Declare and initialize structure variables to zero values so that we can
remove zeroout memset calls in the host/core.c.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that only one caller is left remove the helpers by restructuring
nvme_pr_command so that it has two helpers for sending a command of to a
given nsid using either the ns_head for multipath, or the namespace
stored in the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Split multipath support out of nvme_report_zones into a separate helper
and simplify the non-multipath version as a result.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
In our application, we need a way to force TCP connections to go out a
specific IP interface instead of letting Linux select the interface
based on the routing tables.
Add the 'host-iface' option to allow specifying the interface to use.
When the option host-iface is specified, the driver uses the specified
interface to set the option SO_BINDTODEVICE on the TCP socket before
connecting.
This new option is needed in addtion to the existing host-traddr for
the following reasons:
Specifying an IP interface by its associated IP address is less
intuitive than specifying the actual interface name and, in some cases,
simply doesn't work. That's because the association between interfaces
and IP addresses is not predictable. IP addresses can be changed or can
change by themselves over time (e.g. DHCP). Interface names are
predictable [1] and will persist over time. Consider the following
configuration.
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 100.0.0.100/24 scope global lo
valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ...
link/ether 08:00:27:21:65:ec brd ff:ff:ff:ff:ff:ff
inet 100.0.0.100/24 scope global enp0s3
valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ...
link/ether 08:00:27:4f:95:5c brd ff:ff:ff:ff:ff:ff
inet 100.0.0.100/24 scope global enp0s8
valid_lft forever preferred_lft forever
The above is a VM that I configured with the same IP address
(100.0.0.100) on all interfaces. Doing a reverse lookup to identify the
unique interface associated with 100.0.0.100 does not work here. And
this is why the option host_iface is required. I understand that the
above config does not represent a standard host system, but I'm using
this to prove a point: "We can never know how users will configure
their systems". By te way, The above configuration is perfectly fine
by Linux.
The current TCP implementation for host_traddr performs a
bind()-before-connect(). This is a common construct to set the source
IP address on a TCP socket before connecting. This has no effect on how
Linux selects the interface for the connection. That's because Linux
uses the Weak End System model as described in RFC1122 [2]. On the other
hand, setting the Source IP Address has benefits and should be supported
by linux-nvme. In fact, setting the Source IP Address is a mandatory
FedGov requirement (e.g. connection to a RADIUS/TACACS+ server).
Consider the following configuration.
$ ip addr list dev enp0s8
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ...
link/ether 08:00:27:4f:95:5c brd ff:ff:ff:ff:ff:ff
inet 192.168.56.101/24 brd 192.168.56.255 scope global enp0s8
valid_lft 426sec preferred_lft 426sec
inet 192.168.56.102/24 scope global secondary enp0s8
valid_lft forever preferred_lft forever
inet 192.168.56.103/24 scope global secondary enp0s8
valid_lft forever preferred_lft forever
inet 192.168.56.104/24 scope global secondary enp0s8
valid_lft forever preferred_lft forever
Here we can see that several addresses are associated with interface
enp0s8. By default, Linux always selects the default IP address,
192.168.56.101, as the source address when connecting over interface
enp0s8. Some users, however, want the ability to specify a different
source address (e.g., 192.168.56.102, 192.168.56.103, ...). The option
host_traddr can be used as-is to perform this function.
In conclusion, I believe that we need 2 options for TCP connections.
One that can be used to specify an interface (host-iface). And one that
can be used to set the source address (host-traddr). Users should be
allowed to use one or the other, or both, or none. Of course, the
documentation for host_traddr will need some clarification. It should
state that when used for TCP connection, this option only sets the
source address. And the documentation for host_iface should say that
this option is only available for TCP connections.
References:
[1] https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/
[2] https://tools.ietf.org/html/rfc1122
Tested both IPv4 and IPv6 connections.
Signed-off-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The algorithm that was used until now for building the APST configuration
table has been found to produce entries with excessively long ITPT
(idle time prior to transition) for devices declaring relatively long
entry and exit latencies for non-operational power states. This leads
to unnecessary waste of power and, as a result, failure to pass
mandatory power consumption tests on Chromebook platforms.
The new algorithm is based on two predefined ITPT values and two
predefined latency tolerances. Based on these values, as well as on
exit and entry latencies reported by the device, the algorithm looks
for up to 2 suitable non-operational power states to use as primary
and secondary APST transition targets. The predefined values are
supplied to the nvme driver as module parameters:
- apst_primary_timeout_ms (default: 100)
- apst_secondary_timeout_ms (default: 2000)
- apst_primary_latency_tol_us (default: 15000)
- apst_secondary_latency_tol_us (default: 100000)
The algorithm echoes the approach used by Intel's and Microsoft's drivers
on Windows. The specific default parameter values are also based on those
drivers. Yet, this patch doesn't introduce the ability to dynamically
regenerate the APST table in the event of switching the power source from
AC to battery and back. Adding this functionality may be considered in the
future. In the meantime, the timeouts and tolerances reflect a compromise
between values used by Microsoft for AC and battery scenarios.
In most NVMe devices the new algorithm causes them to implement a more
aggressive power saving policy. While beneficial in most cases, this
sometimes comes at the price of a higher IO processing latency in certain
scenarios as well as at the price of a potential impact on the drive's
endurance (due to more frequent context saving when entering deep non-
operational states). So in order to provide a fallback for systems where
these regressions cannot be tolerated, the patch allows to revert to
the legacy behavior by setting either apst_primary_timeout_ms or
apst_primary_latency_tol_us parameter to 0. Eventually (and possibly after
fine tuning the default values of the module parameters) the legacy behavior
can be removed.
TESTING.
The new algorithm has been extensively tested. Initially, simulations were
used to compare APST tables generated by old and new algorithms for a wide
range of devices. After that, power consumption, performance and latencies
were measured under different workloads on devices from multiple vendors
(WD, Intel, Samsung, Hynix, Kioxia). Below is the description of the tests
and the findings.
General observations.
