. We could get
IPIs run before perf interrupt is replayed and the PMU events could
be deleted or stopped. This will change the PMU SPR values and resets
the counters. Snippet of ftrace log showing PMU callbacks invoked in
__do_irq():
<idle>-0 [051] dns. 132025441306354: __do_irq <-call_do_irq
<idle>-0 [051] dns. 132025441306430: irq_enter <-__do_irq
<idle>-0 [051] dns. 132025441306503: irq_enter_rcu <-__do_irq
<idle>-0 [051] dnH. 132025441306599: xive_get_irq <-__do_irq
<<>>
<idle>-0 [051] dnH. 132025441307770: generic_smp_call_function_single_interrupt <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441307839: flush_smp_call_function_queue <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441308057: _raw_spin_lock <-event_function
<idle>-0 [051] dnH. 132025441308206: power_pmu_disable <-perf_pmu_disable
<idle>-0 [051] dnH. 132025441308337: power_pmu_del <-event_sched_out
<idle>-0 [051] dnH. 132025441308407: power_pmu_read <-power_pmu_del
<idle>-0 [051] dnH. 132025441308477: read_pmc <-power_pmu_read
<idle>-0 [051] dnH. 132025441308590: isa207_disable_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308663: write_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308787: power_pmu_event_idx <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308859: rcu_read_unlock_strict <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308975: power_pmu_enable <-perf_pmu_enable
<<>>
<idle>-0 [051] dnH. 132025441311108: irq_exit <-__do_irq
<idle>-0 [051] dns. 132025441311319: performance_monitor_exception <-replay_soft_interrupts
Case 2: PMI's masked during local_* operations, example local_add(). If
the local_add() operation happens within a local_irq_save(), replay of
PMI will be during local_irq_restore(). Similar to case 1, this could
also create a window before replay where PMU events gets deleted or
stopped.
Fix it by updating the PMU callback function power_pmu_disable() to
check for pending perf interrupt. If there is an overflown PMC and
pending perf interrupt indicated in paca, clear the PMI bit in paca to
drop that sample. Clearing of PMI bit is done in power_pmu_disable()
since disable is invoked before any event gets deleted/stopped. With
this fix, if there are more than one event running in the PMU, there is
a chance that we clear the PMI bit for the event which is not getting
deleted/stopped. The other events may still remain active. Hence to make
sure we don't drop valid sample in such cases, another check is added in
power_pmu_enable. This checks if there is an overflown PMC found among
the active events and if so enable back the PMI bit. Two new helper
functions are introduced to clear/set the PMI, ie
clear_pmi_irq_pending() and set_pmi_irq_pending(). Helper function
pmi_irq_pending() is introduced to give a warning if there is pending
PMI bit in paca, but no PMC is overflown.
Also there are corner cases which result in performance monitor
interrupts being triggered during power_pmu_disable(). This happens
since PMXE bit is not cleared along with disabling of other MMCR0 bits
in the pmu_disable. Such PMI's could leave the PMU running and could
trigger PMI again which will set MMCR0 PMAO bit. This could lead to
spurious interrupts in some corner cases. Example, a timer after
power_pmu_del() which will re-enable interrupts and triggers a PMI again
since PMAO bit is still set. But fails to find valid overflow since PMC
was cleared in power_pmu_del(). Fix that by disabling PMXE along with
disabling of other MMCR0 bits in power_pmu_disable().
We can't just replay PMI any time. Hence this approach is preferred
rather than replaying PMI before resetting overflown PMC. Patch also
documents core-book3s on a race condition which can trigger these PMC
messages during idle path in PowerNV.
Fixes:
|
|
|
Nicholas Piggin
|
0a4b4327ce |
powerpc/64s: Implement PMU override command line option
It can be useful in simulators (with very constrained environments) to allow some PMCs to run from boot so they can be sampled directly by a test harness, rather than having to run perf. A previous change freezes counters at boot by default, so provide a boot time option to un-freeze (plus a bit more flexibility). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211123095231.1036501-13-npiggin@gmail.com |
|
Kajol Jain
|
3c69a5f222 |
powerpc/perf: Fix the check for SIAR value
Incase of random sampling, there can be scenarios where
Sample Instruction Address Register(SIAR) may not latch
to the sampled instruction and could result in
the value of 0. In these scenarios it is preferred to
return regs->nip. These corner cases are seen in the
previous generation (p9) also.
