diff --git a/Documentation/netlink/specs/wireguard.yaml b/Documentation/netlink/specs/wireguard.yaml new file mode 100644 index 000000000000..30479fc6bb69 --- /dev/null +++ b/Documentation/netlink/specs/wireguard.yaml @@ -0,0 +1,298 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) +--- +name: wireguard +protocol: genetlink-legacy + +doc: | + **Netlink protocol to control WireGuard network devices.** + + The below enums and macros are for interfacing with WireGuard, using generic + netlink, with family ``WG_GENL_NAME`` and version ``WG_GENL_VERSION``. It + defines two commands: get and set. Note that while they share many common + attributes, these two commands actually accept a slightly different set of + inputs and outputs. These differences are noted under the individual + attributes. +c-family-name: wg-genl-name +c-version-name: wg-genl-version +max-by-define: true + +definitions: + - + name-prefix: wg- + name: key-len + type: const + value: 32 + - + name: --kernel-timespec + type: struct + header: linux/time_types.h + members: + - + name: sec + type: u64 + doc: Number of seconds, since UNIX epoch. + - + name: nsec + type: u64 + doc: Number of nanoseconds, after the second began. + - + name: wgdevice-flags + name-prefix: wgdevice-f- + enum-name: wgdevice-flag + type: flags + entries: + - replace-peers + - + name: wgpeer-flags + name-prefix: wgpeer-f- + enum-name: wgpeer-flag + type: flags + entries: + - remove-me + - replace-allowedips + - update-only + - + name: wgallowedip-flags + name-prefix: wgallowedip-f- + enum-name: wgallowedip-flag + type: flags + entries: + - remove-me + +attribute-sets: + - + name: wgdevice + enum-name: wgdevice-attribute + name-prefix: wgdevice-a- + attr-cnt-name: --wgdevice-a-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: ifindex + type: u32 + - + name: ifname + type: string + checks: + max-len: 15 + - + name: private-key + type: binary + doc: Set to all zeros to remove. + display-hint: hex + checks: + exact-len: wg-key-len + - + name: public-key + type: binary + display-hint: hex + checks: + exact-len: wg-key-len + - + name: flags + type: u32 + doc: | + ``0`` or ``WGDEVICE_F_REPLACE_PEERS`` if all current peers should be + removed prior to adding the list below. + enum: wgdevice-flags + - + name: listen-port + type: u16 + doc: Set as ``0`` to choose randomly. + - + name: fwmark + type: u32 + doc: Set as ``0`` to disable. + - + name: peers + type: indexed-array + sub-type: nest + nested-attributes: wgpeer + doc: | + The index/type parameter is unused on ``SET_DEVICE`` operations and is + zero on ``GET_DEVICE`` operations. + - + name: wgpeer + enum-name: wgpeer-attribute + name-prefix: wgpeer-a- + attr-cnt-name: --wgpeer-a-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: public-key + type: binary + display-hint: hex + checks: + exact-len: wg-key-len + - + name: preshared-key + type: binary + doc: Set as all zeros to remove. + display-hint: hex + checks: + exact-len: wg-key-len + - + name: flags + type: u32 + doc: | + ``0`` and/or ``WGPEER_F_REMOVE_ME`` if the specified peer should not + exist at the end of the operation, rather than added/updated and/or + ``WGPEER_F_REPLACE_ALLOWEDIPS`` if all current allowed IPs of this + peer should be removed prior to adding the list below and/or + ``WGPEER_F_UPDATE_ONLY`` if the peer should only be set if it already + exists. + enum: wgpeer-flags + - + name: endpoint + type: binary + doc: struct sockaddr_in or struct sockaddr_in6 + checks: + min-len: 16 + - + name: persistent-keepalive-interval + type: u16 + doc: Set as ``0`` to disable. + - + name: last-handshake-time + type: binary + struct: --kernel-timespec + checks: + exact-len: 16 + - + name: rx-bytes + type: u64 + - + name: tx-bytes + type: u64 + - + name: allowedips + type: indexed-array + sub-type: nest + nested-attributes: wgallowedip + doc: | + The index/type parameter is unused on ``SET_DEVICE`` operations and is + zero on ``GET_DEVICE`` operations. + - + name: protocol-version + type: u32 + doc: | + Should not be set or used at all by most users of this API, as the + most recent protocol will be used when this is unset. Otherwise, + must be set to ``1``. + - + name: wgallowedip + enum-name: wgallowedip-attribute + name-prefix: wgallowedip-a- + attr-cnt-name: --wgallowedip-a-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: family + type: u16 + doc: IP family, either ``AF_INET`` or ``AF_INET6``. + - + name: ipaddr + type: binary + doc: Either ``struct in_addr`` or ``struct in6_addr``. + display-hint: ipv4-or-v6 + checks: + min-len: 4 + - + name: cidr-mask + type: u8 + - + name: flags + type: u32 + doc: | + ``WGALLOWEDIP_F_REMOVE_ME`` if the specified IP should be removed; + otherwise, this IP will be added if it is not already present. + enum: wgallowedip-flags + +operations: + enum-name: wg-cmd + name-prefix: wg-cmd- + list: + - + name: get-device + value: 0 + doc: | + Retrieve WireGuard device + ~~~~~~~~~~~~~~~~~~~~~~~~~ + + The command should be called with one but not both of: + + - ``WGDEVICE_A_IFINDEX`` + - ``WGDEVICE_A_IFNAME`` + + The kernel will then return several messages (``NLM_F_MULTI``). It is + possible that all of the allowed IPs of a single peer will not fit + within a single netlink message. In that case, the same peer will be + written in the following message, except it will only contain + ``WGPEER_A_PUBLIC_KEY`` and ``WGPEER_A_ALLOWEDIPS``. This may occur + several times in a row for the same peer. It is then up to the receiver + to coalesce adjacent peers. Likewise, it is possible that all peers will + not fit within a single message. So, subsequent peers will be sent in + following messages, except those will only contain ``WGDEVICE_A_IFNAME`` + and ``WGDEVICE_A_PEERS``. It is then up to the receiver to coalesce + these messages to form the complete list of peers. + + Since this is an ``NLA_F_DUMP`` command, the final message will always + be ``NLMSG_DONE``, even if an error occurs. However, this ``NLMSG_DONE`` + message contains an integer error code. It is either zero or a negative + error code corresponding to the errno. + attribute-set: wgdevice + flags: [uns-admin-perm] + + dump: + pre: wg-get-device-start + post: wg-get-device-done + request: + attributes: + - ifindex + - ifname + reply: &all-attrs + attributes: + - ifindex + - ifname + - private-key + - public-key + - flags + - listen-port + - fwmark + - peers + - + name: set-device + value: 1 + doc: | + Set WireGuard device + ~~~~~~~~~~~~~~~~~~~~ + + This command should be called with a wgdevice set, containing one but + not both of ``WGDEVICE_A_IFINDEX`` and ``WGDEVICE_A_IFNAME``. + + It is possible that the amount of configuration data exceeds that of the + maximum message length accepted by the kernel. In that case, several + messages should be sent one after another, with each successive one + filling in information not contained in the prior. Note that if + ``WGDEVICE_F_REPLACE_PEERS`` is specified in the first message, it + probably should not be specified in fragments that come after, so that + the list of peers is only cleared the first time but appended after. + Likewise for peers, if ``WGPEER_F_REPLACE_ALLOWEDIPS`` is specified in + the first message of a peer, it likely should not be specified in + subsequent fragments. + + If an error occurs, ``NLMSG_ERROR`` will reply containing an errno. + attribute-set: wgdevice + flags: [uns-admin-perm] + + do: + request: *all-attrs diff --git a/MAINTAINERS b/MAINTAINERS index 09932ab7e0e8..8b44a380642c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -27673,6 +27673,7 @@ M: Jason A. Donenfeld L: wireguard@lists.zx2c4.com L: netdev@vger.kernel.org S: Maintained +F: Documentation/netlink/specs/wireguard.yaml F: drivers/net/wireguard/ F: tools/testing/selftests/wireguard/ diff --git a/include/uapi/linux/wireguard.h b/include/uapi/linux/wireguard.h index 8c26391196d5..dee4401e0b5d 100644 --- a/include/uapi/linux/wireguard.h +++ b/include/uapi/linux/wireguard.h @@ -1,135 +1,6 @@ /* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */ /* * Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. - * - * Documentation - * ============= - * - * The below enums and macros are for interfacing with WireGuard, using generic - * netlink, with family WG_GENL_NAME and version WG_GENL_VERSION. It defines two - * methods: get and set. Note that while they share many common attributes, - * these two functions actually accept a slightly different set of inputs and - * outputs. - * - * WG_CMD_GET_DEVICE - * ----------------- - * - * May only be called via NLM_F_REQUEST | NLM_F_DUMP. The command should contain - * one but not both of: - * - * WGDEVICE_A_IFINDEX: NLA_U32 - * WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1 - * - * The kernel will then return several messages (NLM_F_MULTI) containing the - * following tree of nested items: - * - * WGDEVICE_A_IFINDEX: NLA_U32 - * WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1 - * WGDEVICE_A_PRIVATE_KEY: NLA_EXACT_LEN, len WG_KEY_LEN - * WGDEVICE_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN - * WGDEVICE_A_LISTEN_PORT: NLA_U16 - * WGDEVICE_A_FWMARK: NLA_U32 - * WGDEVICE_A_PEERS: NLA_NESTED - * 0: NLA_NESTED - * WGPEER_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN - * WGPEER_A_PRESHARED_KEY: NLA_EXACT_LEN, len WG_KEY_LEN - * WGPEER_A_ENDPOINT: NLA_MIN_LEN(struct sockaddr), struct sockaddr_in or struct sockaddr_in6 - * WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL: NLA_U16 - * WGPEER_A_LAST_HANDSHAKE_TIME: NLA_EXACT_LEN, struct __kernel_timespec - * WGPEER_A_RX_BYTES: NLA_U64 - * WGPEER_A_TX_BYTES: NLA_U64 - * WGPEER_A_ALLOWEDIPS: NLA_NESTED - * 0: NLA_NESTED - * WGALLOWEDIP_A_FAMILY: NLA_U16 - * WGALLOWEDIP_A_IPADDR: NLA_MIN_LEN(struct in_addr), struct in_addr or struct in6_addr - * WGALLOWEDIP_A_CIDR_MASK: NLA_U8 - * 0: NLA_NESTED - * ... - * 0: NLA_NESTED - * ... - * ... - * WGPEER_A_PROTOCOL_VERSION: NLA_U32 - * 0: NLA_NESTED - * ... - * ... - * - * It is possible that all of the allowed IPs of a single peer will not - * fit within a single netlink message. In that case, the same peer will - * be written in the following message, except it will only contain - * WGPEER_A_PUBLIC_KEY and WGPEER_A_ALLOWEDIPS. This may occur several - * times in a row for the same peer. It is then up to the receiver to - * coalesce adjacent peers. Likewise, it is possible that all peers will - * not fit within a single message. So, subsequent peers will be sent - * in following messages, except those will only contain WGDEVICE_A_IFNAME - * and WGDEVICE_A_PEERS. It is then up to the receiver to coalesce these - * messages to form the complete list of peers. - * - * Since this is an NLA_F_DUMP command, the final message will always be - * NLMSG_DONE, even if an error occurs. However, this NLMSG_DONE message - * contains an integer error code. It is either zero or a negative error - * code corresponding to the errno. - * - * WG_CMD_SET_DEVICE - * ----------------- - * - * May only be called via NLM_F_REQUEST. The command should contain the - * following tree of nested items, containing one but not both of - * WGDEVICE_A_IFINDEX and WGDEVICE_A_IFNAME: - * - * WGDEVICE_A_IFINDEX: NLA_U32 - * WGDEVICE_A_IFNAME: NLA_NUL_STRING, maxlen IFNAMSIZ - 1 - * WGDEVICE_A_FLAGS: NLA_U32, 0 or WGDEVICE_F_REPLACE_PEERS if all current - * peers should be removed prior to adding the list below. - * WGDEVICE_A_PRIVATE_KEY: len WG_KEY_LEN, all zeros to remove - * WGDEVICE_A_LISTEN_PORT: NLA_U16, 0 to choose randomly - * WGDEVICE_A_FWMARK: NLA_U32, 0 to disable - * WGDEVICE_A_PEERS: NLA_NESTED - * 0: NLA_NESTED - * WGPEER_A_PUBLIC_KEY: len WG_KEY_LEN - * WGPEER_A_FLAGS: NLA_U32, 0 and/or WGPEER_F_REMOVE_ME if the - * specified peer should not exist at the end of the - * operation, rather than added/updated and/or - * WGPEER_F_REPLACE_ALLOWEDIPS if all current allowed - * IPs of this peer should be removed prior to adding - * the list below and/or WGPEER_F_UPDATE_ONLY if the - * peer should only be set if it already exists. - * WGPEER_A_PRESHARED_KEY: len WG_KEY_LEN, all zeros to remove - * WGPEER_A_ENDPOINT: struct sockaddr_in or struct sockaddr_in6 - * WGPEER_A_PERSISTENT_KEEPALIVE_INTERVAL: NLA_U16, 0 to disable - * WGPEER_A_ALLOWEDIPS: NLA_NESTED - * 0: NLA_NESTED - * WGALLOWEDIP_A_FAMILY: NLA_U16 - * WGALLOWEDIP_A_IPADDR: struct in_addr or struct in6_addr - * WGALLOWEDIP_A_CIDR_MASK: NLA_U8 - * WGALLOWEDIP_A_FLAGS: NLA_U32, WGALLOWEDIP_F_REMOVE_ME if - * the specified IP should be removed; - * otherwise, this IP will be added if - * it is not already present. - * 0: NLA_NESTED - * ... - * 0: NLA_NESTED - * ... - * ... - * WGPEER_A_PROTOCOL_VERSION: NLA_U32, should not be set or used at - * all by most users of this API, as the - * most recent protocol will be used when - * this is unset. Otherwise, must be set - * to 1. - * 0: NLA_NESTED - * ... - * ... - * - * It is possible that the amount of configuration data exceeds that of - * the maximum message length accepted by the kernel. In that case, several - * messages should be sent one after another, with each successive one - * filling in information not contained in the prior. Note that if - * WGDEVICE_F_REPLACE_PEERS is specified in the first message, it probably - * should not be specified in fragments that come after, so that the list - * of peers is only cleared the first time but appended after. Likewise for - * peers, if WGPEER_F_REPLACE_ALLOWEDIPS is specified in the first message - * of a peer, it likely should not be specified in subsequent fragments. - * - * If an error occurs, NLMSG_ERROR will reply containing an errno. */ #ifndef _WG_UAPI_WIREGUARD_H