- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support for
it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQWN/gAKCRAdayaRccAa
ljUzAQCGh5zhfwsCfMc5M7/9v2FiEBKNzTc/xTK04vWdZ3A39QEA6XuyVx+QPBkS
ts7gPrR6NC7AokdqTHXKhBW/ebaNOw0=
=GmCb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
Fixes log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action(). Updates email address for Rae Moar in
MAINTAINERS KUnit entry.
-----BEGIN PGP SIGNATURE-----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=stUG
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fix log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action().
Update email address for Rae Moar in MAINTAINERS KUnit entry"
* tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Update KUnit email address for Rae Moar
kunit: prevent log overwrite in param_tests
kunit: test_dev_action: Correctly cast 'priv' pointer to long*
Migrate the arm-optimized BLAKE2b code from arch/arm/crypto/ to
lib/crypto/arm/. This makes the BLAKE2b library able to use it, and it
also simplifies the code because it's easier to integrate with the
library than crypto_shash.
This temporarily makes the arm-optimized BLAKE2b code unavailable via
crypto_shash. A later commit reimplements the blake2b-* crypto_shash
algorithms on top of the BLAKE2b library API, making it available again.
Note that as per the lib/crypto/ convention, the optimized code is now
enabled by default. So, this also fixes the longstanding issue where
the optimized BLAKE2b code was not enabled by default.
To see the diff from arch/arm/crypto/blake2b-neon-glue.c to
lib/crypto/arm/blake2b.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a library API for BLAKE2b, closely modeled after the BLAKE2s API.
This will allow in-kernel users such as btrfs to use BLAKE2b without
going through the generic crypto layer. In addition, as usual the
BLAKE2b crypto_shash algorithms will be reimplemented on top of this.
Note: to create lib/crypto/blake2b.c I made a copy of
lib/crypto/blake2s.c and made the updates from BLAKE2s => BLAKE2b. This
way, the BLAKE2s and BLAKE2b code is kept consistent. Therefore, it
borrows the SPDX-License-Identifier and Copyright from
lib/crypto/blake2s.c rather than crypto/blake2b_generic.c.
The library API uses 'struct blake2b_ctx', consistent with other
lib/crypto/ APIs. The existing 'struct blake2b_state' will be removed
once the blake2b crypto_shash algorithms are updated to stop using it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
A couple more small cleanups to the BLAKE2s code before these things get
propagated into the BLAKE2b code:
- Drop 'const' from some non-pointer function parameters. It was a bit
excessive and not conventional.
- Rename 'block' argument of blake2s_compress*() to 'data'. This is for
consistency with the SHA-* code, and also to avoid the implication
that it points to a singular "block".
No functional changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
For consistency with the SHA-1, SHA-2, SHA-3 (in development), and MD5
library APIs, rename blake2s_state to blake2s_ctx.
As a refresher, the ctx name:
- Is a bit shorter.
- Avoids confusion with the compression function state, which is also
often called the state (but is just part of the full context).
- Is consistent with OpenSSL.
Not a big deal, of course. But consistency is nice. With a BLAKE2b
library API about to be added, this is a convenient time to update this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reorder the parameters of blake2s() from (out, in, key, outlen, inlen,
keylen) to (key, keylen, in, inlen, out, outlen).
This aligns BLAKE2s with the common conventions of pairing buffers and
their lengths, and having outputs follow inputs. This is widely used
elsewhere in lib/crypto/ and crypto/, and even elsewhere in the BLAKE2s
code itself such as blake2s_init_key() and blake2s_final(). So
blake2s() was a bit of an exception.
Notably, this results in the same order as hmac_*_usingrawkey().
Note that since the type signature changed, it's not possible for a
blake2s() call site to be silently missed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add FIPS cryptographic algorithm self-tests for all SHA-1 and SHA-2
algorithms. Following the "Implementation Guidance for FIPS 140-3"
document, to achieve this it's sufficient to just test a single test
vector for each of HMAC-SHA1, HMAC-SHA256, and HMAC-SHA512.
Just run these tests in the initcalls, following the example of e.g.
crypto/kdf_sp800108.c. Note that this should meet the FIPS self-test
requirement even in the built-in case, given that the initcalls run
before userspace, storage, network, etc. are accessible.
This does not fix a regression, seeing as lib/ has had SHA-1 support
since 2005 and SHA-256 support since 2018. Neither ever had FIPS
self-tests. Moreover, fips=1 support has always been an unfinished
feature upstream. However, with lib/ now being used more widely, it's
now seeing more scrutiny and people seem to want these now [1][2].
[1] https://lore.kernel.org/r/3226361.1758126043@warthog.procyon.org.uk/
[2] https://lore.kernel.org/r/f31dbb22-0add-481c-aee0-e337a7731f8e@oracle.com/
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251011001047.51886-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Commit 5ff8c11775 ("KMSAN: Remove tautological checks") changed
CONFIG_HAVE_KMSAN_COMPILER from a dynamic check for
'-fsanitize=kernel-memory' to just being true for CONFIG_CC_IS_CLANG.
This missed the fact that not all architectures supported
'-fsanitize=kernel-memory' at the same time. For example, SystemZ / s390
gained support for KMSAN in clang-18 [1], so builds with clang-15
through clang-17 can select KMSAN but they error with:
clang-16: error: unsupported option '-fsanitize=kernel-memory' for target 's390x-unknown-linux-gnu'
Restore the cc-option check for '-fsanitize=kernel-memory' to make sure
the compiler target properly supports '-fsanitize=kernel-memory'. The
check for '-msan-disable-checks=1' does not need to be restored because
all supported clang versions for building the kernel support it.
Fixes: 5ff8c11775 ("KMSAN: Remove tautological checks")
Link: a3e56a8792 [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202510220236.AVuXXCYy-lkp@intel.com/
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251023-fix-kmsan-check-s390-clang-v1-1-4e6df477a4cc@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
When running parameterized tests, each test case is initialized with
kunit_init_test(). This function takes the test_case->log as a parameter
but it clears it via string_stream_clear() on each iteration.
This results in only the log from the last parameter being preserved in
the test_case->log and the results from the previous parameters are lost
from the debugfs entry.
Fix this by manually setting the param_test.log to the test_case->log
after it has been initialized. This prevents kunit_init_test() from
clearing the log on each iteration.
Link: https://lore.kernel.org/r/20251024190101.2091549-1-cmllamas@google.com
Fixes: 4b59300ba4 ("kunit: Add parent kunit for parameterized test context")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
freader_fetch currently reads from at most two folios. When a read spans
into a third folio, the overflow bytes are copied adjacent to the second
folio’s data instead of being handled as a separate folio.
This patch modifies fetch algorithm to support reading from many folios.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251026203853.135105-5-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move struct freader and prototypes of the functions operating on it into
the buildid.h.
This allows reusing freader outside buildid, e.g. for file dynptr
support added later.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251026203853.135105-4-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This old alias for in_hardirq() has been marked as deprecated since
2020; remove the stragglers.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024180654.1691095-1-willy@infradead.org
The previous implementation incorrectly assumed the original type of
'priv' was void**, leading to an unnecessary and misleading
cast. Correct the cast of the 'priv' pointer in test_dev_action() to
its actual type, long*, removing an unnecessary cast.
As an additional benefit, this fixes an out-of-bounds CHERI fault on
hardware with architectural capabilities. The original implementation
tried to store a capability-sized pointer using the priv
pointer. However, the priv pointer's capability only granted access to
the memory region of its original long type, leading to a bounds
violation since the size of a long is smaller than the size of a
capability. This change ensures that the pointer usage respects the
capabilities' bounds.
Link: https://lore.kernel.org/r/20251017092814.80022-1-florian.schmaus@codasip.com
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For consistency with the other function templates, change
_subtree_search_*() to use the user-supplied ITSTATIC rather than the
hard-coded 'static'.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
KHO test stores physical addresses of the preserved folios directly in
fdt. Use kho_preserve_vmalloc() instead of it and kho_restore_vmalloc()
to retrieve the addresses after kexec.
This makes the test more scalable from one side and adds tests coverage
for kho_preserve_vmalloc() from the other.
Link: https://lkml.kernel.org/r/20250921054458.4043761-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaOAhtRQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bGkAP91Vptp6rJj3R0N0M338tzkVaeybA+V
fjOHnuB8AvF+FwD/XGLF+lcIFiB8GizXGf/OoyXJwYwciNU7hEdONh5dzQ0=
=euve
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Just a couple of changes: crypto code cleanup and a IMA xattr bug fix"
* tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
lib/digsig: Use SHA-1 library instead of crypto_shash
integrity: Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS
Drivers:
- Add ciphertext hiding support to ccp.
- Add hashjoin, gather and UDMA data move features to hisilicon.
- Add lz4 and lz77_only to hisilicon.
- Add xilinx hwrng driver.
- Add ti driver with ecb/cbc aes support.
- Add ring buffer idle and command queue telemetry for GEN6 in qat.
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable.
- Fix CPU number wraparound in padata.
-----BEGIN PGP SIGNATURE-----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=knnk
-----END PGP SIGNATURE-----
Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
Now that a SHA-1 library API is available, use it instead of
crypto_shash. This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
- The 3 patch series "ida: Remove the ida_simple_xxx() API" from
Christophe Jaillet completes the removal of this legacy IDR API.
- The 9 patch series "panic: introduce panic status function family"
from Jinchao Wang provides a number of cleanups to the panic code and
its various helpers, which were rather ad-hoc and scattered all over the
place.
- The 5 patch series "tools/delaytop: implement real-time keyboard
interaction support" from Fan Yu adds a few nice user-facing usability
changes to the delaytop monitoring tool.
- The 3 patch series "efi: Fix EFI boot with kexec handover (KHO)" from
Evangelos Petrongonas fixes a panic which was happening with the
combination of EFI and KHO.
- The 2 patch series "Squashfs: performance improvement and a sanity
check" from Phillip Lougher teaches squashfs's lseek() about
SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen
microbenchmark.
