This will allow sessions with more than CORESIGHT_TRACE_IDS_MAX ETMs
as long as there are fewer than that many ETMs connected to each sink.
Each sink owns its own trace ID map, and any Perf session connecting to
that sink will allocate from it, even if the sink is currently in use by
other users. This is similar to the existing behavior where the dynamic
trace IDs are constant as long as there is any concurrent Perf session
active. It's not completely optimal because slightly more IDs will be
used than necessary, but the optimal solution involves tracking the PIDs
of each session and allocating ID maps based on the session owner. This
is difficult to do with the combination of per-thread and per-cpu modes
and some scheduling issues. The complexity of this isn't likely to worth
it because even with multiple users they'd just see a difference in the
ordering of ID allocations rather than hitting any limits (unless the
hardware does have too many ETMs connected to one sink).
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-15-james.clark@linaro.org
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Resource selector pair 0 is always implemented and reserved. We must not
touch it, even during save/restore for CPU Idle. Rest of the driver is
well behaved. Fix the offending ones.
Reported-by: Yabin Cui <yabinc@google.com>
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20240412142702.2882478-5-suzuki.poulose@arm.com
ETM4x implements TRCQCLTR only when the Q elements are supported
and the Q element filtering is supported (TRCIDR0.QFILT). Access
to the register otherwise could be fatal. Fix this by tracking the
availability, like the others.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-4-suzuki.poulose@arm.com
ETM4x doesn't support Data trace on A class CPUs. As such do not access the
Data trace control registers during CPU idle. This could cause problems for
ETE. While at it, remove all references to the Data trace control registers.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-3-suzuki.poulose@arm.com
When we restore the register state for ETM4x, while coming back
from CPU idle, we hardcode IOMEM access. This is wrong and could
blow up for an ETM with system instructions access (and for ETE).
Fixes: f5bd523690 ("coresight: etm4x: Convert all register accesses")
Reported-by: Yabin Cui <yabinc@google.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Yabin Cui <yabinc@google.com>
Link: https://lore.kernel.org/r/20240412142702.2882478-2-suzuki.poulose@arm.com
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-5-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
There is an unbalanced pm_runtime_enable() in etm4_probe_platform_dev()
when etm4_probe() fails. This problem can be observed via the coresight
etm4 module's (load -> unload -> load) sequence when etm4_probe() fails
in etm4_probe_platform_dev().
[ 63.379943] coresight-etm4x 7040000.etm: Unbalanced pm_runtime_enable!
[ 63.393630] coresight-etm4x 7140000.etm: Unbalanced pm_runtime_enable!
[ 63.407455] coresight-etm4x 7240000.etm: Unbalanced pm_runtime_enable!
[ 63.420983] coresight-etm4x 7340000.etm: Unbalanced pm_runtime_enable!
[ 63.420999] coresight-etm4x 7440000.etm: Unbalanced pm_runtime_enable!
[ 63.441209] coresight-etm4x 7540000.etm: Unbalanced pm_runtime_enable!
[ 63.454689] coresight-etm4x 7640000.etm: Unbalanced pm_runtime_enable!
[ 63.474982] coresight-etm4x 7740000.etm: Unbalanced pm_runtime_enable!
This fixes the above problem - with an explicit pm_runtime_disable() call
when etm4_probe() fails during etm4_probe_platform_dev().
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Fixes: 5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-2-anshuman.khandual@arm.com
skip_power_up is used in etm4_init_arch_data when set lpoverride. So
need to set the value of it before calling using it.
Fixes: 5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240131105423.9519-1-quic_jinlmao@quicinc.com
Now that mode is in struct coresight_device, sets can be wrapped. This
also allows us to add a sanity check that there have been no concurrent
modifications of mode. Currently all usages of local_set() were inside
the device's spin locks so this new warning shouldn't be triggered.
coresight_take_mode() could maybe have been used in place of adding
the warning, but there may be use cases which set the mode to the same
mode which are valid but would fail in coresight_take_mode() because
it requires the device to only be in the disabled state.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-13-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
At the moment the core file contains both sysfs functionality and
core functionality, while the Perf mode is in a separate file in
coresight-etm-perf.c
Many of the functions have ambiguous names like
coresight_enable_source() which actually only work in relation to the
sysfs mode. To avoid further confusion, move everything that isn't core
functionality into the sysfs file and append _sysfs to the ambiguous
functions.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-7-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Most devices use mode, so move the mode definition out of the individual
devices and up to the Coresight device. This will allow the core code to
also know the mode which will be useful in a later commit.
