- Use fdinfo to expose the sysfs path of a device represented by a
vfio device file. (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed
to be unused. (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked
for removal. (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces.
(David Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ.
(Nipun Gupta)
- Fix reference leak in hisi_acc. (Miaoqian Lin)
- Use consistent return for unsupported device feature. (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds.
(Zilin Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx
and resolve stalled interrupt on ppc64. (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver. (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci. (Xichao Zhao)
- Grammatical fix in nvgrace-gpu. (Morduan Zang)
- Update Shameer's email address. (Shameer Kolothum)
- Fix document build warning. (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmjbCBcbHGFsZXgud2ls
bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsik80P/2GQQ25ipSDadWAMGE2f
ylA03/rPJ0OoE4H09bvHELcrZEV0LvaaOpaT0xZfxLa/TuiYyY7h+Yi30BgVLZNQ
pvD2RhKWhRheneFllaPCcYwfK80lntnmOHd6ZjKvpddXKEwoksXUq657yWtBqnvK
fjIjLPx/gFpfvAFM3miHPHhPtURi3utTvKKF2U34qWPSYSqlczRqzHx+c0gyqMVQ
iDYlKRbbpDIuTgh1MpL26Ia6xKsOUOKBe9pOh12pbB3Hix8ZWCDIVhPbUIj9uFoB
uTrftguba9SMV1iMtr/aqiwImxEwp9gR3t6b0MRVWlHqx3QKn1/EgNWOI6ybRsfL
FEspW4dPl9ruUTMbZ83fzvpJGihPx/nxoOnpSPd/cCCNLOyXbhSmZWA+3CgBdXME
vu614SEyRqtdJSQY+RfVr0cM9yImWal0PLJeU2+/VII/Sp+kqYEm4mwVzxTwrrjk
vSsLjg8Ch4zv/dNFnDikcHRpkxYmS5NLUeP2Htyfl1BVxHNLCATZWgSKzG3fFzV0
jWP6yG27/dVrVhKXb9X+yrPFE9/2Uq9pUkIdDR/Mfb54GJtSXmJIQVIzgmSQpSlQ
qXCZufVLY38xtLvl+hGpWa/DBBhnItRzkTwL7gkBlzz1L4Ajy4T84QqKLxmyxsIj
bsmaPit0CQI0iOzZ1xMrJlq3
=E6Zs
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Use fdinfo to expose the sysfs path of a device represented by a vfio
device file (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed to
be unused (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked for
removal (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces (David
Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ
(Nipun Gupta)
- Fix reference leak in hisi_acc (Miaoqian Lin)
- Use consistent return for unsupported device feature (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds (Zilin
Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx and
resolve stalled interrupt on ppc64 (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci (Xichao Zhao)
- Grammatical fix in nvgrace-gpu (Morduan Zang)
- Update Shameer's email address (Shameer Kolothum)
- Fix document build warning (Alex Williamson)
* tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio: (48 commits)
vfio/nvgrace-gpu: Add GB300 SKU to the devid table
vfio/pci: Fix INTx handling on legacy non-PCI 2.3 devices
vfio/pds: replace bitmap_free with vfree
vfio: return -ENOTTY for unsupported device feature
hisi_acc_vfio_pci: Fix reference leak in hisi_acc_vfio_debug_init
vfio/platform: Mark reset drivers for removal
vfio/amba: Mark for removal
MAINTAINERS: Add myself as VFIO-platform reviewer
MAINTAINERS: Add myself as VFIO-platform reviewer
docs: proc.rst: Fix VFIO Device title formatting
vfio: selftests: Fix .gitignore for already tracked files
vfio/cdx: update driver to build without CONFIG_GENERIC_MSI_IRQ
cdx: don't select CONFIG_GENERIC_MSI_IRQ
MAINTAINERS: Update Shameer Kolothum's email address
vfio: selftests: Add a script to help with running VFIO selftests
vfio: selftests: Make iommufd the default iommu_mode
vfio: selftests: Add iommufd mode
vfio: selftests: Add iommufd_compat_type1{,v2} modes
vfio: selftests: Add vfio_type1v2_mode
vfio: selftests: Replicate tests across all iommu_modes
...