- Plus another 50-odd singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN78zwAKCRDdBJ7gKXxA
jhLeAQCddTv0XtSUTrvBvmrJVUBrQQeJc+LtNopMIjfAF/WAWAEAogSVKxg+HHEB
GaVixx4zDriNzEqrqiCx9rm4l+YooQA=
=XRe0
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
- The 3 patch series "mm, swap: improve cluster scan strategy" from
Kairui Song improves performance and reduces the failure rate of swap
cluster allocation.
- The 4 patch series "support large align and nid in Rust allocators"
from Vitaly Wool permits Rust allocators to set NUMA node and large
alignment when perforning slub and vmalloc reallocs.
- The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
for virtual address spaces for ops-level DAMOS filters.
- The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
from Suren Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps.
- The 2 patch series "mm/mincore: minor clean up for swap cache
checking" from Kairui Song performs some cleanup in the swap code.
- The 11 patch series "mm: vm_normal_page*() improvements" from David
Hildenbrand provides code cleanup in the pagemap code.
- The 5 patch series "add persistent huge zero folio support" from
Pankaj Raghav provides a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero.
- The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
few touchups to the recently added Kexec Handover feature.
- The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To
end the constant struggle with space shortage on 32-bit conflicting with
64-bit's needs.
- The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
cleans up some swap code.
- The 7 patch series "selftests/mm: Fix false positives and skip
unsupported tests" from Donet Tom fixes a few things in our selftests
code.
- The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
THPs when advised" from David Hildenbrand "allows individual processes
to opt-out of THP=always into THP=madvise, without affecting other
workloads on the system".
It's a long story - the [1/N] changelog spells out the considerations.
- The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
gets us started on the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc.
- The 3 patch series "Tiny optimization for large read operations" from
Chi Zhiling improves the efficiency of the pagecache read path.
- The 5 patch series "Better split_huge_page_test result check" from Zi
Yan improves our folio splitting selftest code.
- The 2 patch series "test that rmap behaves as expected" from Wei Yang
adds some rmap selftests.
- The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
removes that function and converts its two remaining callers.
- The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
fixes some UFFD selftests issues.
- The 3 patch series "introduce kernel file mapped folios" from Boris
Burkov introduces the concept of "kernel file pages". Using these
permits btrfs to account its metadata pages to the root cgroup, rather
than to the cgroups of random inappropriate tasks.
- The 2 patch series "mm/pageblock: improve readability of some
pageblock handling" from Wei Yang provides some readability improvements
to the page allocator code.
- The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
Park teaches DAMON to understand arm32 highmem.
- The 4 patch series "tools: testing: Use existing atomic.h for
vma/maple tests" from Brendan Jackman performs some code cleanups and
deduplication under tools/testing/.
- The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
Liam Howlett fixes a couple of 32-bit issues in
tools/testing/radix-tree.c.
- The 2 patch series "kasan: unify kasan_enabled() and remove
arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
arch-specific initialization code into a common arch-neutral
implementation.
- The 3 patch series "mm: remove zpool" from Johannes Weiner removes
zspool - an indirection layer which now only redirects to a single thing
(zsmalloc).
- The 2 patch series "mm: task_stack: Stack handling cleanups" from
Pasha Tatashin makes a couple of cleanups in the fork code.
- The 37 patch series "mm: remove nth_page()" from David Hildenbrand
makes rather a lot of adjustments at various nth_page() callsites,
eventually permitting the removal of that undesirable helper function.
- The 2 patch series "introduce kasan.write_only option in hw-tags" from
Yeoreum Yun creates a KASAN read-only mode for ARM, using that
architecture's memory tagging feature. It is felt that a read-only mode
KASAN is suitable for use in production systems rather than debug-only.
- The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
from Kefeng Wang does some tidying in the hugetlb folio allocation code.
- The 12 patch series "mm: establish const-correctness for pointer
parameters" from Max Kellermann makes quite a number of the MM API
functions more accurate about the constness of their arguments. This
was getting in the way of subsystems (in this case CEPH) when they
attempt to improving their own const/non-const accuracy.
- The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
fixes a number of code sites which were confused over when to use
free_pages() vs __free_pages().
- The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
Ryhl makes the mapletree code accessible to Rust. Required by nouveau
and by its forthcoming successor: the new Rust Nova driver.
- The 2 patch series "selftests/mm: split_huge_page_test:
split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
some cleanups to the thp selftesting code.
- The 14 patch series "mm, swap: introduce swap table as swap cache
(phase I)" from Chris Li and Kairui Song is the first step along the
path to implementing "swap tables" - a new approach to swap allocation
and state tracking which is expected to yield speed and space
improvements. This patchset itself yields a 5-20% performance benefit
in some situations.
- The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
the new memdesc layer to clean up the ptdesc code a little.
- The 3 patch series "Fix va_high_addr_switch.sh test failure" from
Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
- The 2 patch series "Minor fixes for memory allocation profiling" from
Suren Baghdasaryan addresses a couple of minor issues in relatively new
memory allocation profiling feature.
- The 3 patch series "Small cleanups" from Matthew Wilcox has a few
cleanups in preparation for more memdesc work.
- The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
furtherance of supporting arm highmem.
- The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
warnings" from Muhammad Anjum adds that compiler check to selftests code
and fixes the fallout, by removing dead code.
- The 10 patch series "Improvements to Victim Process Thawing and OOM
Reaper Traversal Order" from zhongjinji makes a number of improvements
in the OOM killer: mainly thawing a more appropriate group of victim
threads so they can release resources.
- The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
- The 7 patch series "mm/damon: define and use DAMON initialization
check function" from SeongJae Park implement reliability and
maintainability improvements to a recently-added bug fix.
- The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
non-idle ages" from SeongJae Park provides additional transparency to
userspace clients of the DAMON_STAT information.
- The 2 patch series "Expand scope of khugepaged anonymous collapse"
from Dev Jain removes some constraints on khubepaged's collapsing of
anon VMAs. It also increases the success rate of MADV_COLLAPSE against
an anon vma.
- The 2 patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
removal of file_operations.mmap(). This patchset concentrates upon
clearing up the treatment of stacked filesystems.
- The 6 patch series "mm: Improve mlock tracking for large folios" from
Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
of large folios. /proc/meminfo's "Mlocked" field became more accurate.
- The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
during fork" from Donet Tom fixes several user-visible KSM stats
inaccuracies across forks and adds selftest code to verify these
counters.
- The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
Yang addresses some potential but presently benign issues in KSM's
mm_slot handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
=4mhY
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmja74IbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiacR4H/04aBsr7LZnTJVeZLQwK
HKoOwXBqiQyqPdjKXGKnp7Mh9gRp2W3V11VsYTuDJNUS+Vz5YXW0z8cRnUfZ3SYs
l+GZC3vZeAy2EVJE1U6Mb673hU8vziI80IO2q/tGzaj9a+wC3L0lemc+YFQTwG+u
pMtt8zU2vHRjgkx8TNNqJBBOLLDV+RzIl8pqXVnh4eju6x6ZdreGnjXaePYMdjG0
fXLf9XwIeWREqbfeOCEOB50Ts71kkdiOeskwnJyfCTDT8WTu3zC/dICqfh66e3Gg
8hQKvMsuKpm/FwbtgdB0WvaDjENH6PmY+ubLYVxwvNpcsTSqfe0IYGm+HpUP+TPf
m+Y=
=w+JL
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- A new layer for caching objects for allocation and free via percpu
arrays called sheaves.
The aim is to combine the good parts of SLAB (lower-overhead and
simpler percpu caching, compared to SLUB) without the past issues
with arrays for freeing remote NUMA node objects and their flushing.
It also allows more efficient kfree_rcu(), and cheaper object
preallocations for cases where the exact number of objects is
unknown, but an upper bound is.
Currently VMAs and maple nodes are using this new caching, with a
plan to enable it for all caches and remove the complex SLUB fastpath
based on cpu (partial) slabs and this_cpu_cmpxchg_double().
(Vlastimil Babka, with Liam Howlett and Pedro Falcato for the maple
tree changes)
- Re-entrant kmalloc_nolock(), which allows opportunistic allocations
from NMI and tracing/kprobe contexts.
Building on prior page allocator and memcg changes, it will result in
removing BPF-specific caches on top of slab (Alexei Starovoitov)
- Various fixes and cleanups. (Kuan-Wei Chiu, Matthew Wilcox, Suren
Baghdasaryan, Ye Liu)
* tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (40 commits)
slab: Introduce kmalloc_nolock() and kfree_nolock().
slab: Reuse first bit for OBJEXTS_ALLOC_FAIL
slab: Make slub local_(try)lock more precise for LOCKDEP
mm: Introduce alloc_frozen_pages_nolock()
mm: Allow GFP_ACCOUNT to be used in alloc_pages_nolock().
locking/local_lock: Introduce local_lock_is_locked().
maple_tree: Convert forking to use the sheaf interface
maple_tree: Add single node allocation support to maple state
maple_tree: Prefilled sheaf conversion and testing
tools/testing: Add support for prefilled slab sheafs
maple_tree: Replace mt_free_one() with kfree()
maple_tree: Use kfree_rcu in ma_free_rcu
testing/radix-tree/maple: Hack around kfree_rcu not existing
tools/testing: include maple-shim.c in maple.c
maple_tree: use percpu sheaves for maple_node_cache
mm, vma: use percpu sheaves for vm_area_struct cache
tools/testing: Add support for changes to slab for sheaves
slab: allow NUMA restricted allocations to use percpu sheaves
tools/testing/vma: Implement vm_refcnt reset
slab: skip percpu sheaves for remote object freeing
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmjbLCgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpoY0D/9J+11BC88pBxCrLKv/V2TwCNokRMi0dU3L
r3EUdA46k0oXmvb6ueZqIcfY2e+IX7rdQkaRbh1zRdsNejqHo4548C3ePWGdBAcM
OdNEGfpehO0aD0td1+mK/NxoJMLhbs5QraPanz+SOkGZOKeF+vGCga5PUDivsr5J
16T9yb7i+isENLdAc2RJbZVyAphqHQlo5GHi5ZIKOVi5cNt8GU/q2sQl7NYmGvHd
aq37svvZHFOhLRajP959Fw9WOxEYITewzQ4UYf1FZjUodJUxO+vCnP0ooBQRlyu8
1B4PYWwSE+Vn3GkQE0Om+mzo9AVPOiLmoAWGxdgJBMyEkZndocr46XEslXOufQ1Z
T3Gu19G6jCxcyByNVhjVnaajYKmvSQAy1w75m4XlfqTRm4f9Om+LAJavUk3RuaOL
7lXKQ7Ql1/Tby9Jmf8afjYYXXotNDNku6rz2P3qtOwAA26mNJfgVt0rO+8XGRDe9
ioLbCkTjslYMc/Oh4jSsbrspsVALbaQMq/Dmah8k0EWb4QAHVgCJyGBoff3hOboI
jD6B1enaKOQVgcjWcjm/FjOk3jv2h3v4X26YWQZTvEc/1PnSnST78Zi/ePhzDdmt
sBALUAS37TfTgNMzrhbHl5Zs13k0C0XyANuayuKuo5hlNnC1wbdap+5FZJOmpuOB
YT+VkYnaOA==
=kOmc
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module.
