mirror of https://github.com/torvalds/linux.git
183 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
|
|
df9b455633 |
netfs: Fix write oops in generic/346 (9p) and generic/074 (cifs)
In netfslib, a buffered writeback operation has a 'write queue' of folios
that are being written, held in a linear sequence of folio_queue structs.
The 'issuer' adds new folio_queues on the leading edge of the queue and
populates each one progressively; the 'collector' pops them off the
trailing edge and discards them and the folios they point to as they are
consumed.
The queue is required to always retain at least one folio_queue structure.
This allows the queue to be accessed without locking and with just a bit of
barriering.
When a new subrequest is prepared, its ->io_iter iterator is pointed at the
current end of the write queue and then the iterator is extended as more
data is added to the queue until the subrequest is committed.
Now, the problem is that the folio_queue at the leading edge of the write
queue when a subrequest is prepared might have been entirely consumed - but
not yet removed from the queue as it is the only remaining one and is
preventing the queue from collapsing.
So, what happens is that subreq->io_iter is pointed at the spent
folio_queue, then a new folio_queue is added, and, at that point, the
collector is at entirely at liberty to immediately delete the spent
folio_queue.
This leaves the subreq->io_iter pointing at a freed object. If the system
is lucky, iterate_folioq() sees ->io_iter, sees the as-yet uncorrupted
freed object and advances to the next folio_queue in the queue.
In the case seen, however, the freed object gets recycled and put back onto
the queue at the tail and filled to the end. This confuses
iterate_folioq() and it tries to step ->next, which may be NULL - resulting
in an oops.
Fix this by the following means:
(1) When preparing a write subrequest, make sure there's a folio_queue
struct with space in it at the leading edge of the queue. A function
to make space is split out of the function to append a folio so that
it can be called for this purpose.
(2) If the request struct iterator is pointing to a completely spent
folio_queue when we make space, then advance the iterator to the newly
allocated folio_queue. The subrequest's iterator will then be set
from this.
The oops could be triggered using the generic/346 xfstest with a filesystem
on9P over TCP with cache=loose. The oops looked something like:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:_copy_from_iter+0x2db/0x530
...
Call Trace:
<TASK>
...
p9pdu_vwritef+0x3d8/0x5d0
p9_client_prepare_req+0xa8/0x140
p9_client_rpc+0x81/0x280
p9_client_write+0xcf/0x1c0
v9fs_issue_write+0x87/0xc0
netfs_advance_write+0xa0/0xb0
netfs_write_folio.isra.0+0x42d/0x500
netfs_writepages+0x15a/0x1f0
do_writepages+0xd1/0x220
filemap_fdatawrite_wbc+0x5c/0x80
v9fs_mmap_vm_close+0x7d/0xb0
remove_vma+0x35/0x70
vms_complete_munmap_vmas+0x11a/0x170
do_vmi_align_munmap+0x17d/0x1c0
do_vmi_munmap+0x13e/0x150
__vm_munmap+0x92/0xd0
__x64_sys_munmap+0x17/0x20
do_syscall_64+0x80/0xe0
entry_SYSCALL_64_after_hwframe+0x71/0x79
This also fixed a similar-looking issue with cifs and generic/074.
Fixes:
|
|
|
|
665db14d07 |
netfs, cifs: Fix mtime/ctime update for mmapped writes
The cifs flag CIFS_INO_MODIFIED_ATTR, which indicates that the mtime and
ctime need to be written back on close, got taken over by netfs as
NETFS_ICTX_MODIFIED_ATTR to avoid the need to call a function pointer to
set it.
The flag gets set correctly on buffered writes, but doesn't get set by
netfs_page_mkwrite(), leading to occasional failures in generic/080 and
generic/215.
Fix this by setting the flag in netfs_page_mkwrite().
Fixes:
|
|
|
|
35219bc5c7 |
vfs-6.12.netfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvgAKCRCRxhvAZXjc
onQWAQD6IxAKPU0zom2FoWNilvSzPs7WglTtvddX9pu/lT1RNAD/YC/wOLW8mvAv
9oTAmigQDQQhEWdJA9RgLZBiw7k+DAw=
=zWFb
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
|
|
|
|
8f72c31f45 |
vfs-6.12.misc
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEGwAKCRCRxhvAZXjc
ojIuAQC433+hBkvjvmQ7H0r5rgZSjUuCTG3bSmdU7RJmPHUHhwEA85v/NGq53f+W
IhandK6t+Cf0JYpFZ3N0bT88hDYVhQQ=
=9zGL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
|
|
|
8f246b7c0a
|
netfs: Cancel dirty folios that have no storage destination
Kafs wants to be able to cache the contents of directories (and symlinks), but whilst these are downloaded from the server with the FS.FetchData RPC op and similar, the same as for regular files, they can't be updated by FS.StoreData, but rather have special operations (FS.MakeDir, etc.). Now, rather than redownloading a directory's content after each change made to that directory, kafs modifies the local blob. This blob can be saved out to the cache, and since it's using netfslib, kafs just marks the folios dirty and lets ->writepages() on the directory take care of it, as for an regular file. This is fine as long as there's a cache as although the upload stream is disabled, there's a cache stream to drive the procedure. But if the cache goes away in the meantime, suddenly there's no way do any writes and the code gets confused, complains "R=%x: No submit" to dmesg and leaves the dirty folio hanging. Fix this by just cancelling the store of the folio if neither stream is active. (If there's no cache at the time of dirtying, we should just not mark the folio dirty). Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-23-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
c4f1450ecc
|
cachefiles, netfs: Fix write to partial block at EOF
Because it uses DIO writes, cachefiles is unable to make a write to the
backing file if that write is not aligned to and sized according to the
backing file's DIO block alignment. This makes it tricky to handle a write
to the cache where the EOF on the network file is not correctly aligned.
