Devicetree updates for v6.19:

DT bindings:
 - Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
   amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
   AP80x System Controller, Marvell CP110 System Controller,
   cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
 
 - Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
   EEPROM, and Microchip pic64gx PLIC
 
 - Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
 
 - Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
   bindings to fix warnings on BCM2712 platforms
 
 - Drop obsolete db8500-thermal.txt
 
 - Treewide clean-up of extra blank lines and inconsistent quoting
 
 - Ensure all .dtbo targets are applied to a base .dtb
 
 - Speed up dt_binding_check by skipping running validation on empty
   examples
 
 DT core:
 - Add of_machine_device_match() and of_machine_get_match_data() helpers
   and convert users treewide
 
 - Fix bounds checking of address properties in FDT code. Rework the code
   to have a single implementation of the bounds checks.
 
 - Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
   a parent node) on nodes without an interrupt. This matches the spec
   description and fixes some RISC-V platforms.
 
 - Avoid a spurious message on overlay removal
 
 - Skip DT kunit tests on RISCV+ACPI
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmkwYp0ACgkQ+vtdtY28
 YcMS1g/+Mr3pzojHKUEClu3hglNEw1Bvl/rD07s5q+f4d2eayXtRJVBDgKIwYciT
 rROXLV9m0Ko2RGiRLHAeB/h4Jjd8NXzLM0GA0YvoHSgtk77xLCuzK5ZEW3o6EoYW
 DWVHyoMHDNRRC0Iu+CaS6XId1DrtbV6Wc/oLYvoSJvpdsW9EYOksfrtKQAYU9X5p
 /x5XKO4h8RIQTBmg/kjvJLUV6+7cJvOnkF/JkDyh+xOHrIJzQp/bJwcKiU3hGlhX
 nGFtjmItNDsFGvR1CtDzUobEE/wgI3xCQHUmufInSNPB7VGw3hbp0nvaQ6htPQQQ
 NOA1Q7lXJtqChUZx7OAHk64TQHhVlmJJoy0zCueTgRyjXU0nWb/id2Hn16k96FRh
 3YCGArTBFlRriHuCj0fsZ618cLEN2nZCzqSf34HVjs30iP7oLauEJ+WgmfH491TB
 eq60Vlwomxq60/hWqCdY1NTCo/zbfYUE+exry69NcL5KSZBN2WGwLPZUgVvYhNO3
 dhSgAg+06ib7uq0LLUiokQXaByEEFJt2TxIjp9IDAqkPnvQmDverKL5DZUBHIYxw
 E/89Pmm77DagdcIhMocbsdoH5Qu4qH8pdhfR3PL+Ma9drRLxmk3MpiT52VJZem0S
 iXHb6fyfQzQ/WJcA4sKapa8EMZRm/9U/pVDx1msDmHfB8pbDEi0=
 =ZM/+
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DT bindings:

   - Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
     brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
     Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
     Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
     format

   - Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
     EEPROM, and Microchip pic64gx PLIC

   - Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
     compatibles

   - Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
     bindings to fix warnings on BCM2712 platforms

   - Drop obsolete db8500-thermal.txt

   - Treewide clean-up of extra blank lines and inconsistent quoting

   - Ensure all .dtbo targets are applied to a base .dtb

   - Speed up dt_binding_check by skipping running validation on empty
     examples

  DT core:

   - Add of_machine_device_match() and of_machine_get_match_data()
     helpers and convert users treewide

   - Fix bounds checking of address properties in FDT code. Rework the
     code to have a single implementation of the bounds checks.

   - Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
     in a parent node) on nodes without an interrupt. This matches the
     spec description and fixes some RISC-V platforms.

   - Avoid a spurious message on overlay removal

   - Skip DT kunit tests on RISCV+ACPI"

* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: kbuild: Skip validating empty examples
  dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
  dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
  dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
  of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
  soc: tegra: Simplify with of_machine_device_match()
  soc: qcom: ubwc: Simplify with of_machine_get_match_data()
  powercap: dtpm: Simplify with of_machine_get_match_data()
  platform: surface: Simplify with of_machine_get_match_data()
  irqchip/atmel-aic: Simplify with of_machine_get_match_data()
  firmware: qcom: scm: Simplify with of_machine_device_match()
  cpuidle: big_little: Simplify with of_machine_device_match()
  cpufreq: sun50i: Simplify with of_machine_device_match()
  cpufreq: mediatek: Simplify with of_machine_get_match_data()
  cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
  of: Add wrappers to match root node with OF device ID tables
  dt-bindings: eeprom: at25: Add Anvo ANV32C81W
  of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
  of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
  of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
  ...

Documentation/devicetree/bindings/.yamllint

@@ -30,7 +30,7 @@ rules:
   document-start:
     present: true
   empty-lines:
-    max: 3
+    max: 1
     max-end: 1
   empty-values:
     forbid-in-block-mappings: true

Documentation/devicetree/bindings/Makefile

@@ -32,7 +32,8 @@ find_cmd = $(find_all_cmd) | \
 		sed 's|^$(srctree)/||' | \
 		grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \
 		sed 's|^|$(srctree)/|'
-CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, $(shell $(find_cmd)))
+CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, \
+			      $(shell $(find_cmd) | xargs grep -l '^examples:'))
 
 quiet_cmd_yamllint = LINT    $(src)
       cmd_yamllint = ($(find_cmd) | \

Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml

@@ -27,17 +27,17 @@ properties:
     additionalProperties: false
 
     properties:
-      "#address-cells":
+      '#address-cells':
         const: 1
 
-      "#size-cells":
+      '#size-cells':
         const: 0
 
     patternProperties:
-      "^osc[0-9]$":
+      '^osc[0-9]$':
         type: object
 
-      "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$":
+      '^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$':
         type: object
         $ref: '#/$defs/clock-props'
         unevaluatedProperties: false
@@ -58,14 +58,14 @@ properties:
             minItems: 1
             maxItems: 5
 
-          "#address-cells":
+          '#address-cells':
             const: 1
 
-          "#size-cells":
+          '#size-cells':
             const: 0
 
         patternProperties:
-          "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$":
+          '^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$':
             type: object
             $ref: '#/$defs/clock-props'
             unevaluatedProperties: false
@@ -86,11 +86,11 @@ properties:
             required:
               - compatible
               - clocks
-              - "#clock-cells"
+              - '#clock-cells'
 
         required:
           - compatible
-          - "#clock-cells"
+          - '#clock-cells'
 
 required:
   - compatible
@@ -104,7 +104,7 @@ $defs:
       reg:
         maxItems: 1
 
-      "#clock-cells":
+      '#clock-cells':
         const: 0
 
       clk-gate:

Documentation/devicetree/bindings/arm/amd,seattle.yaml

@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amd,seattle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Seattle SoC Platforms
+
+maintainers:
+  - Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+  - Tom Lendacky <thomas.lendacky@amd.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Boards with AMD Seattle SoC
+        items:
+          - const: amd,seattle-overdrive
+          - const: amd,seattle
+
+additionalProperties: true
+...