- Bump the minimum version of LLVM for building the kernel to 15.0.0.
- Upgrade several userspace API checks in headers_check.pl to errors.
- Unify and consolidate CONFIG_WERROR / W=e handling.
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e.
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs).
- Enable -Werror unconditionally when building host programs
(hostprogs).
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS.
- Miscellaneous small changes to scripts and configuration files.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaNrp6QAKCRAdayaRccAa
ljxRAP4hYocKXeWsiJzkTB199P4QUGWf220a9elBmtdJEed07gD/VBnCbSOxG3RO
vS8qbJHwxUFL7a+mDV8RIVXSt99NpAg=
=psG/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
- A seven patch series adds a new parameterized test features
KUnit parameterized tests currently support two primary methods for
getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
These limitations are fixed with a parameterized test method.
- Fixes issues in kunit build artifacts cleanup,
- Fixes parsing skipped test problem in kselftest framework,
- Enables PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
-----BEGIN PGP SIGNATURE-----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=VfHu
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
- Further consolidation of the VDSO infrastructure and the common data
store.
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
-----BEGIN PGP SIGNATURE-----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=i3UB
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which onoly removed it from the core but failed to invoke
the actual device driver shutdown callback. This keeps the timer
active, which prevents power savings and causes pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is a
private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide better
information for analysis.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=A9Tu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
First set of RISC-V updates for the v6.18 merge window, including:
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather than
open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if they
are available
- The ability to identity and communicate to userspace the presence of a
MIPS P8700-specific ISA extension, and to leverage its MIPS-specific PAUSE
implementation in cpu_relax()
- Several other miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----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=nK3D
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather
than open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if
they are available
- The ability to identity and communicate to userspace the presence
of a MIPS P8700-specific ISA extension, and to leverage its
MIPS-specific PAUSE implementation in cpu_relax()
- Several other miscellaneous cleanups
* tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits)
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
riscv: hwprobe: Document MIPS xmipsexectl vendor extension
riscv: hwprobe: Add MIPS vendor extension probing
riscv: Add xmipsexectl instructions
riscv: Add xmipsexectl as a vendor extension
dt-bindings: riscv: Add xmipsexectl ISA extension description
riscv: cpufeature: add validation for zfa, zfh and zfhmin
perf: riscv: skip empty batches in counter start
selftests: riscv: Add README for RISC-V KSelfTest
riscv: sbi: Switch to new sys-off handler API
riscv: Move vendor errata definitions to new header
RISC-V: ACPI: enable parsing the BGRT table
riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG
riscv: pi: use 'targets' instead of extra-y in Makefile
riscv: introduce asm/swab.h
riscv: mmap(): use unsigned offset type in riscv_sys_mmap
drivers/perf: riscv: Remove redundant ternary operators
riscv: mm: Use mmu-type from FDT to limit SATP mode
riscv: mm: Return intended SATP mode for noXlvl options
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
...
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNraNQAKCRA2KwveOeQk
u/DkAPwKPP5BSmVR2wkdpQaXIr3PGA+cbBYp34DMJNujZ9piIwD/WZ+HfGTLoERy
+2Q6HLj9hUdd+Rx3IZ8/w1QmnhUIUAU=
=AwV9
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's ffs()-family
of functions.
- Add KUnit tests for ffs() behavior and const-ness.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNrWngAKCRA2KwveOeQk
u3ZGAPwJTscARU4MspnqpbuAV601dG1TNoJG+8JYH84r+R2jjQEAlmBZB0jaHbC2
qFWjHivD/0ofvihKfAPFgxlakyV1XAg=
=diXF
-----END PGP SIGNATURE-----
Merge tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull ffs const-attribute cleanups from Kees Cook:
"While working on various hardening refactoring a while back we
encountered inconsistencies in the application of __attribute_const__
on the ffs() family of functions.
This series fixes this across all archs and adds KUnit tests.
Notably, this found a theoretical underflow in PCI (also fixed here)
and uncovered an inefficiency in ARC (fixed in the ARC arch PR). I
kept the series separate from the general hardening PR since it is a
stand-alone "topic".
- PCI: Fix theoretical underflow in use of ffs().
- Universally apply __attribute_const__ to all architecture's
ffs()-family of functions.
- Add KUnit tests for ffs() behavior and const-ness"
* tag 'ffs-const-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
KUnit: ffs: Validate all the __attribute_const__ annotations
sparc: Add __attribute_const__ to ffs()-family implementations
xtensa: Add __attribute_const__ to ffs()-family implementations
s390: Add __attribute_const__ to ffs()-family implementations
parisc: Add __attribute_const__ to ffs()-family implementations
mips: Add __attribute_const__ to ffs()-family implementations
m68k: Add __attribute_const__ to ffs()-family implementations
openrisc: Add __attribute_const__ to ffs()-family implementations
riscv: Add __attribute_const__ to ffs()-family implementations
hexagon: Add __attribute_const__ to ffs()-family implementations
alpha: Add __attribute_const__ to ffs()-family implementations
sh: Add __attribute_const__ to ffs()-family implementations
powerpc: Add __attribute_const__ to ffs()-family implementations
x86: Add __attribute_const__ to ffs()-family implementations
csky: Add __attribute_const__ to ffs()-family implementations
bitops: Add __attribute_const__ to generic ffs()-family implementations
KUnit: Introduce ffs()-family tests
PCI: Test for bit underflow in pcie_set_readrq()
Add support for 2-way interleaved SHA-256 hashing to lib/crypto/, and
make fsverity use it for faster file data verification. This improves
fsverity performance on many x86_64 and arm64 processors.
Later, I plan to make dm-verity use this too.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaNg4/RQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK4fMAP9Xz00JNDfJ+mOVHIYOhAlWFGnug0X1
cvoRf4QXchNlbwD9HTJQQDQXnbsPy3QPrUVfl2FqCW7c6vRlBJijhD6j4wE=
=6dCR
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull interleaved SHA-256 hashing support from Eric Biggers:
"Optimize fsverity with 2-way interleaved hashing
Add support for 2-way interleaved SHA-256 hashing to lib/crypto/, and
make fsverity use it for faster file data verification. This improves
fsverity performance on many x86_64 and arm64 processors.
Later, I plan to make dm-verity use this too"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: Use 2-way interleaved SHA-256 hashing when supported
fsverity: Remove inode parameter from fsverity_hash_block()
lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()
lib/crypto: x86/sha256: Add support for 2-way interleaved hashing
lib/crypto: arm64/sha256: Add support for 2-way interleaved hashing
lib/crypto: sha256: Add support for 2-way interleaved hashing
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still using
MD5 for legacy use cases. As long as that remains the case, it's
helpful to clean it up in the same way as I've been doing for other
algorithms. Later, I plan to convert most of these users of MD5 to use
the new MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code. Consolidate these into one module per algorithm,
and centralize the configuration and build process. This is the same
reorganization that has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
Due to interdependencies between test and non-test code, both are
included in this pull request. The broken-down diffstat is as follows:
Tests: 735 insertions(+), 1917 deletions(-)
RISC-V Poly1305: 877 insertions(+), 1 deletion(-)
Other: 1777 insertions(+), 3117 deletions(-)
Besides the new RISC-V code which is an addition, there are quite a
few simplifications due to the improved code organization for multiple
algorithms, the removal of the unused crypto_kpp API for Curve25519
and redundant tests, and the redesign of the BLAKE2s test.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaNgwUhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK3EnAP96hB1wD12DvIovGCmWnnlbzOt+CoK2
B5CW74eYEZiSbwD7BiKPDqvSmLzEBtbKmOSwRvxKuQ2uGGef3USFKYVCiw0=
=DY5R
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
Update crc_kunit to test the CRC functions in softirq and hardirq
contexts, similar to what the lib/crypto/ KUnit tests do. Move the
helper function needed to do this into a common header.
This is useful mainly to test fallback code paths for when
FPU/SIMD/vector registers are unusable.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaNgevxQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK42cAP4qrRd2p4lLm4lntiL9igO0AVUl7Lsj
2hhYcVWNj24wwgD/bBb5aCCKfreOQbjMldYjL+UlRiYqQAsstlfcwY7EegM=
=aEsr
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Update crc_kunit to test the CRC functions in softirq and hardirq
contexts, similar to what the lib/crypto/ KUnit tests do. Move the
helper function needed to do this into a common header.