- Add an EDAC driver for the AMD VersalNET memory controller which
reports hw errors from different IP blocks in the fabric using an
IPC-type transport
- Drop the silly static number of memory controllers in the Intel EDAC
drivers (skx, i10nm) in favor of a flexible array so that former
doesn't need to be increased with every new generation which adds more
memory controllers; along with a proper refactoring
- Add support for two Alder Lake-S SOCs to ie31200_edac
- Add an EDAC driver for ADM Cortex A72 cores, and specifically for
reporting L1 and L2 cache errors
- Last but not least, the usual fixes, cleanups and improvements all
over the subsystem
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmjWYXEACgkQEsHwGGHe
VUqN0g/+KaDOP5caif7/5IJ2fL+9Qv3VvbxucVMS4UgMYBY21V4msfPkuCg8iGes
zEpFUuEFc2NE6XV9i4JNgYNAR+uffOY4rZb67VSr2rQSVeRvBFHb9aMsXBYssV/r
XtCfTdJL/bJ7SLk10aWvBM4quLF9BchdoPctNMt5PuN3dtb1dVFi1TkylXKaocRX
sfu/hOQ0FUbOlYnGTpW+t4TufNcWzC8q9hL4mrbSVHS3XTKk/zQ9PJ8I8f44XqYo
Bn1JXfAErkgo9rqlmjxU90Lg2G+EV+qwDWs61Ox8q3lzbC+9FOd4WIbD3c9TiTT/
Io6tx8PvgFUz43lD+XGoCfd87ZI9CbGoVAEEiFWr+HaqL/XVF5NS5GiBNTyxGGaP
nDzxm1OYQbDEnBfmaWZCMbbd5yCOZ1EZHTgp4VxqJfooU1Ucbct4oPDnERMTNDlv
UUGDh19BAXwcZ9xpy36AIprppZKOBu0WPjXee9sby5cF+KB57Tbrzd+nm/uZRhHj
bTkQTfCcs+EPAksG0snGufy4BlfS6UGqx4HkSZ3ITVJQX4x27razsxTDbKDk50jq
S1cyZlZ5n+mpR0MtC/zNDMB6cxutgAKoqwssVBUiEh9bCaA/tOPqJmoD9Lx2ESDt
0/QcF1ilBRctunguhDbY8EZKye9gM4WWHW5kxE29PtAzepSdTDo=
=4oCR
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for new AMD family 0x1a models to amd64_edac
- Add an EDAC driver for the AMD VersalNET memory controller which
reports hw errors from different IP blocks in the fabric using an
IPC-type transport
- Drop the silly static number of memory controllers in the Intel EDAC
drivers (skx, i10nm) in favor of a flexible array so that former
doesn't need to be increased with every new generation which adds
more memory controllers; along with a proper refactoring
- Add support for two Alder Lake-S SOCs to ie31200_edac
- Add an EDAC driver for ADM Cortex A72 cores, and specifically for
reporting L1 and L2 cache errors
- Last but not least, the usual fixes, cleanups and improvements all
over the subsystem
* tag 'edac_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (23 commits)
EDAC/versalnet: Return the correct error in mc_probe()
EDAC/mc_sysfs: Increase legacy channel support to 16
EDAC/amd64: Add support for AMD family 1Ah-based newer models
EDAC: Add a driver for the AMD Versal NET DDR controller
dt-bindings: memory-controllers: Add support for Versal NET EDAC
RAS: Export log_non_standard_event() to drivers
cdx: Export Symbols for MCDI RPC and Initialization
cdx: Split mcdi.h and reorganize headers
EDAC/skx_common: Use topology_physical_package_id() instead of open coding
EDAC: Fix wrong executable file modes for C source files
EDAC/altera: Use dev_fwnode()
EDAC/skx_common: Remove unused *NUM*_IMC macros
EDAC/i10nm: Reallocate skx_dev list if preconfigured cnt != runtime cnt
EDAC/skx_common: Remove redundant upper bound check for res->imc
EDAC/skx_common: Make skx_dev->imc[] a flexible array
EDAC/skx_common: Swap memory controller index mapping
EDAC/skx_common: Move mc_mapping to be a field inside struct skx_imc
EDAC/{skx_common,skx}: Use configuration data, not global macros
EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller
EDAC/ie31200: Add two more Intel Alder Lake-S SoCs for EDAC support
...
The cdx_mcdi_init(), cdx_mcdi_process_cmd(), and cdx_mcdi_rpc() functions are
needed by the VersalNET EDAC module that interact with the MCDI (Management
Controller Direct Interface) framework. These functions facilitate
communication between different hardware components by enabling command
execution and status management.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
Move bitfield.h from the CDX controller directory to include/linux/cdx to make
them accessible to other drivers.
As part of this refactoring, split mcdi.h into two headers:
- mcdi.h: retains interface-level declarations
- mcdid.h: contains internal definitions and macros
This is in preparation for VersalNET EDAC driver that relies on it.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/20250908115649.22903-1-shubhrajyoti.datta@amd.com
x86 does not use CONFIG_GENERIC_MSI_IRQ, and trying to enable it anyway
results in a build failure:
In file included from include/linux/ssb/ssb.h:10,
from drivers/ssb/pcihost_wrapper.c:18:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
41 | msi_alloc_info_t msiinfo;
| ^~~~~~~
In file included from include/linux/kvm_host.h:19,
from arch/x86/events/intel/core.c:17:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
528 | msi_alloc_info_t alloc_info;
Change the driver to actually build without this symbol and remove the
incorrect 'select' statements.