This also fixes the inconsistency of the documentation of the mode field
on the individual device types. For example ETB10 had "this ETB is being
used".
Two devices didn't require an atomic mode type, so these usages have
been converted to atomic_get() and atomic_set() only to make it compile,
but the documentation of the field in struct coresight_device explains
this type of usage.
In the future, manipulation of the mode could be completely moved out of
the individual devices and into the core code because it's almost all
duplicate code, and this change is a step towards that.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-5-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
These warnings would be hit with the following W=1 build change so
initialize all structs properly.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-2-james.clark@arm.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231116173301.708873-10-u.kleine-koenig@pengutronix.de
When cycle counting is enabled, we use a default threshold value i.e 0x100
for the instruction trace cycle counting.
This patch makes the cycle threshold user configurable via perf event
attributes( 'cc_threshold' => event->attr.config3[11:0] ), falling back
to the current default if unspecified.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230921033631.1298723-3-anshuman.khandual@arm.com
This work arounds errata 1490853 on Cortex-A76, and Neoverse-N1, errata
1491015 on Cortex-A77, errata 1502854 on Cortex-X1, and errata 1619801 on
Neoverse-V1, based affected cpus, where software read for TRCIDR3.CCITMIN
field in ETM gets an wrong value.
If software uses the value returned by the TRCIDR3.CCITMIN register field,
then it will limit the range which could be used for programming the ETM.
In reality, the ETM could be programmed with a much smaller value than what
is indicated by the TRCIDR3.CCITMIN field and still function correctly.
If software reads the TRCIDR3.CCITMIN register field, corresponding to the
instruction trace counting minimum threshold, observe the value 0x100 or a
minimum cycle count threshold of 256. The correct value should be 0x4 or a
minimum cycle count threshold of 4.
This work arounds the problem via storing 4 in drvdata->ccitmin on affected
systems where the TRCIDR3.CCITMIN has been 256, thus preserving cycle count
threshold granularity.
These errata information has been updated in Documentation/arch/arm64/silicon-errata.rst,
but without their corresponding configs because these have been implemented
directly in the driver.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[ Fixed location of silicon-errata.rst in commit description ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230921033631.1298723-2-anshuman.khandual@arm.com
etm4_platform_driver (which lives in ".data" contains a reference to
etm4_remove_platform_dev(). So the latter must not be marked with __exit
which results in the function being discarded for a build with
CONFIG_CORESIGHT_SOURCE_ETM4X=y which in turn makes the remove pointer
contain invalid data.
etm4x_amba_driver referencing etm4_remove_amba() has the same issue.
Drop the __exit annotations for the two affected functions and a third
one that is called by the other two.
For reasons I don't understand this isn't catched by building with
CONFIG_DEBUG_SECTION_MISMATCH=y.
Fixes: c23bc382ef ("coresight: etm4x: Refactor probing routine")
Fixes: 5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/all/20230929081540.yija47lsj35xtj4v@pengutronix.de/
Link: https://lore.kernel.org/r/20230929081637.2377335-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Drop ETM4X ACPI ID from the AMBA ACPI device list, and instead just move it
inside the new ACPI devices list detected and used via platform driver.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for ACPI specific changes)
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Tanmay Jagdale <tanmay@marvell.com>
Link: https://lore.kernel.org/r/20230710062500.45147-7-anshuman.khandual@arm.com
Add support for handling MMIO based devices via platform driver. We need to
make sure that :
1) The APB clock, if present is enabled at probe and via runtime_pm ops
2) Use the ETM4x architecture or CoreSight architecture registers to
identify a device as CoreSight ETM4x, instead of relying a white list of
"Peripheral IDs"
The driver doesn't get to handle the devices yet, until we wire the ACPI
changes to move the devices to be handled via platform driver than the
etm4_amba driver.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-5-anshuman.khandual@arm.com
Coresight device pid can be retrieved from its iomem base address, which is
stored in 'struct etm4x_drvdata'. This drops pid argument from etm4_probe()
and 'struct etm4_init_arg'. Instead etm4_check_arch_features() derives the
coresight device pid with a new helper coresight_get_pid(), right before it
is consumed in etm4_hisi_match_pid().