The effect the patch has on the APST table varies depending on the entry and
exit latencies advertised by the devices. For some devices, the effect is
negligible (e.g. Kioxia KBG40ZNS), for some significant, making the
transitions to PS3 and PS4 much quicker (e.g. WD SN530, Intel 760P), or making
the sleep deeper, PS4 rather than PS3 after a similar amount of time (e.g.
SK Hynix BC511). For some devices (e.g. Samsung PM991) the effect is mixed:
the initial transition happens after a longer idle time, but takes the device
to a lower power state.
Workflows.
In order to evaluate the patch's effect on the power consumption and latency,
7 workflows were used for each device. The workflows were designed to test
the scenarios where significant differences between the old and new behaviors
are most likely. Each workflow was tested twice: with the new and with the
old APST table generation implementation. Power consumption, performance and
latency were measured in the process. The following workflows were used:
1) Consecutive write at the maximum rate with IO depth of 2, with no pauses
2) Repeated pattern of 1000 consecutive writes of 4K packets followed by 50ms
idle time
3) Repeated pattern of 1000 consecutive writes of 4K packets followed by 150ms
idle time
4) Repeated pattern of 1000 consecutive writes of 4K packets followed by 500ms
idle time
5) Repeated pattern of 1000 consecutive writes of 4K packets followed by 1.5s
idle time
6) Repeated pattern of 1000 consecutive writes of 4K packets followed by 5s
idle time
7) Repeated pattern of a single random read of a 4K packet followed by 150ms
idle time
Power consumption
Actual power consumption measurements produced predictable results in
accordance with the APST mechanism's theory of operation.
Devices with long entry and exit latencies such as WD SN530 showed huge
improvement on scenarios 4,5 and 6 of up to 62%. Devices such as Kioxia
KBG40ZNS where the resulting APST table looks virtually identical with
both legacy and new algorithms, showed little or no change in the average power
consumption on all workflows. Devices with extra short latencies such as
Samsung PM991 showed moderate increase in power consumption of up to 18% in
worst case scenarios.
In addition, on Intel and Samsung devices a more complex impact was observed
on scenarios 3, 4 and 7. Our understanding is that due to longer stay in deep
non-operational states between the writes the devices start performing background
operations leading to an increase of power consumption. With the old APST tables
part of these operations are delayed until the scenario is over and a longer idle
period begins, but eventually this extra power is consumed anyway.
Performance.
In terms of performance measured on sustained write or read scenarios, the
effect of the patch is minimal as in this case the device doesn't enter low power
states.
Latency
As expected, in devices where the patch causes a more aggressive power saving
policy (e.g. WD SN530, Intel 760P), an increase in latency was observed in
certain scenarios. Workflow number 7, specifically designed to simulate the
worst case scenario as far as latency is concerned, indeed shows a sharp
increase in average latency (~2ms -> ~53ms on Intel 760P and 0.6 -> 10ms on
WD SN530). The latency increase on other workloads and other devices is much
milder or non-existent.
Signed-off-by: Alexey Bogoslavsky <alexey.bogoslavsky@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Automatically set the GENHD_FL_EXT_DEVT flag for all disks allocated
without an explicit number of minors. This is what all new block
drivers should do, so make sure it is the default without boilerplate
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210521055116.1053587-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
queue_rq() in pci only checks if the dispatched queue (nvmeq) is ready,
e.g. not being suspended. Since nvme_alloc_admin_tags() in reset flow
restarts the admin queue, users are able to submit admin commands to a
controller before reset_work() completes. Commands submitted under this
condition may interfere with commands that performs identify, IO queue
setup in reset_work(), and may result in a hang described in the
following patch.
As seen in the fabrics, user commands are prevented from being executed
under inproper controller states. We may reuse this logic to maintain a
clear admin queue during reset_work().
Signed-off-by: Tao Chiu <taochiu@synology.com>
Signed-off-by: Cody Wong <codywong@synology.com>
Reviewed-by: Leon Chien <leonchien@synology.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_clear_nvme_request() clears the nvme_command, which is unncessary
for passthrough requests as nvme_command is overwritten immediately.
Move clearing part from this helper to the caller, so that double memset
for passthrough requests is avoided.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In multipath case, we should consider namespace attachment with
controllers in a subsystem when we find out the live controller for the
namespace. This patch manually reverted the commit 3557a44097
("nvme: don't bother to look up a namespace for controller ioctls") with
few more updates to nvme_ns_head_chr_ioctl which has been newly updated.
Fixes: 3557a44097 ("nvme: don't bother to look up a namespace for
controller ioctls")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Userspace has not been allowed to I/O to device that's failed to
be initialized. This patch introduces generic per-namespace character
device to allow userspace to I/O regardless the block device is there or
not.
The chardev naming convention will similar to the existing blkdev naming,
using a ng prefix instead of nvme, i.e.
- /dev/ngXnY
It also supports multipath which means it will not expose chardev for the
hidden namespace blkdevs (e.g., nvmeXcYnZ). If /dev/ngXnY is created for
a ns_head, then I/O request will be routed to a specific controller
selected by the iopolicy of the subsystem.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove a level of indentation from the main code implementating the table
search by using a goto for the APST not supported case. Also move the
main comment above the function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Do not call nvme_configure_apst when the controller is not live, given
that nvme_configure_apst will fail due the lack of an admin queue when
the controller is being torn down and nvme_set_latency_tolerance is
called from dev_pm_qos_hide_latency_tolerance.
Fixes: 510a405d945b("nvme: fix memory leak for power latency tolerance")
Reported-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add a 'kato' controller sysfs attribute to display the current
keep-alive timeout value (if any). This allows userspace to identify
persistent discovery controllers, as these will have a non-zero
KATO value.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
According to the NVMe base spec the KATO commands should be sent
at half of the KATO interval, to properly account for round-trip
times.
As we now will only ever send one KATO command per connection we
can easily use the recommended values.
