dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary pieces
have already gone into mainline. This chunk is finally getting to the
meat of that stuff - infrastructure and most of the conversions to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaTEq1wAKCRBZ7Krx/gZQ
643uAQC1rRslhw5l7OjxEpIYbGG4M+QaadN4Nf5Sr2SuTRaPJQD/W4oj/u4C2eCw
Dd3q071tqyvm/PXNgN2EEnIaxlFUlwc=
=rKq+
-----END PGP SIGNATURE-----
Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
There is only a single commit,
Clarify the rootid_owns_currentns
which introduces no functional change. Ryan Foster had sent a patch
to add testing of the security/commoncap.c:rootid_owns_currentns()
function. The patch pointed out that this function was not as clear
as it should be.
This commit has two purposes:
1. Clarify the intent of the function in the name
2. Split the function so that the base functionality is easier
to test from a kunit test.
This commit has been in linux-next since November 18 with no reported
issues. Ryan has posted an updated test patch based on this commit.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEqb0/8XByttt4D8+UNXDaFycKziQFAmkyJQsACgkQNXDaFycK
ziTuVAgAuNKlx3SH2G9JAk75pyg3LB5DOHZo9SUXeyPJ0E5Mr2zsYEBDfrL0Ai7N
ERIMdGHu07xeVeO/zRCpHqV0ghiKX8PNKk41Ck0+SIBDw4CQ/OVEql2WJB229YRI
0MljanjV9Zi3WPREpXQd7Hj0cYKIff+ZgzQ/CBKN4co5HH9VXkggnm13zXoejQiR
GZOsV/uVkLeXy9wXBsnySZ4p5PkCiqsDn8dp7RgNSHLDoh4s+Aj0zvxlCyeNr2IY
tKS8iXsxMWgZyVsP6VOZkSRvXRTzgL8My+zCnCV10j8aHvw/LKrKW+iGePHDu6Pa
CTw2S4I+AhIy0KtYKZSqqvllnX/low==
=MaY2
-----END PGP SIGNATURE-----
Merge tag 'caps-pr-20251204' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities update from Serge Hallyn:
"Ryan Foster had sent a patch to add testing of the
rootid_owns_currentns() function. That patch pointed out
that this function was not as clear as it should be. Fix it:
- Clarify the intent of the function in the name
- Split the function so that the base functionality is easier to test
from a kunit test"
* tag 'caps-pr-20251204' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
Clarify the rootid_owns_currentns
Use tpm_ret_to_err() to transmute TPM return codes in trusted_tpm2.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
API:
- Rewrite memcpy_sglist from scratch.
- Add on-stack AEAD request allocation.
- Fix partial block processing in ahash.
Algorithms:
- Remove ansi_cprng.
- Remove tcrypt tests for poly1305.
- Fix EINPROGRESS processing in authenc.
- Fix double-free in zstd.
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng.
- Add support for PCI device 0x115A to ccp.
- Add support of paes in caam.
- Add support for aes-xts in dthev2.
Others:
- Use likely in rhashtable lookup.
- Fix lockdep false-positive in padata by removing a helper.
-----BEGIN PGP SIGNATURE-----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=DHes
-----END PGP SIGNATURE-----
Merge tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCaS+zQhEcd3VmYW5Aa2Vy
bmVsLm9yZwAKCRDyomI6a/yO7TfdAP4ngYyNKMwefqmrwG7akL9sRCWEH4Y/ZM/Z
ZwFw0waDkAEA5gV5LH6DJme9rBsXjC8wkOiiUOerqopIVKPMeYKCmAc=
=sOI5
-----END PGP SIGNATURE-----
Merge tag 'ipe-pr-20251202' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull IPE udates from Fan Wu:
"The primary change is the addition of support for the AT_EXECVE_CHECK
flag. This allows interpreters to signal the kernel to perform IPE
security checks on script files before execution, extending IPE
enforcement to indirectly executed scripts.