This is useful mainly to test fallback code paths for when
FPU/SIMD/vector registers are unusable"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
Documentation/staging: Fix typo and incorrect citation in crc32.rst
lib/crc: Drop inline from all *_mod_init_arch() functions
lib/crc: Use underlying functions instead of crypto_simd_usable()
lib/crc: crc_kunit: Test CRC computation in interrupt contexts
kunit, lib/crypto: Move run_irq_test() to common header
Use the generic interface which should result in less bulk allocations
during a forking.
A part of this is to abstract the freeing of the sheaf or maple state
allocations into its own function so mas_destroy() and the tree
duplication code can use the same functionality to return any unused
resources.
[andriy.shevchenko@linux.intel.com: remove unused mt_alloc_bulk()]
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The fast path through a write will require replacing a single node in
the tree. Using a sheaf (32 nodes) is too heavy for the fast path, so
special case the node store operation by just allocating one node in the
maple state.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use prefilled sheaves instead of bulk allocations. This should speed up
the allocations and the return path of unused allocations.
Remove the push and pop of nodes from the maple state as this is now
handled by the slab layer with sheaves.
Testing has been removed as necessary since the features of the tree
have been reduced.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
kfree() is a little shorter and works with kmem_cache_alloc'd pointers
too. Also lets us remove one more helper.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
kfree_rcu is an optimized version of call_rcu + kfree. It used to not be
possible to call it on non-kmalloc objects, but this restriction was
lifted ever since SLOB was dropped from the kernel, and since commit
6c6c47b063 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()").
Thus, replace call_rcu + mt_free_rcu with kfree_rcu.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Setup the maple_node_cache with percpu sheaves of size 32 to hopefully
improve its performance. Note this will not immediately take advantage
of sheaf batching of kfree_rcu() operations due to the maple tree using
call_rcu with custom callbacks. The followup changes to maple tree will
change that and also make use of the prefilled sheaves functionality.
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Bulk insert mode was added to facilitate forking faster, but forking now
uses __mt_dup() to duplicate the tree.
The addition of sheaves has made the bulk allocations difficult to
maintain - since the expected entries would preallocate into the maple
state. A big part of the maple state node allocation was the ability to
push nodes back onto the state for later use, which was essential to the
bulk insert algorithm.
Remove mas_expected_entries() and mas_destroy_rebalance() functions as
well as the MA_STATE_BULK and MA_STATE_REBALANCE maple state flags since
there are no users anymore. Drop the associated testing as well.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
No functional changes.
Link: https://lkml.kernel.org/r/20250804125657.482109-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Make sure to drop the reference taken when looking up the genpool platform
device in of_gen_pool_get() before returning the pool.
Note that holding a reference to a device does typically not prevent its
devres managed resources from being released so there is no point in
keeping the reference.
Link: https://lkml.kernel.org/r/20250924080207.18006-1-johan@kernel.org
Fixes: 9375db07ad ("genalloc: add devres support, allow to find a managed pool by device")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's really no need for this since it's 0 or 1 when
CONFIG_PANIC_ON_OOPS is disabled/enabled, so just use IS_ENABLED()
instead. The extra symbol goes back to the original code adding it in
commit 2a01bb3885 ("panic: Make panic_on_oops configurable").
Link: https://lkml.kernel.org/r/20250924094303.18521-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).
Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Switch 'compressed_formats[]' to the more modern and flexible designated
initializers. This improves readability and allows struct fields to be
reordered. Also use a more concise sentinel marker.
Remove the curly braces around the for loop while we're at it.
No functional changes intended.
Link: https://lkml.kernel.org/r/20250910232350.1308206-2-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While rare, memory allocation profiling can contain inaccurate counters if
slab object extension vector allocation fails. That allocation might
succeed later but prior to that, slab allocations that would have used
that object extension vector will not be accounted for. To indicate
incorrect counters, "accurate:no" marker is appended to the call site line
in the /proc/allocinfo output. Bump up /proc/allocinfo version to reflect
the change in the file format and update documentation.
Example output with invalid counters:
allocinfo - version: 2.0
0 0 arch/x86/kernel/kdebugfs.c:105 func:create_setup_data_nodes
0 0 arch/x86/kernel/alternative.c:2090 func:alternatives_smp_module_add
0 0 arch/x86/kernel/alternative.c:127 func:__its_alloc accurate:no
0 0 arch/x86/kernel/fpu/regset.c:160 func:xstateregs_set
0 0 arch/x86/kernel/fpu/xstate.c:1590 func:fpstate_realloc
0 0 arch/x86/kernel/cpu/aperfmperf.c:379 func:arch_enable_hybrid_capacity_scale
0 0 arch/x86/kernel/cpu/amd_cache_disable.c:258 func:init_amd_l3_attrs
49152 48 arch/x86/kernel/cpu/mce/core.c:2709 func:mce_device_create accurate:no
32768 1 arch/x86/kernel/cpu/mce/genpool.c:132 func:mce_gen_pool_create
0 0 arch/x86/kernel/cpu/mce/amd.c:1341 func:mce_threshold_create_device
[surenb@google.com: document new "accurate:no" marker]
Fixes: 39d117e04d15 ("alloc_tag: mark inaccurate allocation counters in /proc/allocinfo output")
[akpm@linux-foundation.org: simplification per Usama, reflow text]
[akpm@linux-foundation.org: add newline to prevent docs warning, per Randy]
Link: https://lkml.kernel.org/r/20250915230224.4115531-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Memory profiling can be shut down due to reasons like a failure during
initialization. When this happens, the user should not be able to
re-enable it. Current sysctrl interface does not handle this properly and
will allow re-enabling memory profiling. Fix this by checking for this
condition during sysctrl write operation.
Link: https://lkml.kernel.org/r/20250915212756.3998938-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Cc: David Wang <00107082@163.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Minor fixes for memory allocation profiling", v2.
Over the last couple months I gathered a few reports of minor issues in
memory allocation profiling which are addressed in this patchset.
This patch (of 2):
When bulk-freeing an array of pages use release_pages() instead of freeing
them page-by-page.
Link: https://lkml.kernel.org/r/20250915212756.3998938-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250915212756.3998938-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Usama Arif <usamaarif642@gmail.com>
Cc: David Wang <00107082@163.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kasan: unify kasan_enabled() and remove arch-specific
implementations", v6.
This patch series addresses the fragmentation in KASAN initialization
across architectures by introducing a unified approach that eliminates
duplicate static keys and arch-specific kasan_arch_is_ready()
implementations.
The core issue is that different architectures have inconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions
or always-on behavior
This patch (of 2):
Introduce CONFIG_ARCH_DEFER_KASAN to identify architectures [1] that need
to defer KASAN initialization until shadow memory is properly set up, and
unify the static key infrastructure across all KASAN modes.
[1] PowerPC, UML, LoongArch selects ARCH_DEFER_KASAN.
The core issue is that different architectures haveinconsistent approaches
to KASAN readiness tracking:
- PowerPC, LoongArch, and UML arch, each implement own
kasan_arch_is_ready()
- Only HW_TAGS mode had a unified static key (kasan_flag_enabled)
- Generic and SW_TAGS modes relied on arch-specific solutions or always-on
behavior
This patch addresses the fragmentation in KASAN initialization across
architectures by introducing a unified approach that eliminates duplicate
static keys and arch-specific kasan_arch_is_ready() implementations.
Let's replace kasan_arch_is_ready() with existing kasan_enabled() check,
which examines the static key being enabled if arch selects
ARCH_DEFER_KASAN or has HW_TAGS mode support. For other arch,
kasan_enabled() checks the enablement during compile time.
Now KASAN users can use a single kasan_enabled() check everywhere.
Link: https://lkml.kernel.org/r/20250810125746.1105476-1-snovitoll@gmail.com
Link: https://lkml.kernel.org/r/20250810125746.1105476-2-snovitoll@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217049
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> #powerpc
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Marco Elver <elver@google.com>
Cc: Qing Zhang <zhangqing@loongson.cn>
Cc: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjHMcoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5bwH/23w8iGB4hf7L/7Z
e7blX42Pe9EXA1uK62iWmwEjDvBuJ7TmVfXH09qYJ56fj6/rJEdpQwtBMd4ypL81
QA/7lq5UEl0apPzMN86J8EHCzmjNzv7o+UtEd4C/hPFEZHZJa5Hqj9CBglSwSCEn
fTkLk7Gl6s8SfzBQ/rXX6/ZChAB/RleVWabDlIQMDz++/+9DZ0aqphj+5bYSqysL
ROQOaj4LOICuLfrup9J61hKNBoF7Dv3sO20vc+Iic0XHRPZ6/lKCnHgCUsqVIOOQ
L4kDT7XKQg+n3ttjrMe84/8iHZdWtf8VMWrtniPT8e1YGYuMpavVplgIcFoFCoNm
Qa7NPDs=
=rZeT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaM3AYQAKCRAdayaRccAa
lkrsAQCfR0LymE8Hq+Vfk65DK4qZxigaXGTfg5n3xlPhTAh/iQEA02N0/ReHOOdH
nQde8709saIFE5axIMFvdWzbFPDtWwE=
=eIkf
-----END PGP SIGNATURE-----
Merge 6.17-rc6 into kbuild-next
Commit bd7c231212 ("pinctrl: meson: Fix typo in device table macro")
is needed in kbuild-next to avoid a build error with a future change.
While at it, address the conflict between commit 41f9049cff ("riscv:
Only allow LTO with CMODEL_MEDANY") and commit 6578a1ff6a ("riscv:
Remove version check for LTO_CLANG selects"), as reported by Stephen
Rothwell [1].
Link: https://lore.kernel.org/20250908134913.68778b7b@canb.auug.org.au/ [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Add an implementation of sha256_finup_2x_arch() for x86_64. It
interleaves the computation of two SHA-256 hashes using the x86 SHA-NI
instructions. dm-verity and fs-verity will take advantage of this for
greatly improved performance on capable CPUs.