This also fixes a potential issue where the request timeout for
the KATO command does not match the value in the connect command,
which might be causing spurious connection drops from the target.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Adding entry for dev_attr_fast_io_fail_tmo to avoid the kernel crash
while reading and writing the fast_io_fail_tmo.
Fixes: 09fbed6363 (nvme: export fast_io_fail_tmo to sysfs)
Signed-off-by: Gopal Tiwari <gtiwari@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead of failing to scan the namespace entirely when unsupported
features are detected, just mark the gendisk hidden but allow other
access like the upcoming per-namespace character device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
These will be reused for the per-namespace character devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Move the multipath block_device_operations to multipath.c, where they
belong.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Split out the ioctl code from core.c into a new file. Also update
copyrights while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Don't bother to look up a namespace just to drop if after retreiving the
controller for the multipath case. Just look up a live controller for
the subsystem directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Only use the existing ioctl handler for the multipath case, and add a
simpler one that reverts to the pre-multipath case for not shared
use case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Don't bother defining a separate compat_ioctl handler, and just handle
the NVME_IOCTL_SUBMIT_IO32 case inline. Also only defined it for those
ABIs (currently just i386 vs x86_64) that are affected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Factor out a helper for the namespace based ioctls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Pass the proper user pointer instead of the not all that useful integer
representation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Return false from nvme_set_disk_name and let the caller set the
non-multipath name instead of duplicating the naming information in two
places. Also remove the pointless local variables for the disk name
and flags and the not needed ctrl argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Move the multipath gendisk out of #ifdef CONFIG_NVME_MULTIPATH and add
a new nvme_ns_head_multipath that uses it to check if a ns_head has
a multipath device associated with it.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: added the IS_ENABLED, converted a few existing users]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
There is a single trailing whitespace in core.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
Instead of triggering an integer overflow and undefined behavior if MDTS is
large, set max_hw_sectors to UINT_MAX.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[hch: rebased to account for the new nvme_mps_to_sectors helper]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.
The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a passthru command targets a specific namespace, the ns parameter to
nvme_user_cmd()/nvme_user_cmd64() is set. However, there is currently no
validation that the nsid specified in the passthru command targets the
namespace/nsid represented by the block device that the ioctl was
performed on.
Add a check that validates that the nsid in the passthru command matches
that of the supplied namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 8c4dfea97f ("nvme-fabrics: reject I/O to offline device")
introduced fast_io_fail_tmo but didn't export the value to sysfs. The
value can be set during the 'nvme connect'. Export the timeout value
to user space via sysfs to allow runtime configuration.
Cc: Victor Gladkov <Victor.Gladkov@kioxia.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhaani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If there is an error we will leave the function early. So there
is no need for an else. Remove it.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We don't need to repeatedly spam the kernel logs with the same warning
about unhandled passthrough IO effects. Just one warning is sufficient
to observe this condition occurs.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
All nvme transport drivers preallocate an nvme command for each request.
Assume to use that command for nvme_setup_cmd() instead of requiring
drivers pass a pointer to it. All nvme drivers must initialize the
generic nvme_request 'cmd' to point to the transport's preallocated
nvme_command.
The generic nvme_request cmd pointer had previously been used only as a
temporary copy for passthrough commands. Since it now points to the
command that gets dispatched, passthrough commands must directly set it
up prior to executing the request.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and
nvme_pr_release() after variable declaration which follows the rest of
the code in the nvme/host/core.c.
No functional change(s) in this patch.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_clear_request() has a check for flag REQ_DONTPREP and it is called
from nvme_init_request() and nvme_setuo_cmd().
The function nvme_init_request() is called from nvme_alloc_request()
and nvme_alloc_request_qid(). From these two callers new request is
allocated everytime. For newly allocated request RQF_DONTPREP is never
set. Since after getting a tag, block layer sets the req->rq_flags == 0
and never sets the REQ_DONTPREP when returning the request :-
nvme_alloc_request()
blk_mq_alloc_request()
blk_mq_rq_ctx_init()
rq->rq_flags = 0 <----
nvme_alloc_request_qid()
blk_mq_alloc_request_hctx()
blk_mq_rq_ctx_init()
rq->rq_flags = 0 <----
The block layer does set req->rq_flags but REQ_DONTPREP is not one of
them and that is set by the driver.
That means we can unconditinally set the REQ_DONTPREP value to the
rq->rq_flags when nvme_init_request()->nvme_clear_request() is called
from above two callers.
Move the check for REQ_DONTPREP from nvme_clear_nvme_request() into
nvme_setup_cmd().
This is needed since nvme_alloc_request() now gets called from fast
path when NVMeOF target is configured with passthru backend to avoid
unnecessary checks in the fast path.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since nvmet_setup_passthru() function falls in fast path when called
from the NVMeOF passthru backend, make it inline.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function nvme_init_ctrl_finish() (formerly nvme_init_identify()) has
grown over the period of time about ~200 lines given the size of nvme id
ctrl data structure.
Move the nvme_id_ctrl data structure related initilzation into helper
nvme_init_identify() and call it from nvme_init_ctrl_finish().
When we move the code into nvme_init_identify() change the local
variable i from int to unsigned int and remove the duplicate kfree()
after nvme_mpath_init() and jump to the label out_free if
nvme_mpath_ini() fails.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a prep patch so that we can move the identify data structure
related code initialization from nvme_init_identify() into a helper.
Rename the function nvmet_init_identify() to nvmet_init_ctrl_finish().
Next patch will move the nvme_id_ctrl related initialization from newly
renamed function nvme_init_ctrl_finish() into the nvme_init_identify()
helper.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For passthrough I/O commands, effects are usually to be zero.
nvme_passthrough_end() does three checks in futility for this case.
Bail out of function-call/checks.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We voluntarily limit the Write Zeroes sizes to the MDTS value provided by
the hardware, but currently get the units wrong, so fix that.
Fixes: 6e02318eae ("nvme: add support for the Write Zeroes command")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
To avoid an error recovery deadlock where the keep alive work is waiting
for a request and thus can't be flushed to make progress for tearing down
the controller. Also print the error code returned from
blk_mq_alloc_request to help debugging any future issues in this code.