Documentation/devicetree/bindings/arm/apm.yaml

@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC Platforms
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Boards with X-Gene1 Soc
+        items:
+          - const: apm,mustang
+          - const: apm,xgene-storm
+
+      - description: Boards with X-Gene2 SoC
+        items:
+          - const: apm,merlin
+          - const: apm,xgene-shadowcat
+
+additionalProperties: true
+...

Documentation/devicetree/bindings/arm/lge.yaml

@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/lge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG Electronics SoC Platforms
+
+maintainers:
+  - Chanho Min <chanho.min@lge.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Boards with LG1312 Soc
+        items:
+          - const: lge,lg1312-ref
+          - const: lge,lg1312
+
+      - description: Boards with LG1313 SoC
+        items:
+          - const: lge,lg1313-ref
+          - const: lge,lg1313
+
+additionalProperties: true
+...

Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt

@@ -1,146 +0,0 @@
-Marvell Armada AP80x System Controller
-======================================
-
-The AP806/AP807 is one of the two core HW blocks of the Marvell Armada
-7K/8K/931x SoCs. It contains system controllers, which provide several
-registers giving access to numerous features: clocks, pin-muxing and
-many other SoC configuration items. This DT binding allows to describe
-these system controllers.
-
-For the top level node:
- - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the AP80x system controller
-
-SYSTEM CONTROLLER 0
-===================
-
-Clocks:
--------
-
-
-The Device Tree node representing the AP806/AP807 system controller
-provides a number of clocks:
-
- - 0: reference clock of CPU cluster 0
- - 1: reference clock of CPU cluster 1
- - 2: fixed PLL at 1200 Mhz
- - 3: MSS clock, derived from the fixed PLL
-
-Required properties:
-
- - compatible: must be one of:
-   * "marvell,ap806-clock"
-   * "marvell,ap807-clock"
- - #clock-cells: must be set to 1
-
-Pinctrl:
---------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
-
-Required properties:
-- compatible must be "marvell,ap806-pinctrl",
-
-Available mpp pins/groups and functions:
-Note: brackets (x) are not part of the mpp name for marvell,function and given
-only for more detailed description in this document.
-
-name	pins	functions
-================================================================================
-mpp0	0	gpio, sdio(clk), spi0(clk)
-mpp1	1	gpio, sdio(cmd), spi0(miso)
-mpp2	2	gpio, sdio(d0), spi0(mosi)
-mpp3	3	gpio, sdio(d1), spi0(cs0n)
-mpp4	4	gpio, sdio(d2), i2c0(sda)
-mpp5	5	gpio, sdio(d3), i2c0(sdk)
-mpp6	6	gpio, sdio(ds)
-mpp7	7	gpio, sdio(d4), uart1(rxd)
-mpp8	8	gpio, sdio(d5), uart1(txd)
-mpp9	9	gpio, sdio(d6), spi0(cs1n)
-mpp10	10	gpio, sdio(d7)
-mpp11	11	gpio, uart0(txd)
-mpp12	12	gpio, sdio(pw_off), sdio(hw_rst)
-mpp13	13	gpio
-mpp14	14	gpio
-mpp15	15	gpio
-mpp16	16	gpio
-mpp17	17	gpio
-mpp18	18	gpio
-mpp19	19	gpio, uart0(rxd), sdio(pw_off)
-
-GPIO:
------
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
-
-Required properties:
-
-- compatible: "marvell,armada-8k-gpio"
-
-- offset: offset address inside the syscon block
-
-Optional properties:
-
-- marvell,pwm-offset: offset address of PWM duration control registers inside
-  the syscon block
-
-Example:
-ap_syscon: system-controller@6f4000 {
-	compatible = "syscon", "simple-mfd";
-	reg = <0x6f4000 0x1000>;
-
-	ap_clk: clock {
-		compatible = "marvell,ap806-clock";
-		#clock-cells = <1>;
-	};
-
-	ap_pinctrl: pinctrl {
-		compatible = "marvell,ap806-pinctrl";
-	};
-
-	ap_gpio: gpio {
-		compatible = "marvell,armada-8k-gpio";
-		offset = <0x1040>;
-		ngpios = <19>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&ap_pinctrl 0 0 19>;
-		marvell,pwm-offset = <0x10c0>;
-		#pwm-cells = <2>;
-		clocks = <&ap_clk 3>;
-	};
-};
-
-SYSTEM CONTROLLER 1
-===================
-
-Cluster clocks:
----------------
-
-Device Tree Clock bindings for cluster clock of Marvell
-AP806/AP807. Each cluster contain up to 2 CPUs running at the same
-frequency.
-
-Required properties:
- - compatible: must be one of:
-   * "marvell,ap806-cpu-clock"
-   * "marvell,ap807-cpu-clock"
-- #clock-cells : should be set to 1.
-
-- clocks : shall be the input parent clock(s) phandle for the clock
-           (one per cluster)
-
-- reg: register range associated with the cluster clocks
-
-ap_syscon1: system-controller@6f8000 {
-	compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd";
-	reg = <0x6f8000 0x1000>;
-
-	cpu_clk: clock-cpu@278 {
-		compatible = "marvell,ap806-cpu-clock";
-		clocks = <&ap_clk 0>, <&ap_clk 1>;
-		#clock-cells = <1>;
-		reg = <0x278 0xa30>;
-	};
-};