Patch adds the check for SIAR value along with regs_use_siar
and siar_valid checks so that the function will return
regs->nip incase SIAR is zero.
Patch drops the code under PPMU_P10_DD1 flag check
which handles SIAR 0 case only for Power10 DD1.
Fixes:
|
|
|
Kajol Jain
|
cc90c6742e |
powerpc/perf: Drop the case of returning 0 as instruction pointer
Drop the case of returning 0 as instruction pointer since kernel
never executes at 0 and userspace almost never does either.
Fixes:
|
|
|
Kajol Jain
|
b1643084d1 |
powerpc/perf: Use stack siar instead of mfspr
Minor optimization in the 'perf_instruction_pointer' function code by
making use of stack siar instead of mfspr.
Fixes:
|
|
|
Nicholas Piggin
|
cf9c615cde |
powerpc/64s/perf: Always use SIAR for kernel interrupts
If an interrupt is taken in kernel mode, always use SIAR for it rather than looking at regs_sipr. This prevents samples piling up around interrupt enable (hard enable or interrupt replay via soft enable) in PMUs / modes where the PR sample indication is not in synch with SIAR. This results in better sampling of interrupt entry and exit in particular. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210720141504.420110-1-npiggin@gmail.com |
|
|
Linus Torvalds
|
019b3fd94b |
powerpc updates for 5.14
- A big series refactoring parts of our KVM code, and converting some to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li,
Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique
Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley,
Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun
Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain,
YueHaibing, Zhang Jianhua, Zhen Lei.
-----BEGIN PGP SIGNATURE-----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=zo4d
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A big series refactoring parts of our KVM code, and converting some
to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on
Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.
* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
powerpc: Only build restart_table.c for 64s
powerpc/64s: move ret_from_fork etc above __end_soft_masked
powerpc/64s/interrupt: clean up interrupt return labels
powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
powerpc/64: enable MSR[EE] in irq replay pt_regs
powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
powerpc/64s: add a table of implicit soft-masked addresses
powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
powerpc/64e: fix CONFIG_RELOCATABLE build warnings
powerpc/64s: fix hash page fault interrupt handler
powerpc/4xx: Fix setup_kuep() on SMP
powerpc/32s: Fix setup_{kuap/kuep}() on SMP
powerpc/interrupt: Use names in check_return_regs_valid()
powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
powerpc/ptrace: Refactor regs_set_return_{msr/ip}
powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
powerpc/pseries/vas: Include irqdomain.h
powerpc: mark local variables around longjmp as volatile
...
|
|
|
Athira Rajeev
|
60b7ed54a4 |
powerpc/perf: Fix crash in perf_instruction_pointer() when ppmu is not set
On systems without any specific PMU driver support registered, running
perf record causes Oops.
The relevant portion from call trace:
BUG: Kernel NULL pointer dereference on read at 0x00000040
Faulting instruction address: 0xc0021f0c
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K PREEMPT CMPCPRO
SAF3000 DIE NOTIFICATION
CPU: 0 PID: 442 Comm: null_syscall Not tainted 5.13.0-rc6-s3k-dev-01645-g7649ee3d2957 #5164
NIP: c0021f0c LR: c00e8ad8 CTR: c00d8a5c
NIP perf_instruction_pointer+0x10/0x60
LR perf_prepare_sample+0x344/0x674
Call Trace:
perf_prepare_sample+0x7c/0x674 (unreliable)
perf_event_output_forward+0x3c/0x94
__perf_event_overflow+0x74/0x14c
perf_swevent_hrtimer+0xf8/0x170
__hrtimer_run_queues.constprop.0+0x160/0x318
hrtimer_interrupt+0x148/0x3b0
timer_interrupt+0xc4/0x22c
Decrementer_virt+0xb8/0xbc
During perf record session, perf_instruction_pointer() is called to
capture the sample IP. This function in core-book3s accesses
ppmu->flags. If a platform specific PMU driver is not registered, ppmu
is set to NULL and accessing its members results in a crash. Fix this
crash by checking if ppmu is set.
