From 268eb6fb908bc82ce479e4dba9a2cad11f536c9c Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Fri, 19 Sep 2025 14:25:34 +0800 Subject: [PATCH 01/14] dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp Only i.MX8MP need dma-range property to let USB controller work properly. Remove dma-range from required list and add limitation for imx8mp. Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings") Cc: stable Reviewed-by: Jun Li Signed-off-by: Xu Yang Reviewed-by: Frank Li Acked-by: Conor Dooley Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml index baf130669c38..73e7a60a0060 100644 --- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -89,13 +89,21 @@ required: - reg - "#address-cells" - "#size-cells" - - dma-ranges - ranges - clocks - clock-names - interrupts - power-domains +allOf: + - if: + properties: + compatible: + const: fsl,imx8mp-dwc3 + then: + required: + - dma-ranges + additionalProperties: false examples: From 2758246d287549e1088eae350654160cbf4d424f Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 29 Sep 2025 20:28:50 +0200 Subject: [PATCH 02/14] usb: dwc3: Don't call clk_bulk_disable_unprepare() twice devm_clk_bulk_get_all_enabled() is used in the probe, so clk_bulk_disable_unprepare() should not be called explicitly in the remove function. Fixes: e0b6dc00c701 ("usb: dwc3: add generic driver to support flattened") Signed-off-by: Christophe JAILLET Acked-by: Thinh Nguyen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/dwc3-generic-plat.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c index d96b20570002..f8ad79c08c4e 100644 --- a/drivers/usb/dwc3/dwc3-generic-plat.c +++ b/drivers/usb/dwc3/dwc3-generic-plat.c @@ -85,11 +85,8 @@ static int dwc3_generic_probe(struct platform_device *pdev) static void dwc3_generic_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); - struct dwc3_generic *dwc3g = to_dwc3_generic(dwc); dwc3_core_remove(dwc); - - clk_bulk_disable_unprepare(dwc3g->num_clocks, dwc3g->clks); } static int dwc3_generic_suspend(struct device *dev) From bd8c3ce6d7a205b3ba3ef9815db4c6932290ec59 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 30 Sep 2025 19:17:21 +0200 Subject: [PATCH 03/14] dt-bindings: usb: switch: split out ports definition The ports definition currently defined in the usb-switch.yaml fits standards devices which are either recipient of altmode muxing and orientation switching events or an element of the USB Super Speed data lanes. This doesn't necessarely fit combo PHYs like the Qualcomm USB3/DP Combo which has a different ports representation. Move the ports definition to a separate usb-switch-ports.yaml and reference it next to the usb-switch.yaml, except for the Qualcomm USB3/DP Combo PHY bindings. Reported-by: Rob Herring Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/ Fixes: 3bad7fe22796 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch") Signed-off-by: Neil Armstrong Reviewed-by: Rob Herring (Arm) Signed-off-by: Greg Kroah-Hartman --- .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 4 +- .../bindings/phy/samsung,usb3-drd-phy.yaml | 4 +- .../devicetree/bindings/usb/fcs,fsa4480.yaml | 1 + .../devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 + .../devicetree/bindings/usb/nxp,ptn36502.yaml | 1 + .../bindings/usb/onnn,nb7vpq904m.yaml | 1 + .../bindings/usb/parade,ps8830.yaml | 1 + .../bindings/usb/qcom,wcd939x-usbss.yaml | 1 + .../devicetree/bindings/usb/ti,tusb1046.yaml | 1 + .../bindings/usb/usb-switch-ports.yaml | 68 +++++++++++++++++++ .../devicetree/bindings/usb/usb-switch.yaml | 52 -------------- 11 files changed, 81 insertions(+), 54 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/usb-switch-ports.yaml diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index 6a47e08e0e97..f9cffbb2df07 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -142,7 +142,9 @@ allOf: required: - orientation-switch then: - $ref: /schemas/usb/usb-switch.yaml# + allOf: + - $ref: /schemas/usb/usb-switch.yaml# + - $ref: /schemas/usb/usb-switch-ports.