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt

@@ -1,191 +0,0 @@
-Marvell Armada CP110 System Controller
-======================================
-
-The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains system controllers, which provide several registers
-giving access to numerous features: clocks, pin-muxing and many other
-SoC configuration items. This DT binding allows to describe these
-system controllers.
-
-For the top level node:
- - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the CP110 system controller
-
-SYSTEM CONTROLLER 0
-===================
-
-Clocks:
--------
-
-The Device Tree node representing this System Controller 0 provides a
-number of clocks:
-
- - a set of core clocks
- - a set of gateable clocks
-
-Those clocks can be referenced by other Device Tree nodes using two
-cells:
- - The first cell must be 0 or 1. 0 for the core clocks and 1 for the
-   gateable clocks.
- - The second cell identifies the particular core clock or gateable
-   clocks.
-
-The following clocks are available:
- - Core clocks
-   - 0 0	APLL
-   - 0 1	PPv2 core
-   - 0 2	EIP
-   - 0 3	Core
-   - 0 4	NAND core
-   - 0 5	SDIO core
- - Gateable clocks
-   - 1 0	Audio
-   - 1 1	Comm Unit
-   - 1 2	NAND
-   - 1 3	PPv2
-   - 1 4	SDIO
-   - 1 5	MG Domain
-   - 1 6	MG Core
-   - 1 7	XOR1
-   - 1 8	XOR0
-   - 1 9	GOP DP
-   - 1 11	PCIe x1 0
-   - 1 12	PCIe x1 1
-   - 1 13	PCIe x4
-   - 1 14	PCIe / XOR
-   - 1 15	SATA
-   - 1 16	SATA USB
-   - 1 17	Main
-   - 1 18	SD/MMC/GOP
-   - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
-   - 1 22	USB3H0
-   - 1 23	USB3H1
-   - 1 24	USB3 Device
-   - 1 25	EIP150
-   - 1 26	EIP197
-
-Required properties:
-
- - compatible: must be:
-     "marvell,cp110-clock"
- - #clock-cells: must be set to 2
-
-Pinctrl:
---------
-
-For common binding part and usage, refer to the file
-Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
-
-Required properties:
-
-- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl",
-  "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl"
-  depending on the specific variant of the SoC being used.
-
-Available mpp pins/groups and functions:
-Note: brackets (x) are not part of the mpp name for marvell,function and given
-only for more detailed description in this document.
-
-name	pins	functions
-================================================================================
-mpp0	0	gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
-mpp1	1	gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
-mpp2	2	gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
-mpp3	3	gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
-mpp4	4	gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
-mpp5	5	gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
-mpp6	6	gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
-mpp7	7	gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
-mpp8	8	gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
-mpp9	9	gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
-mpp10	10	gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
-mpp11	11	gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
-mpp12	12	gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
-mpp13	13	gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
-mpp14	14	gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
-mpp15	15	gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
-mpp16	16	gpio, dev(ad6), spi1(clk), mss_spi(clk)
-mpp17	17	gpio, dev(ad5), ge0(txd3)
-mpp18	18	gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
-mpp19	19	gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
-mpp20	20	gpio, dev(ad2), ge0(txd0)
-mpp21	21	gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
-mpp22	22	gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
-mpp23	23	gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
-mpp24	24	gpio, dev(a0), au(i2slrclk)
-mpp25	25	gpio, dev(oen), au(i2sdo_spdifo)
-mpp26	26	gpio, dev(wen0), au(i2sbclk)
-mpp27	27	gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
-mpp28	28	gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
-mpp29	29	gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
-mpp30	30	gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
-mpp31	31	gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
-mpp32	32	gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
-mpp33	33	gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
-mpp34	34	gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
-mpp35	35	gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
-mpp36	36	gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
-mpp37	37	gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
-mpp38	38	gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
-mpp39	39	gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
-mpp40	40	gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
-mpp41	41	gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
-mpp42	42	gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
-mpp43	43	gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
-mpp44	44	gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
-mpp45	45	gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
-mpp46	46	gpio, ge1(txd1), uart1(rts)
-mpp47	47	gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
-mpp48	48	gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
-mpp49	49	gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
-mpp50	50	gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
-mpp51	51	gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
-mpp52	52	gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
-mpp53	53	gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
-mpp54	54	gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect)
-mpp55	55	gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect)
-mpp56	56	gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
-mpp57	57	gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
-mpp58	58	gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
-mpp59	59	gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
-mpp60	60	gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
-mpp61	61	gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
-mpp62	62	gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
-
-GPIO:
------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
-
-Required properties:
-
-- compatible: "marvell,armada-8k-gpio"
-
-- offset: offset address inside the syscon block
-
-Example:
-
-CP110_LABEL(syscon0): system-controller@440000 {
-	compatible = "syscon", "simple-mfd";
-	reg = <0x440000 0x1000>;
-
-	CP110_LABEL(clk): clock {
-		compatible = "marvell,cp110-clock";
-		#clock-cells = <2>;
-	};
-
-	CP110_LABEL(pinctrl): pinctrl {
-		compatible = "marvell,armada-8k-cpm-pinctrl";
-	};
-
-	CP110_LABEL(gpio1): gpio@100 {
-		compatible = "marvell,armada-8k-gpio";
-		offset = <0x100>;
-		ngpios = <32>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
-	};
-
-};

Documentation/devicetree/bindings/arm/psci.yaml

@@ -163,7 +163,6 @@ examples:
       method          = "smc";
     };
 
-
   - |+
 
     // Case 3: PSCI v0.2 and PSCI v0.1.

Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml

@@ -43,7 +43,7 @@ properties:
     maximum: 20000000
 
 patternProperties:
-  "^.*@[0-9a-fA-F]+$":
+  "@[0-9a-f]+$":
     type: object
     additionalProperties: true
     properties:

Documentation/devicetree/bindings/bus/cznic,moxtet.yaml

@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/cznic,moxtet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Turris Moxtet SPI bus
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description: >
+  Turris Mox module status and configuration bus (over SPI)
+
+  The driver finds the devices connected to the bus by itself, but it may be
+  needed to reference some of them from other parts of the device tree. In that
+  case the devices can be defined as subnodes of the moxtet node.
+
+properties:
+  compatible:
+    const: cznic,moxtet
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  spi-max-frequency: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - spi-cpol
+  - spi-cpha
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties:
+  type: object
+
+  required:
+    - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        moxtet@1 {
+            compatible = "cznic,moxtet";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gpiosb>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+            gpio@0 {
+                compatible = "cznic,moxtet-gpio";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0>;
+            };
+        };
+    };

Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml

@@ -70,7 +70,7 @@ properties:
       - const: ahb
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
+  "@[0-9a-f]+$":
     description: Devices attached to the bus
     type: object
 