Fixes: e8b18c1173 ("cdx: Fix missing GENERIC_MSI_IRQ on compile test")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20250826043852.2206008-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In cdx_rpmsg_probe(), strscpy() is incorrectly called with the length of
the source string (excluding the NUL terminator) rather than the size of
the destination buffer. This results in one character less being copied
from 'cdx_rpmsg_id_table[0].name' to 'chinfo.name'.
Use the destination buffer size instead to ensure the name is copied
correctly.
Cc: stable <stable@kernel.org>
Fixes: 2a226927d9 ("cdx: add rpmsg communication channel for CDX")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250806090512.121260-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct driver in platform_driver is zero-ed so there is no need to
assign its 'pm' member to NULL.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20250502-cdx-clean-v3-5-6aaa5b369fc5@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace standard platform_driver_register() boilerplate with
module_platform_driver() to make code smaller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20250502-cdx-clean-v3-4-6aaa5b369fc5@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should be silent on probe success, unless they print some useful
information. Printing "hey I probed" is not useful and kernel already
gives mechanism to investigate that (e.g. sysfs, tracing, initcall
debug).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20250502-cdx-clean-v3-3-6aaa5b369fc5@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no code limited to ARM64 or OF/Devicetree in the CDX bus
driver, so CDX_BUS can be compile tested on all platforms.
CDX_CONTROLLER on the other hand selects REMOTEPROC which depends on
HAS_DMA, so add that dependency for compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20250502-cdx-clean-v3-1-6aaa5b369fc5@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'cdx_mcdi_copy_buffer' has been unused since the original
commit eb96b74019 ("cdx: add MCDI protocol interface for firmware
interaction").
Looking at lkml, it was used in the V1 posting but was removed
somewhere before V6.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20240530233436.224461-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/5d40f57e978bcce003133306712ec96439e93595.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CDX-MSI domain per CDX controller with gic-its domain as
a parent, to support MSI for CDX devices. CDX devices allocate
MSIs from the CDX domain. Also, introduce APIs to alloc and free
IRQs for CDX domain.
In CDX subsystem firmware is a controller for all devices and
their configuration. CDX bus controller sends all the write_msi_msg
commands to firmware running on RPU and the firmware interfaces with
actual devices to pass this information to devices
Since, CDX controller is the only way to communicate with the Firmware
for MSI write info, CDX domain per controller required in contrast to
having a CDX domain per device.
Co-developed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Co-developed-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20240226082816.100872-1-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTSzg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3QCfbZuG8MiglEZUd4slRLUNqcRQ5tQAn1yKpDFo
l3KLkxo1UTLMXbJBWe+b
=gafK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
CDX controller provides subsystem vendor, subsystem device, class and
revision info of the device along with vendor and device ID in native
endian format. CDX Bus system uses this information to bind the cdx
device to the cdx device driver.
Co-developed-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-8-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CDX bus needs to be disabled before updating/writing devices
in the FPGA. Once the devices are written, the bus shall be
rescanned. This change provides sysfs entry to enable/disable the
CDX bus.
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-6-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While scanning for CDX devices, register newly discovered bus as a
cdx device. CDX device attributes are visible based on device type.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-5-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create CDX_BUS and CDX_BUS_CONTROLLER symbol namespace for cdx bus
subsystem. CDX controller modules are required to import symbols from
CDX_BUS_CONTROLLER namespace and other than controller modules to
import from CDX_BUS namespace.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-4-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce cdx_set_master() and cdx_clear_master() APIs to support
enable and disable of bus mastering. Drivers need to use these APIs to
enable/disable DMAs from the CDX devices.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230915045423.31630-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20230717150355.1749845-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RPMsg is used as a transport communication channel. This
change introduces RPMsg driver and integrates it with the
CDX controller.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-7-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CDX controller uses MCDI interface as a protocol to
communicate with the RPU firmware and registers the
detected CDX devices on the CDX bus. It also uses
RPMsg as the communication channel with the Firmware.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-6-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MCDI (Management CPU Driver Interface) is used as a
protocol to communicate with the RPU firmware. It has
pre-defined set of messages for different message exchanges
between APU and RPU.
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Tarak Reddy <tarak.reddy@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-5-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds
Shubhrajyoti Datta
Nipun Gupta
Thorsten Blum
Krzysztof Kozlowski
Peter Zijlstra
Dr. David Alan Gilbert
Uwe Kleine-König
Abhijit Gangurde
Rob Herring