This increases the throughput of SHA-256 hashing 4096-byte messages by
the following amounts on the following CPUs:
Intel Ice Lake (server): 4%
Intel Sapphire Rapids: 38%
Intel Emerald Rapids: 38%
AMD Zen 1 (Threadripper 1950X): 84%
AMD Zen 4 (EPYC 9B14): 98%
AMD Zen 5 (Ryzen 9 9950X): 64%
For now, this seems to benefit AMD more than Intel. This seems to be
because current AMD CPUs support concurrent execution of the SHA-NI
instructions, but unfortunately current Intel CPUs don't, except for the
sha256msg2 instruction. Hopefully future Intel CPUs will support SHA-NI
on more execution ports. Zen 1 supports 2 concurrent sha256rnds2, and
Zen 4 supports 4 concurrent sha256rnds2, which suggests that even better
performance may be achievable on Zen 4 by interleaving more than two
hashes. However, doing so poses a number of trade-offs, and furthermore
Zen 5 goes back to supporting "only" 2 concurrent sha256rnds2.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250915160819.140019-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add an implementation of sha256_finup_2x_arch() for arm64. It
interleaves the computation of two SHA-256 hashes using the ARMv8
SHA-256 instructions. dm-verity and fs-verity will take advantage of
this for greatly improved performance on capable CPUs.
This increases the throughput of SHA-256 hashing 4096-byte messages by
the following amounts on the following CPUs:
ARM Cortex-X1: 70%
ARM Cortex-X3: 68%
ARM Cortex-A76: 65%
ARM Cortex-A715: 43%
ARM Cortex-A510: 25%
ARM Cortex-A55: 8%
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250915160819.140019-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Many arm64 and x86_64 CPUs can compute two SHA-256 hashes in nearly the
same speed as one, if the instructions are interleaved. This is because
SHA-256 is serialized block-by-block, and two interleaved hashes take
much better advantage of the CPU's instruction-level parallelism.
Meanwhile, a very common use case for SHA-256 hashing in the Linux
kernel is dm-verity and fs-verity. Both use a Merkle tree that has a
fixed block size, usually 4096 bytes with an empty or 32-byte salt
prepended. Usually, many blocks need to be hashed at a time. This is
an ideal scenario for 2-way interleaved hashing.
To enable this optimization, add a new function sha256_finup_2x() to the
SHA-256 library API. It computes the hash of two equal-length messages,
starting from a common initial context.
For now it always falls back to sequential processing. Later patches
will wire up arm64 and x86_64 optimized implementations.
Note that the interleaving factor could in principle be higher than 2x.
However, that runs into many practical difficulties and CPU throughput
limitations. Thus, both the implementations I'm adding are 2x. In the
interest of using the simplest solution, the API matches that.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250915160819.140019-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since wp$$==wq$$, it doesn't need to load the same data twice, use move
instruction to replace one of the loads to let the program run faster.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250718072711.3865118-3-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
These two C files don't reference things defined in simd.h or types.h
so remove these redundant #inclusions.
Fixes: 6093faaf95 ("raid6: Add RISC-V SIMD syndrome and recovery calculations")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250718072711.3865118-2-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Various KUnit tests require PCI infrastructure to work. All normal
platforms enable PCI by default, but UML does not. Enabling PCI from
.kunitconfig files is problematic as it would not be portable. So in
commit 6fc3a8636a ("kunit: tool: Enable virtio/PCI by default on UML")
PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However
CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of
CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in
virtio_pcidev_init(). However there is no one correct value for
UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default.
This warning is confusing when debugging test failures.
On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not
used at all, given that it is completely non-functional as indicated by
the WARN() in question. Instead it is only used as a way to enable
CONFIG_UML_PCI which itself is not directly configurable.
Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom
configuration option which enables CONFIG_UML_PCI without triggering
warnings or building dead code.
Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously btree_merge() called btree_last() only to test existence, then
performed an extra btree_lookup() to fetch the value. This patch changes
it to directly use the value returned by btree_last(), avoiding redundant
lookups and simplifying the merge loop.
Link: https://lkml.kernel.org/r/20250826161741.686704-1-409411716@gms.tku.edu.tw
Signed-off-by: Guan-Chun Wu <409411716@gms.tku.edu.tw>
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The helper this_cpu_in_panic() duplicated logic already provided by
panic_on_this_cpu().
Remove this_cpu_in_panic() and switch all users to panic_on_this_cpu().
This simplifies the code and avoids having two helpers for the same check.
Link: https://lkml.kernel.org/r/20250825022947.1596226-8-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kees Cook <kees@kernel.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Max Kellermann <max.kellermann@ionos.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: oushixiong <oushixiong@kylinos.cn>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yunhui Cui <cuiyunhui@bytedance.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Generalization of panic_print's dump function [1] has been merged, and
this patchset is to address some remaining issues, like adding note of the
obsoletion of 'panic_print' cmdline parameter, refining the kernel
document for panic_print, and hardening some string management.
This patch (of 4):
It is a normal case that bitmask parameter is 0, so pre-initialize the
names[] to null string to cover this case.
Also remove the superfluous "+1" in names[sizeof(sys_info_avail) + 1],
which is needed for 'strlen()', but not for 'sizeof()'.
Link: https://lkml.kernel.org/r/20250825025701.81921-1-feng.tang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20250825025701.81921-2-feng.tang@linux.alibaba.com
Link: Link: https://lkml.kernel.org/r/20250703021004.42328-1-feng.tang@linux.alibaba.com [1]
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Askar Safin <safinaskar@zohomail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the ternary (enable ? "on" : "off") with the str_on_off() helper
from string_choices.h. This improves readability by replacing the
three-operand ternary with a single function call, ensures consistent
string output, and allows potential string deduplication by the linker,
resulting in a slightly smaller binary.
Link: https://lkml.kernel.org/r/20250814093827.237980-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace ternary (condition ? "true" : "false") expressions with the
str_true_false() helper from string_choices.h. This improves readability
by replacing the three-operand ternary with a single function call,
ensures consistent string output, and allows potential string
deduplication by the linker, resulting in a slightly smaller binary.
Link: https://lkml.kernel.org/r/20250814095033.244034-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kzalloc() has already been initialized to full 0 space, there is no need
to use memset() to initialize again.
Link: https://lkml.kernel.org/r/20250811082739.378284-1-liaoyuanhong@vivo.com
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
No functional changes.
Link: https://lkml.kernel.org/r/20250805023031.331718-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MAPLE_PARENT_RANGE32 should be 0x02 as a 32 bit node is indicated by the
bit pattern 0b010 which is the hex value 0x02. There are no users
currently, so there is no associated bug with this wrong value.
Fix typo Note -> Node and replace x with b to indicate binary values.
Link: https://lkml.kernel.org/r/20250826151344.403286-1-sidhartha.kumar@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The result of integer comparison already evaluates to bool. No need for
explicit conversion.
No functional impact.
Link: https://lkml.kernel.org/r/20250819070457.486348-1-zhao.xichao@vivo.com
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* Update kho_test_save() so that folios array won't be freed when
returning from the function and the fdt will be freed on error
* Reset state->nr_folios to 0 in kho_test_generate_data() on error
* Simplify allocation of folios info in fdt.
Link: https://lkml.kernel.org/r/20250811082510.4154080-3-rppt@kernel.org
Fixes: b753522bed ("kho: add test for kexec handover")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Pratyush Yadav <pratyush@kernel.org>
Closes: https://lore.kernel.org/all/mafs0zfcjcepf.fsf@kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
No functional changes.
Link: https://lkml.kernel.org/r/20250804130018.484321-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reimplement k[v]realloc_node() to be able to set node and alignment should
a user need to do so. In order to do that while retaining the maximal
backward compatibility, add k[v]realloc_node_align() functions and
redefine the rest of API using these new ones.
While doing that, we also keep the number of _noprof variants to a
minimum, which implies some changes to the existing users of older _noprof
functions, that basically being bcachefs.
With that change we also provide the ability for the Rust part of the
kernel to set node and alignment in its K[v]xxx [re]allocations.
Link: https://lkml.kernel.org/r/20250806124147.1724658-1-vitaly.wool@konsulko.se
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.se>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jann Horn <jannh@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to the equivalent helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-4-3ae822e5bfbd@linutronix.de
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute_const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
Validate all the __attibute_const__ annotations were found for all
architectures by reproducing the specific problem encountered in the
original bug report.
Build and run tested with everything I could reach with KUnit:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 ffs
$ ./tools/testing/kunit/kunit.py run --arch=i386 ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm64 --make_options "CROSS_COMPILE=aarch64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm --make_options "CROSS_COMPILE=arm-linux-gnueabi-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc32 ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpcle ffs
$ ./tools/testing/kunit/kunit.py run --arch=m68k ffs
$ ./tools/testing/kunit/kunit.py run --arch=loongarch ffs
$ ./tools/testing/kunit/kunit.py run --arch=s390 --make_options "CROSS_COMPILE=s390x-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv32 --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc64 --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=alpha --make_options "CROSS_COMPILE=alpha-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sh --make_options "CROSS_COMPILE=sh4-linux-gnu-" ffs
Closes: https://github.com/KSPP/linux/issues/364
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-17-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
Add missing __attribute_const__ annotations to generic implementations of
ffs(), __ffs(), fls(), and __fls() functions. These are pure mathematical
functions that always return the same result for the same input with no
side effects, making them eligible for compiler optimization.
Build tested with x86_64 defconfig using GCC 14.2.0, which should validate
the implementations when used by ARM, ARM64, LoongArch, Microblaze,
NIOS2, and SPARC32 architectures.
Link: https://github.com/KSPP/linux/issues/364 [1]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Add KUnit tests for ffs()-family bit scanning functions: ffs(), __ffs(),
fls(), __fls(), fls64(), __ffs64(), and ffz(). The tests validate
mathematical relationships (e.g. ffs(x) == __ffs(x) + 1), and test zero
values, power-of-2 patterns, maximum values, and sparse bit patterns.