To get around this, netfslib attempts to tell the driver it is calling how
much more data there is available beyond the EOF that it can use to pad the
write (netfslib preclears the part of the folio above the EOF). However,
it tries to tell the cache what the maximum length is, but doesn't
calculate this correctly; and, in any case, cachefiles actually ignores the
value and just skips the block.
Fix this by:
(1) Change the value passed to indicate the amount of extra data that can
be added to the operation (now ->submit_extendable_to). This is much
simpler to calculate as it's just the end of the folio minus the top
of the data within the folio - rather than having to account for data
spread over multiple folios.
(2) Make cachefiles add some of this data if the subrequest it is given
ends at the network file's i_size if the extra data is sufficient to
pad out to a whole block.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-22-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
86b374d061
|
netfs: Remove fs/netfs/io.c
Remove fs/netfs/io.c as it is no longer used. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-21-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
ee4cdf7ba8
|
netfs: Speed up buffered reading
Improve the efficiency of buffered reads in a number of ways:
(1) Overhaul the algorithm in general so that it's a lot more compact and
split the read submission code between buffered and unbuffered
versions. The unbuffered version can be vastly simplified.
(2) Read-result collection is handed off to a work queue rather than being
done in the I/O thread. Multiple subrequests can be processes
simultaneously.
(3) When a subrequest is collected, any folios it fully spans are
collected and "spare" data on either side is donated to either the
previous or the next subrequest in the sequence.
Notes:
(*) Readahead expansion is massively slows down fio, presumably because it
causes a load of extra allocations, both folio and xarray, up front
before RPC requests can be transmitted.
(*) RDMA with cifs does appear to work, both with SIW and RXE.
(*) PG_private_2-based reading and copy-to-cache is split out into its own
file and altered to use folio_queue. Note that the copy to the cache
now creates a new write transaction against the cache and adds the
folios to be copied into it. This allows it to use part of the
writeback I/O code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-20-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
983cdcf8fe
|
netfs: Simplify the writeback code
Use the new folio_queue structures to simplify the writeback code. The problem with referring to the i_pages xarray directly is that we may have gaps in the sequence of folios we're writing from that we need to skip when we're removing the writeback mark from the folios we're writing back from. At the moment the code tries to deal with this by carefully tracking the gaps in each writeback stream (eg. write to server and write to cache) and divining when there's a gap that spans folios (something that's not helped by folios not being a consistent size). Instead, the folio_queue buffer contains pointers only the folios we're dealing with, has them in ascending order and indicates a gap by placing non-consequitive folios next to each other. This makes it possible to track where we need to clean up to by just keeping track of where we've processed to on each stream and taking the minimum. Note that the I/O iterator is always rounded up to the end of the folio, even if that is beyond the EOF position, so that the cache can do DIO from the page. The excess space is cleared, though mmapped writes clobber it. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-18-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
bfaa33b8ba
|
netfs: Provide an iterator-reset function
Provide a function to reset the iterator on a subrequest. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-17-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
cd0277ed0c
|
netfs: Use new folio_queue data type and iterator instead of xarray iter
Make the netfs write-side routines use the new folio_queue struct to hold a rolling buffer of folios, with the issuer adding folios at the tail and the collector removing them from the head as they're processed instead of using an xarray. This will allow a subsequent patch to simplify the write collector. The primary mark (as tested by folioq_is_marked()) is used to note if the corresponding folio needs putting. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-16-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
a86b83f777 |
five smb3 client fixes