Based on an earlier patch from Hannes Reinecke <hare@suse.de>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Merge nvme_keep_alive into its only caller to prepare for additional
changes to this code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
ns can be NULL at this point, and my move of the check from
the original patch by Chaitanya broke this.
Fixes: 0ec84df495 ("nvme-core: check ctrl css before setting up zns")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure multiple Command Sets are supported before starting to setup a
ZNS namespace.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: move the check around a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVME_REQ_CANCELLED is translated into -EINTR in nvme_submit_sync_cmd(),
so we should be setting this flags during nvme_cancel_request() to
ensure that the callers to nvme_submit_sync_cmd() will get the correct
error code when the controller is reset.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We only should remove namespaces when we get fatal error back from
the device or when the namespace IDs have changed.
So instead of painfully masking out error numbers which might indicate
that the error should be ignored we could use an NVME status code
to indicated when the namespace should be removed.
That simplifies the final logic and makes it less error-prone.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=vx6U
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- Remove the skd driver. It's been EOL for a long time (Damien)
- NVMe pull requests
- fix multipath handling of ->queue_rq errors (Chao Leng)
- nvmet cleanups (Chaitanya Kulkarni)
- add a quirk for buggy Amazon controller (Filippo Sironi)
- avoid devm allocations in nvme-hwmon that don't interact well
with fabrics (Hannes Reinecke)
- sysfs cleanups (Jiapeng Chong)
- fix nr_zones for multipath (Keith Busch)
- nvme-tcp crash fix for no-data commands (Sagi Grimberg)
- nvmet-tcp fixes (Sagi Grimberg)
- add a missing __rcu annotation (Christoph)
- failed reconnect fixes (Chao Leng)
- various tracing improvements (Michal Krakowiak, Johannes
Thumshirn)
- switch the nvmet-fc assoc_list to use RCU protection (Leonid
Ravich)
- resync the status codes with the latest spec (Max Gurtovoy)
- minor nvme-tcp improvements (Sagi Grimberg)
- various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
Kulkarni, Israel Rukshin)
- Floppy O_NDELAY fix (Denis)
- MD pull request
- raid5 chunk_sectors fix (Guoqing)
- Use lore links (Kees)
- Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)
- loop lock scaling (Pavel)
- mtip32xx PCI fixes (Bjorn)
- bcache fixes (Kai, Dongdong)
- Misc fixes (Tian, Yang, Guoqing, Joe, Andy)
* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
lightnvm: fix unnecessary NULL check warnings
nvme-tcp: fix crash triggered with a dataless request submission
block: Replace lkml.org links with lore
nbd: Convert to DEFINE_SHOW_ATTRIBUTE
nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
nvme-hwmon: rework to avoid devm allocation
nvmet: remove else at the end of the function
nvmet: add nvmet_req_subsys() helper
nvmet: use min of device_path and disk len
nvmet: use invalid cmd opcode helper
nvmet: use invalid cmd opcode helper
nvmet: add helper to report invalid opcode
nvmet: remove extra variable in id-ns handler
nvmet: make nvmet_find_namespace() req based
nvmet: return uniform error for invalid ns
nvmet: set status to 0 in case for invalid nsid
nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
nvme-multipath: set nr_zones for zoned namespaces
nvmet-tcp: fix potential race of tcp socket closing accept_work
...
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
The original design to use device-managed resource allocation
doesn't really work as the NVMe controller has a vastly different
lifetime than the hwmon sysfs attributes, causing warning about
duplicate sysfs entries upon reconnection.
This patch reworks the hwmon allocation to avoid device-managed
resource allocation, and uses the NVMe controller as parent for
the sysfs attributes.
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Enzo Matsumiya <ematsumiya@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When using nvme native multipathing, if a path related error occurs
during ->queue_rq, the request needs to be completed with
NVME_SC_HOST_PATH_ERROR so that the request can be failed over.
Introduce a helper to complete the command from ->queue_rq in a wait
that invokes nvme_complete_rq.
Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: renamed, added a return value to clean up the callers a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fix the following coccicheck warning:
./drivers/nvme/host/core.c:3580:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3570:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3560:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3526:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:2833:8-16: WARNING: use scnprintf or sprintf.
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For a zoned namespace, in nvme_update_ns_info(), call
nvme_update_zone_info() after executing nvme_update_disk_info() so that
the namespace queue logical and physical block size limits are set.
This allows setting the namespace queue max_zone_append_sectors limit
in nvme_update_zone_info() instead of nvme_revalidate_zones(),
simplifying this function. Also use blk_queue_set_zoned() to set the
namespace zoned model.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add nvme_cancel_tagset and nvme_cancel_admin_tagset for tear down and
reconnection error handling.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the extra space in the nvme_free_cels() when calling
xa_for_each loop which is not a common practice
(except drivers/infiniband/core/ not sure why).
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just for current code in nvme_cleanup_cmd(), we don't have to get
namespace instance, but we need controller instance.
Controller instance can be retrieved by namespace instance, but it can
be directly accessed by nvme_request instance from request.
ctrl = nvme_req(req)->ctrl;
We don't have to go around namespace instance from request instance
through gendisk.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The controller can request a delay retrying a failed command by setting
the Command Retry Delay (CRD) field in the Completion Queue Entry.
Currentlty this features is only applied to commands on the I/O queue, but
not to commands on the admin queue. Retreive the nvme_ctrl from the
request so that no namespace is required and apply the feature to all
commands.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The only usage of these is to put their addresses in arrays of pointers
to const attribute_groups. Make them const to allow the compiler to put
them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The "list" of nvme_ns_head is used as rcu list, now in nvme_init_ns_head
list_add_tail is used to add ns->siblings to the rcu list. It is not safe.