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml index e906403208c0..ea1135c91fb7 100644 --- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml +++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml @@ -125,7 +125,9 @@ allOf: contains: const: google,gs101-usb31drd-phy then: - $ref: /schemas/usb/usb-switch.yaml# + allOf: + - $ref: /schemas/usb/usb-switch.yaml# + - $ref: /schemas/usb/usb-switch-ports.yaml# properties: clocks: diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index e3a7df91f7f1..89b1fb90aeeb 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -76,6 +76,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index e588514fab2d..793662f6f3bf 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -52,6 +52,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# - if: required: - mode-switch diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml index d805dde80796..4d2fcaa71870 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -46,6 +46,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml index 589914d22bf2..25fab5fdc2cd 100644 --- a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -91,6 +91,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/parade,ps8830.yaml b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml index aeb33667818e..eaeab1c01a59 100644 --- a/Documentation/devicetree/bindings/usb/parade,ps8830.yaml +++ b/Documentation/devicetree/bindings/usb/parade,ps8830.yaml @@ -81,6 +81,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml index 96346723f3e9..96dcec9b7620 100644 --- a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -60,6 +60,7 @@ required: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml index f713cac4a8ac..e1501ea6b50b 100644 --- a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: usb-switch.yaml# + - $ref: usb-switch-ports.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/usb-switch-ports.yaml b/Documentation/devicetree/bindings/usb/usb-switch-ports.yaml new file mode 100644 index 000000000000..6bf0c97e30ae --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-switch-ports.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-switch-ports.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Orientation and Mode Switches Ports Graph Properties + +maintainers: + - Greg Kroah-Hartman + +description: + Ports Graph properties for devices handling USB mode and orientation switching. + +properties: + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + A port node to link the device to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml index 896201912630..f77731493dc4 100644 --- a/Documentation/devicetree/bindings/usb/usb-switch.yaml +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml @@ -25,56 +25,4 @@ properties: description: Possible handler of SuperSpeed signals retiming type: boolean - port: - $ref: /schemas/graph.yaml#/$defs/port-base - description: - A port node to link the device to a TypeC controller for the purpose of - handling altmode muxing and orientation switching. - - properties: - endpoint: - $ref: /schemas/graph.yaml#/$defs/endpoint-base - unevaluatedProperties: false - properties: - data-lanes: - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - maximum: 8 - - ports: - $ref: /schemas/graph.yaml#/properties/ports - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: - Super Speed (SS) Output endpoint to the Type-C connector - - port@1: - $ref: /schemas/graph.yaml#/$defs/port-base - description: - Super Speed (SS) Input endpoint from the Super-Speed PHY - unevaluatedProperties: false - - properties: - endpoint: - $ref: /schemas/graph.yaml#/$defs/endpoint-base - unevaluatedProperties: false - properties: - data-lanes: - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 1 - maxItems: 8 - uniqueItems: true - items: - maximum: 8 - -oneOf: - - required: - - port - - required: - - ports - additionalProperties: true From dddc0f71485f1f29f236e387632181bcc09019a0 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Mon, 6 Oct 2025 22:39:52 +0100 Subject: [PATCH 04/14] usb: misc: Add x86 dependency for Intel USBIO driver The Intel USBIO driver is x86 only, other architectures have ACPI so add an appropriate depenecy plus compile test. Fixes: 121a0f839dbb3 ("usb: misc: Add Intel USBIO bridge driver") Signed-off-by: Peter Robinson Reviewed-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 09ac6f1c985f..0b56b773dbdf 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -182,6 +182,7 @@ config USB_LJCA config USB_USBIO tristate "Intel USBIO Bridge support" depends on USB && ACPI + depends on X86 || COMPILE_TEST select AUXILIARY_BUS help This adds support for Intel USBIO drivers. From 51cb04abd39097209b871e95ffa7e8584ce7dcba Mon Sep 17 00:00:00 2001 From: Krishna Kurapati Date: Mon, 13 Oct 2025 09:29:20 +0530 Subject: [PATCH 05/14] dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100 Add the missing multiport controller binding to target list. Fix minItems for interrupt-names to avoid the following error on High Speed controller: usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short Fixes: 6e762f7b8edc ("dt-bindings: usb: Introduce qcom,snps-dwc3") Cc: stable@vger.kernel.org Signed-off-by: Krishna Kurapati Reviewed-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml index dfd084ed9024..d49a58d5478f 100644 --- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml @@ -68,6 +68,7 @@ properties: - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 - qcom,x1e80100-dwc3 + - qcom,x1e80100-dwc3-mp - const: qcom,snps-dwc3 reg: @@ -460,8 +461,10 @@ allOf: then: properties: interrupts: + minItems: 4 maxItems: 5 interrupt-names: + minItems: 4 items: - const: dwc_usb3 - const: pwr_event From 8607edcd1748503f4f58e66ca0216170f260c79b Mon Sep 17 00:00:00 2001 From: Michal Pecio Date: Tue, 14 Oct 2025 01:55:40 +0300 Subject: [PATCH 06/14] usb: xhci-pci: Fix USB2-only root hub registration A recent change to hide USB3 root hubs of USB2-only controllers broke registration of USB2 root hubs - allow_single_roothub is set too late, and by this time xhci_run() has already deferred root hub registration until after the shared HCD is added, which will never happen. This makes such controllers unusable, but testers didn't notice since they were only bothered by warnings about empty USB3 root hubs. The bug causes problems to other people who actually use such HCs and I was able to confirm it on an ordinary HC by patching to ignore USB3 ports. Setting allow_single_roothub during early setup fixes things. Reported-by: Arisa Snowbell Closes: https://lore.kernel.org/linux-usb/CABpa4MA9unucCoKtSdzJyOLjHNVy+Cwgz5AnAxPkKw6vuox1Nw@mail.gmail.com/ Reported-by: Michal Kubecek Closes: https://lore.kernel.org/linux-usb/lnb5bum7dnzkn3fc7gq6hwigslebo7o4ccflcvsc3lvdgnu7el@fvqpobbdoapl/ Fixes: 719de070f764 ("usb: xhci-pci: add support for hosts with zero USB3 ports") Tested-by: Arisa Snowbell Tested-by: Michal Kubecek Suggested-by: Mathias Nyman Signed-off-by: Michal Pecio Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 5c8ab519f497..f67a4d956204 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -582,6 +582,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (!usb_hcd_is_primary_hcd(hcd)) return 0; + xhci->allow_single_roothub = 1; + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) xhci_pme_acpi_rtd3_enable(pdev); @@ -637,7 +639,6 @@ int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id) xhci = hcd_to_xhci(hcd); xhci->reset = reset; - xhci->allow_single_roothub = 1; if (!xhci_has_one_roothub(xhci)) { xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev, pci_name(dev), hcd); From f3d12ec847b945d5d65846c85f062d07d5e73164 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 14 Oct 2025 01:55:41 +0300 Subject: [PATCH 07/14] xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for incoming data are queued, but driver handles the event after it queued the TRBs. This is possible as xHCI DbC hardware may trigger spurious STALL transfer events even if endpoint is empty. The STALL event contains a pointer to the stalled TRB, and "remaining" untransferred data length. As there are no TRBs queued yet the STALL event will just point to first TRB position of the empty ring, with '0' bytes remaining untransferred. DbC driver is polling for events, and may not handle the STALL event before /dev/ttyDBC0 is opened and incoming data TRBs are queued. The DbC event handler will now assume the first queued TRB (length 1024) has stalled with '0' bytes remaining untransferred, and copies the data This race situation can be practically mitigated by making sure the event handler handles all pending transfer events when DbC reaches configured state, and only then create dev/ttyDbC0, and start queueing transfers. The event handler can this way detect the STALL events on empty rings and discard them before any transfers are queued. This does in practice solve the issue, but still leaves a small possible gap for the race to trigger. We still need a way to distinguish spurious STALLs on empty rings with '0' bytes remaing, from actual STALL events with all bytes transmitted. Cc: stable Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbgcap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 63edf2d8f245..023a8ec6f305 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -892,7 +892,8 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) dev_info(dbc->dev, "DbC configured\n"); portsc = readl(&dbc->regs->portsc); writel(portsc, &dbc->regs->portsc); - return EVT_GSER; + ret = EVT_GSER; + break; } return EVT_DONE; @@ -954,7 +955,8 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) break; case TRB_TYPE(TRB_TRANSFER): dbc_handle_xfer_event(dbc, evt); - ret = EVT_XFER_DONE; + if (ret != EVT_GSER) + ret = EVT_XFER_DONE; break; default: break; From 2bbd38fcd29670e46c0fdb9cd0e90507a8a1bf6a Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 14 Oct 2025 01:55:42 +0300 Subject: [PATCH 08/14] xhci: dbc: enable back DbC in resume if it was enabled before suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DbC is currently only enabled back if it's in configured state during suspend. If system is suspended after DbC is enabled, but before the device is properly enumerated by the host, then DbC would not be enabled back in resume. Always enable DbC back in resume if it's suspended in enabled, connected, or configured state Cc: stable Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Tested-by: Łukasz Bartosik Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbgcap.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 023a8ec6f305..ecda964e018a 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -1392,8 +1392,15 @@ int xhci_dbc_suspend(struct xhci_hcd *xhci) if (!dbc) return 0; - if (dbc->state == DS_CONFIGURED) + switch (dbc->state) { + case DS_ENABLED: + case DS_CONNECTED: + case DS_CONFIGURED: dbc->resume_required = 1; + break; + default: + break; + } xhci_dbc_stop(dbc); From 71c07570b918f000de5d0f7f1bf17a2887e303b5 Mon Sep 17 00:00:00 2001 From: Renjun Wang Date: Sun, 19 Oct 2025 18:44:38 +0800 Subject: [PATCH 09/14] USB: serial: option: add UNISOC UIS7720 Add support for UNISOC (Spreadtrum) UIS7720 (A7720) module. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4064 Rev=04.04 S: Manufacturer=Unisoc-phone S: Product=Unisoc-phone S: SerialNumber=0123456789ABCDEF C: #Ifs= 9 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0&1: RNDIS, 2: LOG, 3: DIAG, 4&5: AT Ports, 6&7: AT2 Ports, 8: ADB Signed-off-by: Renjun Wang Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 62e984d20e59..ed1328648a73 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -617,6 +617,7 @@ static void option_instat_callback(struct urb *urb); #define UNISOC_VENDOR_ID 0x1782 /* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */ #define TOZED_PRODUCT_LT70C 0x4055 +#define UNISOC_PRODUCT_UIS7720 0x4064 /* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ #define LUAT_PRODUCT_AIR720U 0x4e00 @@ -2466,6 +2467,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9291, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, UNISOC_PRODUCT_UIS7720, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(0x1bbb, 0x0530, 0xff), /* TCL IK512 MBIM */ .driver_info = NCTRL(1) }, From 37b9dd0d114a0e38c502695e30f55a74fb0c37d0 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Wed, 22 Oct 2025 00:25:45 +0200 Subject: [PATCH 10/14] usb: raw-gadget: do not limit transfer length Drop the check on the maximum transfer length in Raw Gadget for both control and non-control transfers. Limiting the transfer length causes a problem with emulating USB devices whose full configuration descriptor exceeds PAGE_SIZE in length. Overall, there does not appear to be any reason to enforce any kind of transfer length limit on the Raw Gadget side for either control or non-control transfers, so let's just drop the related check. Cc: stable Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Signed-off-by: Andrey Konovalov Link: https://patch.msgid.link/a6024e8eab679043e9b8a5defdb41c4bda62f02b.1761085528.git.andreyknvl@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/legacy/raw_gadget.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c index 20165e1582d9..b71680c58de6 100644 --- a/drivers/usb/gadget/legacy/raw_gadget.c +++ b/drivers/usb/gadget/legacy/raw_gadget.c @@ -667,8 +667,6 @@ static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr, return ERR_PTR(-EINVAL); if (!usb_raw_io_flags_valid(io->flags)) return ERR_PTR(-EINVAL); - if (io->length > PAGE_SIZE) - return ERR_PTR(-EINVAL); if (get_from_user) data = memdup_user(ptr + sizeof(*io), io->length); else { From dfc2cf4dcaa03601cd4ca0f7def88b2630fca6ab Mon Sep 17 00:00:00 2001 From: Tim Guttzeit Date: Mon, 20 Oct 2025 15:39:04 +0200 Subject: [PATCH 11/14] usb/core/quirks: Add Huawei ME906S to wakeup quirk The list of Huawei LTE modules needing the quirk fixing spurious wakeups was missing the IDs of the Huawei ME906S module, therefore suspend did not work. Cc: stable Signed-off-by: Tim Guttzeit Signed-off-by: Werner Sembach Link: https://patch.msgid.link/20251020134304.35079-1-wse@tuxedocomputers.