Update documentation for it, and also fix a comment"
* tag 'ipe-pr-20251202' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: Update documentation for script enforcement
ipe: Add AT_EXECVE_CHECK support for script enforcement
ipe: Drop a duplicated CONFIG_ prefix in the ifdeffery
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaS896BQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5RDuAQDx4fmvctP8kc9PeRjd5X/UV1ip1pPD
beMKt8ghEThQiAEAzjFJbNGUDKhfR8yWODifAvYRurU5YQJZZI9wJ8skNw0=
=3Vc4
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Bug fixes:
- defer credentials checking from the bprm_check_security hook to the
bprm_creds_from_file security hook
- properly ignore IMA policy rules based on undefined SELinux labels
IMA policy rule extensions:
- extend IMA to limit including file hashes in the audit logs
(dont_audit action)
- define a new filesystem subtype policy option (fs_subtype)
Misc:
- extend IMA to support in-kernel module decompression by deferring
the IMA signature verification in kernel_read_file() to after the
kernel module is decompressed"
* tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Handle error code returned by ima_filter_rule_match()
ima: Access decompressed kernel module to verify appended signature
ima: add fs_subtype condition for distinguishing FUSE instances
ima: add dont_audit action to suppress audit actions
ima: Attach CREDS_CHECK IMA hook to bprm_creds_from_file LSM hook
-----BEGIN PGP SIGNATURE-----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=IvVa
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Improve the granularity of SELinux labeling for memfd files
Currently when creating a memfd file, SELinux treats it the same as
any other tmpfs, or hugetlbfs, file. While simple, the drawback is
that it is not possible to differentiate between memfd and tmpfs
files.
This adds a call to the security_inode_init_security_anon() LSM hook
and wires up SELinux to provide a set of memfd specific access
controls, including the ability to control the execution of memfds.
As usual, the commit message has more information.
- Improve the SELinux AVC lookup performance
Adopt MurmurHash3 for the SELinux AVC hash function instead of the
custom hash function currently used. MurmurHash3 is already used for
the SELinux access vector table so the impact to the code is minimal,
and performance tests have shown improvements in both hash
distribution and latency.
See the commit message for the performance measurments.
- Introduce a Kconfig option for the SELinux AVC bucket/slot size
While we have the ability to grow the number of AVC hash buckets
today, the size of the buckets (slot size) is fixed at 512. This pull
request makes that slot size configurable at build time through a new
Kconfig knob, CONFIG_SECURITY_SELINUX_AVC_HASH_BITS.
* tag 'selinux-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: improve bucket distribution uniformity of avc_hash()
selinux: Move avtab_hash() to a shared location for future reuse
selinux: Introduce a new config to make avc cache slot size adjustable
memfd,selinux: call security_inode_init_security_anon()
-----BEGIN PGP SIGNATURE-----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=u7yQ
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
- Rework the LSM initialization code
What started as a "quick" patch to enable a notification event once
all of the individual LSMs were initialized, snowballed a bit into a
30+ patch patchset when everything was done. Most of the patches, and
diffstat, is due to splitting out the initialization code into
security/lsm_init.c and cleaning up some of the mess that was there.
While not strictly necessary, it does cleanup the code signficantly,
and hopefully makes the upkeep a bit easier in the future.
Aside from the new LSM_STARTED_ALL notification, these changes also
ensure that individual LSM initcalls are only called when the LSM is
enabled at boot time. There should be a minor reduction in boot times
for those who build multiple LSMs into their kernels, but only enable
a subset at boot.
It is worth mentioning that nothing at present makes use of the
LSM_STARTED_ALL notification, but there is work in progress which is
dependent upon LSM_STARTED_ALL.
- Make better use of the seq_put*() helpers in device_cgroup
* tag 'lsm-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (36 commits)
lsm: use unrcu_pointer() for current->cred in security_init()
device_cgroup: Refactor devcgroup_seq_show to use seq_put* helpers
lsm: add a LSM_STARTED_ALL notification event
lsm: consolidate all of the LSM framework initcalls
selinux: move initcalls to the LSM framework
ima,evm: move initcalls to the LSM framework
lockdown: move initcalls to the LSM framework
apparmor: move initcalls to the LSM framework
safesetid: move initcalls to the LSM framework
tomoyo: move initcalls to the LSM framework
smack: move initcalls to the LSM framework
ipe: move initcalls to the LSM framework
loadpin: move initcalls to the LSM framework
lsm: introduce an initcall mechanism into the LSM framework
lsm: group lsm_order_parse() with the other lsm_order_*() functions
lsm: output available LSMs when debugging
lsm: cleanup the debug and console output in lsm_init.c
lsm: add/tweak function header comment blocks in lsm_init.c
lsm: fold lsm_init_ordered() into security_init()
lsm: cleanup initialize_lsm() and rename to lsm_init_single()
...
