RTM_NEWROUTE looks up dev under RCU (ip_route_output(),
ipv6_stub->ipv6_dst_lookup_flow(), netdev_get_by_index()),
and each neighbour holds the refcnt of its dev.
Also, net->mpls.platform_label is protected by a dedicated
per-netns mutex.
Now, no MPLS code depends on RTNL.
Let's drop RTNL for RTM_NEWROUTE, RTM_DELROUTE, and RTM_GETROUTE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPLS (re)uses RTNL to protect net->mpls.platform_label,
but the lock does not need to be RTNL at all.
Let's protect net->mpls.platform_label with a dedicated
per-netns mutex.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mpls_netconf_get_devconf() calls __dev_get_by_index(),
and this only depends on RTNL.
Let's convert mpls_netconf_get_devconf() to RCU and use
dev_get_by_index_rcu().
Note that nlmsg_new() is moved ahead to use GFP_KERNEL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mpls_dump_routes() sets fib_dump_filter.rtnl_held to true and
calls __dev_get_by_index() in mpls_valid_fib_dump_req().
This is the only RTNL dependant in mpls_dump_routes().
Also, synchronize_rcu() in resize_platform_label_table()
guarantees that net->mpls.platform_label is alive under RCU.
Let's convert mpls_dump_routes() to RCU and use dev_get_by_index_rcu().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In many places, we uses rtnl_dereference() twice for
net->mpls.platform_label and net->mpls.platform_label[index].
Let's replace the code with mpls_route_input().
We do not use mpls_route_input() in mpls_dump_routes() since
we will rely on RCU there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mpls_route_input_rcu() is called from mpls_forward() and
mpls_getroute().
The former is under RCU, and the latter is under RTNL, so
mpls_route_input_rcu() uses rcu_dereference_rtnl().
Let's use rcu_dereference() in mpls_route_input_rcu() and
add an RTNL variant for mpls_getroute().
Later, we will remove rtnl_dereference() there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will replace RTNL with a per-netns mutex to protect dev->mpls_ptr.
Then, we will use rcu_dereference_protected() with the lockdep_is_held()
annotation, which requires net to access the per-netns mutex.
However, dev_net(dev) is not safe without RTNL.
Let's pass net to mpls_dev_get().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mpls_dev_get() uses rcu_dereference_rtnl() to fetch dev->mpls_ptr.
We will replace RTNL with a dedicated mutex to protect the field.
Then, we will use rcu_dereference_protected() for clarity.
Let's add mpls_dev_rcu() for the RCU reader.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mpls_forward() and mpls_xmit() are called under RCU.
Let's use in6_dev_rcu() and dev_net_rcu() there to annotate
as such.
Now we pass net to mpls_stats_inc_outucastpkts() not to read
dev_net_rcu() twice.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will protect net->mpls.platform_label by a dedicated mutex.
Then, we need to wrap functions called from mpls_dev_notify()
with the mutex.
As a prep, let's unify the return paths.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPLS uses RTNL
1) to guarantee the lifetime of struct mpls_nh.nh_dev
2) to protect net->mpls.platform_label
, but neither actually requires RTNL.
If we do not call dev_put() in find_outdev() and call it
just before freeing struct mpls_route, we can drop RTNL for 1).
Let's hold the refcnt of mpls_nh.nh_dev and track it with
netdevice_tracker.
Two notable changes:
If mpls_nh_build_multi() fails to set up a neighbour, we need
to call netdev_put() for successfully created neighbours in
mpls_rt_free_rcu(), so the number of neighbours (rt->rt_nhn)
is now updated in each iteration.
When a dev is unregistered, mpls_ifdown() clones mpls_route
and replaces it with the clone, so the clone requires extra
netdev_hold().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When mpls_label_ok() returns false, it does not need to update *index.
Let's remove is_ok and return early.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20251029173344.2934622-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit cc34acd577 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-8-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-5-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The next patch will add init_srcu_struct() in rtnl_af_register(),
then we need to handle its error.
Let's add the error handling in advance to make the following
patch cleaner.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since commit 1202cdd665 ("Remove DECnet support from kernel"),
NEIGH_DN_TABLE is no longer used.