Documentation/devicetree/bindings/bus/moxtet.txt

@@ -1,46 +0,0 @@
-Turris Mox module status and configuration bus (over SPI)
-
-Required properties:
- - compatible		: Should be "cznic,moxtet"
- - #address-cells	: Has to be 1
- - #size-cells		: Has to be 0
- - spi-cpol		: Required inverted clock polarity
- - spi-cpha		: Required shifted clock phase
- - interrupts		: Must contain reference to the shared interrupt line
- - interrupt-controller	: Required
- - #interrupt-cells	: Has to be 1
-
-For other required and optional properties of SPI slave nodes please refer to
-../spi/spi-bus.txt.
-
-Required properties of subnodes:
- - reg			: Should be position on the Moxtet bus (how many Moxtet
-			  modules are between this module and CPU module, so
-			  either 0 or a positive integer)
-
-The driver finds the devices connected to the bus by itself, but it may be
-needed to reference some of them from other parts of the device tree. In that
-case the devices can be defined as subnodes of the moxtet node.
-
-Example:
-
-	moxtet@1 {
-		compatible = "cznic,moxtet";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		spi-max-frequency = <10000000>;
-		spi-cpol;
-		spi-cpha;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gpiosb>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-
-		moxtet_sfp: gpio@0 {
-			compatible = "cznic,moxtet-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-		}
-	};

Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml

@@ -44,7 +44,7 @@ properties:
       Contains the firewall ID associated to the peripheral.
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
+  "@[0-9a-f]+$":
     description: Peripherals
     type: object
 

Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml

@@ -60,7 +60,7 @@ properties:
       Contains the firewall ID associated to the peripheral.
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
+  "@[0-9a-f]+$":
     description: Peripherals
     type: object
 

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml

@@ -132,7 +132,6 @@ examples:
                              "ahb_mp", "ahb_mali400";
     };
 
-
   - |
     clk@1c20068 {
         #clock-cells = <1>;

Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,ap80x-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada AP80x System Controller Clocks
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+  The AP806/AP807 is one of the two core HW blocks of the Marvell Armada
+  7K/8K/931x SoCs. It contains system controllers, which provide several
+  registers giving access to numerous features: clocks, pin-muxing and many
+  other SoC configuration items.
+
+properties:
+  compatible:
+    enum:
+      - marvell,ap806-clock
+      - marvell,ap806-cpu-clock
+      - marvell,ap807-clock
+      - marvell,ap807-cpu-clock
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: cluster 0 parent clock phandle
+      - description: cluster 1 parent clock phandle
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,ap806-cpu-clock
+              - marvell,ap807-cpu-clock
+    then:
+      required:
+        - clocks

Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,cp110-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada CP110 System Controller Clocks
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+  The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K/931x
+  SoCs. It contains system controllers, which provide several registers giving
+  access to numerous features: clocks, pin-muxing and many other SoC
+  configuration items.
+
+properties:
+  compatible:
+    const: marvell,cp110-clock
+
+  "#clock-cells":
+    const: 2
+    description: >
+      The first cell must be 0 or 1. 0 for the core clocks and 1 for the
+      gateable clocks. The second cell identifies the particular core clock or
+      gateable clocks.
+
+      The following clocks are available:
+
+        - Core clocks
+          - 0 0       APLL
+          - 0 1       PPv2 core
+          - 0 2       EIP
+          - 0 3       Core
+          - 0 4       NAND core
+          - 0 5       SDIO core
+
+        - Gateable clocks
+          - 1 0       Audio
+          - 1 1       Comm Unit
+          - 1 2       NAND
+          - 1 3       PPv2
+          - 1 4       SDIO
+          - 1 5       MG Domain
+          - 1 6       MG Core
+          - 1 7       XOR1
+          - 1 8       XOR0
+          - 1 9       GOP DP
+          - 1 11      PCIe x1 0
+          - 1 12      PCIe x1 1
+          - 1 13      PCIe x4
+          - 1 14      PCIe / XOR
+          - 1 15      SATA
+          - 1 16      SATA USB
+          - 1 17      Main
+          - 1 18      SD/MMC/GOP
+          - 1 21      Slow IO (SPI, NOR, BootROM, I2C, UART)
+          - 1 22      USB3H0
+          - 1 23      USB3H1
+          - 1 24      USB3 Device
+          - 1 25      EIP150
+          - 1 26      EIP197
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false

Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml

@@ -37,7 +37,7 @@ properties:
   '#clock-cells':
     const: 1
 
-  "#reset-cells":
+  '#reset-cells':
     const: 1
 
   nvidia,external-memory-controller:
@@ -46,7 +46,7 @@ properties:
       phandle of the external memory controller node
 
 patternProperties:
-  "^emc-timings-[0-9]+$":
+  '^emc-timings-[0-9]+$':
     type: object
     properties:
       nvidia,ram-code:
@@ -56,7 +56,7 @@ patternProperties:
           this timing set is used for
 
     patternProperties:
-      "^timing-[0-9]+$":
+      '^timing-[0-9]+$':
         type: object
         properties:
           clock-frequency:
@@ -94,7 +94,7 @@ required:
   - compatible
   - reg
   - '#clock-cells'
-  - "#reset-cells"
+  - '#reset-cells'
 
 additionalProperties: false
 

Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml

@@ -39,11 +39,11 @@ properties:
   '#clock-cells':
     const: 1
 
-  "#reset-cells":
+  '#reset-cells':
     const: 1
 
 patternProperties:
-  "^(sclk)|(pll-[cem])$":
+  '^(sclk)|(pll-[cem])$':
     type: object
     properties:
       compatible:
@@ -76,7 +76,7 @@ required:
   - compatible
   - reg
   - '#clock-cells'
-  - "#reset-cells"
+  - '#reset-cells'
 
 additionalProperties: false
 

Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml

@@ -8,7 +8,7 @@ title: Qualcomm RPM Clock Controller
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml

@@ -99,7 +99,6 @@ properties:
       the datasheet.
     const: 1
 
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml

@@ -22,7 +22,6 @@ properties:
       - xlnx,clocking-wizard-v6.0
       - xlnx,versal-clk-wizard
 
-
   reg:
     maxItems: 1
 

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml

@@ -121,5 +121,4 @@ examples:
         };
     };
 
-
 ...

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml

@@ -121,5 +121,4 @@ examples:
         };
     };
 
-
 ...