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmbbVKkACgkQiiy9cAdy T1FTUgv8C/Qek0abESCC9AEvKUiAGwabOcdvKQnpCjI3eLQVmwGIHXXPdnkgxJmL gUQm4CBj6jWw5OfhBw2BTvnVz9YahQC8Xbg0XfLomaggD8NxVFnQyiWyyjPJtIiQ JRhOqV82Ko2NFMpouwfNTLPLMBpjNp6IrvkAY2bH5vUzPmoC/aU+eQMVXMqTFalD Q+vV2cFBcMsTTsRFCMG0er8114A1XvyG4IKr/95bTDjn/wnOVX9sUGrMbNXuoCsj yzMAkBoc60k2PjGoYMIQJsVDFryz7TpF7wyS2Oo5EkqzR/GKcIYGxTn0AznVhs83 5mAPXgyqpxg3wAsIVAs+vj0Jo2/cfpWuLb9pR5kt3lNA5EH7D1DNzXcHSe8GPvC6 iwrFI0RnR59HbDh1UGOSoVZv/W9cwmam6WG5HpS7YcRYocZqZyv+XjxUTlj2r+nV 12v9nnAWkH2Ub6kf3WHPzeXS3L6mvucody8b01UUL+j8hqWKN67sbXzH0Y2Nv0tv KFgbJCSk =CntT -----END PGP SIGNATURE----- Merge tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull smb client fixes from Steve French: - fix potential mount hang - fix retry problem in two types of compound operations - important netfs integration fix in SMB1 read paths - fix potential uninitialized zero point of inode - minor patch to improve debugging for potential crediting problems * tag 'v6.11-rc6-cifs-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: netfs, cifs: Improve some debugging bits cifs: Fix SMB1 readv/writev callback in the same way as SMB2/3 cifs: Fix zero_point init on inode initialisation smb: client: fix double put of @cfile in smb2_set_path_size() smb: client: fix double put of @cfile in smb2_rename_path() smb: client: fix hang in wait_for_response() for negproto |
|
|
|
22de489d1e
|
netfs: Use bh-disabling spinlocks for rreq->lock
Use bh-disabling spinlocks when accessing rreq->lock because, in the future, it may be twiddled from softirq context when cleanup is driven from cache backend DIO completion. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-12-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
24c90a79f6
|
netfs: Set the request work function upon allocation
Set the work function in the netfs_io_request work_struct when we allocate the request rather than doing this later. This reduces the number of places we need to set it in future code. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-11-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
c57de2a925
|
netfs: Remove NETFS_COPY_TO_CACHE
Remove NETFS_COPY_TO_CACHE as it isn't used anymore. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-10-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
52d55922e0
|
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
Move max_len/max_nr_segs from struct netfs_io_subrequest to struct netfs_io_stream as we only issue one subreq at a time and then don't need these values again for that subreq unless and until we have to retry it - in which case we want to renegotiate them. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-8-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
73425800ac
|
netfs, cifs: Move CIFS_INO_MODIFIED_ATTR to netfs_inode
Move CIFS_INO_MODIFIED_ATTR to netfs_inode as NETFS_ICTX_MODIFIED_ATTR and then make netfs_perform_write() set it. This means that cifs doesn't need to implement the ->post_modify() hook. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-7-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
8f52de0077
|
netfs: Reduce number of conditional branches in netfs_perform_write()
Reduce the number of conditional branches in netfs_perform_write() by merging in netfs_how_to_modify() and then creating a separate if-statement for each way we might modify a folio. Note that this means replicating the data copy in each path. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-6-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
ef966d73fb
|
netfs: Record contention stats for writeback lock
Record statistics for contention upon the writeback serialisation lock that prevents racing writeback calls from causing each other to interleave their writebacks. These can be viewed in /proc/fs/netfs/stats on the WbLock line, with skip=N indicating the number of non-SYNC writebacks skipped and wait=N indicating the number of SYNC writebacks that waited. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-5-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
43ebbf9393
|
netfs: Adjust labels in /proc/fs/netfs/stats
Adjust the labels in /proc/fs/netfs/stats that refer to netfs-specific counters. These currently all begin with "Netfs", but change them to begin with more specific labels. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-4-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
4356ab331c |
vfs-6.11-rc7.fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZtQmqAAKCRCRxhvAZXjc
os+mAP47NBhOecERCJSmS0RFMuRvc0ijxz1642emEthZhtf8qQD/cy56WmGZqEFZ
bfj5v6tGmsxGt4xMDUDNG0pvqba8hwA=
=JBA5
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two netfs fixes for this merge window:
- Ensure that fscache_cookie_lru_time is deleted when the fscache
module is removed to prevent UAF
- Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
Before it used truncate_inode_pages_partial() which causes
copy_file_range() to fail on cifs"
* tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF
mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
|
|
|
|
ab85218910 |
netfs, cifs: Improve some debugging bits
Improve some debugging bits:
(1) The netfslib _debug() macro doesn't need a newline in its format
string.
(2) Display the request debug ID and subrequest index in messages emitted
in smb2_adjust_credits() to make it easier to reference in traces.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
72a6e22c60
|
fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF
The fscache_cookie_lru_timer is initialized when the fscache module
is inserted, but is not deleted when the fscache module is removed.
