mirror of https://github.com/torvalds/linux.git
dt-bindings: interrupt-controller: Convert brcm,bcm2835-armctrl-ic to DT schema
Convert the Broadcom BCM2835 ARMCTRL interrupt controller binding to schema format. It's a straight-forward conversion of the typical interrupt controller. Link: https://lore.kernel.org/r/20250505144618.1287539-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This commit is contained in:
Rob Herring (Arm)
parent
66eb172b5e
commit
5511d95c05
|
|
@ -1,131 +0,0 @@
|
|||
BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
|
||||
|
||||
The BCM2835 contains a custom top-level interrupt controller, which supports
|
||||
72 interrupt sources using a 2-level register scheme. The interrupt
|
||||
controller, or the HW block containing it, is referred to occasionally
|
||||
as "armctrl" in the SoC documentation, hence naming of this binding.
|
||||
|
||||
The BCM2836 contains the same interrupt controller with the same
|
||||
interrupts, but the per-CPU interrupt controller is the root, and an
|
||||
interrupt there indicates that the ARMCTRL has an interrupt to handle.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "brcm,bcm2835-armctrl-ic" or
|
||||
"brcm,bcm2836-armctrl-ic"
|
||||
- reg : Specifies base physical address and size of the registers.
|
||||
- interrupt-controller : Identifies the node as an interrupt controller
|
||||
- #interrupt-cells : Specifies the number of cells needed to encode an
|
||||
interrupt source. The value shall be 2.
|
||||
|
||||
The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
|
||||
pending" register, or 1/2 respectively for interrupts in the "IRQ pending
|
||||
1/2" register.
|
||||
|
||||
The 2nd cell contains the interrupt number within the bank. Valid values
|
||||
are 0..7 for bank 0, and 0..31 for bank 1.
|
||||
|
||||
Additional required properties for brcm,bcm2836-armctrl-ic:
|
||||
- interrupts : Specifies the interrupt on the parent for this interrupt
|
||||
controller to handle.
|
||||
|
||||
The interrupt sources are as follows:
|
||||
|
||||
Bank 0:
|
||||
0: ARM_TIMER
|
||||
1: ARM_MAILBOX
|
||||
2: ARM_DOORBELL_0
|
||||
3: ARM_DOORBELL_1
|
||||
4: VPU0_HALTED
|
||||
5: VPU1_HALTED
|
||||
6: ILLEGAL_TYPE0
|
||||
7: ILLEGAL_TYPE1
|
||||
|
||||
Bank 1:
|
||||
0: TIMER0
|
||||
1: TIMER1
|
||||
2: TIMER2
|
||||
3: TIMER3
|
||||
4: CODEC0
|
||||
5: CODEC1
|
||||
6: CODEC2
|
||||
7: VC_JPEG
|
||||
8: ISP
|
||||
9: VC_USB
|
||||
10: VC_3D
|
||||
11: TRANSPOSER
|
||||
12: MULTICORESYNC0
|
||||
13: MULTICORESYNC1
|
||||
14: MULTICORESYNC2
|
||||
15: MULTICORESYNC3
|
||||
16: DMA0
|
||||
17: DMA1
|
||||
18: VC_DMA2
|
||||
19: VC_DMA3
|
||||
20: DMA4
|
||||
21: DMA5
|
||||
22: DMA6
|
||||
23: DMA7
|
||||
24: DMA8
|
||||
25: DMA9
|
||||
26: DMA10
|
||||
27: DMA11-14 - shared interrupt for DMA 11 to 14
|
||||
28: DMAALL - triggers on all dma interrupts (including channel 15)
|
||||
29: AUX
|
||||
30: ARM
|
||||
31: VPUDMA
|
||||
|
||||
Bank 2:
|
||||
0: HOSTPORT
|
||||
1: VIDEOSCALER
|
||||
2: CCP2TX
|
||||
3: SDC
|
||||
4: DSI0
|
||||
5: AVE
|
||||
6: CAM0
|
||||
7: CAM1
|
||||
8: HDMI0
|
||||
9: HDMI1
|
||||
10: PIXELVALVE1
|
||||
11: I2CSPISLV
|
||||
12: DSI1
|
||||
13: PWA0
|
||||
14: PWA1
|
||||
15: CPR
|
||||
16: SMI
|
||||
17: GPIO0
|
||||
18: GPIO1
|
||||
19: GPIO2
|
||||
20: GPIO3
|
||||
21: VC_I2C
|
||||
22: VC_SPI
|
||||
23: VC_I2SPCM
|
||||
24: VC_SDIO
|
||||
25: VC_UART
|
||||
26: SLIMBUS
|
||||
27: VEC
|
||||
28: CPG
|
||||
29: RNG
|
||||
30: VC_ARASANSDIO
|
||||
31: AVSPMON
|
||||
|
||||
Example:
|
||||
|
||||
/* BCM2835, first level */
|
||||
intc: interrupt-controller {
|
||||
compatible = "brcm,bcm2835-armctrl-ic";
|
||||
reg = <0x7e00b200 0x200>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
/* BCM2836, second level */
|
||||
intc: interrupt-controller {
|
||||
compatible = "brcm,bcm2836-armctrl-ic";
|
||||
reg = <0x7e00b200 0x200>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
interrupt-parent = <&local_intc>;
|
||||
interrupts = <8>;
|
||||
};
|
||||
|
|
@ -0,0 +1,162 @@
|
|||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: BCM2835 ARMCTRL Interrupt Controller
|
||||
|
||||
maintainers:
|
||||
- Florian Fainelli <florian.fainelli@broadcom.com>
|
||||
- Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
|
||||
|
||||
description: >
|
||||
The BCM2835 contains a custom top-level interrupt controller, which supports
|
||||
72 interrupt sources using a 2-level register scheme. The interrupt
|
||||
controller, or the HW block containing it, is referred to occasionally as
|
||||
"armctrl" in the SoC documentation, hence naming of this binding.