MPLS has implicit dependency on it in nla_put_via(), but nla_get_via()
does not support DECnet.
Let's remove NEIGH_DN_TABLE.
Now, neigh_tables[] has only 2 elements and no extra iteration
for DECnet in many places.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241014235216.10785-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since introduced, mpls_init() has been ignoring the returned
value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 03c0566542 ("mpls: Netlink commands to add, remove, and dump routes")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
* Remove the zeroing out of an array element (to make it look like a
sentinel) in neigh_sysctl_register and lowpan_frags_ns_sysctl_register
This is not longer needed and is safe after commit c899710fe7
("networking: Update to register_net_sysctl_sz") added the array size
to the ctl_table registration.
* Replace the for loop stop condition in sysctl_core_net_init that tests
for procname == NULL with one that depends on array size
* Removed the "-1" in mpls_net_init that adjusted for having an extra
empty element when looping over ctl_table arrays
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Use for_each_netdev_dump() to no longer rely
on net->dev_index_head hash table.
- No longer care of net->dev_base_seq
- Fix return value at the end of a dump,
so that NLMSG_DONE can be appended to current skb,
saving one recvmsg() system call.
- No longer grab RTNL, RCU protection is enough,
afer adding one READ_ONCE(mdev->input_enabled)
in mpls_netconf_fill_devconf()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240410111951.2673193-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a "scope" parameter to ip_route_output() so that callers don't have
to override the tos parameter with the RTO_ONLINK flag if they want a
local scope.
This will allow converting flowi4_tos to dscp_t in the future, thus
allowing static analysers to flag invalid interactions between
"tos" (the DSCP bits) and ECN.
Only three users ask for local scope (bonding, arp and atm). The others
continue to use RT_SCOPE_UNIVERSE. While there, add a comment to warn
users about the limitations of ip_route_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com> # infiniband
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new field into struct fib_dump_filter, to let callers
tell if they use RTNL locking or RCU.
This is used in the following patch, when inet_dump_fib()
no longer holds RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move from register_net_sysctl to register_net_sysctl_sz for all the
networking related files. Do this while making sure to mirror the NULL
assignments with a table_size of zero for the unprivileged users.
We need to move to the new function in preparation for when we change
SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do
so would erroneously allow ARRAY_SIZE() to be called on a pointer. We
hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all
the relevant net sysctl registering functions to register_net_sysctl_sz
in subsequent commits.
An additional size function was added to the following files in order to
calculate the size of an array that is defined in another file:
include/net/ipv6.h
net/ipv6/icmp.c
net/ipv6/route.c
net/ipv6/sysctl_net_ipv6.c
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lianhui reports that when MPLS fails to register the sysctl table
under new location (during device rename) the old pointers won't
get overwritten and may be freed again (double free).
Handle this gracefully. The best option would be unregistering
the MPLS from the device completely on failure, but unfortunately
mpls_ifdown() can fail. So failing fully is also unreliable.
Another option is to register the new table first then only
remove old one if the new one succeeds. That requires more
code, changes order of notifications and two tables may be
visible at the same time.
sysctl point is not used in the rest of the code - set to NULL
on failures and skip unregister if already NULL.
Reported-by: lianhui tang <bluetlh@gmail.com>
Fixes: 0fae3bf018 ("mpls: handle device renames for per-device sysctls")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the
reader is in preemptible context and the writer side
(u64_stats_update_begin*()) runs in an interrupt context (IRQ or
softirq) then the writer can update the stats during the read operation.
This update remains undetected.
Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP
are not interrupted by a writer. 32bit-SMP remains unaffected by this
change.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Catherine Sullivan <csully@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Cc: Dimitris Michailidis <dmichail@fungible.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: oss-drivers@corigine.com
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable outside the switch, which silences the warning:
./net/mpls/af_mpls.c:1624:21: error: statement will never be executed [-Werror=switch-unreachable]
1624 | int err;
| ^~~
Signed-off-by: Victor Erminpour <victor.erminpour@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are separate for_nexthops and change_nexthops iterators. The
for_nexthops variant should use const.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following the previous commit, nh_dev can no longer be accessed and
modified concurrently.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are various problems related to netlink notifications for mpls route
changes in response to interfaces being deleted:
* delete interface of only nexthop
DELROUTE notification is missing RTA_OIF attribute
* delete interface of non-last nexthop
NEWROUTE notification is missing entirely
* delete interface of last nexthop
DELROUTE notification is missing nexthop
All of these problems stem from the fact that existing routes are modified
in-place before sending a notification. Restructure mpls_ifdown() to avoid
changing the route in the DELROUTE cases and to create a copy in the
NEWROUTE case.