This pull request includes couple of updates for trusted keys:
1. Remove duplicate 'tpm2_hash_map' and use the one in the drive via new
function 'tpm2_find_hash_alg'.
2. Fix a memory leak on failure paths of 'tpm2_load_cmd'.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaStg0gAKCRAaerohdGur
0gdUAQCit+7Vwpc2oArfJoCFI1ILhLArPSUlBI0ZUB+BpBNZbQD/T1TwdT3Ytekf
jwkKrJbavuFQ+u5pUb2WShQJ7WOcBg4=
=jor5
-----END PGP SIGNATURE-----
Merge tag 'keys-trusted-next-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull trusted key updates from Jarkko Sakkinen:
- Remove duplicate 'tpm2_hash_map' in favor of 'tpm2_find_hash_alg()'
- Fix a memory leak on failure paths of 'tpm2_load_cmd'
* tag 'keys-trusted-next-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Fix a memory leak in tpm2_load_cmd
KEYS: trusted: Replace a redundant instance of tpm2_hash_map
This first pull request for keys contains only three fixes.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaSjR9gAKCRAaerohdGur
0iQeAQCFL05gbNjgxpKXhnhPXwGq9F+h7hS7iwLP4MdvGO3DzAEAoFUZZ4I2jeOc
uw6SdwNEDqEJanNmXO6z5hHi93HlGAY=
=IwkO
-----END PGP SIGNATURE-----
Merge tag 'keys-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys update from Jarkko Sakkinen:
"This contains only three fixes"
* tag 'keys-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: Fix grammar and formatting in 'struct key_type' comments
keys: Replace deprecated strncpy in ecryptfs_fill_auth_tok
keys: Remove redundant less-than-zero checks
This patch adds a new ipe_bprm_creds_for_exec() hook that integrates
with the AT_EXECVE_CHECK mechanism. To enable script enforcement,
interpreters need to incorporate the AT_EXECVE_CHECK flag when
calling execveat() on script files before execution.
When a userspace interpreter calls execveat() with the AT_EXECVE_CHECK
flag, this hook triggers IPE policy evaluation on the script file. The
hook only triggers IPE when bprm->is_check is true, ensuring it's
being called from an AT_EXECVE_CHECK context. It then builds an
evaluation context for an IPE_OP_EXEC operation and invokes IPE policy.
The kernel returns the policy decision to the interpreter, which can
then decide whether to proceed with script execution.
This extends IPE enforcement to indirectly executed scripts, permitting
trusted scripts to execute while denying untrusted ones.
Signed-off-by: Yanzhu Huang <yanzhuhuang@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
Looks like it got added by mistake, perhaps editor auto-completion
artifact. Drop it.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Fan Wu <wufan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
op9tAQCJ//STOkvYHfqgsdRD+cW9MRg/gPzfVZgnV1FTyf8sMgEA0IsY5zCZB9eh
9FdD0E57P8PlWRwWZ+LktnWBzRAUqwI=
=MOVR
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory locking updates from Christian Brauner:
"This contains the work to add centralized APIs for directory locking
operations.
This series is part of a larger effort to change directory operation
locking to allow multiple concurrent operations in a directory. The
ultimate goal is to lock the target dentry(s) rather than the whole
parent directory.
To help with changing the locking protocol, this series centralizes
locking and lookup in new helper functions. The helpers establish a
pattern where it is the dentry that is being locked and unlocked
(currently the lock is held on dentry->d_parent->d_inode, but that can
change in the future).
This also changes vfs_mkdir() to unlock the parent on failure, as well
as dput()ing the dentry. This allows end_creating() to only require
the target dentry (which may be IS_ERR() after vfs_mkdir()), not the
parent"
* tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nfsd: fix end_creating() conversion
VFS: introduce end_creating_keep()
VFS: change vfs_mkdir() to unlock on failure.