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-4-anshuman.khandual@arm.com
'struct etm4_drvdata' itself can carry the base address before etm4_probe()
gets called. Just drop that redundant argument from etm4_probe().
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-3-anshuman.khandual@arm.com
Allocate and device assign 'struct etmv4_drvdata' earlier during the driver
probe, ensuring that it can be retrieved in power management based runtime
callbacks if required. This will also help in dropping iomem base address
argument from the function etm4_probe() later.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230710062500.45147-2-anshuman.khandual@arm.com
Instead of adding the PIDs forever to the list for the new CPUs, let us detect
a component to be ETMv4 based on the CoreSight CID, DEVTYPE=PE_TRACE and
DEVARCH=ETMv4. This is already done for some of the ETMs. We can extend the PID
matching to match the PIDR2:JEDEC, BIT[3], which must be 1 (RAO) always.
Link: https://lkml.kernel.org/r/20230317030501.1811905-1-anshuman.khandual@arm.com
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: frowand.list@gmail.com
Cc: linux@armlinux.org.uk
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
[ Fixed typo in the description RA0 => RAO ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230605133031.1827626-1-suzuki.poulose@arm.com
etm4_remove_dev() returned zero unconditionally. Make it return void
instead, which makes it clear in the callers that there is no error to
handle. Simplify etm4_remove_platform_dev() accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230518201629.260672-1-u.kleine-koenig@pengutronix.de
mode is stored as a local_t, but it is also passed around a lot as a
plain u32, so use the correct type wherever local_t isn't currently
used. This helps a little bit with readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-3-james.clark@arm.com
CoreSight ETM4x architecture clearly provides ways to identify a device
via registers in the "Management" class, TRCDEVARCH and TRCDEVTYPE. These
registers can be accessed without the Trace domain being powered on.
We additionally added TRCIDR1 as fallback in order to cover for any
ETMs that may not have implemented TRCDEVARCH. So far, nobody has
reported hitting a WARNING we placed to catch such systems.
Also, more importantly it is problematic to access TRCIDR1, which is a
"Trace" register via MMIO access, without clearing the OSLK. But we cannot
mess with the OSLK until we know for sure that this is an ETMv4 device.
Thus, this kind of creates a chicken and egg problem unnecessarily for
systems "which are compliant" to the ETMv4 architecture.
Let us remove the TRCIDR1 fall back check and rely only on TRCDEVARCH.
Fixes: 8b94db1eda ("coresight: etm4x: Use TRCDEVARCH for component discovery")
Cc: stable@vger.kernel.org
Reported-by: Steve Clevenger <scclevenger@os.amperecomputing.com>
Link: https://lore.kernel.org/all/143540e5623d4c7393d24833f2b80600d8d745d2.1677881753.git.scclevenger@os.amperecomputing.com/
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230321104530.1547136-1-suzuki.poulose@arm.com
CoreSight sources provide a callback (.trace_id) in the standard source
ops which returns the ID to the core code. This was used to check that
sources all had a unique Trace ID.
Uniqueness is now gauranteed by the Trace ID allocation system, and the
check code has been removed from the core.
This patch removes the unneeded and unused .trace_id source ops
from the ops structure and implementations in etm3x, etm4x and stm.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-8-mike.leach@linaro.org
The trace ID API is now used to allocate trace IDs for ETM4.x / ETE
devices.
For perf sessions, these will be allocated on enable, and released on
disable.
For sysfs sessions, these will be allocated on enable, but only released
on reset. This allows the sysfs session to interrogate the Trace ID used
after the session is over - maintaining functional consistency with the
previous allocation scheme.