Fixes:
|
|
|
Christophe Leroy
|
69d4d6e5fd |
powerpc: Don't use 'struct ppc_inst' to reference instruction location
'struct ppc_inst' is an internal representation of an instruction, but in-memory instructions are and will remain a table of 'u32' forever. Replace all 'struct ppc_inst *' used for locating an instruction in memory by 'u32 *'. This removes a lot of undue casts to 'struct ppc_inst *'. It also helps locating ab-use of 'struct ppc_inst' dereference. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fix ppc_inst_next(), use u32 instead of unsigned int] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu |
|
|
Athira Rajeev
|
af31fd0c91 |
powerpc/perf: Expose processor pipeline stage cycles using PERF_SAMPLE_WEIGHT_STRUCT
Performance Monitoring Unit (PMU) registers in powerpc provides information on cycles elapsed between different stages in the pipeline. This can be used for application tuning. On ISA v3.1 platform, this information is exposed by sampling registers. Patch adds kernel support to capture two of the cycle counters as part of perf sample using the sample type: PERF_SAMPLE_WEIGHT_STRUCT. The power PMU function 'get_mem_weight' currently uses 64 bit weight field of perf_sample_data to capture memory latency. But following the introduction of PERF_SAMPLE_WEIGHT_TYPE, weight field could contain 64-bit or 32-bit value depending on the architexture support for PERF_SAMPLE_WEIGHT_STRUCT. Patches uses WEIGHT_STRUCT to expose the pipeline stage cycles info. Hence update the ppmu functions to work for 64-bit and 32-bit weight values. If the sample type is PERF_SAMPLE_WEIGHT, use the 64-bit weight field. if the sample type is PERF_SAMPLE_WEIGHT_STRUCT, memory subsystem latency is stored in the low 32bits of perf_sample_weight structure. Also for CPU_FTR_ARCH_31, capture the two cycle counter information in two 16 bit fields of perf_sample_weight structure. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1616425047-1666-2-git-send-email-atrajeev@linux.vnet.ibm.com |
|
Xiongwei Song
|
7153d4bf0b |
powerpc/traps: Enhance readability for trap types
Define macros to list ppc interrupt types in interttupt.h, replace the reference of the trap hex values with these macros. Referred the hex numbers in arch/powerpc/kernel/exceptions-64e.S, arch/powerpc/kernel/exceptions-64s.S, arch/powerpc/kernel/head_*.S, arch/powerpc/kernel/head_booke.h and arch/powerpc/include/asm/kvm_asm.h. Signed-off-by: Xiongwei Song <sxwjean@gmail.com> [mpe: Resolve conflicts in nmi_disables_ftrace(), fix 40x build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1618398033-13025-1-git-send-email-sxwjean@me.com |
|
|
Madhavan Srinivasan
|
2e2a441d2c |
powerpc/perf: Infrastructure to support checking of attr.config*
Introduce code to support the checking of attr.config* for values which are reserved for a given platform. Performance Monitoring Unit (PMU) configuration registers have fields that are reserved and some specific values for bit fields are reserved. For ex., MMCRA[61:62] is Random Sampling Mode (SM) and value of 0b11 for this field is reserved. Writing non-zero or invalid values in these fields will have unknown behaviours. Patch adds a generic call-back function "check_attr_config" in "struct power_pmu", to be called in event_init to check for attr.config* values for a given platform. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210408074504.248211-1-maddy@linux.ibm.com |
|
|
Athira Rajeev
|
5ae5fbd210 |
powerpc/perf: Fix handling of privilege level checks in perf interrupt context
Running "perf mem record" in powerpc platforms with selinux enabled resulted in soft lockup's. Below call-trace was seen in the logs: CPU: 58 PID: 3751 Comm: sssd_nss Not tainted 5.11.0-rc7+ #2 NIP: c000000000dff3d4 LR: c000000000dff3d0 CTR: 0000000000000000 REGS: c000007fffab7d60 TRAP: 0100 Not tainted (5.11.0-rc7+) ... NIP _raw_spin_lock_irqsave+0x94/0x120 LR _raw_spin_lock_irqsave+0x90/0x120 Call Trace: 0xc00000000fd47260 (unreliable) skb_queue_tail+0x3c/0x90 audit_log_end+0x6c/0x180 common_lsm_audit+0xb0/0xe0 slow_avc_audit+0xa4/0x110 avc_has_perm+0x1c4/0x260 selinux_perf_event_open+0x74/0xd0 security_perf_event_open+0x68/0xc0 record_and_restart+0x6e8/0x7f0 perf_event_interrupt+0x22c/0x560 