Should use list_add_tail_rcu instead of list_add_tail.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Always use the bio_set_dev helper to assign ->bi_bdev to make sure
other state related to the device is uptodate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unconditionally call set_disk_ro now that it only updates the hardware
state. This allows to properly set up the Linux devices read-only when
the controller turns a previously writable namespace read-only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and
the metadata size play a vital role in deteriming the host buffer size.
If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer,
instead the controller adds it.
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Discovery controllers usually don't support smart log page command.
So when we connect to the discovery controller we see this warning:
nvme nvme0: Failed to read smart log (error 24577)
nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009
nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Introduce a new helper to understand if the controller is a discovery
controller and use this helper to skip nvme_init_hwmon (also use it in
other places that we check if the controller is a discovery controller).
Fixes: 400b6a7b13 ("nvme: Add hardware monitoring support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The only used argument in this function is the "req".
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There are no callers for nvme_reset_ctrl_sync() and
nvme_alloc_request_qid() so that we keep the symbols exported.
Unexport those functions, mark them static and update the header file
respectively.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
-----BEGIN PGP SIGNATURE-----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=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.
This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remane block device operations in preparation to add char device file
operations.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rename controller base dev_t char device in preparation for adding a
namespace char device.
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cleanup unnecessary ret values that are not checked or used in
nvme_alloc_ns().
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
During the scan_work, an Identify command is issued to figure out which
namespaces are active. If this command fails, the nvme driver falls back
to scanning namespaces sequentially. In this situation, we don't see
any warnings and don't even know whether list-ns command has been failed
or not easiliy.
Printa warning when the Identify command executin fail:
[ 1.108399] nvme nvme0: Identify NS List failed (status=0x400b)
[ 1.109583] nvme0n1: detected capacity change from 0 to 1048576
[ 1.112186] nvme nvme0: Identify Descriptors failed (nsid=2, status=0x4002)
[ 1.113929] nvme nvme0: Identify Descriptors failed (nsid=3, status=0x4002)
[ 1.116537] nvme nvme0: Identify Descriptors failed (nsid=4, status=0x4002)
...
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add the namespace ID to the error message when the Identify command used
to retrieve the Namespace Identification Descriptor list fails.
This avoids rather useless and duplicative messages like the following:
[ 1.321031] nvme nvme0: Identify Descriptors failed (16386)
[ 1.321948] nvme nvme0: Identify Descriptors failed (16386)
[ 1.322872] nvme nvme0: Identify Descriptors failed (16386)
[ 1.323775] nvme nvme0: Identify Descriptors failed (16386)
[ 1.324687] nvme nvme0: Identify Descriptors failed (16386)
...
Also, print the nvme status code in hexadecimal rather than decimal
format rather for better readability.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands get stuck while Host NVMe-oF controller is in reconnect state.
The controller enters into reconnect state when it loses connection with
the target. It tries to reconnect every 10 seconds (default) until
a successful reconnect or until the reconnect time-out is reached.
The default reconnect time out is 10 minutes.
Applications are expecting commands to complete with success or error
within a certain timeout (30 seconds by default). The NVMe host is
enforcing that timeout while it is connected, but during reconnect the
timeout is not enforced and commands may get stuck for a long period or
even forever.
To fix this long delay due to the default timeout, introduce new
"fast_io_fail_tmo" session parameter. The timeout is measured in seconds
from the controller reconnect and any command beyond that timeout is
rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).
Signed-off-by: Victor Gladkov <victor.gladkov@kioxia.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Right now nvme_alloc_request() allocates a request from block layer
based on the value of the qid. When qid set to NVME_QID_ANY it used
blk_mq_alloc_request() else blk_mq_alloc_request_hctx().
The function nvme_alloc_request() is called from different context, The
only place where it uses non NVME_QID_ANY value is for fabrics connect
commands :-
nvme_submit_sync_cmd() NVME_QID_ANY
nvme_features() NVME_QID_ANY
nvme_sec_submit() NVME_QID_ANY
nvmf_reg_read32() NVME_QID_ANY
nvmf_reg_read64() NVME_QID_ANY
nvmf_reg_write32() NVME_QID_ANY
nvmf_connect_admin_queue() NVME_QID_ANY
nvme_submit_user_cmd() NVME_QID_ANY
nvme_alloc_request()
nvme_keep_alive() NVME_QID_ANY
nvme_alloc_request()
nvme_timeout() NVME_QID_ANY
nvme_alloc_request()
nvme_delete_queue() NVME_QID_ANY
nvme_alloc_request()
nvmet_passthru_execute_cmd() NVME_QID_ANY
nvme_alloc_request()
nvmf_connect_io_queue() QID
__nvme_submit_sync_cmd()
nvme_alloc_request()
With passthru nvme_alloc_request() now falls into the I/O fast path such
that blk_mq_alloc_request_hctx() is never gets called and that adds
additional branch check in fast path.
Split the nvme_alloc_request() into nvme_alloc_request() and
nvme_alloc_request_qid().
Replace each call of the nvme_alloc_request() with NVME_QID_ANY param
with a call to newly added nvme_alloc_request() without NVME_QID_ANY.
Replace a call to nvme_alloc_request() with QID param with a call to
newly added nvme_alloc_request() and nvme_alloc_request_qid()
based on the qid value set in the __nvme_submit_sync_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is purely a clenaup patch, add prefix NVME to the ADMIN_TIMEOUT to
make consistent with NVME_IO_TIMEOUT.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function nvme_alloc_request() is called from different context
(I/O and Admin queue) where callers do not consider the I/O timeout when
called from I/O queue context.
Update nvme_alloc_request() to set the default I/O and Admin timeout
value based on whether the queuedata is set or not.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use the block layer helper to update both the disk and block device
sizes. Contrary to the name no notification is sent in this case,
as a size 0 is special cased.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The update_bdev argument is always set to true, so remove it. Also
rename the function to the slighly less verbose set_capacity_and_notify,
as propagating the disk size to the block device isn't really
revalidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to call revalidate_disk_size separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
xa_destroy() frees only internal data. The caller is responsible for
freeing the exteranl objects referenced by an xarray.