Build and run tested with everything I could reach with KUnit:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 ffs
$ ./tools/testing/kunit/kunit.py run --arch=i386 ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm64 --make_options "CROSS_COMPILE=aarch64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm --make_options "CROSS_COMPILE=arm-linux-gnueabihf-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc32 ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpcle ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv32 --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=s390 --make_options "CROSS_COMPILE=s390x-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=m68k ffs
$ ./tools/testing/kunit/kunit.py run --arch=loongarch ffs
$ ./tools/testing/kunit/kunit.py run --arch=mips --make_options "CROSS_COMPILE=mipsel-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc64 --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=alpha --make_options "CROSS_COMPILE=alpha-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sh --make_options "CROSS_COMPILE=sh4-linux-gnu-" ffs
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Now that the Curve25519 library has been disentangled from CRYPTO,
adding CRYPTO_SELFTESTS as a default value of
CRYPTO_LIB_CURVE25519_KUNIT_TEST no longer causes a recursive kconfig
dependency. Do this, which makes this option consistent with the other
crypto KUnit test options in the same file.
Link: https://lore.kernel.org/r/20250906213523.84915-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reorganize the Curve25519 library code:
- Build a single libcurve25519 module, instead of up to three modules:
libcurve25519, libcurve25519-generic, and an arch-specific module.
- Move the arch-specific Curve25519 code from arch/$(SRCARCH)/crypto/ to
lib/crypto/$(SRCARCH)/. Centralize the build rules into
lib/crypto/Makefile and lib/crypto/Kconfig.
- Include the arch-specific code directly in lib/crypto/curve25519.c via
a header, rather than using a separate .c file.
- Eliminate the entanglement with CRYPTO. CRYPTO_LIB_CURVE25519 no
longer selects CRYPTO, and the arch-specific Curve25519 code no longer
depends on CRYPTO.
This brings Curve25519 in line with the latest conventions for
lib/crypto/, used by other algorithms. The exception is that I kept the
generic code in separate translation units for now. (Some of the
function names collide between the x86 and generic Curve25519 code. And
the Curve25519 functions are very long anyway, so inlining doesn't
matter as much for Curve25519 as it does for some other algorithms.)
Link: https://lore.kernel.org/r/20250906213523.84915-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move the Curve25519 test from an ad-hoc self-test to a KUnit test.
Generally keep the same test logic for now, just translated to KUnit.
There's one exception, which is that I dropped the incomplete test of
curve25519_generic(). The approach I'm taking to cover the different
implementations with the KUnit tests is to just rely on booting kernels
in QEMU with different '-cpu' options, rather than try to make the tests
(incompletely) test multiple implementations on one CPU. This way, both
the test and the library API are simpler.
This commit makes the file lib/crypto/curve25519.c no longer needed, as
its only purpose was to call the self-test. However, keep it for now,
since a later commit will add code to it again.
Temporarily omit the default value of CRYPTO_SELFTESTS that the other
lib/crypto/ KUnit tests have. It would cause a recursive kconfig
dependency, since the Curve25519 code is still entangled with CRYPTO. A
later commit will fix that.
Link: https://lore.kernel.org/r/20250906213523.84915-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
All architectures implementing time-related functionality in the vDSO are
using the generic vDSO library which handles time namespaces properly.
Remove the now unnecessary Kconfig symbol.
Enables the use of time namespaces on architectures, which use the
generic vDSO but did not enable GENERIC_VDSO_TIME_NS, namely MIPS and arm.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-10-d9b65750e49f@linutronix.de
All users of the generic vDSO library also use the generic vDSO datastore.
Remove the now unnecessary Kconfig symbol.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-9-d9b65750e49f@linutronix.de
All calls of these functions are already gated behind CONFIG_TIME_NS. The
compiler will already optimize them away if time namespaces are disabled.
Drop the unnecessary stubs.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-4-d9b65750e49f@linutronix.de
When the generic vDSO does not provide time functions, as for example on
riscv32, then the time data store is not necessary.
Avoid allocating these time data pages when not used.
Fixes: df7fcbefa7 ("vdso: Add generic time data storage")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-1-d9b65750e49f@linutronix.de
Add a KUnit test suite for BLAKE2s. Most of the core test logic is in
the previously-added hash-test-template.h. This commit just adds the
actual KUnit suite, commits the generated test vectors to the tree so
that gen-hash-testvecs.py won't have to be run at build time, and adds a
few BLAKE2s-specific test cases.
This is the replacement for blake2s-selftest, which an earlier commit
removed. Improvements over blake2s-selftest include integration with
KUnit, more comprehensive test cases, and support for benchmarking.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
As was done with the other algorithms, reorganize the BLAKE2s code so
that the generic implementation and the arch-specific "glue" code is
consolidated into a single translation unit, so that the compiler will
inline the functions and automatically decide whether to include the
generic code in the resulting binary or not.
Similarly, also consolidate the build rules into
lib/crypto/{Makefile,Kconfig}. This removes the last uses of
lib/crypto/{arm,x86}/{Makefile,Kconfig}, so remove those too.
Don't keep the !KMSAN dependency. It was needed only for other
algorithms such as ChaCha that initialize memory from assembly code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move blake2s_compress_generic() from blake2s-generic.c to blake2s.c.
For now it's still guarded by CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC, but
this prepares for changing it to a 'static __maybe_unused' function and
just using the compiler to automatically decide its inclusion.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
When support for a crypto algorithm is enabled, the arch-optimized
implementation of that algorithm should be enabled too. We've learned
this the hard way many times over the years: people regularly forget to
enable the arch-optimized implementations of the crypto algorithms,
resulting in significant performance being left on the table.
Currently, BLAKE2s support is always enabled ('obj-y'), since random.c
uses it. Therefore, the arch-optimized BLAKE2s code, which exists for
ARM and x86_64, should be always enabled too. Let's do that.
Note that the effect on kernel image size is very small and should not
be a concern. On ARM, enabling CRYPTO_BLAKE2S_ARM actually *shrinks*
the kernel size by about 1200 bytes, since the ARM-optimized
blake2s_compress() completely replaces the generic blake2s_compress().
On x86_64, enabling CRYPTO_BLAKE2S_X86 increases the kernel size by
about 1400 bytes, as the generic blake2s_compress() is still included as
a fallback; however, for context, that is only about a quarter the size
of the generic blake2s_compress(). The x86_64 optimized BLAKE2s code
uses much less icache at runtime than the generic code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Save 480 bytes of .rodata by replacing the .long constants with .bytes,
and using the vpmovzxbd instruction to expand them.
Also update the code to do the loads before incrementing %rax rather
than after. This avoids the need for the first load to use an offset.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Consolidate the ChaCha code into a single module (excluding
chacha-block-generic.c which remains always built-in for random.c),
similar to various other algorithms:
- Each arch now provides a header file lib/crypto/$(SRCARCH)/chacha.h,
replacing lib/crypto/$(SRCARCH)/chacha*.c. The header defines
chacha_crypt_arch() and hchacha_block_arch(). It is included by
lib/crypto/chacha.c, and thus the code gets built into the single
libchacha module, with improved inlining in some cases.
- Whether arch-optimized ChaCha is buildable is now controlled centrally
by lib/crypto/Kconfig instead of by lib/crypto/$(SRCARCH)/Kconfig.
The conditions for enabling it remain the same as before, and it
remains enabled by default.
- Any additional arch-specific translation units for the optimized
ChaCha code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
This removes the last use for the Makefile and Kconfig files in the
arm64, mips, powerpc, riscv, and s390 subdirectories of lib/crypto/. So
also remove those files and the references to them.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename libchacha.c to chacha.c to make the naming consistent with other
algorithms and allow additional source files to be added to the
libchacha module. This file currently contains chacha_crypt_generic(),
but it will soon be updated to contain chacha_crypt().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename chacha.c to chacha-block-generic.c to free up the name chacha.c
for the high-level API entry points (chacha_crypt() and
hchacha_block()), similar to the other algorithms.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305
implementation for riscv authored by Andy Polyakov. The file
'poly1305-riscv.pl' is taken straight from
https://github.com/dot-asm/cryptogams commit
5e3fba73576244708a752fa61a8e93e587f271bb. This patch was tested on
SpacemiT X60, with 2~2.5x improvement over generic implementation.
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Signed-off-by: Zhihang Shao <zhihang.shao.iscas@gmail.com>
[EB: ported to lib/crypto/riscv/]
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Consolidate the Poly1305 code into a single module, similar to various
other algorithms (SHA-1, SHA-256, SHA-512, etc.):
- Each arch now provides a header file lib/crypto/$(SRCARCH)/poly1305.h,
replacing lib/crypto/$(SRCARCH)/poly1305*.c. The header defines
poly1305_block_init(), poly1305_blocks(), poly1305_emit(), and
optionally poly1305_mod_init_arch(). It is included by
lib/crypto/poly1305.c, and thus the code gets built into the single
libpoly1305 module, with improved inlining in some cases.
- Whether arch-optimized Poly1305 is buildable is now controlled
centrally by lib/crypto/Kconfig instead of by
lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain
the same as before, and it remains enabled by default. (The PPC64 one
remains unconditionally disabled due to 'depends on BROKEN'.)
- Any additional arch-specific translation units for the optimized
Poly1305 code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
A special consideration is needed because the Adiantum code uses the
poly1305_core_*() functions directly. For now, just carry forward that
approach. This means retaining the CRYPTO_LIB_POLY1305_GENERIC kconfig
symbol, and keeping the poly1305_core_*() functions in separate
translation units. So it's not quite as streamlined I've done with the
other hash functions, but we still get a single libpoly1305 module.
Note: to see the diff from the arm, arm64, and x86 .c files to the new
.h files, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, two KMSAN checks can be cleaned up.
CONFIG_HAVE_KMSAN_COMPILER will always be true when using clang so
remove the cc-option test and use a simple check for CONFIG_CC_IS_CLANG.