performance_monitor_exception0x4c/0x60 performance_monitor_common_virt+0x1c8/0x1d0 interrupt: f00 at _raw_spin_lock_irqsave+0x38/0x120 NIP: c000000000dff378 LR: c000000000b5fbbc CTR: c0000000007d47f0 REGS: c00000000fd47860 TRAP: 0f00 Not tainted (5.11.0-rc7+) ... NIP _raw_spin_lock_irqsave+0x38/0x120 LR skb_queue_tail+0x3c/0x90 interrupt: f00 0x38 (unreliable) 0xc00000000aae6200 audit_log_end+0x6c/0x180 audit_log_exit+0x344/0xf80 __audit_syscall_exit+0x2c0/0x320 do_syscall_trace_leave+0x148/0x200 syscall_exit_prepare+0x324/0x390 system_call_common+0xfc/0x27c The above trace shows that while the CPU was handling a performance monitor exception, there was a call to security_perf_event_open() function. In powerpc core-book3s, this function is called from perf_allow_kernel() check during recording of data address in the sample via perf_get_data_addr(). Commit |
|
|
Linus Torvalds
|
b12b472496 |
powerpc updates for 5.12
A large series adding wrappers for our interrupt handlers, so that irq/nmi/user
tracking can be isolated in the wrappers rather than spread in each handler.
Conversion of the 32-bit syscall handling into C.
A series from Nick to streamline our TLB flushing when using the Radix MMU.
Switch to using queued spinlocks by default for 64-bit server CPUs.
A rework of our PCI probing so that it happens later in boot, when more generic
infrastructure is available.
Two small fixes to allow 32-bit little-endian processes to run on 64-bit
kernels.
Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira
Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy,
Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh
Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus
Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan
Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, Zheng
Yongjun.
-----BEGIN PGP SIGNATURE-----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=dB2S
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A large series adding wrappers for our interrupt handlers, so that
irq/nmi/user tracking can be isolated in the wrappers rather than
spread in each handler.
- Conversion of the 32-bit syscall handling into C.
- A series from Nick to streamline our TLB flushing when using the
Radix MMU.
- Switch to using queued spinlocks by default for 64-bit server CPUs.
- A rework of our PCI probing so that it happens later in boot, when
more generic infrastructure is available.
- Two small fixes to allow 32-bit little-endian processes to run on
64-bit kernels.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.
* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
powerpc/perf: Adds support for programming of Thresholding in P10
powerpc/pci: Remove unimplemented prototypes
powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
powerpc/64: Fix stack trace not displaying final frame
powerpc/time: Remove get_tbl()
powerpc/time: Avoid using get_tbl()
spi: mpc52xx: Avoid using get_tbl()
powerpc/syscall: Avoid storing 'current' in another pointer
powerpc/32: Handle bookE debugging in C in syscall entry/exit
powerpc/syscall: Do not check unsupported scv vector on PPC32
powerpc/32: Remove the counter in global_dbcr0
powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
powerpc/syscall: implement system call entry/exit logic in C for PPC32
powerpc/32: Always save non volatile GPRs at syscall entry
powerpc/syscall: Change condition to check MSR_RI
powerpc/syscall: Save r3 in regs->orig_r3
powerpc/syscall: Use is_compat_task()
powerpc/syscall: Make interrupt.c buildable on PPC32
...
|
|
|
Kajol Jain
|
82d2c16b35 |
powerpc/perf: Adds support for programming of Thresholding in P10
Thresholding, a performance monitoring unit feature, can be
used to identify marked instructions which take more than
expected cycles between start event and end event.
Threshold compare (thresh_cmp) bits are programmed in MMCRA
register. In Power9, thresh_cmp bits were part of the
event code. But in case of P10, thresh_cmp are not part of
event code due to inclusion of MMCR3 bits.
Patch here adds an option to use attr.config1 variable
to be used to pass thresh_cmp value to be programmed in
MMCRA register. A new ppmu flag called PPMU_HAS_ATTR_CONFIG1
has been added and this flag is used to notify the use of
attr.config1 variable.