Fixes: 1cf7a12e09 ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the struct used for tracking known command effects logs in a
list. This is now saved in an xarray that doesn't use these elements.
Instead, store the log directly instead of the wrapper struct.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The offending commit breaks BLKROSET ioctl because a device
revalidation will blindly override BLKROSET setting. Hence,
we remove the disk rw setting in case NVME_NS_ATTR_RO is cleared
from by the controller.
Fixes: 1293477f4f ("nvme: set gendisk read only based on nsattr")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Introduce sync io queues for some scenarios which just only need sync
io queues not sync all queues.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Revalidating nvme zoned namespaces requires IO commands, and there are
controller states that prevent IO. For example, a sanitize in progress
is required to fail all IO, but we don't want to remove a namespace
we've previously added just because the controller is in such a state.
Suppress the error in this case.
Reported-by: Michael Nguyen <michael.nguyen@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Translate zoned resource errors to the appropriate blk_status_t.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=xE9E
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
-----BEGIN PGP SIGNATURE-----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=THH6
-----END PGP SIGNATURE-----
Merge tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- NVMe controller error path reference fix (Chaitanya)
- Fix regression with IBM partitions on non-dasd devices (Christoph)
- Fix a missing clear in the compat CDROM packet structure (Peilin)"
* tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block:
partitions/ibm: fix non-DASD devices
nvme-core: put ctrl ref when module ref get fail
block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()
In nvme_set_queue_limits() we initialize vwc to false and later add
a condition to set vwc true. The value of the vwc can be declare
initialized which makes all the blk_queue_XXX() calls uniform.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_validate_ns() the exra variable ctrl is used only twice.
Using ns->ctrl directly still maintains the redability and original
length of the lines in the code. Get rid of the extra variable ctrl &
use ns->ctrl directly.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just fold it into the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Move the logic to revalidate the block_device size or remove the
namespace from the caller into nvme_validate_ns. This removes
the return value and thus the status code translation. Additionally
it also catches non-permanent errors from nvme_update_ns_info using
the existing logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Move nvme_validate_ns just above its only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Check the namespace identifier list first thing when scanning namespaces.
This keeps the code to query the CSI common between the alloc and validate
path, and helps to structure the code better for multiple command set
support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Now that the queue is frozen before updating ->lba_shift we can't hit the
invalid references mentioned in the comment any more. More importantly
this code would not have helped us if the format was changed by another
controller or through implementation defined back channels.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
A Format NVM command can change the capabilities of namespaces, while
Sanitize does change the Logical Block Content and must be serialized.
Also remove CSUPP bit for Format - it is not a mandatory command,
and we don't check for the bit anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Only set the queue limits once we have the real block size. This also
updates the limits on a rescan if needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
We can no longer reach this code if Identify Namespace failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Use a single statement to set both the capacity and fake block size
instead of two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Ensure that there can't be any I/O in flight went we change the disk
geometry in nvme_update_ns_info, most notable the LBA size by lifting
the queue free from nvme_update_disk_info into the caller
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Factor out a helper from nvme_update_ns_info that configures the
per-namespaces metadata and PI settings. Also make sure the helpers
clear the flags explicitly instead of all of ->features to allow for
potentially reusing ->features for future non-metadata flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Check if the namespace actually exists as the very first thing and don't
bother with any extra work if not. This should speed up and simplify
the sequential scanning for NVMe 1.0 devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Move the check from the two callers into the common helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Rename __nvme_revalidate_disk to nvme_update_ns_info and pass a
namespace instead of the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Rename _nvme_revalidate_disk to nvme_validate_ns to better describe
what the function does, and pass the struct nvme_ns instead of the
gendisk to better match the call chain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Use a slightly more descriptive name to enable reusing nvme_validate_ns
in the next patch for a lower level function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
The queue can trivially be derived from the nvme_ns structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
The removal of the ->revalidate_disk method broke the initialization of
the zone bitmaps, as nvme_revalidate_disk now never gets called during
initialization.
Move the zone related code from nvme_revalidate_disk into a new helper in
zns.c, and call it from nvme_alloc_ns in addition to nvme_validate_ns to
ensure the zone bitmaps are initialized during probe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
When try_module_get() fails in the nvme_dev_open() it returns without
releasing the ctrl reference which was taken earlier.
Put the ctrl reference which is taken before calling the
try_module_get() in the error return code path.
Fixes: 52a3974feb "nvme-core: get/put ctrl and transport module in nvme_dev_open/release()"
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When using linked list we have to open code the locking, search, and
destroy operations with the loops even if data structure doesn't fall
into the fast path.
One of the main advantage of having XArray to store, search, and remove
items is that it handles all the locking by itself, avoids the loops
when using linked lists, provides clear API to replace the linked list's
search and destroy loops.
This patch replaces the ctrl->cel list with XArray and removes :-
a. Extra code needed for the linked list for ctrl->cel item management
such as nvme_find_cel().
b. Destroy loop in the nvme_free_ctrl().
c. Explicit insertion locking in the nvme_get_effects_log().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Lift opening the file open/close code from nvme_ctrl_get_by_path into
the caller, just keeping a simple nvme_ctrl_from_file() helper.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: refactored a bit, split the bug fixes into a separate prep patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
-----BEGIN PGP SIGNATURE-----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=e8oA
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"NVMe pull request from Christoph, and removal of a dead define.