If timer_reduce() is called before removing the fscache module,
the fscache_cookie_lru_timer will be added to the timer list of
the current cpu. Afterwards, a use-after-free will be triggered
in the softIRQ after removing the fscache module, as follows:
==================================================================
BUG: unable to handle page fault for address: fffffbfff803c9e9
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 21ffea067 P4D 21ffea067 PUD 21ffe6067 PMD 110a7c067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G W 6.11.0-rc3 #855
Tainted: [W]=WARN
RIP: 0010:__run_timer_base.part.0+0x254/0x8a0
Call Trace:
<IRQ>
tmigr_handle_remote_up+0x627/0x810
__walk_groups.isra.0+0x47/0x140
tmigr_handle_remote+0x1fa/0x2f0
handle_softirqs+0x180/0x590
irq_exit_rcu+0x84/0xb0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:default_idle+0xf/0x20
default_idle_call+0x38/0x60
do_idle+0x2b5/0x300
cpu_startup_entry+0x54/0x60
start_secondary+0x20d/0x280
common_startup_64+0x13e/0x148
</TASK>
Modules linked in: [last unloaded: netfs]
==================================================================
Therefore delete fscache_cookie_lru_timer when removing the fscahe module.
Fixes:
|
|
|
|
3c58a9575e |
netfs: Delete subtree of 'fs/netfs' when netfs module exits
In netfs_init() or fscache_proc_init(), we create dentry under 'fs/netfs',
but in netfs_exit(), we only delete the proc entry of 'fs/netfs' without
deleting its subtree. This triggers the following WARNING:
==================================================================
remove_proc_entry: removing non-empty directory 'fs/netfs', leaking at least 'requests'
WARNING: CPU: 4 PID: 566 at fs/proc/generic.c:717 remove_proc_entry+0x160/0x1c0
Modules linked in: netfs(-)
CPU: 4 UID: 0 PID: 566 Comm: rmmod Not tainted 6.11.0-rc3 #860
RIP: 0010:remove_proc_entry+0x160/0x1c0
Call Trace:
<TASK>
netfs_exit+0x12/0x620 [netfs]
__do_sys_delete_module.isra.0+0x14c/0x2e0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
Therefore use remove_proc_subtree() instead of remove_proc_entry() to
fix the above problem.
Fixes:
|
|
|
|
1c48d44146 |
inode: remove __I_DIO_WAKEUP
Afaict, we can just rely on inode->i_dio_count for waiting instead of this awkward indirection through __I_DIO_WAKEUP. This survives LTP dio and xfstests dio tests. Link: https://lore.kernel.org/r/20240816-vfs-misc-dio-v1-1-80fe21a2c710@kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
1da29f2c39 |
netfs, cifs: Fix handling of short DIO read
Short DIO reads, particularly in relation to cifs, are not being handled
correctly by cifs and netfslib. This can be tested by doing a DIO read of
a file where the size of read is larger than the size of the file. When it
crosses the EOF, it gets a short read and this gets retried, and in the
case of cifs, the retry read fails, with the failure being translated to
ENODATA.
Fix this by the following means:
(1) Add a flag, NETFS_SREQ_HIT_EOF, for the filesystem to set when it
detects that the read did hit the EOF.
(2) Make the netfslib read assessment stop processing subrequests when it
encounters one with that flag set.
(3) Return rreq->transferred, the accumulated contiguous amount read to
that point, to userspace for a DIO read.
(4) Make cifs set the flag and clear the error if the read RPC returned
ENODATA.
(5) Make cifs set the flag and clear the error if a short read occurred
without error and the read-to file position is now at the remote inode
size.
Fixes:
|
|
|
|
6a5dcd4877 |
cifs: Fix lack of credit renegotiation on read retry
When netfslib asks cifs to issue a read operation, it prefaces this with a
call to ->clamp_length() which cifs uses to negotiate credits, providing
receive capacity on the server; however, in the event that a read op needs
reissuing, netfslib doesn't call ->clamp_length() again as that could
shorten the subrequest, leaving a gap.
This causes the retried read to be done with zero credits which causes the
server to reject it with STATUS_INVALID_PARAMETER. This is a problem for a
DIO read that is requested that would go over the EOF. The short read will
be retried, causing EINVAL to be returned to the user when it fails.
Fix this by making cifs_req_issue_read() negotiate new credits if retrying
(NETFS_SREQ_RETRYING now gets set in the read side as well as the write
side in this instance).
This isn't sufficient, however: the new credits might not be sufficient to
complete the remainder of the read, so also add an additional field,
rreq->actual_len, that holds the actual size of the op we want to perform
without having to alter subreq->len.
We then rely on repeated short reads being retried until we finish the read
or reach the end of file and make a zero-length read.
Also fix a couple of places where the subrequest start and length need to
be altered by the amount so far transferred when being used.