ecryptfs: use new start_creating/start_removing APIs
Add start_renaming_two_dentries()
VFS/ovl/smb: introduce start_renaming_dentry()
VFS/nfsd/ovl: introduce start_renaming() and end_renaming()
VFS: add start_creating_killable() and start_removing_killable()
VFS: introduce start_removing_dentry()
smb/server: use end_removing_noperm for for target of smb2_create_link()
VFS: introduce start_creating_noperm() and start_removing_noperm()
VFS/nfsd/cachefiles/ovl: introduce start_removing() and end_removing()
VFS/nfsd/cachefiles/ovl: add start_creating() and end_creating()
VFS: tidy up do_unlinkat()
VFS: introduce start_dirop() and end_dirop()
debugfs: rename end_creating() to debugfs_end_creating()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZQAKCRCRxhvAZXjc
orJLAP9UD+dX6cicJDkzFZowDakmoIQkR5ZSDwChSlmvLcmquwEAlSq4svVd9Bdl
7kOFUk71DqhVHrPAwO7ap0BxehokEAA=
=Cli6
-----END PGP SIGNATURE-----
Merge tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull cred guard updates from Christian Brauner:
"This contains substantial credential infrastructure improvements
adding guard-based credential management that simplifies code and
eliminates manual reference counting in many subsystems.
Features:
- Kernel Credential Guards
Add with_kernel_creds() and scoped_with_kernel_creds() guards that
allow using the kernel credentials without allocating and copying
them. This was requested by Linus after seeing repeated
prepare_kernel_creds() calls that duplicate the kernel credentials
only to drop them again later.
The new guards completely avoid the allocation and never expose the
temporary variable to hold the kernel credentials anywhere in
callers.
- Generic Credential Guards
Add scoped_with_creds() guards for the common override_creds() and
revert_creds() pattern. This builds on earlier work that made
override_creds()/revert_creds() completely reference count free.
- Prepare Credential Guards
Add prepare credential guards for the more complex pattern of
preparing a new set of credentials and overriding the current
credentials with them:
- prepare_creds()
- modify new creds
- override_creds()
- revert_creds()
- put_cred()
Cleanups:
- Make init_cred static since it should not be directly accessed
- Add kernel_cred() helper to properly access the kernel credentials
- Fix scoped_class() macro that was introduced two cycles ago
- coredump: split out do_coredump() from vfs_coredump() for cleaner
credential handling
- coredump: move revert_cred() before coredump_cleanup()
- coredump: mark struct mm_struct as const
- coredump: pass struct linux_binfmt as const
- sev-dev: use guard for path"
* tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
trace: use override credential guard
trace: use prepare credential guard
coredump: use override credential guard
coredump: use prepare credential guard
coredump: split out do_coredump() from vfs_coredump()
coredump: mark struct mm_struct as const
coredump: pass struct linux_binfmt as const
coredump: move revert_cred() before coredump_cleanup()
sev-dev: use override credential guards
sev-dev: use prepare credential guard
sev-dev: use guard for path
cred: add prepare credential guard
net/dns_resolver: use credential guards in dns_query()
cgroup: use credential guards in cgroup_attach_permissions()
act: use credential guards in acct_write_process()
smb: use credential guards in cifs_get_spnego_key()
nfs: use credential guards in nfs_idmap_get_key()
nfs: use credential guards in nfs_local_call_write()
nfs: use credential guards in nfs_local_call_read()
erofs: use credential guards
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZAAKCRCRxhvAZXjc
omMSAP9GLhavxyWQ24Q+49CNWWRQWDY1wTOiUK2BwtIvZ0YEcAD8D1dAiMckL5pC
RwEAVA5p+y+qi+bZP0KXCBxQddoTIQM=
=zo/J
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
'tpm2_load_cmd' allocates a tempoary blob indirectly via 'tpm2_key_decode'
but it is not freed in the failure paths. Address this by wrapping the blob
into with a cleanup helper.
Cc: stable@vger.kernel.org # v5.13+
Fixes: f221974525 ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
'trusted_tpm2' duplicates 'tpm2_hash_map' originally part of the TPN
driver, which is suboptimal.
Implement and export `tpm2_find_hash_alg()` in the driver, and substitute
the redundant code in 'trusted_tpm2' with a call to the new function.
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
strncpy() is deprecated for NUL-terminated destination buffers; use
strscpy_pad() instead to retain the NUL-padding behavior of strncpy().
The destination buffer is initialized using kzalloc() with a 'signature'
size of ECRYPTFS_PASSWORD_SIG_SIZE + 1. strncpy() then copies up to
ECRYPTFS_PASSWORD_SIG_SIZE bytes from 'key_desc', NUL-padding any
remaining bytes if needed, but expects the last byte to be zero.
strscpy_pad() also copies the source string to 'signature', and NUL-pads
the destination buffer if needed, but ensures it's always NUL-terminated
without relying on it being zero-initialized.
strscpy_pad() automatically determines the size of the fixed-length
destination buffer via sizeof() when the optional size argument is
omitted, making an explicit size unnecessary.