- fix error during controller probe that cause double free irqs
(Keith Busch)
- FC connection establishment fix (James Smart)
- properly handle completions for invalid tags (Xianting Tian)
- pass the correct nsid to the command effects and supported log
(Chaitanya Kulkarni)"
* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
block: remove unused BLK_QC_T_EAGAIN flag
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
nvme-fc: fail new connections to a deleted host or remote port
nvme-pci: fix NULL req in completion handler
nvme: return errors for hwmon init
* for-5.10/block: (140 commits)
bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag
bdi: invert BDI_CAP_NO_ACCT_WB
bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
mm: use SWP_SYNCHRONOUS_IO more intelligently
bdi: remove BDI_CAP_SYNCHRONOUS_IO
bdi: remove BDI_CAP_CGROUP_WRITEBACK
block: lift setting the readahead size into the block layer
md: update the optimal I/O size on reshape
bdi: initialize ->ra_pages and ->io_pages in bdi_init
aoe: set an optimal I/O size
bcache: inherit the optimal I/O size
drbd: remove dead code in device_to_statistics
fs: remove the unused SB_I_MULTIROOT flag
block: mark blkdev_get static
PM: mm: cleanup swsusp_swap_check
mm: split swap_type_of
PM: rewrite is_hibernate_resume_dev to not require an inode
mm: cleanup claim_swapfile
ocfs2: cleanup o2hb_region_dev_store
dasd: cleanup dasd_scan_partitions
...
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it. This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.
One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore. It is replaced with a queue attribute which
also is writable for easier testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers shouldn't really mess with the readahead size, as that is a VM
concept. Instead set it based on the optimal I/O size by lifting the
algorithm from the md driver when registering the disk. Also set
bdi->io_pages there as well by applying the same scheme based on
max_sectors. To ensure the limits work well for stacking drivers a
new helper is added to update the readahead limits from the block
limits, which is also called from disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the function nvme_get_effects_log() it uses NVME_NSID_ALL which has
namespace scope. The command effect log page is controller specific.
Replace NVME_NSID_ALL with 0x00 which specifies the controller scope
instead of namespace scope.
Fixes: 84fef62d13 ("nvme: check admin passthru command effects")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209287
Reported-by: Huai-Cheng Kuo <hh81478072@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=zT03
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few NVMe fixes, and a dasd write zero fix"
* tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
nvmet: get transport reference for passthru ctrl
nvme-core: get/put ctrl and transport module in nvme_dev_open/release()
nvme-tcp: fix kconfig dependency warning when !CRYPTO
nvme-pci: disable the write zeros command for Intel 600P/P3100
s390/dasd: Fix zero write for FBA devices
Initializing the nvme hwmon retrieves a log from the controller. If the
controller is broken, we need to return the appropriate error so that
subsequent initialization doesn't attempt to continue.
Reported-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
-----BEGIN PGP SIGNATURE-----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=J16G
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix a regression in bdev partition locking (Christoph)
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
block: Set same_page to false in __bio_try_merge_page if ret is false
nvme-fabrics: allow to queue requests for live queues
block: only call sched requeue_request() for scheduled requests
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
block: restore a specific error code in bdev_del_partition
The indicated patch introduced a barrier in the sysfs_delete attribute
for the controller that rejects the request if the controller isn't
created. "Created" is defined as at least 1 call to nvme_start_ctrl().
This is problematic in error-injection testing. If an error occurs on
the initial attempt to create an association and the controller enters
reconnect(s) attempts, the admin cannot delete the controller until
either there is a successful association created or ctrl_loss_tmo
times out.
Where this issue is particularly hurtful is when the "admin" is the
nvme-cli, it is performing a connection to a discovery controller, and
it is initiated via auto-connect scripts. With the FC transport, if the
first connection attempt fails, the controller enters a normal reconnect
state but returns control to the cli thread that created the controller.
In this scenario, the cli attempts to read the discovery log via ioctl,
which fails, causing the cli to see it as an empty log and then proceeds
to delete the discovery controller. The delete is rejected and the
controller is left live. If the discovery controller reconnect then
succeeds, there is no action to delete it, and it sits live doing nothing.
Cc: <stable@vger.kernel.org> # v5.7+
Fixes: ce1518139e ("nvme: Fix controller creation races with teardown flow")
Signed-off-by: James Smart <james.smart@broadcom.com>
CC: Israel Rukshin <israelr@mellanox.com>
CC: Max Gurtovoy <maxg@mellanox.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Keith Busch <kbusch@kernel.org>
CC: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=8fvz
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
Keep control in the NVMe driver instead of going through an indirect
call back into ->revalidate_disk. Also reorder the function a bit to be
easier to follow with the additional code.
And now that we have removed all callers of revalidate_disk() in the nvme
code, ->revalidate_disk is only called from the open code when first
opening the device. Which is of course totally pointless as we have
a valid size since the initial scan, and will get an updated view
through the asynchronous notifiation everytime the size changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In nvme_set_queue_dying we really just want to ensure the disk and bdev
sizes are set to zero. Going through revalidate_disk leads to a somewhat
arcance and complex callchain relying on special behavior in a few
places. Instead just lift the set_capacity directly to
nvme_set_queue_dying, and rename and move the nvme_mpath_update_disk_size
helper so that we can use it in nvme_set_queue_dying to propagate the
size to the bdev without detours.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block-5.9:
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
The kernel requires a power of two for boundaries because that's the
only way it can efficiently split commands that cross them. A
controller, however, may report a non-power of two boundary.
The driver had been rounding the controller's value to one the kernel
can use, but splitting on the wrong boundary provides no benefit on the
device side, and incurs additional submission overhead from non-optimal
splits.
Don't provide any boundary hint if the controller's value can't be used
and log a warning when first scanning a disk's unreported IO boundary.
Since the chunk sector logic has grown, move it to a separate function.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
If the driver has to unbind from the controller for an early failure
before the subsystem has been set up, there won't be a subsystem holding
the controller's instance, so the controller needs to free its own
instance in this case.
Fixes: 733e4b69d5 ("nvme: Assign subsys instance from first ctrl")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
PCIe controllers do not have fabric opts, verify they exist before
showing ctrl_loss_tmo or reconnect_delay attributes.
Fixes: 764075fdcb ("nvme: expose reconnect_delay and ctrl_loss_tmo via sysfs")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Users can detect if the wait has completed or not and take appropriate
actions based on this information (e.g. weather to continue
initialization or rather fail and schedule another initialization
attempt).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
-----BEGIN PGP SIGNATURE-----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=fAwK
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Sagi:
- nvme completion rework from Christoph and Chao that mostly came
from a bit of divergence of how we classify errors related to
pathing/retry etc.