Fixes:
|
|
|
|
e00e99ba6c
|
netfs: Fix interaction of streaming writes with zero-point tracker
When a folio that is marked for streaming write (dirty, but not uptodate,
with partial content specified in the private data) is written back, the
folio is effectively switched to the blank state upon completion of the
write. This means that if we want to read it in future, we need to reread
the whole folio.
However, if the folio is above the zero_point position, when it is read
back, it will just be cleared and the read skipped, leading to apparent
local corruption.
Fix this by increasing the zero_point to the end of the dirty data in the
folio when clearing the folio state after writeback. This is analogous to
the folio having ->release_folio() called upon it.
This was causing the config.log generated by configuring a cpython tree on
a cifs share to get corrupted because the scripts involved were appending
text to the file in small pieces.
Fixes:
|
|
|
|
950b03d0f6
|
netfs: Fix missing iterator reset on retry of short read
Fix netfs_rreq_perform_resubmissions() to reset before retrying a short
read, otherwise the wrong part of the output buffer will be used.
Fixes:
|
|
|
|
cce6bfa6ca
|
netfs: Fix trimming of streaming-write folios in netfs_inval_folio()
When netfslib writes to a folio that it doesn't have data for, but that
data exists on the server, it will make a 'streaming write' whereby it
stores data in a folio that is marked dirty, but not uptodate. When it
does this, it attaches a record to folio->private to track the dirty
region.
When truncate() or fallocate() wants to invalidate part of such a folio, it
will call into ->invalidate_folio(), specifying the part of the folio that
is to be invalidated. netfs_invalidate_folio(), on behalf of the
filesystem, must then determine how to trim the streaming write record. In
a couple of cases, however, it does this incorrectly (the reduce-length and
move-start cases are switched over and don't, in any case, calculate the
value correctly).
Fix this by making the logic tree more obvious and fixing the cases.
Fixes:
|
|
|
|
7dfc8f0c61
|
netfs: Fix netfs_release_folio() to say no if folio dirty
Fix netfs_release_folio() to say no (ie. return false) if the folio is
dirty (analogous with iomap's behaviour). Without this, it will say yes to
the release of a dirty page by split_huge_page_to_list_to_order(), which
will result in the loss of untruncated data in the folio.
Without this, the generic/075 and generic/112 xfstests (both fsx-based
tests) fail with minimum folio size patches applied[1].
Fixes:
|
|
|
|
92764e8822
|
netfs, ceph: Partially revert "netfs: Replace PG_fscache by setting folio->private and marking dirty"
This partially reverts commit |
|
|
|
e3786b29c5
|
9p: Fix DIO read through netfs
If a program is watching a file on a 9p mount, it won't see any change in
size if the file being exported by the server is changed directly in the
source filesystem, presumably because 9p doesn't have change notifications,
and because netfs skips the reads if the file is empty.
Fix this by attempting to read the full size specified when a DIO read is
requested (such as when 9p is operating in unbuffered mode) and dealing
with a short read if the EOF was less than the expected read.
To make this work, filesystems using netfslib must not set
NETFS_SREQ_CLEAR_TAIL if performing a DIO read where that read hit the EOF.
I don't want to mandatorily clear this flag in netfslib for DIO because,
say, ceph might make a read from an object that is not completely filled,
but does not reside at the end of file - and so we need to clear the
excess.
This can be tested by watching an empty file over 9p within a VM (such as
in the ktest framework):
while true; do read content; if [ -n "$content" ]; then echo $content; break; fi; done < /host/tmp/foo
then writing something into the empty file. The watcher should immediately
display the file content and break out of the loop. Without this fix, it
remains in the loop indefinitely.
Fixes:
|
|
|
|
7b589a9b45
|
netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags
The NETFS_RREQ_USE_PGPRIV2 and NETFS_RREQ_WRITE_TO_CACHE flags aren't used
correctly. The problem is that we try to set them up in the request
initialisation, but we the cache may be in the process of setting up still,
and so the state may not be correct. Further, we secondarily sample the
cache state and make contradictory decisions later.
The issue arises because we set up the cache resources, which allows the
cache's ->prepare_read() to switch on NETFS_SREQ_COPY_TO_CACHE - which
triggers cache writing even if we didn't set the flags when allocating.
Fix this in the following way:
(1) Drop NETFS_ICTX_USE_PGPRIV2 and instead set NETFS_RREQ_USE_PGPRIV2 in
->init_request() rather than trying to juggle that in
netfs_alloc_request().
(2) Repurpose NETFS_RREQ_USE_PGPRIV2 to merely indicate that if caching is
to be done, then PG_private_2 is to be used rather than only setting
it if we decide to cache and then having netfs_rreq_unlock_folios()
set the non-PG_private_2 writeback-to-cache if it wasn't set.
(3) Split netfs_rreq_unlock_folios() into two functions, one of which
contains the deprecated code for using PG_private_2 to avoid
accidentally doing the writeback path - and always use it if
USE_PGPRIV2 is set.