In encrypted_init(), the source string 'key_desc' is validated by
valid_ecryptfs_desc() before calling ecryptfs_fill_auth_tok(), and is
therefore NUL-terminated and satisfies the __must_be_cstr() requirement
of strscpy_pad().
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The local variables 'size_t datalen' are unsigned and cannot be less
than zero. Remove the redundant conditions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-----BEGIN PGP SIGNATURE-----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=32VE
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20251121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux patches for v6.18 to fix issues around accessing the
per-task decision cache that we introduced in v6.16 to help reduce
SELinux overhead on path walks. The problem was that despite the cache
being located in the SELinux "task_security_struct", the parent struct
wasn't actually tied to the task, it was tied to a cred.
Historically SELinux did locate the task_security_struct in the
task_struct's security blob, but it was later relocated to the cred
struct when the cred work happened, as it made the most sense at the
time.
Unfortunately we never did the task_security_struct to
cred_security_struct rename work (avoid code churn maybe? who knows)
because it didn't really matter at the time. However, it suddenly
became a problem when we added a per-task cache to a per-cred object
and didn't notice because of the old, no-longer-correct struct naming.
Thanks to KCSAN for flagging this, as the silly humans running things
forgot that the task_security_struct was a big lie.
This contains three patches, only one of which actually fixes the
problem described above and moves the SELinux decision cache from the
per-cred struct to a newly (re)created per-task struct.
The other two patches, which form the bulk of the diffstat, take care
of the associated renaming tasks so we can hopefully avoid making the
same stupid mistake in the future.
For the record, I did contemplate sending just a fix for the cache,
leaving the renaming patches for the upcoming merge window, but the
type/variable naming ended up being pretty awful and would have made
v6.18 an outlier stuck between the "old" names and the "new" names in
v6.19. The renaming patches are also fairly mechanical/trivial and
shouldn't pose much risk despite their size.
TLDR; naming things may be hard, but if you mess it up bad things
happen"
* tag 'selinux-pr-20251121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: rename the cred_security_struct variables to "crsec"
selinux: move avdcache to per-task security struct
selinux: rename task_security_struct to cred_security_struct
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match.
Fixes: 4af4662fa4 ("integrity: IMA policy")
Signed-off-by: Zhao Yipeng <zhaoyipeng5@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Along with the renaming from task_security_struct to cred_security_struct,
rename the local variables to "crsec" from "tsec". This both fits with
existing conventions and helps distinguish between task and cred related
variables.
No functional changes.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The avdcache is meant to be per-task; move it to a new
task_security_struct that is duplicated per-task.
Cc: stable@vger.kernel.org
Fixes: 5d7ddc59b3 ("selinux: reduce path walk overhead")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line length fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Before Linux had cred structures, the SELinux task_security_struct was
per-task and although the structure was switched to being per-cred
long ago, the name was never updated. This change renames it to
cred_security_struct to avoid confusion and pave the way for the
introduction of an actual per-task security structure for SELinux. No
functional change.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
We need to directly allocate the cred's LSM state for the initial task
when we initialize the LSM framework. Unfortunately, this results in a
RCU related type mismatch, use the unrcu_pointer() macro to handle this
a bit more elegantly.
The explicit type casting still remains as we need to work around the
constification of current->cred in this particular case.
Reviewed-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, when in-kernel module decompression (CONFIG_MODULE_DECOMPRESS)
is enabled, IMA has no way to verify the appended module signature as it
can't decompress the module.
Define a new kernel_read_file_id enumerate READING_MODULE_COMPRESSED so
IMA can calculate the compressed kernel module data hash on
READING_MODULE_COMPRESSED and defer appraising/measuring it until on
READING_MODULE when the module has been decompressed.
Before enabling in-kernel module decompression, a kernel module in
initramfs can still be loaded with ima_policy=secure_boot. So adjust the
kernel module rule in secure_boot policy to allow either an IMA
signature OR an appended signature i.e. to use
"appraise func=MODULE_CHECK appraise_type=imasig|modsig".
Reported-by: Karel Srot <ksrot@redhat.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Split most of the rootid_owns_currentns() functionality
into a more generic rootid_owns_ns() function which
will be easier to write tests for.