Patch has extended the parameter list of 'compute_mmcr',
to include power_pmu's 'flags' element and parameter list of
get_constraint to include attr.config1 value. It also extend
parameter list of power_check_constraints inorder to pass
perf_event list.
As stated by commit
|
|
|
Athira Rajeev
|
d137845c97 |
powerpc/perf: Record counter overflow always if SAMPLE_IP is unset
While sampling for marked events, currently we record the sample only if the SIAR valid bit of Sampled Instruction Event Register (SIER) is set. SIAR_VALID bit is used for fetching the instruction address from Sampled Instruction Address Register(SIAR). But there are some usecases, where the user is interested only in the PMU stats at each counter overflow and the exact IP of the overflow event is not required. Dropping SIAR invalid samples will fail to record some of the counter overflows in such cases. Example of such usecase is dumping the PMU stats (event counts) after some regular amount of instructions/events from the userspace (ex: via ptrace). Here counter overflow is indicated to userspace via signal handler, and captured by monitoring and enabling I/O signaling on the event file descriptor. In these cases, we expect to get sample/overflow indication after each specified sample_period. Perf event attribute will not have PERF_SAMPLE_IP set in the sample_type if exact IP of the overflow event is not requested. So while profiling if SAMPLE_IP is not set, just record the counter overflow irrespective of SIAR_VALID check. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> [mpe: Reflow comment and if formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1612516492-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com |
|
|
Athira Rajeev
|
e79b76e03b |
powerpc/perf: Expose Performance Monitor Counter SPR's as part of extended regs
Currently Monitor Mode Control Registers and Sampling registers are part of extended regs. Patch adds support to include Performance Monitor Counter Registers (PMC1 to PMC6 ) as part of extended registers. PMCs are saved in the perf interrupt handler as part of per-cpu array 'pmcs' in struct cpu_hw_events. While capturing the register values for extended regs, fetch these saved PMC values. Simplified the PERF_REG_PMU_MASK_300/31 definition to include PMU SPRs MMCR0 to PMC6. Exclude the unsupported SPRs (MMCR3, SIER2, SIER3) from extended mask value for CPU_FTR_ARCH_300 in the new definition. PERF_REG_EXTENDED_MAX is used to check if any index beyond the extended registers is requested in the sample. Have one PERF_REG_EXTENDED_MAX for CPU_FTR_ARCH_300/CPU_FTR_ARCH_31 since perf_reg_validate function already checks the extended mask for the presence of any unsupported register. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1612335337-1888-3-git-send-email-atrajeev@linux.vnet.ibm.com |
|
|
Athira Rajeev
|
91f3469a43 |
powerpc/perf: Include PMCs as part of per-cpu cpuhw_events struct
To support capturing of PMC's as part of extended registers, the value of SPR's PMC1 to PMC6 has to be saved in the starting of PMI interrupt handler. This is needed since we are resetting the overflown PMC before creating sample and hence directly reading SPRN_PMCx in 'perf_reg_value' will be capturing the modified value. To solve this, add a per-cpu array as part of structure cpu_hw_events and use this array to capture PMC values in the perf interrupt handler. Patch also re-factor's the interrupt handler code to use this per-cpu array instead of current local array. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1612335337-1888-2-git-send-email-atrajeev@linux.vnet.ibm.com |
|
|
Nicholas Piggin
|
156b5371a9 |
powerpc/perf: move perf irq/nmi handling details into traps.c
This is required in order to allow more significant differences between NMI type interrupt handlers and regular asynchronous handlers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-20-npiggin@gmail.com |
|
|
Kan Liang
|
2a6c6b7d7a |
perf/core: Add PERF_SAMPLE_WEIGHT_STRUCT