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml

@@ -142,7 +142,6 @@ then:
     reset-names:
       minItems: 2
 
-
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml

@@ -25,7 +25,6 @@ description: |
   M  |-------|______|----|____________|   |________________|    |               |
   ___|__________________________________________________________|_______________|
 
-
   VIU: Video Input Unit
   ---------------------
 

Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml

@@ -56,22 +56,12 @@ properties:
       - const: cec
 
   interrupts:
-    items:
+    minItems: 5
-      - description: CEC TX interrupt
+    maxItems: 6
-      - description: CEC RX interrupt
-      - description: CEC stuck at low interrupt
-      - description: Wake-up interrupt
-      - description: Hotplug connected interrupt
-      - description: Hotplug removed interrupt
 
   interrupt-names:
-    items:
+    minItems: 5
-      - const: cec-tx
+    maxItems: 6
-      - const: cec-rx
-      - const: cec-low
-      - const: wakeup
-      - const: hpd-connected
-      - const: hpd-removed
 
   ddc:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -112,6 +102,61 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2711-hdmi0
+              - brcm,bcm2711-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Wake-up interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupt-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: wakeup
+            - const: hpd-connected
+            - const: hpd-removed
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2712-hdmi0
+              - brcm,bcm2712-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupts-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: hpd-connected
+            - const: hpd-removed
+
+      required:
+        - interrupts
+        - interrupt-names
+
 examples:
   - |
     hdmi0: hdmi@7ef00700 {
@@ -136,6 +181,9 @@ examples:
                     "hd";
         clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
         clock-names = "hdmi", "bvb", "audio", "cec";
+        interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+        interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup",
+                          "hpd-connected", "hpd-removed";
         resets = <&dvp 0>;
         ddc = <&ddc0>;
     };

Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml

@@ -20,11 +20,20 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
 
   clocks:
-    maxItems: 1
+    minItems: 1
-    description: Core Clock
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -33,18 +42,69 @@ required:
 
 additionalProperties: false
 
-if:
+allOf:
+  - if:
       properties:
         compatible:
           contains:
-        enum:
+            const: brcm,bcm2711-hvs
-          - brcm,bcm2711-hvs
+
-          - brcm,bcm2712-hvs
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Core Clock
+        interrupts:
+          maxItems: 1
+        clock-names: false
+        interrupt-names: false
 
-then:
       required:
         - clocks
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2712-hvs
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: core
+            - const: disp
+        interrupts:
+          items:
+            - description: Channel 0 End of frame
+            - description: Channel 1 End of frame
+            - description: Channel 2 End of frame
+        interrupt-names:
+          items:
+            - const: ch0-eof
+            - const: ch1-eof
+            - const: ch2-eof
+      required:
+        - clocks
+        - clock-names
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2835-hvs
+
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        clock-names: false
+        interrupt-names: false
+
 examples:
   - |
     hvs@7e400000 {

Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml

@@ -156,7 +156,6 @@ else:
     adi,input-style: false
     adi,input-justification: false
 
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml

@@ -131,7 +131,6 @@ required:
 
 additionalProperties: false
 
-
 examples:
   - |
     lvds-encoder {

Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Parade PS8622/PS8625 DisplayPort to LVDS Converter
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Silicon Image SiI8620 HDMI/MHL bridge
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml

@@ -123,7 +123,6 @@ properties:
       - required:
           - port@1
 
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/ilitek,ili9486.yaml

@@ -54,7 +54,6 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-
             display@0{
                     compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
                     reg = <0>;

Documentation/devicetree/bindings/display/msm/gpu.yaml

@@ -133,7 +133,6 @@ properties:
       For GMU attached devices a phandle to the GMU device that will
       control the power for the GPU.
 
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm SM8750 Display MDSS
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description:
   SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like

Documentation/devicetree/bindings/display/panel/panel-timing.yaml

@@ -41,7 +41,6 @@ description: |
   |       |          |        v                            |          |
   +-------+----------+-------------------------------------+----------+
 
-
   The following is the panel timings shown with time on the x-axis.
   This matches the timing diagrams often found in data sheets.
 

Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml

@@ -38,7 +38,6 @@ description: |+
   The serial protocol has line names that resemble I2C but the
   protocol is not I2C but 3WIRE SPI.
 
-
 allOf:
   - $ref: panel-common.yaml#
   - $ref: /schemas/spi/spi-peripheral-props.yaml#

Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml

@@ -125,7 +125,6 @@ examples:
         power-domains = <&power RK3588_PD_VO0>;
         #sound-dai-cells = <0>;
 
-
         ports {
           #address-cells = <1>;
           #size-cells = <0>;

Documentation/devicetree/bindings/display/simple-framebuffer.yaml

@@ -181,7 +181,6 @@ allOf:
       required:
         - amlogic,pipeline
 
-
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apm,xgene-storm-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene Storm SoC DMA
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-storm-dma
+
+  reg:
+    items:
+      - description: DMA control and status registers
+      - description: Descriptor ring control and status registers
+      - description: Descriptor ring command registers
+      - description: SoC efuse registers
+
+  interrupts:
+    items:
+      - description: DMA error reporting interrupt
+      - description: DMA channel 0 completion interrupt
+      - description: DMA channel 1 completion interrupt
+      - description: DMA channel 2 completion interrupt
+      - description: DMA channel 3 completion interrupt
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@1f270000 {
+        compatible = "apm,xgene-storm-dma";
+        reg = <0x1f270000 0x10000>,
+              <0x1f200000 0x10000>,
+              <0x1b000000 0x400000>,
+              <0x1054a000 0x100>;
+        interrupts = <0x0 0x82 0x4>,
+                    <0x0 0xb8 0x4>,
+                    <0x0 0xb9 0x4>,
+                    <0x0 0xba 0x4>,
+                    <0x0 0xbb 0x4>;
+        dma-coherent;
+        clocks = <&dmaclk 0>;
+    };

Documentation/devicetree/bindings/dma/apm-xgene-dma.txt

@@ -1,47 +0,0 @@
-Applied Micro X-Gene SoC DMA nodes
-
-DMA nodes are defined to describe on-chip DMA interfaces in
-APM X-Gene SoC.
-
-Required properties for DMA interfaces:
-- compatible: Should be "apm,xgene-dma".
-- device_type: set to "dma".
-- reg: Address and length of the register set for the device.
-  It contains the information of registers in the following order:
-  1st - DMA control and status register address space.
-  2nd - Descriptor ring control and status register address space.
-  3rd - Descriptor ring command register address space.
-  4th - Soc efuse register address space.
-- interrupts: DMA has 5 interrupts sources. 1st interrupt is
-  DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
-  are completion interrupts for each DMA channels.
-- clocks: Reference to the clock entry.
-
-Optional properties:
-- dma-coherent : Present if dma operations are coherent
-
-Example:
-	dmaclk: dmaclk@1f27c000 {
-		compatible = "apm,xgene-device-clock";
-		#clock-cells = <1>;
-		clocks = <&socplldiv2 0>;
-		reg = <0x0 0x1f27c000 0x0 0x1000>;
-		reg-names = "csr-reg";
-		clock-output-names = "dmaclk";
-	};
-
-	dma: dma@1f270000 {
-			compatible = "apm,xgene-storm-dma";
-			device_type = "dma";
-			reg = <0x0 0x1f270000 0x0 0x10000>,
-			      <0x0 0x1f200000 0x0 0x10000>,
-			      <0x0 0x1b000000 0x0 0x400000>,
-			      <0x0 0x1054a000 0x0 0x100>;
-			interrupts = <0x0 0x82 0x4>,
-				     <0x0 0xb8 0x4>,
-				     <0x0 0xb9 0x4>,
-				     <0x0 0xba 0x4>,
-				     <0x0 0xbb 0x4>;
-			dma-coherent;
-			clocks = <&dmaclk 0>;
-	};

Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml

@@ -22,7 +22,6 @@ properties:
               - renesas,r9a06g032-dma
           - const: renesas,rzn1-dma
 
-
   "#dma-cells":
     minimum: 3
     maximum: 4

Documentation/devicetree/bindings/dma/stericsson,dma40.yaml

@@ -120,7 +120,6 @@ properties:
           - description: LCPA memory base, deprecated, use eSRAM pool instead
         deprecated: true
 
-
   reg-names:
     oneOf:
       - items:

Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml

@@ -48,7 +48,6 @@ description: |
               by transfer completion. This must only be used on channels
               managing transfers for STM32 USART/UART.
 
-
 maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
 

Documentation/devicetree/bindings/dts-coding-style.rst

@@ -120,7 +120,8 @@ The following order of properties in device nodes is preferred:
 4. Standard/common properties (defined by common bindings, e.g. without
    vendor-prefixes)
 5. Vendor-specific properties
-6. "status" (if applicable)
+6. "status" (if applicable), preceded by a blank line if there is content
+   before the property
 7. Child nodes, where each node is preceded with a blank line
 
 The "status" property is by default "okay", thus it can be omitted.
@@ -150,6 +151,7 @@ Example::
 		#address-cells = <1>;
 		#size-cells = <1>;
 		vendor,custom-property = <2>;
+
 		status = "disabled";
 
 		child_node: child-class@100 {
@@ -165,6 +167,7 @@ Example::
 		vdd-1v8-supply = <&board_vreg4>;
 		vdd-3v3-supply = <&board_vreg2>;
 		vdd-12v-supply = <&board_vreg3>;
+
 		status = "okay";
 	}
 

Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml

@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Altera SoCFPGA ECC Manager
 
 maintainers:
-  - Matthew Gerlach <matthew.gerlach@altera.com>
+  - Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
 
 description:
   This binding describes the device tree nodes required for the Altera SoCFPGA

Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml

@@ -97,7 +97,6 @@ patternProperties:
       - reg
       - memory-controller
 
-
   '^edacpmd@':
     description: PMD subnode
     type: object

Documentation/devicetree/bindings/eeprom/at25.yaml

@@ -25,6 +25,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - anvo,anv32c81w
               - anvo,anv32e61w
               - atmel,at25256B
               - fujitsu,mb85rs1mt

Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml

@@ -23,7 +23,6 @@ description: |
   The authoritative guest-side hardware interface documentation to the fw_cfg
   device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
 
-
 properties:
   compatible:
     const: qemu,fw-cfg-mmio

Documentation/devicetree/bindings/fpga/fpga-region.yaml

@@ -18,7 +18,6 @@ description: |
    - Supported Use Models
    - Constraints
 
-
   Introduction
   ============
 
@@ -31,7 +30,6 @@ description: |
   document isn't a replacement for any manufacturers specifications for FPGA
   usage.
 
-
   Terminology
   ===========
 
@@ -108,7 +106,6 @@ description: |
   a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
   reprogrammed independently while the rest of the system continues to function.
 
-
   Sequence
   ========
 
@@ -124,7 +121,6 @@ description: |
   When the overlay is removed, the child nodes will be removed and the FPGA Region
   will disable the bridges.
 
-
   FPGA Region
   ===========
 
@@ -170,7 +166,6 @@ description: |
   hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
   within the static image of the FPGA.
 
-
   Supported Use Models
   ====================
 

Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/lattice,ice40-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lattice iCE40 FPGA Manager
+
+maintainers:
+  - Joel Holdsworth <joel@airwebreathe.org.uk>
+
+properties:
+  compatible:
+    const: lattice,ice40-fpga-mgr
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    minimum: 1000000
+    maximum: 25000000
+
+  cdone-gpios:
+    maxItems: 1
+    description: GPIO input connected to CDONE pin
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Active-low GPIO output connected to CRESET_B pin. Note that unless the
+      GPIO is held low during startup, the FPGA will enter Master SPI mode and
+      drive SCK with a clock signal potentially jamming other devices on the bus
+      until the firmware is loaded.
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - cdone-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fpga@0 {
+            compatible = "lattice,ice40-fpga-mgr";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+        };
+    };

Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt

@@ -1,21 +0,0 @@
-Lattice iCE40 FPGA Manager
-
-Required properties:
-- compatible:		Should contain "lattice,ice40-fpga-mgr"
-- reg:			SPI chip select
-- spi-max-frequency:	Maximum SPI frequency (>=1000000, <=25000000)
-- cdone-gpios:		GPIO input connected to CDONE pin
-- reset-gpios:		Active-low GPIO output connected to CRESET_B pin. Note
-			that unless the GPIO is held low during startup, the
-			FPGA will enter Master SPI mode and drive SCK with a
-			clock signal potentially jamming other devices on the
-			bus until the firmware is loaded.
-
-Example:
-	fpga: fpga@0 {
-		compatible = "lattice,ice40-fpga-mgr";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-	};

Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml

@@ -66,5 +66,4 @@ examples:
         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
     };
 
-
 ...

Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml

@@ -22,7 +22,6 @@ description: |
                  ___                     ________
   chip select#      |___________________|
 
-
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 

Documentation/devicetree/bindings/gpio/gpio-mxs.yaml

@@ -28,6 +28,7 @@ properties:
 
   '#address-cells':
     const: 1
+
   '#size-cells':
     const: 0
 
@@ -35,7 +36,7 @@ properties:
     maxItems: 1
 
 patternProperties:
-  "^(?!gpio@)[^@]+@[0-9]+$":
+  '^(?!gpio@)[^@]+@[0-9]+$':
     type: object
     properties:
       fsl,pinmux-ids:
@@ -93,7 +94,7 @@ patternProperties:
 
     additionalProperties: false
 
-  "^gpio@[0-9]+$":
+  '^gpio@[0-9]+$':
     type: object
     properties:
       compatible:
@@ -110,10 +111,10 @@ patternProperties:
 
       interrupt-controller: true
 
-      "#interrupt-cells":
+      '#interrupt-cells':
         const: 2
 
-      "#gpio-cells":
+      '#gpio-cells':
         const: 2
 
       gpio-controller: true
@@ -123,8 +124,8 @@ patternProperties:
       - reg
       - interrupts
       - interrupt-controller
-      - "#interrupt-cells"
+      - '#interrupt-cells'
-      - "#gpio-cells"
+      - '#gpio-cells'
       - gpio-controller
 
     additionalProperties: false

Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml

@@ -111,8 +111,8 @@ additionalProperties: false
 required:
   - compatible
   - reg
-  - "#address-cells"
+  - '#address-cells'
-  - "#size-cells"
+  - '#size-cells'
 
 examples:
   - |

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -22,6 +22,7 @@ properties:
               - mediatek,mt8183-mali
               - mediatek,mt8183b-mali
               - mediatek,mt8186-mali
+              - mediatek,mt8365-mali
               - realtek,rtd1619-mali
               - renesas,r9a07g044-mali
               - renesas,r9a07g054-mali

Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml

@@ -81,7 +81,6 @@ required:
   - compatible
   - reg
 
-
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/hwmon/adi,max31827.yaml

@@ -93,7 +93,6 @@ allOf:
         adi,fault-q:
           default: 4
 
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/hwmon/national,lm90.yaml

@@ -45,7 +45,6 @@ properties:
       - ti,tmp461
       - winbond,w83l771
 
-
   interrupts:
     items:
       - description: |

Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml

@@ -20,7 +20,6 @@ description: |
   https://www.ti.com/lit/gpn/tmp513
   https://www.ti.com/lit/gpn/tmp512
 
-
 properties:
   compatible:
     enum:

Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml

@@ -15,7 +15,6 @@ description: |
   Datasheets:
   https://www.ti.com/lit/gpn/tps23861
 
-
 properties:
   compatible:
     enum:

Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml

@@ -27,7 +27,6 @@ description: |+
       |   '------' |                  | dev |  | dev |  | dev |
       '------------'                  '-----'  '-----'  '-----'
 
-
 allOf:
   - $ref: /schemas/i2c/i2c-mux.yaml#
 

Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml

@@ -9,7 +9,7 @@ title: Qualcomm Universal Peripheral (QUP) I2C controller
 maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#

Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml

@@ -64,7 +64,6 @@ patternProperties:
     required:
       - reg
 
-
 allOf:
   - if:
       properties:

Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml

@@ -16,7 +16,6 @@ description: |
   can be selected by writing the appropriate device number to an I2C config
   register.
 
-
       +--------------------------------------------------+
       | Mule                                             |
   0x18|    +---------------+                             |
@@ -34,7 +33,6 @@ description: |
       |                        |__/          +--------+  |
       +--------------------------------------------------+
 
-
 allOf:
   - $ref: /schemas/i2c/i2c-mux.yaml#
 

Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml

@@ -30,7 +30,6 @@ description: |
   * https://www.analog.com/en/products/adaq4380-4.html
   * https://www.analog.com/en/products/adaq4381-4.html
 
-
 $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -166,7 +166,6 @@ properties:
       An example of backend can be found at
       http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
 
-
 patternProperties:
   "^channel@[1-8]$":
     type: object

Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml

@@ -48,7 +48,6 @@ properties:
     enum: [2500000, 4096000]
     default: 4096000
 
-
   '#io-channel-cells':
     const: 1
 

Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml

@@ -57,7 +57,6 @@ properties:
     description: External clock source when not using crystal
     maxItems: 1
 
-
   "#clock-cells":
     description:
       ADE9000 can provide clock output via CLKOUT pin with external buffer.

Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml

@@ -36,7 +36,6 @@ properties:
   "#io-channel-cells":
     const: 1
 
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml

@@ -456,7 +456,6 @@ patternProperties:
               items:
                 minimum: 40
 
-
       - if:
           properties:
             compatible:

Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml

@@ -57,7 +57,6 @@ description: |
    4 | batt_dischrg_i
    5 | ts_v
 
-
 properties:
   compatible:
     oneOf:

Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml

@@ -29,7 +29,6 @@ description: |
             |
            GND
 
-
 properties:
   compatible:
     const: voltage-divider

Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml

@@ -37,7 +37,6 @@ required:
   - compatible
   - reg
 
-
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 

Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml

@@ -12,7 +12,6 @@ maintainers:
 description: |
   Pressure sensor from Murata with SPI and I2C bus interfaces.
 
-
 properties:
   compatible:
     const: murata,zpa2326

Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml

@@ -78,7 +78,6 @@ properties:
     minItems: 3
     maxItems: 3
 
-
   semtech,ph01-resolution:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [8, 16, 32, 64, 128, 256, 512, 1024]

Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml

@@ -39,7 +39,6 @@ $defs:
       - reg
       - adi,sensor-type
 
-
 properties:
   compatible:
     oneOf:
@@ -88,7 +87,7 @@ properties:
     const: 0
 
 patternProperties:
-  "^thermocouple@":
+  '^thermocouple@':
     $ref: '#/$defs/sensor-node'
     unevaluatedProperties: false
 
@@ -146,7 +145,7 @@ patternProperties:
           required:
             - adi,custom-thermocouple
 
-  "^diode@":
+  '^diode@':
     $ref: '#/$defs/sensor-node'
     unevaluatedProperties: false
 
@@ -191,7 +190,7 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/uint32
         default: 0
 
-  "^rtd@":
+  '^rtd@':
     $ref: '#/$defs/sensor-node'
     unevaluatedProperties: false
     description: RTD sensor.
@@ -280,7 +279,7 @@ patternProperties:
               type: boolean
 
           dependencies:
-            adi,current-rotate: [ "adi,rsense-share" ]
+            adi,current-rotate: [ 'adi,rsense-share' ]
 
       - if:
           properties:
@@ -290,7 +289,7 @@ patternProperties:
           required:
             - adi,custom-rtd
 
-  "^thermistor@":
+  '^thermistor@':
     $ref: '#/$defs/sensor-node'
     unevaluatedProperties: false
     description: Thermistor sensor.
@@ -364,7 +363,7 @@ patternProperties:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ "adi,rsense-share" ]
+      adi,current-rotate: [ 'adi,rsense-share' ]
 
     allOf:
       - if:
@@ -392,7 +391,7 @@ patternProperties:
           required:
             - adi,custom-thermistor
 