Rename the functions and variables to make clear that
the ids being tested could be any uid.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
CC: Ryan Foster <foster.ryan.r@gmail.com>
CC: Christian Brauner <brauner@kernel.org>
---
v2: change the function parameter documentation to mollify the bot.
At this point there are very few call chains that might lead to
d_make_discardable() on a dentry that hadn't been made persistent:
calls of simple_unlink() and simple_rmdir() in configfs and
apparmorfs.
Both filesystems do pin (part of) their contents in dcache, but
they are currently playing very unusual games with that. Converting
them to more usual patterns might be possible, but it's definitely
going to be a long series of changes in both cases.
For now the easiest solution is to have both stop using simple_unlink()
and simple_rmdir() - that allows to make d_make_discardable() warn
when given a non-persistent dentry.
Rather than giving them full-blown private copies (with calls of
d_make_discardable() replaced with dput()), let's pull the parts of
simple_unlink() and simple_rmdir() that deal with timestamps and link
counts into separate helpers (__simple_unlink() and __simple_rmdir()
resp.) and have those used by configfs and apparmorfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
securityfs uses simple_recursive_removal(), but does not bother to mark
dentries persistent. This is the only place where it still happens; get
rid of that irregularity.
* use simple_{start,done}_creating() and d_make_persitent(); kill_litter_super()
use was already gone, since we empty the filesystem instance before it gets
shut down.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tree has invariant part + two subtrees that get replaced upon each
policy load. Invariant parts stay for the lifetime of filesystem,
these two subdirs - from policy load to policy load (serialized
on lock_rename(root, ...)).
All object creations are via d_alloc_name()+d_add() inside selinuxfs,
all removals are via simple_recursive_removal().
Turn those d_add() into d_make_persistent()+dput() and that's mostly it.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
allocating dentry after the inode has been set up reduces the amount
of boilerplate - "attach this inode under that name and this parent
or drop inode in case of failure" simplifies quite a few places.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't bother to store the dentry of /policy_capabilities - it belongs
to invariant part of tree and we only use it to populate that directory,
so there's no reason to keep it around afterwards.
Same situation as with /avc, /ss, etc. There are two directories that
get replaced on policy load - /class and /booleans. These we need to
stash (and update the pointers on policy reload); /policy_capabilities
is not in the same boat.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Entirely static tree populated by simple_fill_super(). Can use
kill_anon_super() as-is.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These are guaranteed to be empty by the time they are shut down;
both are single-instance and there is an internal mount maintained
for as long as there is any contents.
Both have that internal mount pinned by every object in root.
In other words, kill_litter_super() boils down to kill_anon_super()
for those.
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Paul Moore <paul@paul-moore> (LSM)
Acked-by: Andreas Hindborg <a.hindborg@kernel.org> (configfs)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A few callers want to lock for a rename and already have both dentries.
Also debugfs does want to perform a lookup but doesn't want permission
checking, so start_renaming_dentry() cannot be used.
This patch introduces start_renaming_two_dentries() which is given both
dentries. debugfs performs one lookup itself. As it will only continue
with a negative dentry and as those cannot be renamed or unlinked, it is
safe to do the lookup before getting the rename locks.
overlayfs uses start_renaming_two_dentries() in three places and selinux
uses it twice in sel_make_policy_nodes().
In sel_make_policy_nodes() we now lock for rename twice instead of just
once so the combined operation is no longer atomic w.r.t the parent
directory locks. As selinux_state.policy_mutex is held across the whole
operation this does not open up any interesting races.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-13-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
start_removing_dentry() is similar to start_removing() but instead of
providing a name for lookup, the target dentry is given.
start_removing_dentry() checks that the dentry is still hashed and in
the parent, and if so it locks and increases the refcount so that
end_removing() can be used to finish the operation.
This is used in cachefiles, overlayfs, smb/server, and apparmor.
There will be other users including ecryptfs.
As start_removing_dentry() takes an extra reference to the dentry (to be
put by end_removing()), there is no need to explicitly take an extra
reference to stop d_delete() from using dentry_unlink_inode() to negate
the dentry - as in cachefiles_delete_object(), and ksmbd_vfs_unlink().
cachefiles_bury_object() now gets an extra ref to the victim, which is
drops. As it includes the needed end_removing() calls, the caller
doesn't need them.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-9-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace set_access(), set_majmin(), and type_to_char() with new helpers
seq_putaccess(), seq_puttype(), and seq_putversion() that write directly
to 'seq_file'.
