PCI/P2PDMA: Provide an access to pci_p2pdma_map_type() function

Provide an access to pci_p2pdma_map_type() function to allow subsystems
to determine the appropriate mapping type for P2PDMA transfers between
a provider and target device.

The pci_p2pdma_map_type() function is the core P2P layer version of
the existing public, but struct page focused, pci_p2pdma_state()
function. It returns the same result. It is required to use the p2p
subsystem from drivers that don't use the struct page layer.

Like __pci_p2pdma_update_state() it is not an exported function. The
idea is that only subsystem code will implement mapping helpers for
taking in phys_addr_t lists, this is deliberately not made accessible
to every driver to prevent abuse.

Following patches will use this function to implement a shared DMA
mapping helper for DMABUF.

Tested-by: Alex Mastro <amastro@fb.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251120-dmabuf-vfio-v9-4-d7f71607f371@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>

drivers/pci/p2pdma.c

@@ -1060,8 +1060,18 @@ void pci_p2pmem_publish(struct pci_dev *pdev, bool publish)
 }
 EXPORT_SYMBOL_GPL(pci_p2pmem_publish);
 
-static enum pci_p2pdma_map_type
+/**
-pci_p2pdma_map_type(struct p2pdma_provider *provider, struct device *dev)
+ * pci_p2pdma_map_type - Determine the mapping type for P2PDMA transfers
+ * @provider: P2PDMA provider structure
+ * @dev: Target device for the transfer
+ *
+ * Determines how peer-to-peer DMA transfers should be mapped between
+ * the provider and the target device. The mapping type indicates whether
+ * the transfer can be done directly through PCI switches or must go
+ * through the host bridge.
+ */
+enum pci_p2pdma_map_type pci_p2pdma_map_type(struct p2pdma_provider *provider,
+					     struct device *dev)
 {
 	enum pci_p2pdma_map_type type = PCI_P2PDMA_MAP_NOT_SUPPORTED;
 	struct pci_dev *pdev = to_pci_dev(provider->owner);

include/linux/pci-p2pdma.h

@@ -26,6 +26,45 @@ struct p2pdma_provider {
 	u64 bus_offset;
 };
 
+enum pci_p2pdma_map_type {
+	/*
+	 * PCI_P2PDMA_MAP_UNKNOWN: Used internally as an initial state before
+	 * the mapping type has been calculated. Exported routines for the API
+	 * will never return this value.
+	 */
+	PCI_P2PDMA_MAP_UNKNOWN = 0,
+
+	/*
+	 * Not a PCI P2PDMA transfer.
+	 */
+	PCI_P2PDMA_MAP_NONE,
+
+	/*
+	 * PCI_P2PDMA_MAP_NOT_SUPPORTED: Indicates the transaction will
+	 * traverse the host bridge and the host bridge is not in the
+	 * allowlist. DMA Mapping routines should return an error when
+	 * this is returned.
+	 */
+	PCI_P2PDMA_MAP_NOT_SUPPORTED,
+
+	/*
+	 * PCI_P2PDMA_MAP_BUS_ADDR: Indicates that two devices can talk to
+	 * each other directly through a PCI switch and the transaction will
+	 * not traverse the host bridge. Such a mapping should program
+	 * the DMA engine with PCI bus addresses.
+	 */
+	PCI_P2PDMA_MAP_BUS_ADDR,
+
+	/*
+	 * PCI_P2PDMA_MAP_THRU_HOST_BRIDGE: Indicates two devices can talk
+	 * to each other, but the transaction traverses a host bridge on the
+	 * allowlist. In this case, a normal mapping either with CPU physical
+	 * addresses (in the case of dma-direct) or IOVA addresses (in the
+	 * case of IOMMUs) should be used to program the DMA engine.
+	 */
+	PCI_P2PDMA_MAP_THRU_HOST_BRIDGE,
+};
+
 #ifdef CONFIG_PCI_P2PDMA
 int pcim_p2pdma_init(struct pci_dev *pdev);
 struct p2pdma_provider *pcim_p2pdma_provider(struct pci_dev *pdev, int bar);
@@ -45,6 +84,8 @@ int pci_p2pdma_enable_store(const char *page, struct pci_dev **p2p_dev,
 			    bool *use_p2pdma);
 ssize_t pci_p2pdma_enable_show(char *page, struct pci_dev *p2p_dev,
 			       bool use_p2pdma);
+enum pci_p2pdma_map_type pci_p2pdma_map_type(struct p2pdma_provider *provider,
+					     struct device *dev);
 #else /* CONFIG_PCI_P2PDMA */
 static inline int pcim_p2pdma_init(struct pci_dev *pdev)
 {
@@ -106,6 +147,11 @@ static inline ssize_t pci_p2pdma_enable_show(char *page,
 {
 	return sprintf(page, "none\n");
 }
+static inline enum pci_p2pdma_map_type
+pci_p2pdma_map_type(struct p2pdma_provider *provider, struct device *dev)
+{
+	return PCI_P2PDMA_MAP_NOT_SUPPORTED;
+}
 #endif /* CONFIG_PCI_P2PDMA */
 
 
@@ -120,45 +166,6 @@ static inline struct pci_dev *pci_p2pmem_find(struct device *client)
 	return pci_p2pmem_find_many(&client, 1);
 }
 
-enum pci_p2pdma_map_type {
-	/*
-	 * PCI_P2PDMA_MAP_UNKNOWN: Used internally as an initial state before
-	 * the mapping type has been calculated. Exported routines for the API
-	 * will never return this value.
-	 */
-	PCI_P2PDMA_MAP_UNKNOWN = 0,
-
-	/*
-	 * Not a PCI P2PDMA transfer.
-	 */
-	PCI_P2PDMA_MAP_NONE,
-
-	/*
-	 * PCI_P2PDMA_MAP_NOT_SUPPORTED: Indicates the transaction will
-	 * traverse the host bridge and the host bridge is not in the
-	 * allowlist. DMA Mapping routines should return an error when
-	 * this is returned.
-	 */
-	PCI_P2PDMA_MAP_NOT_SUPPORTED,
-
-	/*
-	 * PCI_P2PDMA_MAP_BUS_ADDR: Indicates that two devices can talk to
-	 * each other directly through a PCI switch and the transaction will
-	 * not traverse the host bridge. Such a mapping should program
-	 * the DMA engine with PCI bus addresses.
-	 */
-	PCI_P2PDMA_MAP_BUS_ADDR,
-
-	/*
-	 * PCI_P2PDMA_MAP_THRU_HOST_BRIDGE: Indicates two devices can talk
-	 * to each other, but the transaction traverses a host bridge on the
-	 * allowlist. In this case, a normal mapping either with CPU physical
-	 * addresses (in the case of dma-direct) or IOVA addresses (in the
-	 * case of IOMMUs) should be used to program the DMA engine.
-	 */
-	PCI_P2PDMA_MAP_THRU_HOST_BRIDGE,
-};
-
 struct pci_p2pdma_map_state {
 	struct p2pdma_provider *mem;
 	enum pci_p2pdma_map_type map;