Current PERF_SAMPLE_WEIGHT sample type is very useful to expresses the cost of an action represented by the sample. This allows the profiler to scale the samples to be more informative to the programmer. It could also help to locate a hotspot, e.g., when profiling by memory latencies, the expensive load appear higher up in the histograms. But current PERF_SAMPLE_WEIGHT sample type is solely determined by one factor. This could be a problem, if users want two or more factors to contribute to the weight. For example, Golden Cove core PMU can provide both the instruction latency and the cache Latency information as factors for the memory profiling. For current X86 platforms, although meminfo::latency is defined as a u64, only the lower 32 bits include the valid data in practice (No memory access could last than 4G cycles). The higher 32 bits can be used to store new factors. Add a new sample type, PERF_SAMPLE_WEIGHT_STRUCT, to indicate the new sample weight structure. It shares the same space as the PERF_SAMPLE_WEIGHT sample type. Users can apply either the PERF_SAMPLE_WEIGHT sample type or the PERF_SAMPLE_WEIGHT_STRUCT sample type to retrieve the sample weight, but they cannot apply both sample types simultaneously. Currently, only X86 and PowerPC use the PERF_SAMPLE_WEIGHT sample type. - For PowerPC, there is nothing changed for the PERF_SAMPLE_WEIGHT sample type. There is no effect for the new PERF_SAMPLE_WEIGHT_STRUCT sample type. PowerPC can re-struct the weight field similarly later. - For X86, the same value will be dumped for the PERF_SAMPLE_WEIGHT sample type or the PERF_SAMPLE_WEIGHT_STRUCT sample type for now. The following patches will apply the new factors for the PERF_SAMPLE_WEIGHT_STRUCT sample type. The field in the union perf_sample_weight should be shared among different architectures. A generic name is required, but it's hard to abstract a name that applies to all architectures. For example, on X86, the fields are to store all kinds of latency. While on PowerPC, it stores MMCRA[TECX/TECM], which should not be latency. So a general name prefix 'var$NUM' is used here. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1611873611-156687-2-git-send-email-kan.liang@linux.intel.com |
|
|
Linus Torvalds
|
8a5be36b93 |
powerpc updates for 5.11
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the hashed
page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core do not
share an L2, allowing the scheduler to make better scheduling decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various parts of
the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard
Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David
Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert
Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan
Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh
Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov,
Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior ,
Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König,
Vincent Stehlé, Youling Tang, Zhang Xiaoxu.
-----BEGIN PGP SIGNATURE-----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=Ga3K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Switch to the generic C VDSO, as well as some cleanups of our VDSO
setup/handling code.
- Support for KUAP (Kernel User Access Prevention) on systems using the
hashed page table MMU, using memory protection keys.
- Better handling of PowerVM SMT8 systems where all threads of a core
do not share an L2, allowing the scheduler to make better scheduling
decisions.
- Further improvements to our machine check handling.
- Show registers when unwinding interrupt frames during stack traces.
- Improvements to our pseries (PowerVM) partition migration code.
- Several series from Christophe refactoring and cleaning up various
parts of the 32-bit code.
- Other smaller features, fixes & cleanups.
Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.
* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
powerpc: Add config fragment for disabling -Werror
powerpc/configs: Add ppc64le_allnoconfig target
powerpc/powernv: Rate limit opal-elog read failure message
powerpc/pseries/memhotplug: Quieten some DLPAR operations
powerpc/ps3: use dma_mapping_error()
powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
KVM: PPC: fix comparison to bool warning
KVM: PPC: Book3S: Assign boolean values to a bool variable
powerpc: Inline setup_kup()
powerpc/64s: Mark the kuap/kuep functions non __init
KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
powerpc/xive: Improve error reporting of OPAL calls
powerpc/xive: Simplify xive_do_source_eoi()
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
...
|
|
|
Athira Rajeev
|
aa8e21c053 |
powerpc/perf: Exclude kernel samples while counting events in user space.