(4) As NETFS_ICTX_USE_PGPRIV2 is removed, make netfs_write_begin() always
wait for PG_private_2. This function is deprecated and only used by
ceph anyway, and so label it so.
(5) Drop the NETFS_RREQ_WRITE_TO_CACHE flag and use
fscache_operation_valid() on the cache_resources instead. This has
the advantage of picking up the result of netfs_begin_cache_read() and
fscache_begin_write_operation() - which are called after the object is
initialised and will wait for the cache to come to a usable state.
Just reverting ae678317b95e[1] isn't a sufficient fix, so this need to be
applied on top of that. Without this as well, things like:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
and:
WARNING: CPU: 13 PID: 3621 at fs/ceph/caps.c:3386
may happen, along with some UAFs due to PG_private_2 not getting used to
wait on writeback completion.
Fixes:
|
|
|
|
8e5ced7804
|
netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag"
This reverts commit |
|
|
|
889ced4c93
|
netfs: clean up after renaming FSCACHE_DEBUG config
Commit 6b8e61472529 ("netfs: Rename CONFIG_FSCACHE_DEBUG to
CONFIG_NETFS_DEBUG") renames the config, but introduces two issues: First,
NETFS_DEBUG mistakenly depends on the non-existing config NETFS, whereas
the actual intended config is called NETFS_SUPPORT. Second, the config
renaming misses to adjust the documentation of the functionality of this
config.
Clean up those two points.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20240731073902.69262-1-lukas.bulwahn@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
f71aa06398
|
fs/netfs/fscache_cookie: add missing "n_accesses" check
This fixes a NULL pointer dereference bug due to a data race which
looks like this:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018
Workqueue: events_unbound netfs_rreq_write_to_cache_work
RIP: 0010:cachefiles_prepare_write+0x30/0xa0
Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10
RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286
RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000
RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438
RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001
R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68
R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00
FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0
Call Trace:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x15d/0x440
? search_module_extables+0xe/0x40
? fixup_exception+0x22/0x2f0
? exc_page_fault+0x5f/0x100
? asm_exc_page_fault+0x22/0x30
? cachefiles_prepare_write+0x30/0xa0
netfs_rreq_write_to_cache_work+0x135/0x2e0
process_one_work+0x137/0x2c0
worker_thread+0x2e9/0x400
? __pfx_worker_thread+0x10/0x10
kthread+0xcc/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Modules linked in:
CR2: 0000000000000008
---[ end trace 0000000000000000 ]---
This happened because fscache_cookie_state_machine() was slow and was
still running while another process invoked fscache_unuse_cookie();
this led to a fscache_cookie_lru_do_one() call, setting the
FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by
fscache_cookie_state_machine(), withdrawing the cookie via
cachefiles_withdraw_cookie(), clearing cookie->cache_priv.
At the same time, yet another process invoked
cachefiles_prepare_write(), which found a NULL pointer in this code
line:
struct cachefiles_object *object = cachefiles_cres_object(cres);
The next line crashes, obviously:
struct cachefiles_cache *cache = object->volume->cache;
During cachefiles_prepare_write(), the "n_accesses" counter is
non-zero (via fscache_begin_operation()). The cookie must not be
withdrawn until it drops to zero.
The counter is checked by fscache_cookie_state_machine() before
switching to FSCACHE_COOKIE_STATE_RELINQUISHING and
FSCACHE_COOKIE_STATE_WITHDRAWING (in "case
FSCACHE_COOKIE_STATE_FAILED"), but not for
FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case
FSCACHE_COOKIE_STATE_ACTIVE").
This patch adds the missing check. With a non-zero access counter,
the function returns and the next fscache_end_cookie_access() call
will queue another fscache_cookie_state_machine() call to handle the
still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.
Fixes:
|
|
|
|
98055bc359
|
netfs: Fault in smaller chunks for non-large folio mappings
As in commit |
|
|
|
212be98aa1
|
netfs: Fix writeback that needs to go to both server and cache
When netfslib is performing writeback (ie. ->writepages), it maintains two
parallel streams of writes, one to the server and one to the cache, but it
doesn't mark either stream of writes as active until it gets some data that
needs to be written to that stream.
This is done because some folios will only be written to the cache
(e.g. copying to the cache on read is done by marking the folios and
letting writeback do the actual work) and sometimes we'll only be writing
to the server (e.g. if there's no cache).
Now, since we don't actually dispatch uploads and cache writes in parallel,
but rather flip between the streams, depending on which has the lowest
so-far-issued offset, and don't wait for the subreqs to finish before
flipping, we can end up in a situation where, say, we issue a write to the
server and this completes before we start the write to the cache.
But because we only activate a stream when we first add a subreq to it, the
result collection code may run before we manage to activate the stream -
resulting in the folio being cleaned and having the writeback-in-progress
mark removed. At this point, the folio no longer belongs to us.
