From a812b09a6b599ea80ec1065a9a635724a235843d Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@riscstar.com>
Date: Thu, 13 Nov 2025 15:45:35 -0600
Subject: [PATCH] dt-bindings: pci: spacemit: Introduce PCIe host controller

Add the Devicetree binding for the PCIe Root Complex found on the SpacemiT
K1 SoC.  This Root Complex is derived from the Synopsys Designware PCIe IP.
It supports up to three PCIe ports operating at PCIe link speed up to 5
GT/sec. One of the ports uses a combo PHY, which is typically used to
support a USB3 port.

Signed-off-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Jason Montleon <jmontleo@redhat.com>
Tested-by: Johannes Erdfelt <johannes@erdfelt.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251113214540.2623070-4-elder@riscstar.com
---
 .../bindings/pci/spacemit,k1-pcie-host.yaml   | 157 ++++++++++++++++++
 1 file changed, 157 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml
new file mode 100644
index 000000000000..c4c00b5fcdc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/spacemit,k1-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 PCI Express Host Controller
+
+maintainers:
+  - Alex Elder <elder@riscstar.com>
+
+description: >
+  The SpacemiT K1 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP.  The controller uses the DesignWare built-in MSI interrupt
+  controller, and supports 256 MSIs.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: spacemit,k1-pcie
+
+  reg:
+    items:
+      - description: DesignWare PCIe registers
+      - description: ATU address space
+      - description: PCIe configuration space
+      - description: Link control registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: atu
+      - const: config
+      - const: link
+
+  clocks:
+    items:
+      - description: DWC PCIe Data Bus Interface (DBI) clock
+      - description: DWC PCIe application AXI-bus master interface clock
+      - description: DWC PCIe application AXI-bus slave interface clock
+
+  clock-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+
+  resets:
+    items:
+      - description: DWC PCIe Data Bus Interface (DBI) reset
+      - description: DWC PCIe application AXI-bus master interface reset
+      - description: DWC PCIe application AXI-bus slave interface reset
+
+  reset-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+
+  interrupts:
+    items:
+      - description: Interrupt used for MSIs
+
+  interrupt-names:
+    const: msi
+
+  spacemit,apmu:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      A phandle that refers to the APMU system controller, whose regmap is
+      used in managing resets and link state, along with and offset of its
+      reset control register.
+    items:
+      - items:
+          - description: phandle to APMU system controller
+          - description: register offset
+
+patternProperties:
+  '^pcie@':
+    type: object
+    $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+    properties:
+      phys:
+        maxItems: 1
+
+      vpcie3v3-supply:
+        description:
+          A phandle for 3.3v regulator to use for PCIe
+
+    required:
+      - phys
+      - vpcie3v3-supply
+
+    unevaluatedProperties: false
+
+required:
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - interrupts
+  - interrupt-names
+  - spacemit,apmu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/spacemit,k1-syscon.h>
+    pcie@ca400000 {
+        device_type = "pci";
+        compatible = "spacemit,k1-pcie";
+        reg = <0xca400000 0x00001000>,
+              <0xca700000 0x0001ff24>,
+              <0x9f000000 0x00002000>,
+              <0xc0c20000 0x00001000>;
+        reg-names = "dbi",
+                    "atu",
+                    "config",
+                    "link";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x01000000 0x0 0x00000000 0x9f002000 0x0 0x00100000>,
+                 <0x02000000 0x0 0x90000000 0x90000000 0x0 0x0f000000>;
+        interrupts = <142>;
+        interrupt-names = "msi";
+        clocks = <&syscon_apmu CLK_PCIE1_DBI>,
+                 <&syscon_apmu CLK_PCIE1_MASTER>,
+                 <&syscon_apmu CLK_PCIE1_SLAVE>;
+        clock-names = "dbi",
+                      "mstr",
+                      "slv";
+        resets = <&syscon_apmu RESET_PCIE1_DBI>,
+                 <&syscon_apmu RESET_PCIE1_MASTER>,
+                 <&syscon_apmu RESET_PCIE1_SLAVE>;
+        reset-names = "dbi",
+                      "mstr",
+                      "slv";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pcie1_3_cfg>;
+        spacemit,apmu = <&syscon_apmu 0x3d4>;
+
+        pcie@0 {
+          device_type = "pci";
+          compatible = "pciclass,0604";
+          reg = <0x0 0x0 0x0 0x0 0x0>;
+          bus-range = <0x01 0xff>;
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+          phys = <&pcie1_phy>;
+          vpcie3v3-supply = <&pcie_vcc_3v3>;
+        };
+    };