- nvmet passthru fixes from Chaitanya
- minor nvmet fixes from Amit and I
- mpath round-robin path selection fix from Martin
- ignore noiob for zoned devices from Keith
- minor nvme-fc fix from Tianjia"
- BFQ cgroup leak fix (Dmitry)
- block layer MAINTAINERS addition (Geert)
- fix null_blk FUA checking (Hou)
- get_max_io_size() size fix (Keith)
- fix block page_is_mergeable() for compound pages (Matthew)
- discard granularity fixes (Ming)
- IO scheduler ordering fix (Ming)
- misc fixes
* tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block: (31 commits)
null_blk: fix passing of REQ_FUA flag in null_handle_rq
nvmet: Disable keep-alive timer when kato is cleared to 0h
nvme: redirect commands on dying queue
nvme: just check the status code type in nvme_is_path_error
nvme: refactor command completion
nvme: rename and document nvme_end_request
nvme: skip noiob for zoned devices
nvme-pci: fix PRP pool size
nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth
nvme: Use spin_lock_irq() when taking the ctrl->lock
nvmet: call blk_mq_free_request() directly
nvmet: fix oops in pt cmd execution
nvmet: add ns tear down label for pt-cmd handling
nvme: multipath: round-robin: eliminate "fallback" variable
nvme: multipath: round-robin: fix single non-optimized path case
nvme-fc: Fix wrong return value in __nvme_fc_init_request()
nvmet-passthru: Reject commands with non-sgl flags set
nvmet: fix a memory leak
blkcg: fix memleak for iolatency
MAINTAINERS: Add missing header files to BLOCK LAYER section
...
If a command send through nvme-multipath failed on a dying queue, resend it
on another path.
Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: rebased on top of the completion refactoring]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lift all the code to decide the dispostition of a completed command
from nvme_complete_rq and nvme_failover_req into a new helper, which
returns an emum of the potential actions. nvme_complete_rq then
just switches on those and calls the proper helper for the action.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zoned block devices reuse the chunk_sectors queue limit to define zone
boundaries. If a such a device happens to also report an optimal
boundary, do not use that to define the chunk_sectors as that may
intermittently interfere with io splitting and zone size queries.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When locking the ctrl->lock spinlock IRQs need to be disabled to avoid a
dead lock. The new spin_lock() calls recently added produce the
following lockdep warning when running the blktest nvme/003:
================================
WARNING: inconsistent lock state
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/2/22 [HC0[0]:SC1[1]:HE0:SE0] takes:
ffff888276a8c4c0 (&ctrl->lock){+.?.}-{2:2}, at: nvme_keep_alive_end_io+0x50/0xc0
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x164/0x500
_raw_spin_lock+0x28/0x40
nvme_get_effects_log+0x37/0x1c0
nvme_init_identify+0x9e4/0x14f0
nvme_reset_work+0xadd/0x2360
process_one_work+0x66b/0xb70
worker_thread+0x6e/0x6c0
kthread+0x1e7/0x210
ret_from_fork+0x22/0x30
irq event stamp: 1449221
hardirqs last enabled at (1449220): [<ffffffff81c58e69>] ktime_get+0xf9/0x140
hardirqs last disabled at (1449221): [<ffffffff83129665>] _raw_spin_lock_irqsave+0x25/0x60
softirqs last enabled at (1449210): [<ffffffff83400447>] __do_softirq+0x447/0x595
softirqs last disabled at (1449215): [<ffffffff81b489b5>] run_ksoftirqd+0x35/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ctrl->lock);
<Interrupt>
lock(&ctrl->lock);
*** DEADLOCK ***
no locks held by ksoftirqd/2/22.
stack backtrace:
CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 5.8.0-rc4-eid-vmlocalyes-dbg-00157-g7236657c6b3a #1450
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014
Call Trace:
dump_stack+0xc8/0x11a
print_usage_bug.cold.63+0x235/0x23e
mark_lock+0xa9c/0xcf0
__lock_acquire+0xd9a/0x2b50
lock_acquire+0x164/0x500
_raw_spin_lock_irqsave+0x40/0x60
nvme_keep_alive_end_io+0x50/0xc0
blk_mq_end_request+0x158/0x210
nvme_complete_rq+0x146/0x500
nvme_loop_complete_rq+0x26/0x30 [nvme_loop]
blk_done_softirq+0x187/0x1e0
__do_softirq+0x118/0x595
run_ksoftirqd+0x35/0x50
smpboot_thread_fn+0x1d3/0x310
kthread+0x1e7/0x210
ret_from_fork+0x22/0x30
Fixes: be93e87e78 ("nvme: support for multiple Command Sets Supported and Effects log pages")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=uMth
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block
Pull block stacking updates from Jens Axboe:
"The stacking related fixes depended on both the core block and drivers
branches, so here's a topic branch with that change.
Outside of that, a late fix from Johannes for zone revalidation"
* tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block:
block: don't do revalidate zones on invalid devices
block: remove blk_queue_stack_limits
block: remove bdev_stack_limits
block: inherit the zoned characteristics in blk_stack_limits
-----BEGIN PGP SIGNATURE-----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=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
Chaitanya Kulkarni
Christoph Hellwig
Martin Belanger
Alexey Bogoslavsky
Guoqing Jiang
Tao Chiu
Kanchan Joshi
Minwoo Im
Linus Torvalds
Hannes Reinecke
Gopal Tiwari
Niklas Cassel
Sami Tolvanen
Bart Van Assche
Keith Busch
Daniel Wagner
Chao Leng
Jiapeng Chong
Damien Le Moal
Rikard Falkeborn
Guoqing Jiang
Revanth Rajashekar
Sagi Grimberg
Max Gurtovoy
Javier González
Victor Gladkov
Jens Axboe
James Smart
Gustavo A. R. Silva
Logan Gunthorpe