Simplify devcgroup_seq_show() by hard-coding "a *:* rwm", and use the
new seq_put* helper functions to list the exceptions otherwise.
This allows us to remove the intermediate string buffers while
maintaining the same functionality, including wildcard handling.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is a preparation patch, no functional change.
Signed-off-by: Hongru Zhang <zhanghongru@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
On mobile device high-load situations, permission check can happen
more than 90,000/s (8 core system). With default 512 cache nodes
configuration, avc cache miss happens more often and occasionally
leads to long time (>2ms) irqs off on both big and little cores,
which decreases system real-time capability.
An actual call stack is as follows:
=> avc_compute_av
=> avc_perm_nonode
=> avc_has_perm_noaudit
=> selinux_capable
=> security_capable
=> capable
=> __sched_setscheduler
=> do_sched_setscheduler
=> __arm64_sys_sched_setscheduler
=> invoke_syscall
=> el0_svc_common
=> do_el0_svc
=> el0_svc
=> el0t_64_sync_handler
=> el0t_64_sync
Although we can expand avc nodes through /sys/fs/selinux/cache_threshold
to mitigate long time irqs off, hash conflicts make the bucket average
length longer because of the fixed size of cache slots, leading to
avc_search_node() latency increase.
So introduce a new config to make avc cache slot size also configurable,
and with fine tuning, we can mitigate long time irqs off with slightly
avc_search_node() performance regression.
Theoretically, the main overhead is memory consumption.
Signed-off-by: Hongru Zhang <zhanghongru@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Instead of passing pkey_info into dump_options by value, using a
pointer instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prior to this change, no security hooks were called at the creation of a
memfd file. It means that, for SELinux as an example, it will receive
the default type of the filesystem that backs the in-memory inode. In
most cases, that would be tmpfs, but if MFD_HUGETLB is passed, it will
be hugetlbfs. Both can be considered implementation details of memfd.
It also means that it is not possible to differentiate between a file
coming from memfd_create and a file coming from a standard tmpfs mount
point.
Additionally, no permission is validated at creation, which differs from
the similar memfd_secret syscall.
Call security_inode_init_security_anon during creation. This ensures
that the file is setup similarly to other anonymous inodes. On SELinux,
it means that the file will receive the security context of its task.
The ability to limit fexecve on memfd has been of interest to avoid
potential pitfalls where /proc/self/exe or similar would be executed
[1][2]. Reuse the "execute_no_trans" and "entrypoint" access vectors,
similarly to the file class. These access vectors may not make sense for
the existing "anon_inode" class. Therefore, define and assign a new
class "memfd_file" to support such access vectors.
Guard these changes behind a new policy capability named "memfd_class".
[1] https://crbug.com/1305267
[2] https://lore.kernel.org/lkml/20221215001205.51969-1-jeffxu@google.com/
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new LSM notifier event, LSM_STARTED_ALL, which is fired once at
boot when all of the LSMs have been started.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The LSM framework itself registers a small number of initcalls, this
patch converts these initcalls into the new initcall mechanism.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux currently has a number of initcalls so we've created a new
function, selinux_initcall(), which wraps all of these initcalls so
that we have a single initcall function that can be registered with the
LSM framework.
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch converts IMA and EVM to use the LSM frameworks's initcall
mechanism. It moved the integrity_fs_init() call to ima_fs_init() and
evm_init_secfs(), to work around the fact that there is no "integrity" LSM,
and introduced integrity_fs_fini() to remove the integrity directory, if
empty. Both integrity_fs_init() and integrity_fs_fini() support the
scenario of being called by both the IMA and EVM LSMs.
This patch does not touch any of the platform certificate code that
lives under the security/integrity/platform_certs directory as the
IMA/EVM developers would prefer to address that in a future patchset.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
[PM: adjust description as discussed over email]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Linus Torvalds
Jarkko Sakkinen
Yanzhu Huang
Borislav Petkov (AMD)
Jarkko Sakkinen
Thorsten Blum
Zhao Yipeng
Paul Moore
Stephen Smalley
Coiby Xu
Serge Hallyn
Al Viro
NeilBrown
Mateusz Guzik
Casey Schaufler
Christian Brauner
Hongru Zhang
Herbert Xu
Thiébaud Weksteen
Roberto Sassu