CONFIG_HAVE_KMSAN_PARAM_RETVAL will always be true so it can be removed
outright.
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-12-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, __no_kcsan will always ensure that the thread
sanitizer functions are not generated, so remove the check for tsan
functions in is_profiling_func() and the always true depends and
unnecessary select lines in KCSAN_WEAK_MEMORY.
Acked-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infraded.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-11-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, the CLANG_VERSION check for older than 14.0.0
is always false, so remove it.
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-10-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Drop 'inline' from all the *_mod_init_arch() functions so that the
compiler will warn about any bugs where they are unused due to not being
wired up properly. (There are no such bugs currently, so this just
establishes a more robust convention for the future. Of course, these
functions also tend to get inlined anyway, regardless of the keyword.)
Link: https://lore.kernel.org/r/20250816020457.432040-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the MD5 library functions, including the
corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suite, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Link: https://lore.kernel.org/r/20250805222855.10362-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Introduce example_params_test_with_init_dynamic_arr(). This new
KUnit test demonstrates directly assigning a dynamic parameter
array, using the kunit_register_params_array() macro, to a
parameterized test context.
It highlights the use of param_init() and param_exit() for
initialization and exit of a parameterized test, and their
registration to the test case with KUNIT_CASE_PARAM_WITH_INIT().
Link: https://lore.kernel.org/r/20250826091341.1427123-7-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add example_params_test_with_init() to illustrate how to manage
shared resources across a parameterized KUnit test. This example
showcases the use of the new param_init() function and its registration
to a test using the KUNIT_CASE_PARAM_WITH_INIT() macro.
Additionally, the test demonstrates how to directly pass a parameter array
to the parameterized test context via kunit_register_params_array()
and leveraging the Resource API for shared resource management.
Link: https://lore.kernel.org/r/20250826091341.1427123-6-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit parameterized tests currently support two primary methods f
or getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
This patch addresses these limitations by adding a new `params_array`
field to `struct kunit`, of the type `kunit_params`. The
`struct kunit_params` is designed to store the parameter array itself,
along with essential metadata including the parameter count, parameter
size, and a get_description() function for providing custom descriptions
for individual parameters.
The `params_array` field can be populated by calling the new
kunit_register_params_array() macro from within a param_init() function.
This will register the array as part of the parameterized test context.
The user will then need to pass kunit_array_gen_params() to the
KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not
providing their own. kunit_array_gen_params() is a KUnit helper that will
use the registered array to generate parameters.
The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to
the parameterized test context for consistency as well as for higher
availability of the parameter count that will be used for outputting a KTAP
test plan for a parameterized test.
This modification provides greater flexibility to the KUnit framework,
allowing testers to easily register and utilize both dynamic and static
parameter arrays.
Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Only output the test plan if using kunit_array_gen_params --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To enable more complex parameterized testing scenarios, the
generate_params() function needs additional context beyond just
the previously generated parameter. This patch modifies the
generate_params() function signature to include an extra
`struct kunit *test` argument, giving test users access to the
parameterized test context when generating parameters.
The `struct kunit *test` argument was added as the first parameter
to the function signature as it aligns with the convention of other
KUnit functions that accept `struct kunit *test` first. This also
mirrors the "this" or "self" reference found in object-oriented
programming languages.
This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c
and nthreads_gen_params() in kcsan_test.c to reflect this signature
change.
Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Catch some additional gen_params signatures in drm/xe/tests --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add (*param_init) and (*param_exit) function pointers to
`struct kunit_case`. Users will be able to set them via the new
KUNIT_CASE_PARAM_WITH_INIT() macro.
param_init/exit will be invoked by kunit_run_tests() once before and once
after the parameterized test, respectively. They will receive the
`struct kunit` that holds the parameterized test context; facilitating
init and exit for shared state.
This patch also sets param_init/exit to None in rust/kernel/kunit.rs.
Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit parameterized tests lack a mechanism to share
resources across parameter runs because the same `struct kunit`
instance is cleaned up and reused for each run.
This patch introduces parameterized test context, enabling test
users to share resources between parameter runs. It also allows
setting up resources that need to be available for all parameter
runs only once, which is helpful in cases where setup is expensive.
To establish a parameterized test context, this patch adds a
parent pointer field to `struct kunit`. This allows resources added
to the parent `struct kunit` to be shared and accessible across all
parameter runs.
In kunit_run_tests(), the default `struct kunit` created is now
designated to act as the parameterized test context whenever a test
is parameterized.
Subsequently, a new `struct kunit` is made for each parameter run, and
its parent pointer is set to the `struct kunit` that holds the
parameterized test context.
Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Instead of exposing the sparc-optimized MD5 code via sparc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
sparc-optimized, and it fixes the longstanding issue where the
sparc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Note: to see the diff from arch/sparc/crypto/md5_glue.c to
lib/crypto/sparc/md5.h, view this commit with 'git show -M10'.
Link: https://lore.kernel.org/r/20250805222855.10362-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the powerpc-optimized MD5 code via powerpc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
powerpc-optimized, and it fixes the longstanding issue where the
powerpc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Link: https://lore.kernel.org/r/20250805222855.10362-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the mips-optimized MD5 code via mips-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
mips-optimized, and it fixes the longstanding issue where the
mips-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Note: to see the diff from arch/mips/cavium-octeon/crypto/octeon-md5.c
to lib/crypto/mips/md5.h, view this commit with 'git show -M10'.
Link: https://lore.kernel.org/r/20250805222855.10362-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add library functions for MD5, including HMAC support. The MD5
implementation is derived from crypto/md5.c. This closely mirrors the
corresponding SHA-1 and SHA-2 changes.
Like SHA-1 and SHA-2, support for architecture-optimized MD5
implementations is included. I originally proposed dropping those, but
unfortunately there is an AF_ALG user of the PowerPC MD5 code
(https://lore.kernel.org/r/c4191597-341d-4fd7-bc3d-13daf7666c41@csgroup.eu/),
and dropping that code would be viewed as a performance regression. We
don't add new software algorithm implementations purely for AF_ALG, as
escalating to kernel mode merely to do calculations that could be done
in userspace is inefficient and is completely the wrong design. But
since this one already existed, it gets grandfathered in for now. An
objection was also raised to dropping the SPARC64 MD5 code because it
utilizes the CPU's direct support for MD5, although it remains unclear
that anyone is using that. Regardless, we'll keep these around for now.
Note that while MD5 is a legacy algorithm that is vulnerable to
practical collision attacks, it still has various in-kernel users that
implement legacy protocols. Switching to a simple library API, which is
the way the code should have been organized originally, will greatly
simplify their code. For example:
MD5:
drivers/md/dm-crypt.c (for lmk IV generation)
fs/nfsd/nfs4recover.c
fs/ecryptfs/
fs/smb/client/
net/{ipv4,ipv6}/ (for TCP-MD5 signatures)
HMAC-MD5:
fs/smb/client/
fs/smb/server/
(Also net/sctp/ if it continues using HMAC-MD5 for cookie generation.
However, that use case has the flexibility to upgrade to a more modern
algorithm, which I'll be proposing instead.)
As usual, the "md5" and "hmac(md5)" crypto_shash algorithms will also be
reimplemented on top of these library functions. For "hmac(md5)" this
will provide a faster, more streamlined implementation.
Link: https://lore.kernel.org/r/20250805222855.10362-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since sha512_kunit tests the fallback code paths without using
crypto_simd_disabled_for_test, make the SHA-512 code just use the
underlying may_use_simd() and irq_fpu_usable() functions directly
instead of crypto_simd_usable(). This eliminates an unnecessary layer.
Link: https://lore.kernel.org/r/20250731223651.136939-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since sha256_kunit tests the fallback code paths without using
crypto_simd_disabled_for_test, make the SHA-256 code just use the
underlying may_use_simd() and irq_fpu_usable() functions directly
instead of crypto_simd_usable(). This eliminates an unnecessary layer.
While doing this, also add likely() annotations, and fix a minor
inconsistency where the static keys in the sha256.h files were in a
different place than in the corresponding sha1.h and sha512.h files.
Link: https://lore.kernel.org/r/20250731223510.136650-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
__ubsan_handle_divrem_overflow() incorrectly uses the RHS to report.
It always reports the same log: division of -1 by -1. But it should
report division of LHS by -1.
Signed-off-by: Junhui Pei <paradoxskin233@gmail.com>
Fixes: c6d308534a ("UBSAN: run-time undefined behavior sanity checker")
Link: https://lore.kernel.org/r/20250602153841.62935-1-paradoxskin233@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Fix a regression where 'make clean' stopped removing some of the
generated assembly files on arm and arm64.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaKaR/xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK486AP4z3+DbFNj3WHLA/O3uFxgR4eiUW9tl
gVtzslK5j2rxLwEAuOrY0qAhzX2dJ0/KN6y7T1qtOEZoGIZ2j85HDvMh3wU=
=d+ja
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Fix a regression where 'make clean' stopped removing some of the
generated assembly files on arm and arm64"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: ensure generated *.S files are removed on make clean
lib/crypto: sha: Update Kconfig help for SHA1 and SHA256
The NEED_* macros do an implicit goto in case the safety bounds checks
fail. Add the unlikely hints as this is the error case and not a hot
path. The final assembly is slightly shorter and some jumps got
reordered according to the hints.
text data bss dec hex filename
2294 16 0 2310 906 pre/lzo1x_decompress_safe.o
2277 16 0 2293 8f5 post/lzo1x_decompress_safe.o
text data bss dec hex filename
3444 48 0 3492 da4 pre/lzo1x_compress_safe.o
3372 48 0 3420 d5c post/lzo1x_compress_safe.o
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop 'inline' from all the *_mod_init_arch() functions so that the
compiler will warn about any bugs where they are unused due to not being
wired up properly. (There are no such bugs currently, so this just
establishes a more robust convention for the future. Of course, these
functions also tend to get inlined anyway, regardless of the keyword.)