The trace ID will also be allocated on read of the mgmt/trctraceid file.
This ensures that if perf or sysfs read this before enabling trace, the
value will be the one used for the trace session.
Trace ID initialisation is removed from the _probe() function.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-6-mike.leach@linaro.org
The TRCSEQRSTEVR and TRCSEQSTR registers are not implemented if the
TRCIDR5.NUMSEQSTATE == 0. Skip accessing the registers in such cases.
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114091632.60095-1-hejunhao3@huawei.com
etm4x devices cannot be successfully probed when their CPU is offline.
For example, when booting with maxcpus=n, ETM probing will fail on
CPUs >n, and the probing won't be reattempted once the CPUs come
online. This will leave those CPUs unable to make use of ETM.
This change adds a mechanism to delay the probing if the corresponding
CPU is offline, and to try it again when the CPU comes online.
Signed-off-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220705145935.24679-1-tamas.zsoldos@arm.com
After the conversion to automatically generating the ID_AA64DFR0_EL1
definition names, the build fails in a few different places because some
of the definitions were not changed to their new names along the way.
Update the names to resolve the build errors.
Fixes: c0357a73fa ("arm64/sysreg: Align field names in ID_AA64DFR0_EL1 with architecture")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220919160928.3905780-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic
version of the MMIO accessors, which is intended to help
understand problems with device drivers and has been part
of Qualcomm's vendor kernels for many years.
- A patch from Sebastian Siewior to rework the handling of
IRQ stacks in softirqs across architectures, which is
needed for enabling PREEMPT_RT.
- The last patch to remove the CONFIG_VIRT_TO_BUS option and
some of the code behind that, after the last users of this
old interface made it in through the netdev, scsi, media and
staging trees.
-----BEGIN PGP SIGNATURE-----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=aTR0
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
When enabled, all taken branch addresses are output, even if the branch
was because of a direct branch instruction. This enables reconstruction
of the program flow without having access to the memory image of the
code being executed.
Use bit 8 for the config option which would be the correct bit for
programming ETMv3. Although branch broadcast can't be enabled on ETMv3
because it's not in the define ETM3X_SUPPORTED_OPTIONS, using the
correct bit might help prevent future collisions or allow it to be
enabled if needed.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220511144601.2257870-2-james.clark@arm.com
Per discussion in [1], it was decided to move to using architecture
independent/asm-generic IO memory barriers to have just one set of
them and deprecate use of arm64 specific IO memory barriers in driver
code. So replace current usage of __io_rmb()/__iowmb() in drivers to
__io_ar()/__io_bw().
[1] https://lore.kernel.org/lkml/CAK8P3a0L2tLeF1Q0+0ijUxhGNaw+Z0fyPC1oW6_ELQfn0=i4iw@mail.gmail.com/
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-13-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-10-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-7-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-6-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-5-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-4-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-3-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is a no-op change for style and consistency and has no effect on
the binary output by the compiler. In sysreg.h fields are defined as
the register name followed by the field name and then _MASK. This
allows for grepping for fields by name rather than using magic numbers.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220304171913.2292458-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The spec says this:
P0 tracing support field. The permitted values are:
0b00 Tracing of load and store instructions as P0 elements is not
supported.
0b11 Tracing of load and store instructions as P0 elements is
supported, so TRCCONFIGR.INSTP0 is supported.
All other values are reserved.
The value we are looking for is 0b11 so simplify this. The double read
and && was a bit obfuscated.
Suggested-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220203115336.119735-2-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Adds configfs attributes to allow a configuration to be enabled for use
when sysfs is used to control CoreSight.
perf retains independent enabling of configurations.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20211124200038.28662-6-mike.leach@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
James Clark
Linus Torvalds
Suzuki K Poulose
Krzysztof Kozlowski
Anshuman Khandual
Mao Jinlong
Uwe Kleine-König
Steve Clevenger
Mike Leach
Junhao He
Jilin Yuan
Tamas Zsoldos
Nathan Chancellor
Sai Prakash Ranjan
Leo Yan