This is only really a problem for folios that need to be written to both
streams - and in that case, the upload to the server is started first,
followed by the write to the cache - and the cache write may see a bad
folio.
Fix this by activating the cache stream up front if there's a cache
available. If there's a cache, then all data is going to be written to it.
Fixes:
|
|
|
|
fcad93360d
|
netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
CONFIG_FSCACHE_DEBUG should have been renamed to CONFIG_NETFS_DEBUG, so do that now. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/1410796.1721333406@warthog.procyon.org.uk cc: Uwe Kleine-König <ukleinek@kernel.org> cc: Christian Brauner <brauner@kernel.org> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
a9d47a50cf
|
netfs: Revert "netfs: Switch debug logging to pr_debug()"
Revert commit
|
|
|
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
|
|
|
83ab4b461e |
vfs-6.10-rc8.fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZo9dYAAKCRCRxhvAZXjc
omYQAP4wELNW5StzljRReC6s/Kzu6IANJQlfFpuGnPIl23iRmwD+Pq433xQqSy5f
uonMBEdxqbOrJM7A6KeHKCyuAKYpNg0=
=zg3n
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"cachefiles:
- Export an existing and add a new cachefile helper to be used in
filesystems to fix reference count bugs
- Use the newly added fscache_ty_get_volume() helper to get a
reference count on an fscache_volume to handle volumes that are
about to be removed cleanly
- After withdrawing a fscache_cache via FSCACHE_CACHE_IS_WITHDRAWN
wait for all ongoing cookie lookups to complete and for the object
count to reach zero
- Propagate errors from vfs_getxattr() to avoid an infinite loop in
cachefiles_check_volume_xattr() because it keeps seeing ESTALE
- Don't send new requests when an object is dropped by raising
CACHEFILES_ONDEMAND_OJBSTATE_DROPPING
- Cancel all requests for an object that is about to be dropped
- Wait for the ondemand_boject_worker to finish before dropping a
cachefiles object to prevent use-after-free
- Use cyclic allocation for message ids to better handle id recycling
- Add missing lock protection when iterating through the xarray when
polling
netfs:
- Use standard logging helpers for debug logging
VFS:
- Fix potential use-after-free in file locks during
trace_posix_lock_inode(). The tracepoint could fire while another
task raced it and freed the lock that was requested to be traced
- Only increment the nr_dentry_negative counter for dentries that are
present on the superblock LRU. Currently, DCACHE_LRU_LIST list is
used to detect this case. However, the flag is also raised in
combination with DCACHE_SHRINK_LIST to indicate that dentry->d_lru
is used. So checking only DCACHE_LRU_LIST will lead to wrong
nr_dentry_negative count. Fix the check to not count dentries that
are on a shrink related list
Misc:
- hfsplus: fix an uninitialized value issue in copy_name
- minix: fix minixfs_rename with HIGHMEM. It still uses kunmap() even
though we switched it to kmap_local_page() a while ago"
* tag 'vfs-6.10-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
minixfs: Fix minixfs_rename with HIGHMEM
hfsplus: fix uninit-value in copy_name
vfs: don't mod negative dentry count when on shrinker list
filelock: fix potential use-after-free in posix_lock_inode
cachefiles: add missing lock protection when polling
cachefiles: cyclic allocation of msg_id to avoid reuse
cachefiles: wait for ondemand_object_worker to finish when dropping object
cachefiles: cancel all requests for the object that is being dropped
cachefiles: stop sending new request when dropping object
cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop
cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie()
cachefiles: fix slab-use-after-free in fscache_withdraw_volume()
netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume()
netfs: Switch debug logging to pr_debug()
|
|
|
|
eeb17984e8
|
Merge patch series "cachefiles: random bugfixes"
libaokun@huaweicloud.com <libaokun@huaweicloud.com> says: This is the third version of this patch series, in which another patch set is subsumed into this one to avoid confusing the two patch sets. (https://patchwork.kernel.org/project/linux-fsdevel/list/?series=854914) We've been testing ondemand mode for cachefiles since January, and we're almost done. We hit a lot of issues during the testing period, and this patch series fixes some of the issues. The patches have passed internal testing without regression. The following is a brief overview of the patches, see the patches for more details. Patch 1-2: Add fscache_try_get_volume() helper function to avoid fscache_volume use-after-free on cache withdrawal. Patch 3: Fix cachefiles_lookup_cookie() and cachefiles_withdraw_cache() concurrency causing cachefiles_volume use-after-free. Patch 4: Propagate error codes returned by vfs_getxattr() to avoid endless loops. Patch 5-7: A read request waiting for reopen could be closed maliciously before the reopen worker is executing or waiting to be scheduled. So ondemand_object_worker() may be called after the info and object and even the cache have been freed and trigger use-after-free. So use cancel_work_sync() in cachefiles_ondemand_clean_object() to cancel