-  "^adc@":
+  '^adc@':
     $ref: '#/$defs/sensor-node'
     unevaluatedProperties: false
     description: Direct ADC sensor.
@@ -407,7 +406,7 @@ patternProperties:
         description: Whether the sensor is single-ended.
         type: boolean
 
-  "^temp@":
+  '^temp@':
     $ref: '#/$defs/sensor-node'
     unevaluatedProperties: false
     description: Active analog temperature sensor.
@@ -437,7 +436,7 @@ patternProperties:
     required:
       - adi,custom-temp
 
-  "^rsense@":
+  '^rsense@':
     $ref: '#/$defs/sensor-node'
     unevaluatedProperties: false
     description: Sense resistor sensor.
@@ -476,7 +475,7 @@ allOf:
               - adi,ltc2984
     then:
       patternProperties:
-        "^temp@": false
+        '^temp@': false
 
 examples:
   - |

Documentation/devicetree/bindings/input/cypress,cyapa.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/input/ti,drv266x.yaml

@@ -37,7 +37,6 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;

Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ST-Microelectronics FingerTip touchscreen controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description:
   The ST-Microelectronics FingerTip device provides a basic touchscreen

Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Interconnect Bandwidth Monitor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   Bandwidth Monitor measures current throughput on buses between various NoC

Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml

@@ -122,7 +122,6 @@ allOf:
       required:
         - reg
 
-
 unevaluatedProperties: false
 
 examples:

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml

@@ -305,7 +305,6 @@ examples:
       };
     };
 
-
     device@0 {
       reg = <0 4>;
       interrupts = <1 1 4 &part0>;

Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml

@@ -54,7 +54,6 @@ properties:
                                |         |---...
                                +---------+---module31
 
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml

@@ -34,8 +34,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupt-controller
-  - '#interrupt-cells'
 
 additionalProperties: false
 

Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml

@@ -20,6 +20,7 @@ properties:
               - fsl,imx8qm-irqsteer
               - fsl,imx8qxp-irqsteer
               - fsl,imx94-irqsteer
+              - fsl,imx95-irqsteer
           - const: fsl,imx-irqsteer
 
   reg:
@@ -87,6 +88,7 @@ allOf:
               - fsl,imx8mp-irqsteer
               - fsl,imx8qm-irqsteer
               - fsl,imx8qxp-irqsteer
+              - fsl,imx95-irqsteer
     then:
       required:
         - power-domains

Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml

@@ -14,7 +14,6 @@ description:
   Vybrid SoC's but is only really useful in dual core configurations (VF6xx
   which comes with a Cortex-A5/Cortex-M4 combination).
 
-
 maintainers:
   - Frank Li <Frank.Li@nxp.com>
 

Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

@@ -78,7 +78,6 @@ required:
   - '#interrupt-cells'
   - loongson,parent_int_map
 
-
 unevaluatedProperties: false
 
 if:

Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml

@@ -18,7 +18,6 @@ description:
   flush command is executed. With CIRQ, MCUSYS can be completely turned off
   to improve the system power consumption without losing interrupts.
 
-
 properties:
   compatible:
     items:

Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml

@@ -26,7 +26,6 @@ properties:
           - mscc,ocelot-icpu-intr
           - mscc,serval-icpu-intr
 
-
   '#interrupt-cells':
     const: 1
 

Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml

@@ -61,6 +61,7 @@ properties:
               - anlogic,dr1v90-plic
               - canaan,k210-plic
               - eswin,eic7700-plic
+              - microchip,pic64gx-plic
               - sifive,fu540-c000-plic
               - spacemit,k1-plic
               - starfive,jh7100-plic

Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI OMAP4 Wake-up Generator
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: >
   All TI OMAP4/5 (and their derivatives) are interrupt controllers that route

Documentation/devicetree/bindings/iommu/arm,smmu.yaml

@@ -640,7 +640,6 @@ examples:
                      <&smmu1 7>;
     };
 
-
     /* SMMU with stream matching */
     smmu2: iommu@ba5f0000 {
             compatible = "arm,smmu-v1";
@@ -666,7 +665,6 @@ examples:
             iommus = <&smmu2 1 0x30>;
     };
 
-
     /* ARM MMU-500 with 10-bit stream ID input configuration */
     smmu3: iommu@ba600000 {
             compatible = "arm,mmu-500", "arm,smmu-v2";
@@ -687,8 +685,6 @@ examples:
             /* bus whose child devices emit one unique 10-bit stream
                ID each, but may master through multiple SMMU TBUs */
             iommu-map = <0 &smmu3 0 0x400>;
-
-
     };
 
   - |+

Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PM8058 PMIC LED
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Qualcomm PM8058 contains an LED block for up to six LEDs:: three normal

Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/apm,xgene-slimpro-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SLIMpro mailbox
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description:
+  The APM X-Gene SLIMpro mailbox is used to communicate messages between
+  the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple
+  interrupt based door bell mechanism and can exchange simple messages using the
+  internal registers.
+
+properties:
+  compatible:
+    const: apm,xgene-slimpro-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: mailbox channel 0 doorbell
+      - description: mailbox channel 1 doorbell
+      - description: mailbox channel 2 doorbell
+      - description: mailbox channel 3 doorbell
+      - description: mailbox channel 4 doorbell
+      - description: mailbox channel 5 doorbell
+      - description: mailbox channel 6 doorbell
+      - description: mailbox channel 7 doorbell
+
+  '#mbox-cells':
+    description: Number of mailbox channel.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@10540000 {
+        compatible = "apm,xgene-slimpro-mbox";
+        reg = <0x10540000 0xa000>;
+        #mbox-cells = <1>;
+        interrupts = <0x0 0x0 0x4>,
+                     <0x0 0x1 0x4>,
+                     <0x0 0x2 0x4>,
+                     <0x0 0x3 0x4>,
+                     <0x0 0x4 0x4>,
+                     <0x0 0x5 0x4>,
+                     <0x0 0x6 0x4>,
+                     <0x0 0x7 0x4>;
+    };

Documentation/devicetree/bindings/mailbox/arm,mhu.yaml

@@ -52,7 +52,6 @@ properties:
           - const: arm,mhu-doorbell
           - const: arm,primecell
 
-
   reg:
     maxItems: 1
 

Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml

@@ -127,7 +127,6 @@ properties:
         - minimum: 0
           maximum: 124
 
-
   '#mbox-cells':
     description: |
       It is always set to 2. The first argument in the consumers 'mboxes'