|
||||
|
||||
The BCM2836 contains the same interrupt controller with the same interrupts,
|
||||
but the per-CPU interrupt controller is the root, and an interrupt there
|
||||
indicates that the ARMCTRL has an interrupt to handle.
|
||||
|
||||
The interrupt sources are as follows:
|
||||
|
||||
Bank 0:
|
||||
0: ARM_TIMER
|
||||
1: ARM_MAILBOX
|
||||
2: ARM_DOORBELL_0
|
||||
3: ARM_DOORBELL_1
|
||||
4: VPU0_HALTED
|
||||
5: VPU1_HALTED
|
||||
6: ILLEGAL_TYPE0
|
||||
7: ILLEGAL_TYPE1
|
||||
|
||||
Bank 1:
|
||||
0: TIMER0
|
||||
1: TIMER1
|
||||
2: TIMER2
|
||||
3: TIMER3
|
||||
4: CODEC0
|
||||
5: CODEC1
|
||||
6: CODEC2
|
||||
7: VC_JPEG
|
||||
8: ISP
|
||||
9: VC_USB
|
||||
10: VC_3D
|
||||
11: TRANSPOSER
|
||||
12: MULTICORESYNC0
|
||||
13: MULTICORESYNC1
|
||||
14: MULTICORESYNC2
|
||||
15: MULTICORESYNC3
|
||||
16: DMA0
|
||||
17: DMA1
|
||||
18: VC_DMA2
|
||||
19: VC_DMA3
|
||||
20: DMA4
|
||||
21: DMA5
|
||||
22: DMA6
|
||||
23: DMA7
|
||||
24: DMA8
|
||||
25: DMA9
|
||||
26: DMA10
|
||||
27: DMA11-14 - shared interrupt for DMA 11 to 14
|
||||
28: DMAALL - triggers on all dma interrupts (including channel 15)
|
||||
29: AUX
|
||||
30: ARM
|
||||
31: VPUDMA
|
||||
|
||||
Bank 2:
|
||||
0: HOSTPORT
|
||||
1: VIDEOSCALER
|
||||
2: CCP2TX
|
||||
3: SDC
|
||||
4: DSI0
|
||||
5: AVE
|
||||
6: CAM0
|
||||
7: CAM1
|
||||
8: HDMI0
|
||||
9: HDMI1
|
||||
10: PIXELVALVE1
|
||||
11: I2CSPISLV
|
||||
12: DSI1
|
||||
13: PWA0
|
||||
14: PWA1
|
||||
15: CPR
|
||||
16: SMI
|
||||
17: GPIO0
|
||||
18: GPIO1
|
||||
19: GPIO2
|
||||
20: GPIO3
|
||||
21: VC_I2C
|
||||
22: VC_SPI
|
||||
23: VC_I2SPCM
|
||||
24: VC_SDIO
|
||||
25: VC_UART
|
||||
26: SLIMBUS
|
||||
27: VEC
|
||||
28: CPG
|
||||
29: RNG
|
||||
30: VC_ARASANSDIO
|
||||
31: AVSPMON
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- brcm,bcm2835-armctrl-ic
|
||||
- brcm,bcm2836-armctrl-ic
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 2
|
||||
description: >
|
||||
The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
|
||||
pending" register, or 1/2 respectively for interrupts in the "IRQ pending
|
||||
1/2" register.
|
||||
|
||||
The 2nd cell contains the interrupt number within the bank. Valid values
|
||||
are 0..7 for bank 0, and 0..31 for bank 1.
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: brcm,bcm2836-armctrl-ic
|
||||
then:
|
||||
required:
|
||||
- interrupts
|
||||
else:
|
||||
properties:
|
||||
interrupts: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
interrupt-controller@7e00b200 {
|
||||
compatible = "brcm,bcm2835-armctrl-ic";
|
||||
reg = <0x7e00b200 0x200>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
- |
|
||||
interrupt-controller@7e00b200 {
|
||||
compatible = "brcm,bcm2836-armctrl-ic";
|
||||
reg = <0x7e00b200 0x200>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <8>;
|
||||
};
|
||||
Loading…
Reference in New Issue