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f5bc53875330..47f589c4104a 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -467,6 +467,8 @@ static const struct usb_device_id usb_quirk_list[] = { /* Huawei 4G LTE module */ { USB_DEVICE(0x12d1, 0x15bb), .driver_info = USB_QUIRK_DISCONNECT_SUSPEND }, + { USB_DEVICE(0x12d1, 0x15c1), .driver_info = + USB_QUIRK_DISCONNECT_SUSPEND }, { USB_DEVICE(0x12d1, 0x15c3), .driver_info = USB_QUIRK_DISCONNECT_SUSPEND }, From 2d8713f807a49b8a67c221670e50ae04967e915d Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 13 Oct 2025 11:43:40 +0200 Subject: [PATCH 12/14] tcpm: switch check for role_sw device with fw_node When there is no port entry in the tcpci entry itself, the driver will trigger an error message "OF: graph: no port node found in /...../typec" . It is documented that the dts node should contain an connector entry with ports and several port pointing to devices with usb-role-switch property set. Only when those connector entry is missing, it should check for port entries in the main node. We switch the search order for looking after ports, which will avoid the failure message while there are explicit connector entries. Fixes: d56de8c9a17d ("usb: typec: tcpm: try to get role switch from tcpc fwnode") Cc: stable Signed-off-by: Michael Grzeschik Reviewed-by: Heikki Krogerus Reviewed-by: Badhri Jagan Sridharan Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index b2a568a5bc9b..cc78770509db 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -7876,9 +7876,9 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) port->partner_desc.identity = &port->partner_ident; - port->role_sw = usb_role_switch_get(port->dev); + port->role_sw = fwnode_usb_role_switch_get(tcpc->fwnode); if (!port->role_sw) - port->role_sw = fwnode_usb_role_switch_get(tcpc->fwnode); + port->role_sw = usb_role_switch_get(port->dev); if (IS_ERR(port->role_sw)) { err = PTR_ERR(port->role_sw); goto out_destroy_wq; From 89205c60c0fc96b73567a2e9fe27ee3f59d01193 Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer Date: Wed, 22 Oct 2025 16:17:26 +0200 Subject: [PATCH 13/14] USB: serial: option: add Quectel RG255C Add support for Quectel RG255C devices to complement commit 5c964c8a97c1 ("net: usb: qmi_wwan: add Quectel RG255C"). The composition is DM / NMEA / AT / QMI. T: Bus=01 Lev=02 Prnt=99 Port=01 Cnt=02 Dev#=110 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0316 Rev= 5.15 S: Manufacturer=Quectel S: Product=RG255C-GL S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ed1328648a73..3d6ebe2692a9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -273,6 +273,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM05CN 0x0312 #define QUECTEL_PRODUCT_EM05G_GR 0x0313 #define QUECTEL_PRODUCT_EM05G_RS 0x0314 +#define QUECTEL_PRODUCT_RG255C 0x0316 #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 @@ -1271,6 +1272,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG650V, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG255C, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG255C, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RG255C, 0xff, 0xff, 0x40) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, From 622865c73ae30f254abdf182f4b66cccbe3e0f10 Mon Sep 17 00:00:00 2001 From: LI Qingwu Date: Thu, 23 Oct 2025 03:44:22 +0000 Subject: [PATCH 14/14] USB: serial: option: add Telit FN920C04 ECM compositions Add support for the Telit Cinterion FN920C04 module when operating in ECM (Ethernet Control Model) mode. The following USB product IDs are used by the module when AT#USBCFG is set to 3 or 7. 0x10A3: ECM + tty (NMEA) + tty (DUN) [+ tty (DIAG)] T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a3 Rev= 5.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=76e7cb38 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10A8: ECM + tty (DUN) + tty (AUX) [+ tty (DIAG)] T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a8 Rev= 5.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=76e7cb38 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Adding these IDs allows the option driver to automatically create the corresponding /dev/ttyUSB* ports under ECM mode. Tested with FN920C04 under ECM configuration (USBCFG=3 and 7). Signed-off-by: LI Qingwu Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 3d6ebe2692a9..5de856f65f0d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1403,10 +1403,14 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a2, 0xff), /* Telit FN920C04 (MBIM) */ .driver_info = NCTRL(4) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a3, 0xff), /* Telit FN920C04 (ECM) */ + .driver_info = NCTRL(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a7, 0xff), /* Telit FN920C04 (MBIM) */ .driver_info = NCTRL(4) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a8, 0xff), /* Telit FN920C04 (ECM) */ + .driver_info = NCTRL(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff), /* Telit FN20C04 (rmnet) */ .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff), /* Telit FN920C04 (MBIM) */