Link: https://lore.kernel.org/r/20250816020240.431545-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
For kbuild to properly clean up these build artifacts in the subdirectory,
even after CONFIG_KUNIT changed do disabled, the directory needs to be
processed always.
Pushing the special logic for hook.o into the kunit Makefile also makes the
logic easier to understand.
Link: https://lore.kernel.org/r/20250813-kunit-always-descend-v1-1-7bbd387ff13b@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
make clean does not check the kernel config when removing files. As
such, additions to clean-files under CONFIG_ARM or CONFIG_ARM64 are not
evaluated. For example, when building on arm64, this means that
lib/crypto/arm64/sha{256,512}-core.S are left over after make clean.
Set clean-files unconditionally to ensure that make clean removes these
files.
Fixes: e96cb9507f ("lib/crypto: sha256: Consolidate into single module")
Fixes: 24c91b62ac ("lib/crypto: arm/sha512: Migrate optimized SHA-512 code to library")
Fixes: 60e3f1e9b7 ("lib/crypto: arm64/sha512: Migrate optimized SHA-512 code to library")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Link: https://lore.kernel.org/r/20250814-crypto_clean-v2-1-659a2dc86302@columbia.edu
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- eth: hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth: hibmcge: fix the division by zero issue
- eth: microchip: fix KSZ8863 reset problem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ydk1
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
As Kees points out, this is a kernel address leak, and debugging is
not a sufficiently good reason to expose the real kernel address.
Fixes: 65b584f536 ("ref_tracker: automatically register a file in debugfs for a ref_tracker_dir")
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/netdev/202507301603.62E553F93@keescook/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since crc_kunit now tests the fallback code paths without using
crypto_simd_disabled_for_test, make the CRC code just use the underlying
may_use_simd() and irq_fpu_usable() functions directly instead of
crypto_simd_usable(). This eliminates an unnecessary layer.
Take the opportunity to add likely() and unlikely() annotations as well.
Link: https://lore.kernel.org/r/20250811182631.376302-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Test that if CRCs are computed in task, softirq, and hardirq context
concurrently, then all results are as expected. Implement this using
kunit_run_irq_test() which is also used by the lib/crypto/ tests.
As with the corresponding lib/crypto/ tests, the purpose of this is to
test fallback code paths and to exercise edge cases in the
architecture's support for in-kernel FPU/SIMD/vector.
Remove the code from crc_test() that sometimes disabled interrupts, as
that was just an incomplete attempt to achieve similar test coverage.
Link: https://lore.kernel.org/r/20250811182631.376302-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EQ7g
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Because it's only used in sbitmap.c
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250807032413.1469456-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
if (index == sb->map_nr - 1)
return sb->depth - (index << sb->shift);
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250807032413.1469456-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Resolve conflicts with this commit that was developed in parallel
during the merge window:
8c8efa93db ("x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust")
Conflicts:
arch/riscv/include/asm/bug.h
arch/x86/include/asm/bug.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmiQpykACgkQUqAMR0iA
lPJcrg/9Hez6+zO7LECCn5VkuK5oJWR5CyCfwx14ki8UF38djQGU2frckI5837rE
MnVoEBexZunK5SXy4MAy7bTCitzR+lMqNtP5uq9J2ovlSPtNlfuJRDr7uGQLDtSS
M5KZ1qsZnhgwLYeNhfVVToHgp+OwIQb2GcgYmYc8k03fUI1NQpdxIM46DzoTj+06
x6qgrNsmmJbm8E73VWBByJAEFoq9ugjny8Rt+tYMi/CmhgZpp0ZyF1r5dYfYX/KS
VS8UQY//aZOFhNsQUAXwP7Ym00CYRgTg7Na+MHivYLXmYGH2gF6tWQhX/eEgHKcJ
RTmUbLFx70fdBbjJMxv2k8vyMk2sy6sTfJHPqM/NS/Fb0tSPBXQJG/EexzfoqiBc
wcjgOPkeALIosVdFdTqXxjoIGOP8rqsU4t6Y6WFjJlWK04SBVjxBUofytRdQSxkG
5Sb0rFVGKrKIkXaVkt4byPa1/BDpfNhfKMYPtQ56pv2VNUgzfye4prUAZHE5pLnK
8nixeeMtKDFFCBpn6rG5wZW7k2mK5FrWGZUfdfxdK1gWQ1y0kqGy5wa3lNZLcxlH
l3AtOYoDeWM2DjDVO6WCj8ambEWkbjbGg7tC9TI3F0NvRJSYytTb6npMqb3Gwhcb
U4NgT+Ho0GJ/5BLUye8HMfhvrGoCfRCeptHtEFXAK7pzKyjc0+c=
=Mocd
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add new "hash_pointers=[auto|always|never]" boot parameter to force
the hashing even with "slab_debug" enabled
- Allow to stop CPU, after losing nbcon console ownership during
panic(), even without proper NMI
- Allow to use the printk kthread immediately even for the 1st
registered nbcon
- Compiler warning removal
* tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: nbcon: Allow reacquire during panic
printk: Allow to use the printk kthread immediately even for 1st nbcon
slab: Decouple slab_debug and no_hash_pointers
vsprintf: Use __diag macros to disable '-Wsuggest-attribute=format'
compiler-gcc.h: Introduce __diag_GCC_all
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
to use the module data structures in combination with the already no-op stub
module functions, even when support for modules is disabled in the kernel
configuration. This change follows the kernel's coding style for conditional
compilation and allows kunit code to drop all CONFIG_MODULES ifdefs, which is
also part of the changes. This should allow others part of the kernel to do the
same cleanup.
Note that this had a conflict with sysctl changes [1] but should be fixed now as I
rebased on top.
The remaining changes include a fix for module name length handling which could
potentially lead to the removal of an incorrect module, and various cleanups.
The module name fix and related cleanup has been in linux-next since Thursday
(July 31) while the rest of the changes for a bit more than 3 weeks.
Note that this currently has conflicts in next with kbuild's tree [2].
Link: https://lore.kernel.org/all/20250714175916.774e6d79@canb.auug.org.au/ [1]
Link: https://lore.kernel.org/all/20250801132941.6815d93d@canb.auug.org.au/ [2]
-----BEGIN PGP SIGNATURE-----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=4bGB
-----END PGP SIGNATURE-----
Merge tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"This is a small set of changes for modules, primarily to extend module
users to use the module data structures in combination with the
already no-op stub module functions, even when support for modules is
disabled in the kernel configuration. This change follows the kernel's
coding style for conditional compilation and allows kunit code to drop
all CONFIG_MODULES ifdefs, which is also part of the changes. This
should allow others part of the kernel to do the same cleanup.
The remaining changes include a fix for module name length handling
which could potentially lead to the removal of an incorrect module,
and various cleanups"
* tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Rename MAX_PARAM_PREFIX_LEN to __MODULE_NAME_LEN
tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN
module: Restore the moduleparam prefix length check
module: Remove unnecessary +1 from last_unloaded_module::name size
module: Prevent silent truncation of module name in delete_module(2)
kunit: test: Drop CONFIG_MODULE ifdeffery
module: make structure definitions always visible
module: move 'struct module_use' to internal.h
Testing kexec handover requires a kernel driver that will generate some
data and preserve it with KHO on the first boot and then restore that data
and verify it was preserved properly after kexec.
To facilitate such test, along with the kernel driver responsible for data
generation, preservation and restoration add a script that runs a kernel
in a VM with a minimal /init. The /init enables KHO, loads a kernel image
for kexec and runs kexec reboot. After the boot of the kexeced kernel,
the driver verifies that the data was properly preserved.
[rppt@kernel.org: fix section mismatch]
Link: https://lkml.kernel.org/r/aIiRC8fXiOXKbPM_@kernel.org
Link: https://lkml.kernel.org/r/20250727083733.2590139-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We're hitting the WARN in depot_init_pool() about reaching the stack depot
limit because we have long stacks that don't dedup very well.
Introduce a new start-up parameter to allow users to set the number of
maximum stack depot pools.
Link: https://lkml.kernel.org/r/20250718153928.94229-1-matt@readmodwrite.com
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
xxh32_digest() and xxh32_update() were added in 2017 in the original
xxhash commit, but have remained unused.
Remove them.
Link: https://lkml.kernel.org/r/20250716133245.243363-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Gilbert <linux@treblig.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
The definitions of GENMASK() and GENMASK_ULL() do not depend any more
on __GENMASK() and __GENMASK_ULL(). Duplicate the existing unit tests
so that __GENMASK{,ULL}() are still covered.
Because __GENMASK() and __GENMASK_ULL() do use GENMASK_INPUT_CHECK(),
drop the TEST_GENMASK_FAILURES negative tests.
It would be good to have a small assembly test case for GENMASK*() in
case somebody decides to unify both in the future. However, I lack
expertise in assembly to do so. Instead add a FIXME message to
highlight the absence of the asm unit test.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Linus Torvalds
Eric Biggers
Nathan Chancellor
Carlos Llamas
Mykyta Yatsenko
Matthew Wilcox (Oracle)
Florian Schmaus
Josh Poimboeuf
Mike Rapoport (Microsoft)
Liam R. Howlett
Pedro Falcato
Vlastimil Babka
Qianfeng Rong
Johan Hovold
Johannes Berg
Kees Cook
Thorsten Blum
Burak Emir
Suren Baghdasaryan
Sabyrzhan Tasbolatov
Chunyan Zhang
Thomas Weißschuh
Guan-Chun Wu
Jinchao Wang
Feng Tang
Kuan-Wei Chiu
Xichao Zhao
Liao Yuanhong
Sidhartha Kumar
Vitaly Wool
Keith Busch
Zhihang Shao
Marie Zhussupova
Junhui Pei
David Sterba
Tal Zussman
Jeff Layton
Yu Kuai
Ingo Molnar
Petr Mladek
Matt Fleming
Dr. David Alan Gilbert
Vincent Mailhol