the reopen worker or wait for it to finish. Since it makes no sense to wait for the daemon to complete the reopen request, to avoid this pointless operation blocking cancel_work_sync(), Patch 1 avoids request generation by the DROPPING state when the request has not been sent, and Patch 2 flushes the requests of the current object before cancel_work_sync(). Patch 8: Cyclic allocation of msg_id to avoid msg_id reuse misleading the daemon to cause hung. Patch 9: Hold xas_lock during polling to avoid dereferencing reqs causing use-after-free. This issue was triggered frequently in our tests, and we found that anolis 5.10 had fixed it. So to avoid failing the test, this patch is pushed upstream as well. Baokun Li (7): netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume() cachefiles: fix slab-use-after-free in fscache_withdraw_volume() cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie() cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop cachefiles: stop sending new request when dropping object cachefiles: cancel all requests for the object that is being dropped cachefiles: cyclic allocation of msg_id to avoid reuse Hou Tao (1): cachefiles: wait for ondemand_object_worker to finish when dropping object Jingbo Xu (1): cachefiles: add missing lock protection when polling fs/cachefiles/cache.c | 45 ++++++++++++++++++++++++++++- fs/cachefiles/daemon.c | 4 +-- fs/cachefiles/internal.h | 3 ++ fs/cachefiles/ondemand.c | 52 ++++++++++++++++++++++++++++++---- fs/cachefiles/volume.c | 1 - fs/cachefiles/xattr.c | 5 +++- fs/netfs/fscache_volume.c | 14 +++++++++ fs/netfs/internal.h | 2 -- include/linux/fscache-cache.h | 6 ++++ include/trace/events/fscache.h | 4 +++ 10 files changed, 123 insertions(+), 13 deletions(-) Link: https://lore.kernel.org/r/20240628062930.2467993-1-libaokun@huaweicloud.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
7084021c04 |
netfs: drop usage of folio_file_pos
folio_file_pos is only needed for mixed usage of page cache and swap cache, for pure page cache usage, the caller can just use folio_pos instead. It can't be a swap cache page here. Swap mapping may only call into fs through swap_rw and that is not supported for netfs. So just drop it and use folio_pos instead. Link: https://lkml.kernel.org/r/20240521175854.96038-7-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Anna Schumaker <anna@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: NeilBrown <neilb@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Xiubo Li <xiubli@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
|
|
|
85b08b31a2 |
netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume()
Export fscache_put_volume() and add fscache_try_get_volume() helper function to allow cachefiles to get/put fscache_volume via linux/fscache-cache.h. Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240628062930.2467993-2-libaokun@huaweicloud.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
9d66154f73
|
netfs: Fix netfs_page_mkwrite() to flush conflicting data, not wait
Fix netfs_page_mkwrite() to use filemap_fdatawrite_range(), not
filemap_fdatawait_range() to flush conflicting data.
Fixes:
|
|
|
|
a81c98bfa4
|
netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid
Fix netfs_page_mkwrite() to check that folio->mapping is valid once it has
taken the folio lock (as filemap_page_mkwrite() does). Without this,
generic/247 occasionally oopses with something like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:trace_event_raw_event_netfs_folio+0x61/0xc0
...
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x6e/0xa0
? exc_page_fault+0xc2/0xe0
? asm_exc_page_fault+0x22/0x30
? trace_event_raw_event_netfs_folio+0x61/0xc0
trace_netfs_folio+0x39/0x40
netfs_page_mkwrite+0x14c/0x1d0
do_page_mkwrite+0x50/0x90
do_pte_missing+0x184/0x200
__handle_mm_fault+0x42d/0x500
handle_mm_fault+0x121/0x1f0
do_user_addr_fault+0x23e/0x3c0
exc_page_fault+0xc2/0xe0
asm_exc_page_fault+0x22/0x30
This is due to the invalidate_inode_pages2_range() issued at the end of the
DIO write interfering with the mmap'd writes.
Fixes:
|
|
|
|
84dfbc9cad
|
netfs: Delete some xarray-wangling functions that aren't used
Delete some xarray-based buffer wangling functions that are intended for use with bounce buffering, but aren't used because bounce-buffering got deferred to a later patch series. Now, however, the intention is to use something other than an xarray to do this. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240620173137.610345-9-dhowells@redhat.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
|
|
|
6470e0bc6f
|
netfs: Fix early issue of write op on partial write to folio tail
During the writeback procedure, at the end of netfs_write_folio(), pending
write operations are flushed if the amount of write-streaming data stored
in a page is less than the size of the folio because if we haven't modified
a folio to the end, it cannot be contiguous with the following folio...
except if the dirty region of the folio is right at the end of the folio
space.
Fix the test to take the offset into the folio into account as well, such
that if the dirty region runs right up to the end of the folio, we leave
the flushing for later.
Fixes:
|