Fixes: f8efb73c97 ("mpls: multipath route support")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Defer ttl decrement to optimize in tx_err case. There is no need
to decrease ttl in the case of goto tx_err.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable err is set to -ENOMEM but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
net/mpls/af_mpls.c:1022:2: warning: Value stored to 'err' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 394de110a7 ("net: Added pointer check for
dst->ops->neigh_lookup in dst_neigh_lookup_skb") added a test in
dst_neigh_lookup_skb() to avoid a NULL pointer dereference. The root
cause was the MPLS forwarding code, which doesn't call skb_dst_drop()
on incoming packets. That is, if the packet is received from a
collect_md device, it has a metadata_dst attached to it that doesn't
implement any dst_ops function.
To align the MPLS behaviour with IPv4 and IPv6, let's drop the dst in
mpls_forward(). This way, dst_neigh_lookup_skb() doesn't need to test
->neigh_lookup any more. Let's keep a WARN condition though, to
document the precondition and to ease detection of such problems in the
future.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/f8c2784c13faa54469a2aac339470b1049ca6b63.1604102750.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPLS has no dependency with the device type of underlying devices.
Hence the device type check to add mpls support for devices can be
avoided.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for IPv6 tunnel devices in AF_MPLS.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.
All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().
This requires some changes in all the callers, as these two functions
take different arguments and have different return types.
Fixes: 5f81bd2e5d ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.
On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.
The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:
$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248
Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.
This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:
# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%
[mcroce@redhat.com: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We currently have two levels of strict validation:
1) liberal (default)
- undefined (type >= max) & NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
- garbage at end of message accepted
2) strict (opt-in)
- NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
Split out parsing strictness into four different options:
* TRAILING - check that there's no trailing data after parsing
attributes (in message or nested)
* MAXTYPE - reject attrs > max known type
* UNSPEC - reject attributes with NLA_UNSPEC policy entries
* STRICT_ATTRS - strictly validate attribute size
The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().
Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.
We end up with the following renames:
* nla_parse -> nla_parse_deprecated
* nla_parse_strict -> nla_parse_deprecated_strict
* nlmsg_parse -> nlmsg_parse_deprecated
* nlmsg_parse_strict -> nlmsg_parse_deprecated_strict
* nla_parse_nested -> nla_parse_nested_deprecated
* nla_validate_nested -> nla_validate_nested_deprecated
Using spatch, of course:
@@
expression TB, MAX, HEAD, LEN, POL, EXT;
@@
-nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
+nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression TB, MAX, NLA, POL, EXT;
@@
-nla_parse_nested(TB, MAX, NLA, POL, EXT)
+nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)
@@
expression START, MAX, POL, EXT;
@@
-nla_validate_nested(START, MAX, POL, EXT)
+nla_validate_nested_deprecated(START, MAX, POL, EXT)
@@
expression NLH, HDRLEN, MAX, POL, EXT;
@@
-nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
+nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)
For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.
Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.
Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.
In effect then, this adds fully strict validation for any new command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.
Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().
Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:
@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)
@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The header contains rtnh_ macros so rename the file accordingly.
Allows a later patch to use the nexthop.h name for the new
nexthop code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima
Stanislav Fomichev
Breno Leitao
Kuniyuki Iwashima
Li Zetao
Joel Granados
Thomas Weißschuh
Eric Dumazet
Guillaume Nault
Joel Granados
Jakub Kicinski
Thomas Gleixner
Sebastian Andrzej Siewior
GONG, Ruiqi
Victor Erminpour
Benjamin Poirier
Kangmin Park
Jiapeng Chong
Gustavo A. R. Silva
Martin Varghese
Vadim Fedorenko
Christoph Hellwig
Sabrina Dubroca
Matteo Croce
Johannes Berg
Michal Kubecek
David Ahern