Perf event attritube supports exclude_kernel flag to avoid sampling/profiling in supervisor state (kernel). Based on this event attr flag, Monitor Mode Control Register bit is set to freeze on supervisor state. But sometimes (due to hardware limitation), Sampled Instruction Address Register (SIAR) locks on to kernel address even when freeze on supervisor is set. Patch here adds a check to drop those samples. Cc: stable@vger.kernel.org Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606289215-1433-1-git-send-email-atrajeev@linux.vnet.ibm.com |
|
|
Athira Rajeev
|
91668ab7db |
powerpc/perf: MMCR0 control for PMU registers under PMCC=00
PowerISA v3.1 introduces new control bit (PMCCEXT) for restricting access to group B PMU registers in problem state when MMCR0 PMCC=0b00. In problem state and when MMCR0 PMCC=0b00, setting the Monitor Mode Control Register bit 54 (MMCR0 PMCCEXT), will restrict read permission on Group B Performance Monitor Registers (SIER, SIAR, SDAR and MMCR1). When this bit is set to zero, group B registers will be readable. In other platforms (like power9), the older behaviour is retained where group B PMU SPRs are readable. Patch adds support for MMCR0 PMCCEXT bit in power10 by enabling this bit during boot and during the PMU event enable/disable callback functions. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606409684-1589-8-git-send-email-atrajeev@linux.vnet.ibm.com |
|
|
Athira Rajeev
|
f66de7ac48 |
powerpc/perf: Invoke per-CPU variable access with disabled interrupts
The power_pmu_event_init() callback access per-cpu variable (cpu_hw_events) to check for event constraints and Branch Stack (BHRB). Current usage is to disable preemption when accessing the per-cpu variable, but this does not prevent timer callback from interrupting event_init. Fix this by using 'local_irq_save/restore' to make sure the code path is invoked with disabled interrupts. This change is tested in mambo simulator to ensure that, if a timer interrupt comes in during the per-cpu access in event_init, it will be soft masked and replayed later. For testing purpose, introduced a udelay() in power_pmu_event_init() to make sure a timer interrupt arrives while in per-cpu variable access code between local_irq_save/resore. As expected the timer interrupt was replayed later during local_irq_restore called from power_pmu_event_init. This was confirmed by adding breakpoint in mambo and checking the backtrace when timer_interrupt was hit. Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1606814880-1720-1-git-send-email-atrajeev@linux.vnet.ibm.com |
|
|
Athira Rajeev
|
f75e7d73bd |
powerpc/perf: Fix crash with is_sier_available when pmu is not set
On systems without any specific PMU driver support registered, running
'perf record' with —intr-regs will crash ( perf record -I <workload> ).
The relevant portion from crash logs and Call Trace:
Unable to handle kernel paging request for data at address 0x00000068
Faulting instruction address: 0xc00000000013eb18
Oops: Kernel access of bad area, sig: 11 [#1]
CPU: 2 PID: 13435 Comm: kill Kdump: loaded Not tainted 4.18.0-193.el8.ppc64le #1
NIP: c00000000013eb18 LR: c000000000139f2c CTR: c000000000393d80
REGS: c0000004a07ab4f0 TRAP: 0300 Not tainted (4.18.0-193.el8.ppc64le)
NIP [c00000000013eb18] is_sier_available+0x18/0x30
LR [c000000000139f2c] perf_reg_value+0x6c/0xb0
Call Trace:
[c0000004a07ab770] [c0000004a07ab7c8] 0xc0000004a07ab7c8 (unreliable)
[c0000004a07ab7a0] [c0000000003aa77c] perf_output_sample+0x60c/0xac0
[c0000004a07ab840] [c0000000003ab3f0] perf_event_output_forward+0x70/0xb0
[c0000004a07ab8c0] [c00000000039e208] __perf_event_overflow+0x88/0x1a0
[c0000004a07ab910] [c00000000039e42c] perf_swevent_hrtimer+0x10c/0x1d0
[c0000004a07abc50] [c000000000228b9c] __hrtimer_run_queues+0x17c/0x480
[c0000004a07abcf0] [c00000000022aaf4] hrtimer_interrupt+0x144/0x520
[c0000004a07abdd0] [c00000000002a864] timer_interrupt+0x104/0x2f0
[c0000004a07abe30] [c0000000000091c4] decrementer_common+0x114/0x120
When perf record session is started with "-I" option, capturing registers
on each sample calls is_sier_available() to check for the
SIER (Sample Instruction Event Register) availability in the platform.
This function in core-book3s accesses 'ppmu->flags'. If a platform specific
PMU driver is not registered, ppmu is set to NULL and accessing its
members results in a crash. Fix the crash by returning false in
is_sier_available() if ppmu is not set.
Fixes:
|
|
|
Peter Zijlstra
|
20c7775aec |
Merge remote-tracking branch 'origin/master' into perf/core
Further perf/core patches will depend on:
|
|
|
Madhavan Srinivasan
|
2ca13a4cc5 |
powerpc/perf: Use regs->nip when SIAR is zero
In power10 DD1, there is an issue where the SIAR (Sampled Instruction Address Register) is not latching to the sampled address during random sampling. This results in value of 0s in the SIAR. Add a check to use regs->nip when SIAR is zero. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201021085329.384535-5-maddy@linux.ibm.com |